diff options
author | Marek Vasut <marex@denx.de> | 2016-11-16 16:20:23 (GMT) |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2016-12-06 00:45:56 (GMT) |
commit | beee6a3083ebf08438aaf79eaeec23d0b5f9fec3 (patch) | |
tree | 01817203e17273a5a347b9e2e2940dba4f1f494f /arch/arm | |
parent | e9c847c363a1e0b7d964af7a0a46744a22a0a2ce (diff) | |
download | u-boot-beee6a3083ebf08438aaf79eaeec23d0b5f9fec3.tar.xz |
ARM: socfpga: Add boot0 hook to prevent SPL corruption
Valid Altera SoCFPGA preloader image must contain special data at
offsets 0x40, 0x44, 0x48 and valid instructions at address 0x4c or
0x50. These addresses are by default used by U-Boot's vector table
and a piece of reset handler, thus a valid preloader corrupts those
addresses slightly. While this works most of the time, this can and
does prevent the board from rebooting sometimes and triggering this
issue may even depend on compiler.
The problem is that when SoCFPGA performs warm reset, it checks the
addresses 0x40..0x4b in SRAM for a valid preloader signature and
header checksum. If those are found, it jumps to address 0x4c or
0x50 (this is unclear). These addresses are populated by the first
few instructions of arch/arm/cpu/armv7/start.S:
ffff0040 <data_abort>:
ffff0040: ebfffffe bl ffff0040 <data_abort>
ffff0044 <reset>:
ffff0044: ea000012 b ffff0094 <save_boot_params>
ffff0048 <save_boot_params_ret>:
ffff0048: e10f0000 mrs r0, CPSR
ffff004c: e200101f and r1, r0, #31
ffff0050: e331001a teq r1, #26
Without this patch, the CPU will enter the code at 0xffff004c or
0xffff0050 , at which point the value of r0 and r1 registers is
undefined. Moreover, jumping directly to the preloader entry point
at address 0xffff0000 will also fail, because address 0xffff004.
is invalid and contains the preloader magic.
Add BOOT0 hook which reserves the area at offset 0x40..0x5f and
populates offset 0x50 with jump to the entry point. This way, the
preloader signature is stored in reserved space and can not corrupt
the SPL code.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Stefan Roese <sr@denx.de>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-socfpga/include/mach/boot0.h | 28 |
2 files changed, 29 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index de4bf83..7203d63 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -542,6 +542,7 @@ config ARCH_SOCFPGA select DM select DM_SPI_FLASH select DM_SPI + select ENABLE_ARM_SOC_BOOT0_HOOK config TARGET_CM_T43 bool "Support cm_t43" diff --git a/arch/arm/mach-socfpga/include/mach/boot0.h b/arch/arm/mach-socfpga/include/mach/boot0.h new file mode 100644 index 0000000..aaada31 --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/boot0.h @@ -0,0 +1,28 @@ +/* + * Specialty padding for the Altera SoCFPGA preloader image + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BOOT0_H +#define __BOOT0_H + +#ifdef CONFIG_SPL_BUILD +#define ARM_SOC_BOOT0_HOOK \ + .balignl 64,0xf33db33f; \ + \ + .word 0x1337c0d3; /* SoCFPGA preloader validation word */ \ + .word 0xc01df00d; /* Version, flags, length */ \ + .word 0xcafec0d3; /* Checksum, zero-pad */ \ + nop; \ + \ + b reset; /* SoCFPGA jumps here */ \ + nop; \ + nop; \ + nop; +#else +#define ARM_SOC_BOOT0_HOOK +#endif + + +#endif /* __BOOT0_H */ |