diff options
author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-10-02 12:53:27 (GMT) |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-10-02 12:53:27 (GMT) |
commit | f04c53762962280365005c9db12ab561a18f2692 (patch) | |
tree | 6cd2fa04929473afda1cceaa297cd340792bd326 /arch/arm | |
parent | 5c8d5b6fc15fc2c52d74c266d9fe6eb5f75cbcb4 (diff) | |
parent | ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2 (diff) | |
download | u-boot-f04c53762962280365005c9db12ab561a18f2692.tar.xz |
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 5 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 5 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 209 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/start.S | 50 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 40 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx27/imx-regs.h | 6 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/clock.h | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/crm_regs.h | 2 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/iomux.h | 5 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 6 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 12 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mxs/sys_proto.h | 5 |
13 files changed, 313 insertions, 34 deletions
diff --git a/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c b/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c index 8db2a67..629b727 100644 --- a/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c +++ b/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c @@ -38,5 +38,10 @@ int main(void) DEFINE(ESDCFG1_ROF, offsetof(struct esdramc_regs, esdcfg1)); DEFINE(ESDMISC_ROF, offsetof(struct esdramc_regs, esdmisc)); + DEFINE(GPCR, IMX_SYSTEM_CTL_BASE + + offsetof(struct system_control_regs, gpcr)); + DEFINE(FMCR, IMX_SYSTEM_CTL_BASE + + offsetof(struct system_control_regs, fmcr)); + return 0; } diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 0392afd..68c30af 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -102,8 +102,9 @@ static uint8_t mxs_get_bootmode_index(void) return i; } -void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, - const unsigned int iomux_size) +void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, + const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size) { struct mxs_spl_data *data = (struct mxs_spl_data *) ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index f357959..4275c5d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -14,6 +14,13 @@ #include "mxs_init.h" +/** + * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL + * + * This function switches the CPU core clock from PLL to 24MHz XTAL + * oscilator. This is necessary if the PLL is being reconfigured to + * prevent crash of the CPU core. + */ static void mxs_power_clock2xtal(void) { struct mxs_clkctrl_regs *clkctrl_regs = @@ -24,6 +31,13 @@ static void mxs_power_clock2xtal(void) &clkctrl_regs->hw_clkctrl_clkseq_set); } +/** + * mxs_power_clock2pll() - Switch CPU core clock source to PLL + * + * This function switches the CPU core clock from 24MHz XTAL oscilator + * to PLL. This can only be called once the PLL has re-locked and once + * the PLL is stable after reconfiguration. + */ static void mxs_power_clock2pll(void) { struct mxs_clkctrl_regs *clkctrl_regs = @@ -36,6 +50,13 @@ static void mxs_power_clock2pll(void) CLKCTRL_CLKSEQ_BYPASS_CPU); } +/** + * mxs_power_set_auto_restart() - Set the auto-restart bit + * + * This function ungates the RTC block and sets the AUTO_RESTART + * bit to work around a design bug on MX28EVK Rev. A . + */ + static void mxs_power_set_auto_restart(void) { struct mxs_rtc_regs *rtc_regs = @@ -66,6 +87,14 @@ static void mxs_power_set_auto_restart(void) ; } +/** + * mxs_power_set_linreg() - Set linear regulators 25mV below DC-DC converter + * + * This function configures the VDDIO, VDDA and VDDD linear regulators output + * to be 25mV below the VDDIO, VDDA and VDDD output from the DC-DC switching + * converter. This is the recommended setting for the case where we use both + * linear regulators and DC-DC converter to power the VDDIO rail. + */ static void mxs_power_set_linreg(void) { struct mxs_power_regs *power_regs = @@ -85,6 +114,11 @@ static void mxs_power_set_linreg(void) POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); } +/** + * mxs_get_batt_volt() - Measure battery input voltage + * + * This function retrieves the battery input voltage and returns it. + */ static int mxs_get_batt_volt(void) { struct mxs_power_regs *power_regs = @@ -96,11 +130,24 @@ static int mxs_get_batt_volt(void) return volt; } +/** + * mxs_is_batt_ready() - Test if the battery provides enough voltage to boot + * + * This function checks if the battery input voltage is higher than 3.6V and + * therefore allows the system to successfully boot using this power source. + */ static int mxs_is_batt_ready(void) { return (mxs_get_batt_volt() >= 3600); } +/** + * mxs_is_batt_good() - Test if battery is operational at all + * + * This function starts recharging the battery and tests if the input current + * provided by the 5V input recharging the battery is also sufficient to power + * the DC-DC converter. + */ static int mxs_is_batt_good(void) { struct mxs_power_regs *power_regs = @@ -141,6 +188,15 @@ static int mxs_is_batt_good(void) return 0; } +/** + * mxs_power_setup_5v_detect() - Start the 5V input detection comparator + * + * This function enables the 5V detection comparator and sets the 5V valid + * threshold to 4.4V . We use 4.4V threshold here to make sure that even + * under high load, the voltage drop on the 5V input won't be so critical + * to cause undervolt on the 4P2 linear regulator supplying the DC-DC + * converter and thus making the system crash. + */ static void mxs_power_setup_5v_detect(void) { struct mxs_power_regs *power_regs = @@ -153,6 +209,12 @@ static void mxs_power_setup_5v_detect(void) POWER_5VCTRL_PWRUP_VBUS_CMPS); } +/** + * mxs_src_power_init() - Preconfigure the power block + * + * This function configures reasonable values for the DC-DC control loop + * and battery monitor. + */ static void mxs_src_power_init(void) { struct mxs_power_regs *power_regs = @@ -184,6 +246,12 @@ static void mxs_src_power_init(void) clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); } +/** + * mxs_power_init_4p2_params() - Configure the parameters of the 4P2 regulator + * + * This function configures the necessary parameters for the 4P2 linear + * regulator to supply the DC-DC converter from 5V input. + */ static void mxs_power_init_4p2_params(void) { struct mxs_power_regs *power_regs = @@ -208,6 +276,12 @@ static void mxs_power_init_4p2_params(void) 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } +/** + * mxs_enable_4p2_dcdc_input() - Enable or disable the DCDC input from 4P2 + * @xfer: Select if the input shall be enabled or disabled + * + * This function enables or disables the 4P2 input into the DC-DC converter. + */ static void mxs_enable_4p2_dcdc_input(int xfer) { struct mxs_power_regs *power_regs = @@ -304,6 +378,12 @@ static void mxs_enable_4p2_dcdc_input(int xfer) POWER_CTRL_ENIRQ_VDD5V_DROOP); } +/** + * mxs_power_init_4p2_regulator() - Start the 4P2 regulator + * + * This function enables the 4P2 regulator and switches the DC-DC converter + * to use the 4P2 input. + */ static void mxs_power_init_4p2_regulator(void) { struct mxs_power_regs *power_regs = @@ -388,6 +468,12 @@ static void mxs_power_init_4p2_regulator(void) writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); } +/** + * mxs_power_init_dcdc_4p2_source() - Switch DC-DC converter to 4P2 source + * + * This function configures the DC-DC converter to be supplied from the 4P2 + * linear regulator. + */ static void mxs_power_init_dcdc_4p2_source(void) { struct mxs_power_regs *power_regs = @@ -410,6 +496,12 @@ static void mxs_power_init_dcdc_4p2_source(void) } } +/** + * mxs_power_enable_4p2() - Power up the 4P2 regulator + * + * This function drives the process of powering up the 4P2 linear regulator + * and switching the DC-DC converter input over to the 4P2 linear regulator. + */ static void mxs_power_enable_4p2(void) { struct mxs_power_regs *power_regs = @@ -469,6 +561,14 @@ static void mxs_power_enable_4p2(void) &power_regs->hw_power_charge_clr); } +/** + * mxs_boot_valid_5v() - Boot from 5V supply + * + * This function configures the power block to boot from valid 5V input. + * This is called only if the 5V is reliable and can properly supply the + * CPU. This function proceeds to configure the 4P2 converter to be supplied + * from the 5V input. + */ static void mxs_boot_valid_5v(void) { struct mxs_power_regs *power_regs = @@ -492,6 +592,11 @@ static void mxs_boot_valid_5v(void) mxs_power_enable_4p2(); } +/** + * mxs_powerdown() - Shut down the system + * + * This function powers down the CPU completely. + */ static void mxs_powerdown(void) { struct mxs_power_regs *power_regs = @@ -501,6 +606,12 @@ static void mxs_powerdown(void) &power_regs->hw_power_reset); } +/** + * mxs_batt_boot() - Configure the power block to boot from battery input + * + * This function configures the power block to boot from the battery voltage + * supply. + */ static void mxs_batt_boot(void) { struct mxs_power_regs *power_regs = @@ -545,6 +656,14 @@ static void mxs_batt_boot(void) 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } +/** + * mxs_handle_5v_conflict() - Test if the 5V input is reliable + * + * This function tests if the 5V input can reliably supply the system. If it + * can, then proceed to configuring the system to boot from 5V source, otherwise + * try booting from battery supply. If we can not boot from battery supply + * either, shut down the system. + */ static void mxs_handle_5v_conflict(void) { struct mxs_power_regs *power_regs = @@ -581,6 +700,12 @@ static void mxs_handle_5v_conflict(void) } } +/** + * mxs_5v_boot() - Configure the power block to boot from 5V input + * + * This function handles configuration of the power block when supplied by + * a 5V input. + */ static void mxs_5v_boot(void) { struct mxs_power_regs *power_regs = @@ -604,6 +729,12 @@ static void mxs_5v_boot(void) mxs_handle_5v_conflict(); } +/** + * mxs_init_batt_bo() - Configure battery brownout threshold + * + * This function configures the battery input brownout threshold. The value + * at which the battery brownout happens is configured to 3.0V in the code. + */ static void mxs_init_batt_bo(void) { struct mxs_power_regs *power_regs = @@ -618,6 +749,12 @@ static void mxs_init_batt_bo(void) writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr); } +/** + * mxs_switch_vddd_to_dcdc_source() - Switch VDDD rail to DC-DC converter + * + * This function turns off the VDDD linear regulator and therefore makes + * the VDDD rail be supplied only by the DC-DC converter. + */ static void mxs_switch_vddd_to_dcdc_source(void) { struct mxs_power_regs *power_regs = @@ -632,6 +769,15 @@ static void mxs_switch_vddd_to_dcdc_source(void) POWER_VDDDCTRL_DISABLE_STEPPING); } +/** + * mxs_power_configure_power_source() - Configure power block source + * + * This function is the core of the power configuration logic. The function + * selects the power block input source and configures the whole power block + * accordingly. After the configuration is complete and the system is stable + * again, the function switches the CPU clock source back to PLL. Finally, + * the function switches the voltage rails to DC-DC converter. + */ static void mxs_power_configure_power_source(void) { int batt_ready, batt_good; @@ -676,6 +822,15 @@ static void mxs_power_configure_power_source(void) #endif } +/** + * mxs_enable_output_rail_protection() - Enable power rail protection + * + * This function enables overload protection on the power rails. This is + * triggered if the power rails' voltage drops rapidly due to overload and + * in such case, the supply to the powerrail is cut-off, protecting the + * CPU from damage. Note that under such condition, the system will likely + * crash or misbehave. + */ static void mxs_enable_output_rail_protection(void) { struct mxs_power_regs *power_regs = @@ -694,6 +849,13 @@ static void mxs_enable_output_rail_protection(void) POWER_VDDIOCTRL_PWDN_BRNOUT); } +/** + * mxs_get_vddio_power_source_off() - Get VDDIO rail power source + * + * This function tests if the VDDIO rail is supplied by linear regulator + * or by the DC-DC converter. Returns 1 if powered by linear regulator, + * returns 0 if powered by the DC-DC converter. + */ static int mxs_get_vddio_power_source_off(void) { struct mxs_power_regs *power_regs = @@ -722,6 +884,13 @@ static int mxs_get_vddio_power_source_off(void) } +/** + * mxs_get_vddd_power_source_off() - Get VDDD rail power source + * + * This function tests if the VDDD rail is supplied by linear regulator + * or by the DC-DC converter. Returns 1 if powered by linear regulator, + * returns 0 if powered by the DC-DC converter. + */ static int mxs_get_vddd_power_source_off(void) { struct mxs_power_regs *power_regs = @@ -810,6 +979,18 @@ static const struct mxs_vddx_cfg mxs_vddmem_cfg = { }; #endif +/** + * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail + * @cfg: Configuration data of the DC-DC converter rail + * @new_target: New target voltage of the DC-DC converter rail + * @new_brownout: New brownout trigger voltage + * + * This function configures the output voltage on the DC-DC converter rail. + * The rail is selected by the @cfg argument. The new voltage target is + * selected by the @new_target and the voltage is specified in mV. The + * new brownout value is selected by the @new_brownout argument and the + * value is also in mV. + */ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, uint32_t new_target, uint32_t new_brownout) { @@ -883,6 +1064,14 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, } } +/** + * mxs_setup_batt_detect() - Start the battery voltage measurement logic + * + * This function starts and configures the LRADC block. This allows the + * power initialization code to measure battery voltage and based on this + * knowledge, decide whether to boot at all, boot from battery or boot + * from 5V input. + */ static void mxs_setup_batt_detect(void) { mxs_lradc_init(); @@ -890,6 +1079,14 @@ static void mxs_setup_batt_detect(void) early_delay(10); } +/** + * mxs_ungate_power() - Ungate the POWER block + * + * This function ungates clock to the power block. In case the power block + * was still gated at this point, it will not be possible to configure the + * block and therefore the power initialization would fail. This function + * is only needed on i.MX233, on i.MX28 the power block is always ungated. + */ static void mxs_ungate_power(void) { #ifdef CONFIG_MX23 @@ -900,6 +1097,12 @@ static void mxs_ungate_power(void) #endif } +/** + * mxs_power_init() - The power block init main function + * + * This function calls all the power block initialization functions in + * proper sequence to start the power block. + */ void mxs_power_init(void) { struct mxs_power_regs *power_regs = @@ -933,6 +1136,12 @@ void mxs_power_init(void) } #ifdef CONFIG_SPL_MXS_PSWITCH_WAIT +/** + * mxs_power_wait_pswitch() - Wait for power switch to be pressed + * + * This function waits until the power-switch was pressed to start booting + * the board. + */ void mxs_power_wait_pswitch(void) { struct mxs_power_regs *power_regs = diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 94b2b3f..3e454ae 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -152,39 +152,49 @@ _reset: /* * Store all registers on old stack pointer, this will allow us later to * return to the BootROM and let the BootROM load U-Boot into RAM. + * + * WARNING: Register r0 and r1 are used by the BootROM to pass data + * to the called code. Register r0 will contain arbitrary + * data that are set in the BootStream. In case this code + * was started with CALL instruction, register r1 will contain + * pointer to the return value this function can then set. + * The code below MUST NOT CHANGE register r0 and r1 ! */ push {r0-r12,r14} - /* save control register c1 */ - mrc p15, 0, r0, c1, c0, 0 - push {r0} + /* Save control register c1 */ + mrc p15, 0, r2, c1, c0, 0 + push {r2} - /* - * set the cpu to SVC32 mode and store old CPSR register content - */ - mrs r0,cpsr - push {r0} - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 + /* Set the cpu to SVC32 mode and store old CPSR register content. */ + mrs r2, cpsr + push {r2} + bic r2, r2, #0x1f + orr r2, r2, #0xd3 + msr cpsr, r2 bl board_init_ll + /* Restore BootROM's CPU mode (especially FIQ). */ + pop {r2} + msr cpsr,r2 + /* - * restore bootrom's cpu mode (especially FIQ) + * Restore c1 register. Especially set exception vector location + * back to BootROM space which is required by bootrom for USB boot. */ - pop {r0} - msr cpsr,r0 + pop {r2} + mcr p15, 0, r2, c1, c0, 0 + + pop {r0-r12,r14} /* - * restore c1 register - * (especially set exception vector location back to - * bootrom space which is required by bootrom for USB boot) + * In case this code was started by the CALL instruction, the register + * r0 is examined by the BootROM after this code returns. The value in + * r0 must be set to 0 to indicate successful return. */ - pop {r0} - mcr p15, 0, r0, c1, c0, 0 + mov r0, #0 - pop {r0-r12,r14} bx lr _hang: diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 7efb0d2..df11678 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -228,13 +228,13 @@ static u32 get_axi_clk(void) static u32 get_emi_slow_clk(void) { - u32 emi_clk_sel, emi_slow_pof, cscmr1, root_freq = 0; + u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0; cscmr1 = __raw_readl(&imx_ccm->cscmr1); emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK; emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET; - emi_slow_pof = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK; - emi_slow_pof >>= MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET; + emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK; + emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET; switch (emi_clk_sel) { case 0: @@ -251,7 +251,7 @@ static u32 get_emi_slow_clk(void) break; } - return root_freq / (emi_slow_pof + 1); + return root_freq / (emi_slow_podf + 1); } #ifdef CONFIG_MX6SL @@ -282,6 +282,36 @@ static u32 get_mmdc_ch0_clk(void) return freq / (podf + 1); } + +int enable_fec_anatop_clock(void) +{ + u32 reg = 0; + s32 timeout = 100000; + + struct anatop_regs __iomem *anatop = + (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; + + reg = readl(&anatop->pll_enet); + if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) || + (!(reg & BM_ANADIG_PLL_ENET_LOCK))) { + reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN; + writel(reg, &anatop->pll_enet); + while (timeout--) { + if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK) + break; + } + if (timeout < 0) + return -ETIMEDOUT; + } + + /* Enable FEC clock */ + reg |= BM_ANADIG_PLL_ENET_ENABLE; + reg &= ~BM_ANADIG_PLL_ENET_BYPASS; + writel(reg, &anatop->pll_enet); + + return 0; +} + #else static u32 get_mmdc_ch0_clk(void) { @@ -457,7 +487,7 @@ void enable_ipu_clock(void) struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; int reg; reg = readl(&mxc_ccm->CCGR3); - reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET; + reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK; writel(reg, &mxc_ccm->CCGR3); } /***************************************************/ diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index a27145b..92c847e 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -169,7 +169,7 @@ struct iim_regs { struct fuse_bank { u32 fuse_regs[0x20]; u32 fuse_rsvd[0xe0]; - } bank[1]; + } bank[2]; }; struct fuse_bank0_regs { @@ -209,9 +209,13 @@ struct fuse_bank0_regs { #define IIM_BASE_ADDR IMX_IIM_BASE #define IMX_FEC_BASE (0x2b000 + IMX_IO_BASE) +#define IMX_NFC_BASE (0xD8000000) #define IMX_ESD_BASE (0xD8001000) #define IMX_WEIM_BASE (0xD8002000) +#define NFC_BASE_ADDR IMX_NFC_BASE + + /* FMCR System Control bit definition*/ #define UART4_RXD_CTL (1 << 25) #define UART4_RTS_CTL (1 << 24) diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index c493687..93f29a7 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -50,4 +50,5 @@ void enable_usboh3_clk(unsigned char enable); int enable_sata_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); void enable_ipu_clock(void); +int enable_fec_anatop_clock(void); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 74aefe6..2813593 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -892,7 +892,7 @@ struct mxc_ccm_reg { #define PLL2_PFD0_FREQ 352000000 #define PLL2_PFD1_FREQ 594000000 -#define PLL2_PFD2_FREQ 400000000 +#define PLL2_PFD2_FREQ 396000000 #define PLL2_PFD2_DIV_FREQ 200000000 #define PLL3_PFD0_FREQ 720000000 #define PLL3_PFD1_FREQ 540000000 diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h index f4cfd4f..ff13a1e 100644 --- a/arch/arm/include/asm/arch-mx6/iomux.h +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -27,6 +27,11 @@ #define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) #define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) +#define IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17) +#define IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14) +#define IOMUX_GPR1_FEC_MASK (IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK \ + | IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK) + #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0<<24) #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (1<<24) #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (2<<24) diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index c3d0b70..b5df68a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -235,7 +235,7 @@ enum { MX6_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0), MX6_PAD_DISP0_DAT1__MMDC_MMDC_DEBUG_6 = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x0000, 0, 0), MX6_PAD_DISP0_DAT1__PL301_SIM_MX6DL_PER1_HADDR_12 = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0), - MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DISP0_DAT10__LCDIF_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DISP0_DAT10__USDHC1_USDHC_DEBUG_6 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x0000, 0, 0), MX6_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0), @@ -309,7 +309,7 @@ enum { MX6_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0), MX6_PAD_DISP0_DAT19__MMDC_MMDC_DEBUG_24 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0), MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0), - MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DISP0_DAT2__LCDIF_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0), MX6_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x0000, 0, 0), MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DEBUG_2 = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0), @@ -1043,7 +1043,7 @@ enum { MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05E0, 0x0210, 0, 0x083C, 1, 0), MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0), MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05E0, 0x0210, 2, 0x08CC, 1, 0), - MX6_PAD_GPIO_1__USBOTG_ID = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0), + MX6_PAD_GPIO_1__USB_OTG_ID = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0), MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05E0, 0x0210, 4, 0x0000, 0, 0), MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index 94df007..fe9a8c3 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -984,6 +984,7 @@ enum { MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0), MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0), MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0), + MX6_PAD_GPIO_1__USB_OTG_ID = IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, 0), MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0), MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h index b39a354..5f9c90a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -18,5 +18,17 @@ enum { MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0), MX6_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0), MX6_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0), + + MX6_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x41c, 0x12c, 0, 0x000, 0, 0), + MX6_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x420, 0x130, 0, 0x6f4, 1, 0), + MX6_PAD_FEC_CRS_DV__FEC_RX_DV = IOMUX_PAD(0x418, 0x128, 0, 0x704, 1, 0), + MX6_PAD_FEC_RXD0__FEC_RX_DATA0 = IOMUX_PAD(0x42c, 0x13c, 0, 0x6f8, 0, 0), + MX6_PAD_FEC_RXD1__FEC_RX_DATA1 = IOMUX_PAD(0x430, 0x140, 0, 0x6fc, 1, 0), + MX6_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x438, 0x148, 0, 0x000, 0, 0), + MX6_PAD_FEC_TXD0__FEC_TX_DATA0 = IOMUX_PAD(0x43c, 0x14c, 0, 0x000, 0, 0), + MX6_PAD_FEC_TXD1__FEC_TX_DATA1 = IOMUX_PAD(0x440, 0x150, 0, 0x000, 0, 0), + MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0), + MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0), + MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0), }; #endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 1038592..43c7dd6 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -28,8 +28,9 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)); #include <asm/arch/iomux-mx28.h> #endif -void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, - const unsigned int iomux_size); +void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, + const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size); #endif struct mxs_pair { |