diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2015-02-05 05:42:58 (GMT) |
---|---|---|
committer | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2015-02-06 15:15:03 (GMT) |
commit | 6c45ef4b948abd92f299d4ca1ab99c9cdea6bf8e (patch) | |
tree | 40d96a70a993698b591926ad92102bfcef076579 /arch/arm/cpu | |
parent | dc4057eb8195e1b89f744ac50a1afd1a03c99395 (diff) | |
download | u-boot-6c45ef4b948abd92f299d4ca1ab99c9cdea6bf8e.tar.xz |
ARM: UniPhier: do not compile unnecessary objects
It is true that unused functions are removed from the ELF image
by the compiler's garbage collection but relying on it too much
does not look nice.
Currently, the build is taking more than it should.
Refactor the makefiles to compile only files that are really needed.
CONFIG_SOC_INIT and CONFIG_DRAM_INIT are no longer needed by the
optimization.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r-- | arch/arm/cpu/armv7/uniphier/Kconfig | 11 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/uniphier/Makefile | 24 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 13 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 12 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 13 |
5 files changed, 41 insertions, 32 deletions
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 0556e4b..5c5a84f 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -50,21 +50,12 @@ endchoice config CMD_PINMON bool "Enable boot mode pins monitor command" - depends on !SPL_BUILD default y help The command "pinmon" shows the state of the boot mode pins. The boot mode pins are latched when the system reset is deasserted and determine which device the system should load a boot image from. -config SOC_INIT - bool - default SPL_BUILD - -config DRAM_INIT - bool - default SPL_BUILD - config CMD_DDRPHY_DUMP bool "Enable dump command of DDR PHY parameters" depends on !SPL_BUILD @@ -74,7 +65,7 @@ config CMD_DDRPHY_DUMP choice prompt "DDR3 Frequency select" - depends on DRAM_INIT + depends on SPL_BUILD config DDR_FREQ_1600 bool "DDR3 1600" diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile index 713a0d7..df418dd 100644 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -2,24 +2,32 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_SPL_BUILD) += lowlevel_init.o init_page_table.o -obj-$(CONFIG_SPL_BUILD) += spl.o +ifdef CONFIG_SPL_BUILD + +obj-y += lowlevel_init.o +obj-y += init_page_table.o +obj-y += spl.o +obj-y += ddrphy_training.o + +else -obj-y += timer.o -obj-y += reset.o -obj-y += cache_uniphier.o -obj-y += dram_init.o -obj-$(CONFIG_DRAM_INIT) += ddrphy_training.o obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o obj-$(CONFIG_MISC_INIT_F) += print_misc_info.o +obj-y += dram_init.o +obj-y += board_common.o obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o +obj-y += reset.o +obj-y += cache_uniphier.o obj-$(CONFIG_UNIPHIER_SMP) += smp.o obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o -obj-y += board_common.o +endif + +obj-y += timer.o + obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index bef1b8a..72f4663 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -2,10 +2,13 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -obj-y += boot-mode.o +ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ - clkrst_init.o +obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ + pll_spectrum.o umc_init.o ddrphy_init.o +else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 484e978..e330fda 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -2,9 +2,13 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -obj-y += boot-mode.o +ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o +obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \ + pll_spectrum.o umc_init.o ddrphy_init.o +else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index bef1b8a..72f4663 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -2,10 +2,13 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -obj-y += boot-mode.o +ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ - clkrst_init.o +obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ + pll_spectrum.o umc_init.o ddrphy_init.o +else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o +endif + +obj-y += boot-mode.o |