diff options
author | Tom Rini <trini@konsulko.com> | 2015-03-02 03:05:54 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-03-02 03:05:54 (GMT) |
commit | 6fa361903cdb673ec325a56125391088da257e81 (patch) | |
tree | f098e32c64f58070f1d69955806b14dbda571ad6 /arch/arm | |
parent | 1da7ce4155d0839d9d56525379493bb0f80b5330 (diff) | |
parent | 306f527eff269e48a98c9d83016df6d6877dbb6a (diff) | |
download | u-boot-6fa361903cdb673ec325a56125391088da257e81.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-samsung
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/cpu/armv7/exynos/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/common_setup.h | 62 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/exynos5_setup.h | 3 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/lowlevel_init.c | 147 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/sec_boot.S | 128 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/soc.c | 35 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-exynos/cpu.h | 5 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-exynos/system.h | 88 | ||||
-rw-r--r-- | arch/arm/include/asm/armv7.h | 44 |
9 files changed, 479 insertions, 35 deletions
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index e207bd6..8542f89 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -7,6 +7,8 @@ obj-y += clock.o power.o soc.o system.o pinmux.o tzpc.o +obj-$(CONFIG_EXYNOS5420) += sec_boot.o + ifdef CONFIG_SPL_BUILD obj-$(CONFIG_EXYNOS5) += clock_init_exynos5.o obj-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o diff --git a/arch/arm/cpu/armv7/exynos/common_setup.h b/arch/arm/cpu/armv7/exynos/common_setup.h index e6318c0..5235abb 100644 --- a/arch/arm/cpu/armv7/exynos/common_setup.h +++ b/arch/arm/cpu/armv7/exynos/common_setup.h @@ -23,6 +23,8 @@ * MA 02111-1307 USA */ +#include <asm/arch/system.h> + #define DMC_OFFSET 0x10000 /* @@ -43,3 +45,63 @@ void system_clock_init(void); int do_lowlevel_init(void); void sdelay(unsigned long); + +enum l2_cache_params { + CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0), + CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0), + CACHE_DISABLE_CLEAN_EVICT = (1 << 3), + CACHE_DATA_RAM_SETUP = (1 << 5), + CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6), + CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6), + CACHE_ENABLE_HAZARD_DETECT = (1 << 7), + CACHE_TAG_RAM_SETUP = (1 << 9), + CACHE_ECC_AND_PARITY = (1 << 21), + CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27) +}; + + +#ifndef CONFIG_SYS_L2CACHE_OFF +/* + * Configure L2CTLR to get timings that keep us from hanging/crashing. + * + * Must be inline here since low_power_start() is called without a + * stack (!). + */ +static inline void configure_l2_ctlr(void) +{ + uint32_t val; + + mrc_l2_ctlr(val); + + val |= CACHE_TAG_RAM_SETUP | + CACHE_DATA_RAM_SETUP | + CACHE_TAG_RAM_LATENCY_2_CYCLES | + CACHE_DATA_RAM_LATENCY_2_CYCLES; + + if (proid_is_exynos5420() || proid_is_exynos5800()) { + val |= CACHE_ECC_AND_PARITY | + CACHE_TAG_RAM_LATENCY_3_CYCLES | + CACHE_DATA_RAM_LATENCY_3_CYCLES; + } + + mcr_l2_ctlr(val); +} + +/* + * Configure L2ACTLR. + * + * Must be inline here since low_power_start() is called without a + * stack (!). + */ +static inline void configure_l2_actlr(void) +{ + uint32_t val; + + if (proid_is_exynos5420() || proid_is_exynos5800()) { + mrc_l2_aux_ctlr(val); + val |= CACHE_ENABLE_FORCE_L2_LOGIC | + CACHE_DISABLE_CLEAN_EVICT; + mcr_l2_aux_ctlr(val); + } +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h index 2eea48a..9073f50 100644 --- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h +++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h @@ -700,6 +700,9 @@ #define CLK_DIV_CPERI1_VAL NOT_AVAILABLE #else + +#define CPU_CONFIG_STATUS_OFFSET 0x80 +#define CPU_RST_FLAG_VAL 0xFCBA0D10 #define PAD_RETENTION_DRAM_COREBLK_VAL 0x10000000 /* APLL_CON1 */ diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c index 83e1dcf..120aaf8 100644 --- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c +++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c @@ -31,7 +31,10 @@ #include <asm/arch/tzpc.h> #include <asm/arch/periph.h> #include <asm/arch/pinmux.h> +#include <asm/arch/system.h> +#include <asm/armv7.h> #include "common_setup.h" +#include "exynos5_setup.h" /* These are the things we can do during low-level init */ enum { @@ -42,6 +45,128 @@ enum { DO_POWER = 1 << 4, }; +#ifdef CONFIG_EXYNOS5420 +/* + * Power up secondary CPUs. + */ +static void secondary_cpu_start(void) +{ + v7_enable_smp(EXYNOS5420_INFORM_BASE); + svc32_mode_en(); + branch_bx(CONFIG_EXYNOS_RELOCATE_CODE_BASE); +} + +/* + * This is the entry point of hotplug-in and + * cluster switching. + */ +static void low_power_start(void) +{ + uint32_t val, reg_val; + + reg_val = readl(EXYNOS5420_SPARE_BASE); + if (reg_val != CPU_RST_FLAG_VAL) { + writel(0x0, CONFIG_LOWPOWER_FLAG); + branch_bx(0x0); + } + + reg_val = readl(CONFIG_PHY_IRAM_BASE + 0x4); + if (reg_val != (uint32_t)&low_power_start) { + /* Store jump address as low_power_start if not present */ + writel((uint32_t)&low_power_start, CONFIG_PHY_IRAM_BASE + 0x4); + dsb(); + sev(); + } + + /* Set the CPU to SVC32 mode */ + svc32_mode_en(); + +#ifndef CONFIG_SYS_L2CACHE_OFF + /* Read MIDR for Primary Part Number */ + mrc_midr(val); + val = (val >> 4); + val &= 0xf; + + if (val == 0xf) { + configure_l2_ctlr(); + configure_l2_actlr(); + v7_enable_l2_hazard_detect(); + } +#endif + + /* Invalidate L1 & TLB */ + val = 0x0; + mcr_tlb(val); + mcr_icache(val); + + /* Disable MMU stuff and caches */ + mrc_sctlr(val); + + val &= ~((0x2 << 12) | 0x7); + val |= ((0x1 << 12) | (0x8 << 8) | 0x2); + mcr_sctlr(val); + + /* CPU state is hotplug or reset */ + secondary_cpu_start(); + + /* Core should not enter into WFI here */ + wfi(); +} + +/* + * Pointer to this function is stored in iRam which is used + * for jump and power down of a specific core. + */ +static void power_down_core(void) +{ + uint32_t tmp, core_id, core_config; + + /* Get the unique core id */ + /* + * Multiprocessor Affinity Register + * [11:8] Cluster ID + * [1:0] CPU ID + */ + mrc_mpafr(core_id); + tmp = core_id & 0x3; + core_id = (core_id >> 6) & ~3; + core_id |= tmp; + core_id &= 0x3f; + + /* Set the status of the core to low */ + core_config = (core_id * CPU_CONFIG_STATUS_OFFSET); + core_config += EXYNOS5420_CPU_CONFIG_BASE; + writel(0x0, core_config); + + /* Core enter WFI */ + wfi(); +} + +/* + * Configurations for secondary cores are inapt at this stage. + * Reconfigure secondary cores. Shutdown and change the status + * of all cores except the primary core. + */ +static void secondary_cores_configure(void) +{ + /* Clear secondary boot iRAM base */ + writel(0x0, (CONFIG_EXYNOS_RELOCATE_CODE_BASE + 0x1C)); + + /* set lowpower flag and address */ + writel(CPU_RST_FLAG_VAL, CONFIG_LOWPOWER_FLAG); + writel((uint32_t)&low_power_start, CONFIG_LOWPOWER_ADDR); + writel(CPU_RST_FLAG_VAL, EXYNOS5420_SPARE_BASE); + /* Store jump address for power down */ + writel((uint32_t)&power_down_core, CONFIG_PHY_IRAM_BASE + 0x4); + + /* Need all core power down check */ + dsb(); + sev(); +} + +extern void relocate_wait_code(void); +#endif + int do_lowlevel_init(void) { uint32_t reset_status; @@ -49,6 +174,28 @@ int do_lowlevel_init(void) arch_cpu_init(); +#ifndef CONFIG_SYS_L2CACHE_OFF + /* + * Init L2 cache parameters here for use by boot and resume + * + * These are here instead of in v7_outer_cache_enable() so that the + * L2 cache settings get properly set even at resume time or if we're + * running U-Boot with the cache off. The kernel still needs us to + * set these for it. + */ + configure_l2_ctlr(); + configure_l2_actlr(); + dsb(); + isb(); +#endif + +#ifdef CONFIG_EXYNOS5420 + relocate_wait_code(); + + /* Reconfigure secondary cores */ + secondary_cores_configure(); +#endif + reset_status = get_reset_status(); switch (reset_status) { diff --git a/arch/arm/cpu/armv7/exynos/sec_boot.S b/arch/arm/cpu/armv7/exynos/sec_boot.S new file mode 100644 index 0000000..dfc3455 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/sec_boot.S @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * Akshay Saraswat <akshay.s@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <asm/arch/cpu.h> + + .globl relocate_wait_code +relocate_wait_code: + adr r0, code_base @ r0: source address (start) + adr r1, code_end @ r1: source address (end) + ldr r2, =0x02073000 @ r2: target address +1: + ldmia r0!, {r3-r6} + stmia r2!, {r3-r6} + cmp r0, r1 + blt 1b + b code_end + .ltorg +/* + * Secondary core waits here until Primary wake it up. + * Below code is copied to CONFIG_EXYNOS_RELOCATE_CODE_BASE. + * This is a workaround code which is supposed to act as a + * substitute/supplement to the iROM code. + * + * This workaround code is relocated to the address 0x02073000 + * because that comes out to be the last 4KB of the iRAM + * (Base Address - 0x02020000, Limit Address - 0x020740000). + * + * U-boot and kernel are aware of this code and flags by the simple + * fact that we are implementing a workaround in the last 4KB + * of the iRAM and we have already defined these flag and address + * values in both kernel and U-boot for our use. + */ +code_base: + b 1f +/* + * These addresses are being used as flags in u-boot and kernel. + * + * Jump address for resume and flag to check for resume/reset: + * Resume address - 0x2073008 + * Resume flag - 0x207300C + * + * Jump address for cluster switching: + * Switch address - 0x2073018 + * + * Jump address for core hotplug: + * Hotplug address - 0x207301C + * + * Jump address for C2 state (Reserved for future not being used right now): + * C2 address - 0x2073024 + * + * Managed per core status for the active cluster: + * CPU0 state - 0x2073028 + * CPU1 state - 0x207302C + * CPU2 state - 0x2073030 + * CPU3 state - 0x2073034 + * + * Managed per core GIC status for the active cluster: + * CPU0 gic state - 0x2073038 + * CPU1 gic state - 0x207303C + * CPU2 gic state - 0x2073040 + * CPU3 gic state - 0x2073044 + * + * Logic of the code: + * Step-1: Read current CPU status. + * Step-2: If it's a resume then continue, else jump to step 4. + * Step-3: Clear inform1 PMU register and jump to inform0 value. + * Step-4: If it's a switch, C2 or reset, get the hotplug address. + * Step-5: If address is not available, enter WFE. + * Step-6: If address is available, jump to that address. + */ + nop @ for backward compatibility + .word 0x0 @ REG0: RESUME_ADDR + .word 0x0 @ REG1: RESUME_FLAG + .word 0x0 @ REG2 + .word 0x0 @ REG3 +_switch_addr: + .word 0x0 @ REG4: SWITCH_ADDR +_hotplug_addr: + .word 0x0 @ REG5: CPU1_BOOT_REG + .word 0x0 @ REG6 +_c2_addr: + .word 0x0 @ REG7: REG_C2_ADDR +_cpu_state: + .word 0x1 @ CPU0_STATE : RESET + .word 0x2 @ CPU1_STATE : SECONDARY RESET + .word 0x2 @ CPU2_STATE : SECONDARY RESET + .word 0x2 @ CPU3_STATE : SECONDARY RESET +_gic_state: + .word 0x0 @ CPU0 - GICD_IGROUPR0 + .word 0x0 @ CPU1 - GICD_IGROUPR0 + .word 0x0 @ CPU2 - GICD_IGROUPR0 + .word 0x0 @ CPU3 - GICD_IGROUPR0 +1: + adr r0, _cpu_state + mrc p15, 0, r7, c0, c0, 5 @ read MPIDR + and r7, r7, #0xf @ r7 = cpu id +/* Read the current cpu state */ + ldr r10, [r0, r7, lsl #2] +svc_entry: + tst r10, #(1 << 4) + adrne r0, _switch_addr + bne wait_for_addr +/* Clear INFORM1 */ + ldr r0, =(0x10040000 + 0x804) + ldr r1, [r0] + cmp r1, #0x0 + movne r1, #0x0 + strne r1, [r0] +/* Get INFORM0 */ + ldrne r1, =(0x10040000 + 0x800) + ldrne pc, [r1] + tst r10, #(1 << 0) + ldrne pc, =0x23e00000 + adr r0, _hotplug_addr +wait_for_addr: + ldr r1, [r0] + cmp r1, #0x0 + bxne r1 + wfe + b wait_for_addr + .ltorg +code_end: + mov pc, lr diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c index 8c7d7d8..0f116b1 100644 --- a/arch/arm/cpu/armv7/exynos/soc.c +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -9,13 +9,6 @@ #include <asm/io.h> #include <asm/system.h> -enum l2_cache_params { - CACHE_TAG_RAM_SETUP = (1 << 9), - CACHE_DATA_RAM_SETUP = (1 << 5), - CACHE_TAG_RAM_LATENCY = (2 << 6), - CACHE_DATA_RAM_LATENCY = (2 << 0) -}; - void reset_cpu(ulong addr) { writel(0x1, samsung_get_base_swreset()); @@ -28,31 +21,3 @@ void enable_caches(void) dcache_enable(); } #endif - -#ifndef CONFIG_SYS_L2CACHE_OFF -/* - * Set L2 cache parameters - */ -static void exynos5_set_l2cache_params(void) -{ - unsigned int val = 0; - - asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(val)); - - val |= CACHE_TAG_RAM_SETUP | - CACHE_DATA_RAM_SETUP | - CACHE_TAG_RAM_LATENCY | - CACHE_DATA_RAM_LATENCY; - - asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); -} - -/* - * Sets L2 cache related parameters before enabling data cache - */ -void v7_outer_cache_enable(void) -{ - if (cpu_is_exynos5()) - exynos5_set_l2cache_params(); -} -#endif diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 29674ad..e739520 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -153,6 +153,10 @@ #define EXYNOS5420_CLOCK_BASE 0x10010000 #define EXYNOS5420_POWER_BASE 0x10040000 #define EXYNOS5420_SWRESET 0x10040400 +#define EXYNOS5420_INFORM_BASE 0x10040800 +#define EXYNOS5420_SPARE_BASE 0x10040900 +#define EXYNOS5420_CPU_CONFIG_BASE 0x10042000 +#define EXYNOS5420_CPU_STATUS_BASE 0x10042004 #define EXYNOS5420_SYSREG_BASE 0x10050000 #define EXYNOS5420_TZPC_BASE 0x100E0000 #define EXYNOS5420_WATCHDOG_BASE 0x101D0000 @@ -186,6 +190,7 @@ #define EXYNOS5420_USB3PHY_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5420_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE + #ifndef __ASSEMBLY__ #include <asm/io.h> /* CPU detection macros */ diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h index 4968d3d..3ffb296 100644 --- a/arch/arm/include/asm/arch-exynos/system.h +++ b/arch/arm/include/asm/arch-exynos/system.h @@ -37,6 +37,94 @@ struct exynos5_sysreg { #define USB20_PHY_CFG_HOST_LINK_EN (1 << 0) +/* + * Data Synchronization Barrier acts as a special kind of memory barrier. + * No instruction in program order after this instruction executes until + * this instruction completes. This instruction completes when: + * - All explicit memory accesses before this instruction complete. + * - All Cache, Branch predictor and TLB maintenance operations before + * this instruction complete. + */ +#define dsb() __asm__ __volatile__ ("dsb\n\t" : : ); + +/* + * This instruction causes an event to be signaled to all cores + * within a multiprocessor system. If SEV is implemented, + * WFE must also be implemented. + */ +#define sev() __asm__ __volatile__ ("sev\n\t" : : ); +/* + * If the Event Register is not set, WFE suspends execution until + * one of the following events occurs: + * - an IRQ interrupt, unless masked by the CPSR I-bit + * - an FIQ interrupt, unless masked by the CPSR F-bit + * - an Imprecise Data abort, unless masked by the CPSR A-bit + * - a Debug Entry request, if Debug is enabled + * - an Event signaled by another processor using the SEV instruction. + * If the Event Register is set, WFE clears it and returns immediately. + * If WFE is implemented, SEV must also be implemented. + */ +#define wfe() __asm__ __volatile__ ("wfe\n\t" : : ); + +/* Move 0xd3 value to CPSR register to enable SVC mode */ +#define svc32_mode_en() __asm__ __volatile__ \ + ("@ I&F disable, Mode: 0x13 - SVC\n\t" \ + "msr cpsr_c, #0x13|0xC0\n\t" : : ) + +/* Set program counter with the given value */ +#define set_pc(x) __asm__ __volatile__ ("mov pc, %0\n\t" : : "r"(x)) + +/* Branch to the given location */ +#define branch_bx(x) __asm__ __volatile__ ("bx %0\n\t" : : "r"(x)) + +/* Read Main Id register */ +#define mrc_midr(x) __asm__ __volatile__ \ + ("mrc p15, 0, %0, c0, c0, 0\n\t" : "=r"(x) : ) + +/* Read Multiprocessor Affinity Register */ +#define mrc_mpafr(x) __asm__ __volatile__ \ + ("mrc p15, 0, %0, c0, c0, 5\n\t" : "=r"(x) : ) + +/* Read System Control Register */ +#define mrc_sctlr(x) __asm__ __volatile__ \ + ("mrc p15, 0, %0, c1, c0, 0\n\t" : "=r"(x) : ) + +/* Read Auxiliary Control Register */ +#define mrc_auxr(x) __asm__ __volatile__ \ + ("mrc p15, 0, %0, c1, c0, 1\n\t" : "=r"(x) : ) + +/* Read L2 Control register */ +#define mrc_l2_ctlr(x) __asm__ __volatile__ \ + ("mrc p15, 1, %0, c9, c0, 2\n\t" : "=r"(x) : ) + +/* Read L2 Auxilliary Control register */ +#define mrc_l2_aux_ctlr(x) __asm__ __volatile__ \ + ("mrc p15, 1, %0, c15, c0, 0\n\t" : "=r"(x) : ) + +/* Write System Control Register */ +#define mcr_sctlr(x) __asm__ __volatile__ \ + ("mcr p15, 0, %0, c1, c0, 0\n\t" : : "r"(x)) + +/* Write Auxiliary Control Register */ +#define mcr_auxr(x) __asm__ __volatile__ \ + ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(x)) + +/* Invalidate all instruction caches to PoU */ +#define mcr_icache(x) __asm__ __volatile__ \ + ("mcr p15, 0, %0, c7, c5, 0\n\t" : : "r"(x)) + +/* Invalidate unified TLB */ +#define mcr_tlb(x) __asm__ __volatile__ \ + ("mcr p15, 0, %0, c8, c7, 0\n\t" : : "r"(x)) + +/* Write L2 Control register */ +#define mcr_l2_ctlr(x) __asm__ __volatile__ \ + ("mcr p15, 1, %0, c9, c0, 2\n\t" : : "r"(x)) + +/* Write L2 Auxilliary Control register */ +#define mcr_l2_aux_ctlr(x) __asm__ __volatile__ \ + ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(x)) + void set_usbhost_mode(unsigned int mode); void set_system_display_ctrl(void); int exynos_lcd_early_init(const void *blob); diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h index a13da23..dc9561c 100644 --- a/arch/arm/include/asm/armv7.h +++ b/arch/arm/include/asm/armv7.h @@ -69,6 +69,50 @@ #define CP15DSB asm volatile ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)) #define CP15DMB asm volatile ("mcr p15, 0, %0, c7, c10, 5" : : "r" (0)) +/* + * Workaround for ARM errata # 798870 + * Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been + * stalled for 1024 cycles to verify that its hazard condition still exists. + */ +static inline void v7_enable_l2_hazard_detect(void) +{ + uint32_t val; + + /* L2ACTLR[7]: Enable hazard detect timeout */ + asm volatile ("mrc p15, 1, %0, c15, c0, 0\n\t" : "=r"(val)); + val |= (1 << 7); + asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(val)); +} + +/* + * Workaround for ARM errata # 799270 + * Ensure that the L2 logic has been used within the previous 256 cycles + * before modifying the ACTLR.SMP bit. This is required during boot before + * MMU has been enabled, or during a specified reset or power down sequence. + */ +static inline void v7_enable_smp(uint32_t address) +{ + uint32_t temp, val; + + /* Read auxiliary control register */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1\n\t" : "=r"(val)); + + /* Enable SMP */ + val |= (1 << 6); + + /* Dummy read to assure L2 access */ + temp = readl(address); + temp &= 0; + val |= temp; + + /* Write auxiliary control register */ + asm volatile ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(val)); + + CP15DSB; + CP15ISB; +} + +void v7_en_l2_hazard_detect(void); void v7_outer_cache_enable(void); void v7_outer_cache_disable(void); void v7_outer_cache_flush_all(void); |