usb: tegra: combine header file

Combine the Tegra USB header file into one header file for all SoCs.
Use ifdef to account for the difference, especially Tegra20 is quite
different from newer SoCs. This avoids duplication, mainly for
Tegra30 and newer devices.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 225 insertions, 1 deletions

diff --git a/arch/arm/include/asm/arch-tegra/usb.h b/arch/arm/include/asm/arch-tegra/usb.h
index 35d14e9..ceb7bcd 100644
--- a/arch/arm/include/asm/arch-tegra/usb.h
+++ b/arch/arm/include/asm/arch-tegra/usb.h
@@ -8,6 +8,189 @@
 #ifndef _TEGRA_USB_H_
 #define _TEGRA_USB_H_
 
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+	/* 0x000 */
+	uint id;
+	uint reserved0;
+	uint host;
+	uint device;
+
+	/* 0x010 */
+	uint txbuf;
+	uint rxbuf;
+	uint reserved1[2];
+
+	/* 0x020 */
+	uint reserved2[56];
+
+	/* 0x100 */
+	u16 cap_length;
+	u16 hci_version;
+	uint hcs_params;
+	uint hcc_params;
+	uint reserved3[5];
+
+	/* 0x120 */
+	uint dci_version;
+	uint dcc_params;
+	uint reserved4[2];
+
+#ifdef CONFIG_TEGRA20
+	/* 0x130 */
+	uint reserved4_2[4];
+
+	/* 0x140 */
+	uint usb_cmd;
+	uint usb_sts;
+	uint usb_intr;
+	uint frindex;
+
+	/* 0x150 */
+	uint reserved5;
+	uint periodic_list_base;
+	uint async_list_addr;
+	uint async_tt_sts;
+
+	/* 0x160 */
+	uint burst_size;
+	uint tx_fill_tuning;
+	uint reserved6;   /* is this port_sc1 on some controllers? */
+	uint icusb_ctrl;
+
+	/* 0x170 */
+	uint ulpi_viewport;
+	uint reserved7;
+	uint endpt_nak;
+	uint endpt_nak_enable;
+
+	/* 0x180 */
+	uint reserved;
+	uint port_sc1;
+	uint reserved8[6];
+
+	/* 0x1a0 */
+	uint reserved9;
+	uint otgsc;
+	uint usb_mode;
+	uint endpt_setup_stat;
+
+	/* 0x1b0 */
+	uint reserved10[20];
+
+	/* 0x200 */
+	uint reserved11[0x80];
+#else
+	/* 0x130 */
+	uint usb_cmd;
+	uint usb_sts;
+	uint usb_intr;
+	uint frindex;
+
+	/* 0x140 */
+	uint reserved5;
+	uint periodic_list_base;
+	uint async_list_addr;
+	uint reserved5_1;
+
+	/* 0x150 */
+	uint burst_size;
+	uint tx_fill_tuning;
+	uint reserved6;
+	uint icusb_ctrl;
+
+	/* 0x160 */
+	uint ulpi_viewport;
+	uint reserved7[3];
+
+	/* 0x170 */
+	uint reserved;
+	uint port_sc1;
+	uint reserved8[6];
+
+	/* 0x190 */
+	uint reserved9[8];
+
+	/* 0x1b0 */
+	uint reserved10;
+	uint hostpc1_devlc;
+	uint reserved10_1[2];
+
+	/* 0x1c0 */
+	uint reserved10_2[4];
+
+	/* 0x1d0 */
+	uint reserved10_3[4];
+
+	/* 0x1e0 */
+	uint reserved10_4[4];
+
+	/* 0x1f0 */
+	uint reserved10_5;
+	uint otgsc;
+	uint usb_mode;
+	uint reserved10_6;
+
+	/* 0x200 */
+	uint endpt_nak;
+	uint endpt_nak_enable;
+	uint endpt_setup_stat;
+	uint reserved11_1[0x7D];
+#endif
+
+	/* 0x400 */
+	uint susp_ctrl;
+	uint phy_vbus_sensors;
+	uint phy_vbus_wakeup_id;
+	uint phy_alt_vbus_sys;
+
+#ifdef CONFIG_TEGRA20
+	/* 0x410 */
+	uint usb1_legacy_ctrl;
+	uint reserved12[4];
+
+	/* 0x424 */
+	uint ulpi_timing_ctrl_0;
+	uint ulpi_timing_ctrl_1;
+	uint reserved13[53];
+#else
+
+	/* 0x410 */
+	uint usb1_legacy_ctrl;
+	uint reserved12[3];
+
+	/* 0x420 */
+	uint reserved13[56];
+#endif
+
+	/* 0x500 */
+	uint reserved14[64 * 3];
+
+	/* 0x800 */
+	uint utmip_pll_cfg0;
+	uint utmip_pll_cfg1;
+	uint utmip_xcvr_cfg0;
+	uint utmip_bias_cfg0;
+
+	/* 0x810 */
+	uint utmip_hsrx_cfg0;
+	uint utmip_hsrx_cfg1;
+	uint utmip_fslsrx_cfg0;
+	uint utmip_fslsrx_cfg1;
+
+	/* 0x820 */
+	uint utmip_tx_cfg0;
+	uint utmip_misc_cfg0;
+	uint utmip_misc_cfg1;
+	uint utmip_debounce_cfg0;
+
+	/* 0x830 */
+	uint utmip_bat_chrg_cfg0;
+	uint utmip_spare_cfg0;
+	uint utmip_xcvr_cfg1;
+	uint utmip_bias_cfg1;
+};
+
 /* USB1_LEGACY_CTRL */
 #define USB1_NO_LEGACY_MODE		1
 
@@ -24,22 +207,46 @@
 #define USB_PHY_CLK_VALID			(1 << 7)
 #define USB_SUSP_CLR				(1 << 5)
 
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30)
 /* USB2_IF_USB_SUSP_CTRL_0 */
 #define ULPI_PHY_ENB				(1 << 13)
 
+/* USB2_IF_ULPI_TIMING_CTRL_0 */
+#define ULPI_OUTPUT_PINMUX_BYP			(1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP			(1 << 11)
+
+/* USB2_IF_ULPI_TIMING_CTRL_1 */
+#define ULPI_DATA_TRIMMER_LOAD			(1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x)		(((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD		(1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD			(1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x)			(((x) & 0x7) << 25)
+#endif
+
 /* USBx_UTMIP_MISC_CFG0 */
 #define UTMIP_SUSPEND_EXIT_ON_EDGE		(1 << 22)
 
 /* USBx_UTMIP_MISC_CFG1 */
+#define UTMIP_PHY_XTAL_CLOCKEN			(1 << 30)
+
+/*
+ * Tegra 3 and later: Moved to Clock and Reset register space, see
+ * CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
+ */
 #define UTMIP_PLLU_STABLE_COUNT_SHIFT		6
 #define UTMIP_PLLU_STABLE_COUNT_MASK		\
 				(0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
+/*
+ * Tegra 3 and later: Moved to Clock and Reset register space, see
+ * CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
+ */
 #define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT	18
 #define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK		\
 				(0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
-#define UTMIP_PHY_XTAL_CLOCKEN			(1 << 30)
 
 /* USBx_UTMIP_PLL_CFG1_0 */
+/* Tegra 3 and later: Moved to Clock and Reset register space */
 #define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT	27
 #define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK	\
 				(0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
@@ -91,6 +298,23 @@
 /* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
 #define IC_ENB1					(1 << 3)
 
+#ifdef CONFIG_TEGRA20
+/* PORTSC1, USB1 */
+#define PTS1_SHIFT				31
+#define PTS1_MASK				(1 << PTS1_SHIFT)
+#define STS1					(1 << 30)
+
+/* PORTSC, USB2, USB3 */
+#define PTS_SHIFT		30
+#define PTS_MASK		(3U << PTS_SHIFT)
+#define STS			(1 << 29)
+#else
+/* USB2D_HOSTPC1_DEVLC_0 */
+#define PTS_SHIFT				29
+#define PTS_MASK				(0x7U << PTS_SHIFT)
+#define STS						(1 << 28)
+#endif
+
 #define PTS_UTMI	0
 #define PTS_RESERVED	1
 #define PTS_ULPI	2