diff options
author | Poonam Aggrwal <poonam.aggrwal@freescale.com> | 2011-01-13 16:09:27 (GMT) |
---|---|---|
committer | Kumar Gala <galak@kernel.crashing.org> | 2011-01-20 04:58:23 (GMT) |
commit | b8cdd014629133c554b81df0447c748d10960583 (patch) | |
tree | 73d2067d2a1438bee34417004fd891686d877b57 /arch/powerpc/cpu | |
parent | 17028be23887ea6d467e63e115c49b516ae58746 (diff) | |
download | u-boot-b8cdd014629133c554b81df0447c748d10960583.tar.xz |
powerpc/85xx: Add Support for Freescale P1010 Processor
Key Features include of the P1010:
* e500v2 core frequency operation of 500 to 800 MHz
* Power consumption less than 5.0 W at 800 MHz core speed
* Dual SATA 3 Gbps controllers with integrated PHY
* Dual PCI Express controllers
* Three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers (eTSECs)
* TCP/IP acceleration and classification capabilities
* IEEE 1588 support
* Lossless flow control
* RGMII, SGMII
* DDR3 with support for a 32-bit data interface (40 bits including ECC),
up to 800 MHz data rate 32/16-bit DDR3 memory controller
* Dedicated security engine featuring trusted boot
* TDM interface
* Dual controller area networks (FlexCAN) controller
* SD/MMC card controller supporting booting from Flash cards
* USB 2.0 host and device controller with an on-chip, high-speed PHY
* Integrated Flash controller (IFC)
* Power Management Controller (PMC)
* Four-channel, general-purpose DMA controller
* I2C controller
* Serial peripheral interface (SPI) controller with master and slave support
* System timers including a periodic interrupt timer, real-time clock,
software watchdog timer, and four general-purpose timers
* Dual DUARTs
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/cpu')
-rw-r--r-- | arch/powerpc/cpu/mpc85xx/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xxx/cpu.c | 4 |
2 files changed, 4 insertions, 1 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index af7bc09..e1261cf 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -50,6 +50,7 @@ COBJS-$(CONFIG_MPC8544) += ddr-gen2.o COBJS-$(CONFIG_MPC8572) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += ddr-gen3.o COBJS-$(CONFIG_MPC8569) += ddr-gen3.o +COBJS-$(CONFIG_P1010) += ddr-gen3.o COBJS-$(CONFIG_P1011) += ddr-gen3.o COBJS-$(CONFIG_P1012) += ddr-gen3.o COBJS-$(CONFIG_P1013) += ddr-gen3.o diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 5b30fbd..d1aa9e7 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains @@ -64,6 +64,8 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(8569, 8569_E, 1), CPU_TYPE_ENTRY(8572, 8572, 2), CPU_TYPE_ENTRY(8572, 8572_E, 2), + CPU_TYPE_ENTRY(P1010, P1010, 1), + CPU_TYPE_ENTRY(P1010, P1010_E, 1), CPU_TYPE_ENTRY(P1011, P1011, 1), CPU_TYPE_ENTRY(P1011, P1011_E, 1), CPU_TYPE_ENTRY(P1012, P1012, 1), |