diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2015-02-20 08:04:03 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2015-02-21 13:23:51 (GMT) |
commit | 620118403e1521b4c883848a84d2fb68e3fa1aa0 (patch) | |
tree | 880f15ded4ea034088c4155d56a4846e8edc54f0 /arch/arm/cpu/arm920t/at91/clock.c | |
parent | 01f14456306c84f9bcd3945a10c98ae50e30542a (diff) | |
download | u-boot-620118403e1521b4c883848a84d2fb68e3fa1aa0.tar.xz |
ARM: at91: collect SoC sources into mach-at91
This commit moves source files as follows:
arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/*
arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/*
arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/*
arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/*
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
Diffstat (limited to 'arch/arm/cpu/arm920t/at91/clock.c')
-rw-r--r-- | arch/arm/cpu/arm920t/at91/clock.c | 157 |
1 files changed, 0 insertions, 157 deletions
diff --git a/arch/arm/cpu/arm920t/at91/clock.c b/arch/arm/cpu/arm920t/at91/clock.c deleted file mode 100644 index 2813bf7..0000000 --- a/arch/arm/cpu/arm920t/at91/clock.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] - * - * Copyright (C) 2011 Andreas Bießmann - * Copyright (C) 2005 David Brownell - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> - -#if !defined(CONFIG_AT91FAMILY) -# error You need to define CONFIG_AT91FAMILY in your board config! -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static unsigned long at91_css_to_rate(unsigned long css) -{ - switch (css) { - case AT91_PMC_MCKR_CSS_SLOW: - return CONFIG_SYS_AT91_SLOW_CLOCK; - case AT91_PMC_MCKR_CSS_MAIN: - return gd->arch.main_clk_rate_hz; - case AT91_PMC_MCKR_CSS_PLLA: - return gd->arch.plla_rate_hz; - case AT91_PMC_MCKR_CSS_PLLB: - return gd->arch.pllb_rate_hz; - } - - return 0; -} - -#ifdef CONFIG_USB_ATMEL -static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq) -{ - unsigned i, div = 0, mul = 0, diff = 1 << 30; - unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; - - /* PLL output max 240 MHz (or 180 MHz per errata) */ - if (out_freq > 240000000) - goto fail; - - for (i = 1; i < 256; i++) { - int diff1; - unsigned input, mul1; - - /* - * PLL input between 1MHz and 32MHz per spec, but lower - * frequences seem necessary in some cases so allow 100K. - * Warning: some newer products need 2MHz min. - */ - input = main_freq / i; - if (input < 100000) - continue; - if (input > 32000000) - continue; - - mul1 = out_freq / input; - if (mul1 > 2048) - continue; - if (mul1 < 2) - goto fail; - - diff1 = out_freq - input * mul1; - if (diff1 < 0) - diff1 = -diff1; - if (diff > diff1) { - diff = diff1; - div = i; - mul = mul1; - if (diff == 0) - break; - } - } - if (i == 256 && diff > (out_freq >> 5)) - goto fail; - return ret | ((mul - 1) << 16) | div; -fail: - return 0; -} -#endif - -static u32 at91_pll_rate(u32 freq, u32 reg) -{ - unsigned mul, div; - - div = reg & 0xff; - mul = (reg >> 16) & 0x7ff; - if (div && mul) { - freq /= div; - freq *= mul + 1; - } else - freq = 0; - - return freq; -} - -int at91_clock_init(unsigned long main_clock) -{ - unsigned freq, mckr; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK - unsigned tmp; - /* - * When the bootloader initialized the main oscillator correctly, - * there's no problem using the cycle counter. But if it didn't, - * or when using oscillator bypass mode, we must be told the speed - * of the main clock. - */ - if (!main_clock) { - do { - tmp = readl(&pmc->mcfr); - } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); - tmp &= AT91_PMC_MCFR_MAINF_MASK; - main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); - } -#endif - gd->arch.main_clk_rate_hz = main_clock; - - /* report if PLLA is more than mildly overclocked */ - gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); - -#ifdef CONFIG_USB_ATMEL - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | - AT91_PMC_PLLBR_USBDIV_2; - gd->arch.pllb_rate_hz = at91_pll_rate(main_clock, - gd->arch.at91_pllb_usb_init); -#endif - - /* - * MCK and CPU derive from one of those primary clocks. - * For now, assume this parentage won't change. - */ - mckr = readl(&pmc->mckr); - gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); - freq = gd->arch.mck_rate_hz; - - freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */ - /* mdiv */ - gd->arch.mck_rate_hz = freq / - (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); - gd->arch.cpu_clk_rate_hz = freq; - - return 0; -} |