ARM: dts: k2*: Rename the k2* files to keystone-k2* files

As reported in [1], rename the k2* dts files to keystone-* files
this will force consistency throughout.

Script for the same (and hand modified for Makefile and config
files):
for i in arch/arm/dts/k2*
do
	b=`basename $i`;
	git mv $i arch/arm/dts/keystone-$b;
	sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si]
done

This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename
the k2* files to keystone-k2* files")

[1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 132 deletions

diff --git a/arch/arm/dts/k2l-evm.dts b/arch/arm/dts/k2l-evm.dts
deleted file mode 100644
index da0661b..0000000
--- a/arch/arm/dts/k2l-evm.dts
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "k2l.dtsi"
-
-/ {
-	compatible =  "ti,k2l-evm","ti,keystone";
-	model = "Texas Instruments Keystone 2 Lamarr EVM";
-
-	soc {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x7FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	status ="okay";
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11", "spi-flash";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	status = "ok";
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};