diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2015-03-22 15:07:30 (GMT) |
---|---|---|
committer | Masahiro Yamada <yamada.masahiro@socionext.com> | 2015-03-23 15:15:52 (GMT) |
commit | 4d13b1b708b8c31c0e22d7f31f05dde4b3961621 (patch) | |
tree | 7da83136a8380e84c7213b07c43b533178d0246d /arch/arm/mach-uniphier | |
parent | def3feb8cbfd44f2cfec73db4cf54760eaa97ed6 (diff) | |
download | u-boot-4d13b1b708b8c31c0e22d7f31f05dde4b3961621.tar.xz |
ARM: UniPhier: fix typos in comments
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'arch/arm/mach-uniphier')
-rw-r--r-- | arch/arm/mach-uniphier/lowlevel_init.S | 14 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/support_card.c | 11 |
2 files changed, 13 insertions, 12 deletions
diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S index 3a3ada8..4a23ea4 100644 --- a/arch/arm/mach-uniphier/lowlevel_init.S +++ b/arch/arm/mach-uniphier/lowlevel_init.S @@ -25,8 +25,8 @@ ENTRY(lowlevel_init) * First we need to turn on MMU and Dcache again to get back * data access to L2. */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) + orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache mcr p15, 0, r0, c1, c0, 0 #ifdef CONFIG_DEBUG_LL @@ -41,7 +41,7 @@ ENTRY(lowlevel_init) ldr r3, =init_page_table @ page table must be 16KB aligned /* Disable MMU and Dcache before switching Page Table */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache mcr p15, 0, r0, c1, c0, 0 @@ -55,7 +55,7 @@ ENTRY(lowlevel_init) * bit[7] EXCL (Exclusive cache bit) * bit[6] SMP * bit[3] Write full line of zeros mode - * bit[2] L1 Prefetch enable + * bit[2] L1 prefetch enable * bit[1] L2 prefetch enable * bit[0] FW (Cache and TLB maintenance broadcast) */ @@ -81,7 +81,7 @@ primary_cpu: ldr r0, =_start @ entry for the secondary CPU str r0, [r1] ldr r0, [r1] @ make sure str is complete before sev - sev @ kick the sedoncary CPU + sev @ kick the secondary CPU mrc p15, 4, r1, c15, c0, 0 @ Configuration Base Address Register bfc r1, #0, #13 @ clear bit 12-0 mov r0, #-1 @@ -118,7 +118,7 @@ ENTRY(enable_mmu) * TLBs was already invalidated in "../start.S" * So, we don't need to invalidate it here. */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable mcr p15, 0, r0, c1, c0, 0 @@ -155,7 +155,7 @@ ENTRY(setup_init_ram) ldr r1, = SSCOPPQSEF ldr r0, [r1] cmp r0, #0 @ check if the command is successfully set - bne 0b @ try again if an error occurres + bne 0b @ try again if an error occurs ldr r1, = SSCOLPQS 1: diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c index e7b4158..77cc794 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/support_card.c @@ -1,6 +1,7 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2012-2015 Panasonic Corporation + * Copyright (C) 2015 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -94,7 +95,7 @@ void support_card_init(void) /* * After power on, we need to keep the LAN controller in reset state * for a while. (200 usec) - * Fortunatelly, enough wait time is already inserted in pll_init() + * Fortunately, enough wait time is already inserted in pll_init() * function. So we do not have to wait here. */ support_card_reset_deassert(); @@ -213,11 +214,11 @@ static void detect_num_flash_banks(void) debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); } -#else /* ONFIG_SYS_NO_FLASH */ +#else /* CONFIG_SYS_NO_FLASH */ void detect_num_flash_banks(void) { }; -#endif /* ONFIG_SYS_NO_FLASH */ +#endif /* CONFIG_SYS_NO_FLASH */ void support_card_late_init(void) { |