diff options
author | Ruchika Gupta <ruchika.gupta@nxp.com> | 2017-04-17 12:37:17 (GMT) |
---|---|---|
committer | York Sun <york.sun@nxp.com> | 2017-04-17 16:03:30 (GMT) |
commit | 70f9661ca9130c446c146f582046024eddaaee31 (patch) | |
tree | 0aff9deda35c319115c63ed13f271bb17a2e3ef9 /arch/arm | |
parent | 11d14bfb756331bc26ee6ea118f9c1bd8aa0fc65 (diff) | |
download | u-boot-70f9661ca9130c446c146f582046024eddaaee31.tar.xz |
arm: ls1043ardb: Add SD secure boot target
- Add SD secure boot target for ls1043ardb.
- Implement FSL_LSCH2 specific spl_board_init() to setup CAAM stream
ID and corresponding stream ID in SMMU.
- Change the u-boot size defined by a macro for copying the main
U-Boot by SPL to also include the u-boot Secure Boot header size as
header is appended to u-boot image. So header will also be copied
from SD to DDR.
- CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM
(128K) where 32K are reserved for use by boot ROM and 6K for secure
boto header.
- Error messages during SPL boot are limited to error code numbers
instead of strings to reduce the size of SPL image.
Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/spl.c | 18 | ||||
-rw-r--r-- | arch/arm/include/asm/fsl_secure_boot.h | 9 |
2 files changed, 25 insertions, 2 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 73a8680..dfacf98 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -41,6 +41,24 @@ u32 spl_boot_mode(const u32 boot_device) } #ifdef CONFIG_SPL_BUILD + +void spl_board_init(void) +{ +#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_LSCH2) + /* + * In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif +} + void board_init_f(ulong dummy) { /* Clear global data */ diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 558dc62..1ca5f42 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -27,10 +27,11 @@ #define CONFIG_SPL_UBOOT_KEY_HASH NULL #endif /* ifdef CONFIG_SPL_BUILD */ +#define CONFIG_KEY_REVOCATION + #ifndef CONFIG_SPL_BUILD #define CONFIG_CMD_BLOB #define CONFIG_CMD_HASH -#define CONFIG_KEY_REVOCATION #ifndef CONFIG_SYS_RAMBOOT /* The key used for verification of next level images * is picked up from an Extension Table which has @@ -87,7 +88,11 @@ /* For SD boot address and size are assigned in terms of sector * offset and no. of sectors respectively. */ -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 +#if defined(CONFIG_LS1043A) +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000920 +#else +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 +#endif #define CONFIG_BS_ADDR_DEVICE 0x00000940 #define CONFIG_BS_HDR_SIZE 0x00000010 #define CONFIG_BS_SIZE 0x00000008 |