diff options
author | Tom Rini <trini@konsulko.com> | 2017-03-14 15:08:10 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-04-05 17:52:01 (GMT) |
commit | ea3310e8aafad1da72d9a5e60568d725cbdefdbd (patch) | |
tree | 869faa824f09ce4d40f2ce503a607ceb28b5ce91 /arch/blackfin/include/asm/mach-common/bits/pata.h | |
parent | c3b7cfe15ec1db047182d4ec55a3ce05f19bdf38 (diff) | |
download | u-boot-ea3310e8aafad1da72d9a5e60568d725cbdefdbd.tar.xz |
Blackfin: Remove
The architecture is currently unmaintained, remove.
Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/blackfin/include/asm/mach-common/bits/pata.h')
-rw-r--r-- | arch/blackfin/include/asm/mach-common/bits/pata.h | 220 |
1 files changed, 0 insertions, 220 deletions
diff --git a/arch/blackfin/include/asm/mach-common/bits/pata.h b/arch/blackfin/include/asm/mach-common/bits/pata.h deleted file mode 100644 index 9b61824..0000000 --- a/arch/blackfin/include/asm/mach-common/bits/pata.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * ATAPI Masks - */ - -#ifndef __BFIN_PERIPHERAL_PATA__ -#define __BFIN_PERIPHERAL_PATA__ - -/* Bit masks for ATAPI_CONTROL */ -#define PIO_START 0x1 /* Start PIO/Reg Op */ -#define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define XFER_DIR 0x8 /* Transfer Direction */ -#define IORDY_EN 0x10 /* IORDY Enable */ -#define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define SOFT_RST 0x40 /* Soft Reset */ -#define DEV_RST 0x80 /* Device Reset */ -#define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define END_ON_TERM 0x200 /* End/Terminate Select */ -#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ - -/* Bit masks for ATAPI_STATUS */ -#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ - -/* Bit masks for ATAPI_DEV_ADDR */ -#define DEV_ADDR 0x1f /* Device Address */ - -/* Bit masks for ATAPI_INT_MASK */ -#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ - -/* Bit masks for ATAPI_INT_STATUS */ -#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ - -/* Bit masks for ATAPI_LINE_STATUS */ -#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define ATAPI_ADDR 0x70 /* ATAPI address line status */ -#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_SM_STATE */ -#define PIO_CSTATE 0xf /* PIO mode state machine current state */ -#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ -#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ -#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_TERMINATE */ -#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ - -/* Bit masks for ATAPI_REG_TIM_0 */ -#define T2_REG 0xff /* End of cycle time for register access transfers */ -#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ - -/* Bit masks for ATAPI_PIO_TIM_0 */ -#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ -#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ -#define T4_REG 0xf000 /* DIOW data hold */ - -/* Bit masks for ATAPI_PIO_TIM_1 */ -#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ - -/* Bit masks for ATAPI_MULTI_TIM_0 */ -#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ -#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ - -/* Bit masks for ATAPI_MULTI_TIM_1 */ -#define TKW 0xff /* Selects DIOW negated pulsewidth */ -#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ - -/* Bit masks for ATAPI_MULTI_TIM_2 */ -#define TH 0xff /* Selects DIOW data hold */ -#define TEOC 0xff00 /* Selects end of cycle for DMA */ - -/* Bit masks for ATAPI_ULTRA_TIM_0 */ -#define TACK 0xff /* Selects setup and hold times for TACK */ -#define TENV 0xff00 /* Selects envelope time */ - -/* Bit masks for ATAPI_ULTRA_TIM_1 */ -#define TDVS 0xff /* Selects data valid setup time */ -#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ - -/* Bit masks for ATAPI_ULTRA_TIM_2 */ -#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ -#define TMLI 0xff00 /* Selects interlock time */ - -/* Bit masks for ATAPI_ULTRA_TIM_3 */ -#define TZAH 0xff /* Selects minimum delay required for output */ -#define READY_PAUSE 0xff00 /* Selects ready to pause */ - -/* Bit masks for ATAPI_CONTROL */ -#define PIO_START 0x1 /* Start PIO/Reg Op */ -#define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define XFER_DIR 0x8 /* Transfer Direction */ -#define IORDY_EN 0x10 /* IORDY Enable */ -#define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define SOFT_RST 0x40 /* Soft Reset */ -#define DEV_RST 0x80 /* Device Reset */ -#define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define END_ON_TERM 0x200 /* End/Terminate Select */ -#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ - -/* Bit masks for ATAPI_STATUS */ -#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ - -/* Bit masks for ATAPI_DEV_ADDR */ -#define DEV_ADDR 0x1f /* Device Address */ - -/* Bit masks for ATAPI_INT_MASK */ -#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ - -/* Bit masks for ATAPI_INT_STATUS */ -#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ - -/* Bit masks for ATAPI_LINE_STATUS */ -#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define ATAPI_ADDR 0x70 /* ATAPI address line status */ -#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_SM_STATE */ -#define PIO_CSTATE 0xf /* PIO mode state machine current state */ -#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ -#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ -#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_TERMINATE */ -#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ - -/* Bit masks for ATAPI_REG_TIM_0 */ -#define T2_REG 0xff /* End of cycle time for register access transfers */ -#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ - -/* Bit masks for ATAPI_PIO_TIM_0 */ -#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ -#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ -#define T4_REG 0xf000 /* DIOW data hold */ - -/* Bit masks for ATAPI_PIO_TIM_1 */ -#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ - -/* Bit masks for ATAPI_MULTI_TIM_0 */ -#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ -#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ - -/* Bit masks for ATAPI_MULTI_TIM_1 */ -#define TKW 0xff /* Selects DIOW negated pulsewidth */ -#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ - -/* Bit masks for ATAPI_MULTI_TIM_2 */ -#define TH 0xff /* Selects DIOW data hold */ -#define TEOC 0xff00 /* Selects end of cycle for DMA */ - -/* Bit masks for ATAPI_ULTRA_TIM_0 */ -#define TACK 0xff /* Selects setup and hold times for TACK */ -#define TENV 0xff00 /* Selects envelope time */ - -/* Bit masks for ATAPI_ULTRA_TIM_1 */ -#define TDVS 0xff /* Selects data valid setup time */ -#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ - -/* Bit masks for ATAPI_ULTRA_TIM_2 */ -#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ -#define TMLI 0xff00 /* Selects interlock time */ - -/* Bit masks for ATAPI_ULTRA_TIM_3 */ -#define TZAH 0xff /* Selects minimum delay required for output */ -#define READY_PAUSE 0xff00 /* Selects ready to pause */ - -#endif /* __BFIN_PERIPHERAL_PATA__ */ |