diff options
author | Bin Meng <bmeng.cn@gmail.com> | 2016-05-07 14:46:14 (GMT) |
---|---|---|
committer | Bin Meng <bmeng.cn@gmail.com> | 2016-05-23 07:18:00 (GMT) |
commit | d4e61f505b8fd8662142b6e27ef443f88f73176e (patch) | |
tree | e5c397e785e36bf031e20aa6e1cdf967bacd00d0 /arch/x86 | |
parent | 07ac84eaaa5daeae4a56ff70649a3e50fc470db5 (diff) | |
download | u-boot-d4e61f505b8fd8662142b6e27ef443f88f73176e.tar.xz |
x86: irq: Enable SCI on IRQ9
By default SCI is disabled after power on. ACTL is the register to
enable SCI and route it to PIC/APIC. To support both ACPI in PIC
mode and APIC mode, configure SCI to use IRQ9.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'arch/x86')
-rw-r--r-- | arch/x86/cpu/irq.c | 22 | ||||
-rw-r--r-- | arch/x86/include/asm/irq.h | 4 |
2 files changed, 26 insertions, 0 deletions
diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c index 7586fc2..86183b0 100644 --- a/arch/x86/cpu/irq.c +++ b/arch/x86/cpu/irq.c @@ -147,6 +147,9 @@ static int create_pirq_routing_table(struct udevice *dev) priv->ibase &= ~0xf; } + priv->actl_8bit = fdtdec_get_bool(blob, node, "intel,actl-8bit"); + priv->actl_addr = fdtdec_get_int(blob, node, "intel,actl-addr", 0); + cell = fdt_getprop(blob, node, "intel,pirq-routing", &len); if (!cell || len % sizeof(struct pirq_routing)) return -EINVAL; @@ -216,6 +219,22 @@ static int create_pirq_routing_table(struct udevice *dev) return 0; } +static void irq_enable_sci(struct udevice *dev) +{ + struct irq_router *priv = dev_get_priv(dev); + + if (priv->actl_8bit) { + /* Bit7 must be turned on to enable ACPI */ + dm_pci_write_config8(dev->parent, priv->actl_addr, 0x80); + } else { + /* Write 0 to enable SCI on IRQ9 */ + if (priv->config == PIRQ_VIA_PCI) + dm_pci_write_config32(dev->parent, priv->actl_addr, 0); + else + writel(0, priv->ibase + priv->actl_addr); + } +} + int irq_router_common_init(struct udevice *dev) { int ret; @@ -229,6 +248,9 @@ int irq_router_common_init(struct udevice *dev) pirq_route_irqs(dev, pirq_routing_table->slots, get_irq_slot_count(pirq_routing_table)); + if (IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE)) + irq_enable_sci(dev); + return 0; } diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index 5b9e673..ddb529e 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -34,6 +34,8 @@ enum pirq_config { * IRQ N is available to be routed * @lb_bdf: irq router's PCI bus/device/function number encoding * @ibase: IBASE register block base address + * @actl_8bit: ACTL register width is 8-bit (for ICH series chipset) + * @actl_addr: ACTL register offset */ struct irq_router { int config; @@ -41,6 +43,8 @@ struct irq_router { u16 irq_mask; u32 bdf; u32 ibase; + bool actl_8bit; + int actl_addr; }; struct pirq_routing { |