diff options
author | Prabhakar Kushwaha <prabhakar@freescale.com> | 2013-01-23 17:59:57 (GMT) |
---|---|---|
committer | Andy Fleming <afleming@freescale.com> | 2013-01-30 17:25:14 (GMT) |
commit | 35fe948e3b62789182610f57d48f97dbd5403aa8 (patch) | |
tree | 3496bd91e68bcb811fb7ef2db4e97d5bdc0849d1 /arch/powerpc/include | |
parent | e8ba6c503ffea6bcb7abba3638cc3f880d060504 (diff) | |
download | u-boot-35fe948e3b62789182610f57d48f97dbd5403aa8.tar.xz |
powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
The BSC9132 is a highly integrated device that targets the evolving
Microcell, Picocell, and Enterprise-Femto base station market subsegments.
The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
core technologies with MAPLE-B2P baseband acceleration processing elements
to address the need for a high performance, low cost, integrated solution
that handles all required processing layers without the need for an
external device except for an RF transceiver or, in a Micro base station
configuration, a host device that handles the L3/L4 and handover between
sectors.
The BSC9132 SoC includes the following function and features:
- Power Architecture subsystem including two e500 processors with
512-Kbyte shared L2 cache
- Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
cache
- 32 Kbyte of shared M3 memory
- The Multi Accelerator Platform Engine for Pico BaseStation Baseband
Processing (MAPLE-B2P)
- Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
ECC), up to 1333 MHz data rate
- Dedicated security engine featuring trusted boot
- Two DMA controllers
- OCNDMA with four bidirectional channels
- SysDMA with sixteen bidirectional channels
- Interfaces
- Four-lane SerDes PHY
- PCI Express controller complies with the PEX Specification-Rev 2.0
- Two Common Public Radio Interface (CPRI) controller lanes
- High-speed USB 2.0 host and device controller with ULPI interface
- Enhanced secure digital (SD/MMC) host controller (eSDHC)
- Antenna interface controller (AIC), supporting four industry
standard JESD207/four custom ADI RF interfaces
- ADI lanes support both full duplex FDD support & half duplex TDD
- Universal Subscriber Identity Module (USIM) interface that
facilitates communication to SIM cards or Eurochip pre-paid phone
cards
- Two DUART, two eSPI, and two I2C controllers
- Integrated Flash memory controller (IFC)
- GPIO
- Sixteen 32-bit timers
Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'arch/powerpc/include')
-rw-r--r-- | arch/powerpc/include/asm/config_mpc85xx.h | 15 | ||||
-rw-r--r-- | arch/powerpc/include/asm/immap_85xx.h | 25 | ||||
-rw-r--r-- | arch/powerpc/include/asm/processor.h | 2 |
3 files changed, 40 insertions, 2 deletions
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index f957fa3..7943fa4 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -493,6 +493,21 @@ #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#elif defined(CONFIG_BSC9132) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" + #elif defined(CONFIG_PPC_T4240) #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 6a818c4..67b1a44 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2150,7 +2150,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 #else -#ifdef CONFIG_BSC9131 +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 #else #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00 @@ -2164,6 +2164,11 @@ typedef struct ccsr_gur { u32 porbmsr; /* POR boot mode status */ #define MPC85xx_PORBMSR_HA 0x00070000 #define MPC85xx_PORBMSR_HA_SHIFT 16 +#define MPC85XX_PORBMSR_ROMLOC_SHIFT 24 +#define PORBMSR_ROMLOC_SPI 0x6 +#define PORBMSR_ROMLOC_SDHC 0x7 +#define PORBMSR_ROMLOC_NAND_2K 0x9 +#define PORBMSR_ROMLOC_NOR 0xf u32 porimpscr; /* POR I/O impedance status & control */ u32 pordevsr; /* POR I/O device status regsiter */ #if defined(CONFIG_P1017) || defined(CONFIG_P1023) @@ -2188,6 +2193,9 @@ typedef struct ccsr_gur { #if defined(CONFIG_P1010) #define MPC85xx_PORDEVSR_IO_SEL 0x00600000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 +#elif defined(CONFIG_BSC9132) +#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2345,6 +2353,10 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen 0x00000002 #define MPC85xx_PMUXCR_SPI1_CS3_GPO76 0x00000003 #endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 +#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2375,6 +2387,7 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f8000 #define MPC85xx_PMUXCR2_USB 0x00150000 #endif +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000 #define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS 0X80000000 @@ -2418,8 +2431,9 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ANT3_AGC_GPO53 0x00000004 #define MPC85xx_PMUXCR2_ANT3_DO_TDM 0x00000001 #define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49 0x00000002 +#endif u32 pmuxcr3; - +#if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM 0x40000000 #define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51 0x80000000 #define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B 0x10000000 @@ -2434,6 +2448,13 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR3_SPI2_CS3_GPO94 0x00040000 #define MPC85xx_PMUXCR3_ANT2_AGC_RSVD 0x00010000 #define MPC85xx_PMUXCR3_ANT2_GPO89 0x00030000 +#endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR3_USB_SEL_MASK 0x0000ff00 +#define MPC85xx_PMUXCR3_UART2_SEL 0x00005000 +#define MPC85xx_PMUXCR3_UART3_SEL_MASK 0xc0000000 +#define MPC85xx_PMUXCR3_UART3_SEL 0x40000000 +#endif u32 pmuxcr4; #else u8 res6[8]; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 19fe250..8c91f08 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1113,6 +1113,8 @@ #define SVR_9130 0x860001 #define SVR_9131 0x860000 +#define SVR_9132 0x861000 +#define SVR_9232 0x861400 #define SVR_Unknown 0xFFFFFF |