diff options
author | wdenk <wdenk> | 2003-03-06 00:02:04 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-03-06 00:02:04 (GMT) |
commit | 43d9616cffb4a130e1620e3e33fc9bc1bcabe399 (patch) | |
tree | ed55479a108ed16258d81be3e37d0edd74520520 /README | |
parent | 6069ff265362ef6239749b5f598b137f407b821e (diff) | |
download | u-boot-43d9616cffb4a130e1620e3e33fc9bc1bcabe399.tar.xz |
* Patch by Robert Schwebel, 21 Jan 2003:
- Add support for Innokom board
- Don't complain if "install" fails
- README cleanup (remove duplicated lines)
- Update PXA header files
* Add documentation for existing POST code (doc/README.POST)
* Patch by Laudney Ren, 15 Jan 2003:
Fix handling of redundand environment in "tools/envcrc.c"
* Patch by Detlev Zundel, 28 Feb 2003:
Add bedbug support for 824x systems
* Add support for 16 MB flash configuration of TRAB board
* Patch by Erwin Rol, 27 Feb 2003:
Add support for RTEMS
* Add image information to README
* Fix dual PCMCIA slot support (when running with just one
slot populated)
* Add VFD type detection to trab board
* extend drivers/cs8900.c driver to synchronize ethaddr environment
variable with value in the EEPROM
Diffstat (limited to 'README')
-rw-r--r-- | README | 375 |
1 files changed, 197 insertions, 178 deletions
@@ -395,10 +395,10 @@ The following options need to be configured: default environment. - Console Interface: - Depending on board, define exactly one serial port - (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, - CONFIG_8xx_CONS_SCC1, ...), or switch off the serial - console by defining CONFIG_8xx_CONS_NONE + Depending on board, define exactly one serial port + (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, + CONFIG_8xx_CONS_SCC1, ...), or switch off the serial + console by defining CONFIG_8xx_CONS_NONE Note: if CONFIG_8xx_CONS_NONE is defined, the serial port routines must be defined elsewhere @@ -443,9 +443,9 @@ The following options need to be configured: addional board info beside the logo - When CONFIG_CFB_CONSOLE is defined, video console is - default i/o. Serial console can be forced with - environment 'console=serial'. + When CONFIG_CFB_CONSOLE is defined, video console is + default i/o. Serial console can be forced with + environment 'console=serial'. - Console Baudrate: CONFIG_BAUDRATE - in bps @@ -489,15 +489,15 @@ The following options need to be configured: within "Boot Delay" after reset. CONFIG_BOOTARGS - This can be used to pass arguments to the bootm - command. The value of CONFIG_BOOTARGS goes into the - environment value "bootargs". + This can be used to pass arguments to the bootm + command. The value of CONFIG_BOOTARGS goes into the + environment value "bootargs". CONFIG_RAMBOOT and CONFIG_NFSBOOT - The value of these goes into the environment as - "ramboot" and "nfsboot" respectively, and can be used - as a convenience, when switching between booting from - ram and nfs. + The value of these goes into the environment as + "ramboot" and "nfsboot" respectively, and can be used + as a convenience, when switching between booting from + ram and nfs. - Pre-Boot Commands: CONFIG_PREBOOT @@ -596,13 +596,13 @@ The following options need to be configured: Note: Don't enable the "icache" and "dcache" commands - (configuration option CFG_CMD_CACHE) unless you know - what you (and your U-Boot users) are doing. Data - cache cannot be enabled on systems like the 8xx or - 8260 (where accesses to the IMMR region must be - uncached), and it cannot be disabled on all other - systems where we (mis-) use the data cache to hold an - initial stack and some data. + (configuration option CFG_CMD_CACHE) unless you know + what you (and your U-Boot users) are doing. Data + cache cannot be enabled on systems like the 8xx or + 8260 (where accesses to the IMMR region must be + uncached), and it cannot be disabled on all other + systems where we (mis-) use the data cache to hold an + initial stack and some data. XXX - this list needs to get updated! @@ -628,10 +628,10 @@ The following options need to be configured: - Timestamp Support: - When CONFIG_TIMESTAMP is selected, the timestamp - (date and time) of an image is printed by image - commands like bootm or iminfo. This option is - automatically enabled when you select CFG_CMD_DATE . + When CONFIG_TIMESTAMP is selected, the timestamp + (date and time) of an image is printed by image + commands like bootm or iminfo. This option is + automatically enabled when you select CFG_CMD_DATE . - Partition Support: CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION @@ -720,14 +720,14 @@ The following options need to be configured: standard LiLo mode numbers. Following modes are supported (* is default): - 800x600 1024x768 1280x1024 - 256 (8bit) 303* 305 307 - 65536 (16bit) 314 317 31a - 16,7 Mill (24bit) 315 318 31b + 800x600 1024x768 1280x1024 + 256 (8bit) 303* 305 307 + 65536 (16bit) 314 317 31a + 16,7 Mill (24bit) 315 318 31b (i.e. setenv videomode 317; saveenv; reset;) CONFIG_VIDEO_SED13806 - Enable Epson SED13806 driver. This driver supports 8bpp + Enable Epson SED13806 driver. This driver supports 8bpp and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP or CONFIG_VIDEO_SED13806_16BPP @@ -839,8 +839,8 @@ The following options need to be configured: either CONFIG_HARD_I2C or CONFIG_SOFT_I2C must be defined to include the appropriate I2C driver. - See also: common/cmd_i2c.c for a description of the - command line interface. + See also: common/cmd_i2c.c for a description of the + command line interface. CONFIG_HARD_I2C @@ -855,14 +855,14 @@ The following options need to be configured: I2C_INIT - (Optional). Any commands necessary to enable I2C - controller or configure ports. + (Optional). Any commands necessary to enable I2C + controller or configure ports. I2C_PORT - (Only for MPC8260 CPU). The I/O port to use (the code - assumes both bits are on the same port). Valid values - are 0..3 for ports A..D. + (Only for MPC8260 CPU). The I/O port to use (the code + assumes both bits are on the same port). Valid values + are 0..3 for ports A..D. I2C_ACTIVE @@ -910,40 +910,40 @@ The following options need to be configured: CONFIG_SOFT_SPI - Enables a software (bit-bang) SPI driver rather than - using hardware support. This is a general purpose - driver that only requires three general I/O port pins - (two outputs, one input) to function. If this is - defined, the board configuration must define several - SPI configuration items (port pins to use, etc). For - an example, see include/configs/sacsng.h. + Enables a software (bit-bang) SPI driver rather than + using hardware support. This is a general purpose + driver that only requires three general I/O port pins + (two outputs, one input) to function. If this is + defined, the board configuration must define several + SPI configuration items (port pins to use, etc). For + an example, see include/configs/sacsng.h. - FPGA Support: CONFIG_FPGA_COUNT - Specify the number of FPGA devices to support. + Specify the number of FPGA devices to support. - CONFIG_FPGA + CONFIG_FPGA - Used to specify the types of FPGA devices. For + Used to specify the types of FPGA devices. For example, #define CONFIG_FPGA CFG_XILINX_VIRTEX2 CFG_FPGA_PROG_FEEDBACK - Enable printing of hash marks during FPGA + Enable printing of hash marks during FPGA configuration. CFG_FPGA_CHECK_BUSY - Enable checks on FPGA configuration interface busy - status by the configuration function. This option - will require a board or device specific function to - be written. + Enable checks on FPGA configuration interface busy + status by the configuration function. This option + will require a board or device specific function to + be written. CONFIG_FPGA_DELAY - If defined, a function that provides delays in the - FPGA configuration driver. + If defined, a function that provides delays in the + FPGA configuration driver. CFG_FPGA_CHECK_CTRLC @@ -951,25 +951,25 @@ The following options need to be configured: CFG_FPGA_CHECK_ERROR - Check for configuration errors during FPGA bitfile - loading. For example, abort during Virtex II - configuration if the INIT_B line goes low (which - indicated a CRC error). + Check for configuration errors during FPGA bitfile + loading. For example, abort during Virtex II + configuration if the INIT_B line goes low (which + indicated a CRC error). CFG_FPGA_WAIT_INIT - Maximum time to wait for the INIT_B line to deassert - after PROB_B has been deasserted during a Virtex II - FPGA configuration sequence. The default time is 500 mS. + Maximum time to wait for the INIT_B line to deassert + after PROB_B has been deasserted during a Virtex II + FPGA configuration sequence. The default time is 500 mS. CFG_FPGA_WAIT_BUSY - Maximum time to wait for BUSY to deassert during - Virtex II FPGA configuration. The default is 5 mS. + Maximum time to wait for BUSY to deassert during + Virtex II FPGA configuration. The default is 5 mS. CFG_FPGA_WAIT_CONFIG - Time to wait after FPGA configuration. The default is + Time to wait after FPGA configuration. The default is 200 mS. - FPGA Support: CONFIG_FPGA_COUNT @@ -987,10 +987,10 @@ The following options need to be configured: CFG_FPGA_CHECK_BUSY - Enable checks on FPGA configuration interface busy - status by the configuration function. This option - will require a board or device specific function to - be written. + Enable checks on FPGA configuration interface busy + status by the configuration function. This option + will require a board or device specific function to + be written. CONFIG_FPGA_DELAY @@ -1002,44 +1002,44 @@ The following options need to be configured: CFG_FPGA_CHECK_ERROR - Check for configuration errors during FPGA bitfile - loading. For example, abort during Virtex II - configuration if the INIT_B line goes low (which - indicated a CRC error). + Check for configuration errors during FPGA bitfile + loading. For example, abort during Virtex II + configuration if the INIT_B line goes low (which + indicated a CRC error). CFG_FPGA_WAIT_INIT - Maximum time to wait for the INIT_B line to deassert - after PROB_B has been deasserted during a Virtex II - FPGA configuration sequence. The default time is 500 - mS. + Maximum time to wait for the INIT_B line to deassert + after PROB_B has been deasserted during a Virtex II + FPGA configuration sequence. The default time is 500 + mS. CFG_FPGA_WAIT_BUSY - Maximum time to wait for BUSY to deassert during - Virtex II FPGA configuration. The default is 5 mS. + Maximum time to wait for BUSY to deassert during + Virtex II FPGA configuration. The default is 5 mS. CFG_FPGA_WAIT_CONFIG - Time to wait after FPGA configuration. The default is - 200 mS. + Time to wait after FPGA configuration. The default is + 200 mS. - Configuration Management: CONFIG_IDENT_STRING - If defined, this string will be added to the U-Boot - version information (U_BOOT_VERSION) + If defined, this string will be added to the U-Boot + version information (U_BOOT_VERSION) - Vendor Parameter Protection: - U-Boot considers the values of the environment - variables "serial#" (Board Serial Number) and - "ethaddr" (Ethernet Address) to bb parameters that - are set once by the board vendor / manufacturer, and - protects these variables from casual modification by - the user. Once set, these variables are read-only, - and write or delete attempts are rejected. You can - change this behviour: + U-Boot considers the values of the environment + variables "serial#" (Board Serial Number) and + "ethaddr" (Ethernet Address) to bb parameters that + are set once by the board vendor / manufacturer, and + protects these variables from casual modification by + the user. Once set, these variables are read-only, + and write or delete attempts are rejected. You can + change this behviour: If CONFIG_ENV_OVERWRITE is #defined in your config file, the write protection for vendor parameters is @@ -1099,10 +1099,10 @@ The following options need to be configured: CONFIG_NET_RETRY_COUNT - This variable defines the number of retries for - network operations like ARP, RARP, TFTP, or BOOTP - before giving up the operation. If not defined, a - default value of 5 is used. + This variable defines the number of retries for + network operations like ARP, RARP, TFTP, or BOOTP + before giving up the operation. If not defined, a + default value of 5 is used. - Command Interpreter: CFG_HUSH_PARSER @@ -1125,18 +1125,18 @@ The following options need to be configured: Note: - In the current implementation, the local variables - space and global environment variables space are - separated. Local variables are those you define by - simply typing like `name=value'. To access a local - variable later on, you have write `$name' or - `${name}'; variable directly by typing say `$name' at - the command prompt. + In the current implementation, the local variables + space and global environment variables space are + separated. Local variables are those you define by + simply typing like `name=value'. To access a local + variable later on, you have write `$name' or + `${name}'; variable directly by typing say `$name' at + the command prompt. - Global environment variables are those you use - setenv/printenv to work with. To run a command stored - in such a variable, you need to use the run command, - and you must not use the '$' sign to access them. + Global environment variables are those you use + setenv/printenv to work with. To run a command stored + in such a variable, you need to use the run command, + and you must not use the '$' sign to access them. To store commands and special characters in a variable, please use double quotation marks @@ -1147,38 +1147,38 @@ The following options need to be configured: - Default Environment CONFIG_EXTRA_ENV_SETTINGS - Define this to contain any number of null terminated - strings (variable = value pairs) that will be part of - the default enviroment compiled into the boot image. + Define this to contain any number of null terminated + strings (variable = value pairs) that will be part of + the default enviroment compiled into the boot image. - For example, place something like this in your - board's config file: + For example, place something like this in your + board's config file: #define CONFIG_EXTRA_ENV_SETTINGS \ "myvar1=value1\0" \ "myvar2=value2\0" - Warning: This method is based on knowledge about the - internal format how the environment is stored by the - U-Boot code. This is NOT an official, exported - interface! Although it is unlikely that this format - will change soon, but there is no guarantee either. + Warning: This method is based on knowledge about the + internal format how the environment is stored by the + U-Boot code. This is NOT an official, exported + interface! Although it is unlikely that this format + will change soon, but there is no guarantee either. You better know what you are doing here. - Note: overly (ab)use of the default environment is - discouraged. Make sure to check other ways to preset - the environment like the autoscript function or the - boot command first. + Note: overly (ab)use of the default environment is + discouraged. Make sure to check other ways to preset + the environment like the autoscript function or the + boot command first. - Show boot progress CONFIG_SHOW_BOOT_PROGRESS - Defining this option allows to add some board- - specific code (calling a user-provided function - "show_boot_progress(int)") that enables you to show - the system's boot progress on some display (for - example, some LED's) on your board. At the moment, - the following checkpoints are implemented: + Defining this option allows to add some board- + specific code (calling a user-provided function + "show_boot_progress(int)") that enables you to show + the system's boot progress on some display (for + example, some LED's) on your board. At the moment, + the following checkpoints are implemented: Arg Where When 1 common/cmd_bootm.c before attempting to boot an image @@ -1241,23 +1241,23 @@ Modem Support: - Modem debug support: CONFIG_MODEM_SUPPORT_DEBUG - Enables debugging stuff (char screen[1024], dbg()) - for modem support. Useful only with BDI2000. + Enables debugging stuff (char screen[1024], dbg()) + for modem support. Useful only with BDI2000. - General: - In the target system modem support is enabled when a - specific key (key combination) is pressed during - power-on. Otherwise U-Boot will boot normally - (autoboot). The key_pressed() fuction is called from - board_init(). Currently key_pressed() is a dummy - function, returning 1 and thus enabling modem - initialization. + In the target system modem support is enabled when a + specific key (key combination) is pressed during + power-on. Otherwise U-Boot will boot normally + (autoboot). The key_pressed() fuction is called from + board_init(). Currently key_pressed() is a dummy + function, returning 1 and thus enabling modem + initialization. - If there are no modem init strings in the - environment, U-Boot proceed to autoboot; the - previous output (banner, info printfs) will be - supressed, though. + If there are no modem init strings in the + environment, U-Boot proceed to autoboot; the + previous output (banner, info printfs) will be + supressed, though. See also: doc/README.Modem @@ -1368,8 +1368,8 @@ Configuration Settings: downloaded image) this option may be very useful. - CFG_FLASH_CFI: - Define if the flash driver uses extra elements in the - common flash structure for storing flash geometry + Define if the flash driver uses extra elements in the + common flash structure for storing flash geometry The following definitions that deal with the placement and management of environment data (variable area); in general, we support the @@ -1435,10 +1435,10 @@ following configurations: - CFG_ENV_ADDR_REDUND CFG_ENV_SIZE_REDUND - These settings describe a second storage area used to hold - a redundand copy of the environment data, so that there is - a valid backup copy in case there is a power failur during - a "saveenv" operation. + These settings describe a second storage area used to hold + a redundand copy of the environment data, so that there is + a valid backup copy in case there is a power failur during + a "saveenv" operation. BE CAREFUL! Any changes to the flash layout, and some changes to the source code will make it necessary to adapt <board>/u-boot.lds* @@ -1501,25 +1501,6 @@ to save the current settings. - CFG_EEPROM_SIZE: The size in bytes of the EEPROM device. - - CFG_I2C_EEPROM_ADDR: - If defined, specified the chip address of the EEPROM device. - The default address is zero. - - - CFG_EEPROM_PAGE_WRITE_BITS: - If defined, the number of bits used to address bytes in a - single page in the EEPROM device. A 64 byte page, for example - would require six bits. - - - CFG_EEPROM_PAGE_WRITE_DELAY_MS: - If defined, the number of milliseconds to delay between - page writes. The default is zero milliseconds. - - - CFG_I2C_EEPROM_ADDR_LEN: - The length in bytes of the EEPROM memory array address. Note - that this is NOT the chip address length! - - - CFG_EEPROM_SIZE: - The size in bytes of the EEPROM device. - CFG_SPI_INIT_OFFSET @@ -1575,19 +1556,19 @@ Low Level (hardware related) configuration options: CFG_ISA_IO_OFFSET - defines the offset of register from address. It - depends on which part of the data bus is connected to - the fdc chipset. (default value 0) + defines the offset of register from address. It + depends on which part of the data bus is connected to + the fdc chipset. (default value 0) - If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and - CFG_FDC_DRIVE_NUMBER are undefined, they take their - default value. + If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and + CFG_FDC_DRIVE_NUMBER are undefined, they take their + default value. - if CFG_FDC_HW_INIT is defined, then the function - fdc_hw_init() is called at the beginning of the FDC - setup. fdc_hw_init() must be provided by the board - source code. It is used to make hardware dependant - initializations. + if CFG_FDC_HW_INIT is defined, then the function + fdc_hw_init() is called at the beginning of the FDC + setup. fdc_hw_init() must be provided by the board + source code. It is used to make hardware dependant + initializations. - CFG_IMMR: Physical address of the Internal Memory Mapped Register; DO NOT CHANGE! (11-4) @@ -1676,10 +1657,10 @@ Low Level (hardware related) configuration options: doc/README.MBX before setting this variable! - CFG_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) - Offset of the bootmode word in DPRAM used by post - (Power On Self Tests). This definition overrides - #define'd default value in commproc.h resp. - cpm_8260.h. + Offset of the bootmode word in DPRAM used by post + (Power On Self Tests). This definition overrides + #define'd default value in commproc.h resp. + cpm_8260.h. Building the Software: ====================== @@ -2536,6 +2517,44 @@ models provide on-chip memory (like the IMMR area on MPC8xx and MPC826x processors), on others (parts of) the data cache can be locked as (mis-) used as memory, etc. + Chris Hallinan posted a good summy of these issues to the + u-boot-users mailing list: + + Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? + From: "Chris Hallinan" <clh@net1plus.com> + Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) + ... + + Correct me if I'm wrong, folks, but the way I understand it + is this: Using DCACHE as initial RAM for Stack, etc, does not + require any physical RAM backing up the cache. The cleverness + is that the cache is being used as a temporary supply of + necessary storage before the SDRAM controller is setup. It's + beyond the scope of this list to expain the details, but you + can see how this works by studying the cache architecture and + operation in the architecture and processor-specific manuals. + + OCM is On Chip Memory, which I believe the 405GP has 4K. It + is another option for the system designer to use as an + initial stack/ram area prior to SDRAM being available. Either + option should work for you. Using CS 4 should be fine if your + board designers haven't used it for something that would + cause you grief during the initial boot! It is frequently not + used. + + CFG_INIT_RAM_ADDR should be somewhere that won't interfere + with your processor/board/system design. The default value + you will find in any recent u-boot distribution in + Walnut405.h should work for you. I'd set it to a value larger + than your SDRAM module. If you have a 64MB SDRAM module, set + it above 400_0000. Just make sure your board has no resources + that are supposed to respond to that address! That code in + start.S has been around a while and should work as is when + you get the config right. + + -Chris Hallinan + DS4.COM, Inc. + It is essential to remember this, since it has some impact on the C code for the initialization procedures: |