diff options
author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-12-10 13:31:56 (GMT) |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-12-10 21:23:59 (GMT) |
commit | f15ea6e1d67782a1626d4a4922b6c20e380085e5 (patch) | |
tree | 57d78f1ee94a2060eaa591533278d2934d4f1da3 /arch/arm/cpu | |
parent | cb7ee1b98cac6baf244daefb1192adf5a47bc983 (diff) | |
parent | f44483b57c49282299da0e5c10073b909cdad979 (diff) | |
download | u-boot-f15ea6e1d67782a1626d4a4922b6c20e380085e5.tar.xz |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
arch/arm/cpu/armv7/rmobile/Makefile
doc/README.scrapyard
Needed manual fix:
arch/arm/cpu/armv7/omap-common/Makefile
board/compulab/cm_t335/u-boot.lds
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/elm.c | 196 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/mem.c | 52 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap-common/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap-common/clocks-common.c | 3 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 5 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap3/board.c | 2 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap3/clock.c | 2 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/rmobile/Makefile | 8 |
9 files changed, 40 insertions, 231 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 966fcab..5566310 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -19,4 +19,3 @@ obj-y += ddr.o obj-y += emif4.o obj-y += board.o obj-y += mux.o -obj-$(CONFIG_NAND_OMAP_GPMC) += elm.o diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c deleted file mode 100644 index 8f1d6af..0000000 --- a/arch/arm/cpu/armv7/am33xx/elm.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> - * Mansoor Ahamed <mansoor.ahamed@ti.com> - * - * BCH Error Location Module (ELM) support. - * - * NOTE: - * 1. Supports only continuous mode. Dont see need for page mode in uboot - * 2. Supports only syndrome polynomial 0. i.e. poly local variable is - * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial - * sets in uboot - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/cpu.h> -#include <asm/omap_gpmc.h> -#include <asm/arch/elm.h> - -#define ELM_DEFAULT_POLY (0) - -struct elm *elm_cfg; - -/** - * elm_load_syndromes - Load BCH syndromes based on nibble selection - * @syndrome: BCH syndrome - * @nibbles: - * @poly: Syndrome Polynomial set to use - * - * Load BCH syndromes based on nibble selection - */ -static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly) -{ - u32 *ptr; - u32 val; - - /* reg 0 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0]; - val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) | - (syndrome[3] << 24); - writel(val, ptr); - /* reg 1 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1]; - val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) | - (syndrome[7] << 24); - writel(val, ptr); - - /* BCH 8-bit with 26 nibbles (4*8=32) */ - if (nibbles > 13) { - /* reg 2 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2]; - val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) | - (syndrome[11] << 24); - writel(val, ptr); - /* reg 3 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3]; - val = syndrome[12] | (syndrome[13] << 8) | - (syndrome[14] << 16) | (syndrome[15] << 24); - writel(val, ptr); - } - - /* BCH 16-bit with 52 nibbles (7*8=56) */ - if (nibbles > 26) { - /* reg 4 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4]; - val = syndrome[16] | (syndrome[17] << 8) | - (syndrome[18] << 16) | (syndrome[19] << 24); - writel(val, ptr); - - /* reg 5 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5]; - val = syndrome[20] | (syndrome[21] << 8) | - (syndrome[22] << 16) | (syndrome[23] << 24); - writel(val, ptr); - - /* reg 6 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]; - val = syndrome[24] | (syndrome[25] << 8) | - (syndrome[26] << 16) | (syndrome[27] << 24); - writel(val, ptr); - } -} - -/** - * elm_check_errors - Check for BCH errors and return error locations - * @syndrome: BCH syndrome - * @nibbles: - * @error_count: Returns number of errrors in the syndrome - * @error_locations: Returns error locations (in decimal) in this array - * - * Check the provided syndrome for BCH errors and return error count - * and locations in the array passed. Returns -1 if error is not correctable, - * else returns 0 - */ -int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, - u32 *error_locations) -{ - u8 poly = ELM_DEFAULT_POLY; - s8 i; - u32 location_status; - - elm_load_syndromes(syndrome, nibbles, poly); - - /* start processing */ - writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]) - | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID), - &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]); - - /* wait for processing to complete */ - while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1) - ; - /* clear status */ - writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)), - &elm_cfg->irqstatus); - - /* check if correctable */ - location_status = readl(&elm_cfg->error_location[poly].location_status); - if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) - return -1; - - /* get error count */ - *error_count = readl(&elm_cfg->error_location[poly].location_status) & - ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK; - - for (i = 0; i < *error_count; i++) { - error_locations[i] = - readl(&elm_cfg->error_location[poly].error_location_x[i]); - } - - return 0; -} - - -/** - * elm_config - Configure ELM module - * @level: 4 / 8 / 16 bit BCH - * - * Configure ELM module based on BCH level. - * Set mode as continuous mode. - * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used. - * Also, the mode is set only for syndrome 0 - */ -int elm_config(enum bch_level level) -{ - u32 val; - u8 poly = ELM_DEFAULT_POLY; - u32 buffer_size = 0x7FF; - - /* config size and level */ - val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK; - val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) & - ELM_LOCATION_CONFIG_ECC_SIZE_MASK); - writel(val, &elm_cfg->location_config); - - /* config continous mode */ - /* enable interrupt generation for syndrome polynomial set */ - writel((readl(&elm_cfg->irqenable) | (0x1 << poly)), - &elm_cfg->irqenable); - /* set continuous mode for the syndrome polynomial set */ - writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)), - &elm_cfg->page_ctrl); - - return 0; -} - -/** - * elm_reset - Do a soft reset of ELM - * - * Perform a soft reset of ELM and return after reset is done. - */ -void elm_reset(void) -{ - /* initiate reset */ - writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET), - &elm_cfg->sysconfig); - - /* wait for reset complete and normal operation */ - while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) != - ELM_SYSSTATUS_RESETDONE) - ; -} - -/** - * elm_init - Initialize ELM module - * - * Initialize ELM support. Currently it does only base address init - * and ELM reset. - */ -void elm_init(void) -{ - elm_cfg = (struct elm *)ELM_BASE; - elm_reset(); -} diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c index b6eb466..56c9e7d 100644 --- a/arch/arm/cpu/armv7/am33xx/mem.c +++ b/arch/arm/cpu/armv7/am33xx/mem.c @@ -22,17 +22,6 @@ struct gpmc *gpmc_cfg; -#if defined(CONFIG_CMD_NAND) -static const u32 gpmc_m_nand[GPMC_MAX_REG] = { - M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, 0 -}; -#endif - void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size) @@ -61,11 +50,34 @@ void gpmc_init(void) { /* putting a blanket check on GPMC based on ZeBu for now */ gpmc_cfg = (struct gpmc *)GPMC_BASE; - -#ifdef CONFIG_CMD_NAND - const u32 *gpmc_config = NULL; - u32 base = 0; +#if defined(CONFIG_NOR) +/* configure GPMC for NOR */ + const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, + STNOR_GPMC_CONFIG2, + STNOR_GPMC_CONFIG3, + STNOR_GPMC_CONFIG4, + STNOR_GPMC_CONFIG5, + STNOR_GPMC_CONFIG6, + STNOR_GPMC_CONFIG7 + }; + u32 size = GPMC_SIZE_16M; + u32 base = CONFIG_SYS_FLASH_BASE; +#elif defined(CONFIG_NAND) +/* configure GPMC for NAND */ + const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, + 0 + }; + u32 size = GPMC_SIZE_256M; + u32 base = CONFIG_SYS_NAND_BASE; +#else + const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 }; u32 size = 0; + u32 base = 0; #endif /* global settings */ writel(0x00000008, &gpmc_cfg->sysconfig); @@ -81,12 +93,6 @@ void gpmc_init(void) */ writel(0, &gpmc_cfg->cs[0].config7); sdelay(1000); - -#ifdef CONFIG_CMD_NAND - gpmc_config = gpmc_m_nand; - - base = PISMO1_NAND_BASE; - size = PISMO1_NAND_SIZE; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#endif + /* enable chip-select specific configurations */ + enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size); } diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 679c1a1..59f5352 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -18,7 +18,7 @@ obj-y += abb.o endif ifneq ($(CONFIG_OMAP54XX),) -COBJS += pipe3-phy.o +obj-y += pipe3-phy.o obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o endif diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index bb77b5c..dfa3760 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -779,7 +779,8 @@ void gpi2c_init(void) static int gpi2c = 1; if (gpi2c) { - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, + CONFIG_SYS_OMAP24_I2C_SLAVE); gpi2c = 0; } } diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index 5e93b34..02aa129 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -33,6 +33,11 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*_i2c_*))); + } >.sram + + . = ALIGN(4); __image_copy_end = .; _end = .; diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 7d1f8d9..2922816 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -98,7 +98,7 @@ void spl_board_init(void) gpmc_init(); #endif #ifdef CONFIG_SPL_I2C_SUPPORT - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); #endif } #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index ae9c4c3..1bc27bd 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -708,7 +708,7 @@ void per_clocks_enable(void) sr32(&prcm_base->iclken_per, 17, 1, 1); #endif -#ifdef CONFIG_DRIVER_OMAP34XX_I2C +#ifdef CONFIG_SYS_I2C_OMAP34XX /* Turn on all 3 I2C clocks */ sr32(&prcm_base->fclken1_core, 15, 3, 0x7); sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */ diff --git a/arch/arm/cpu/armv7/rmobile/Makefile b/arch/arm/cpu/armv7/rmobile/Makefile index 7b9d47e..2221999 100644 --- a/arch/arm/cpu/armv7/rmobile/Makefile +++ b/arch/arm/cpu/armv7/rmobile/Makefile @@ -14,10 +14,4 @@ obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-r8a7790.o pfc-r8a7790.o obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-r8a7791.o pfc-r8a7791.o obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o -obj-$(CONFIG_TMU_TIMER) += sh_timer.o - -SRCS += $(obj)sh_timer.c -# from arch/sh/lib/ directory -$(obj)sh_timer.c: - @rm -f $(obj)sh_timer.c - ln -s $(SRCTREE)/arch/sh/lib/time.c $(obj)sh_timer.c +obj-$(CONFIG_TMU_TIMER) += ../../../../sh/lib/time.o |