Merge branch 'master' of git://git.denx.de/u-boot-arm

283 files changed, 13119 insertions, 2586 deletions

diff --git a/arch/arc/config.mk b/arch/arc/config.mk
new file mode 100644
index 0000000..76f4f7c
--- /dev/null
+++ b/arch/arc/config.mk
@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifndef CONFIG_SYS_BIG_ENDIAN
+CONFIG_SYS_LITTLE_ENDIAN = 1
+endif
+
+ifdef CONFIG_SYS_LITTLE_ENDIAN
+CROSS_COMPILE ?= arc-buildroot-linux-uclibc-
+endif
+
+ifdef CONFIG_SYS_BIG_ENDIAN
+CROSS_COMPILE ?= arceb-buildroot-linux-uclibc-
+PLATFORM_LDFLAGS += -EB
+endif
+
+PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -DCONFIG_ARC -gdwarf-2
+
+LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
+
+# Needed for relocation
+LDFLAGS_FINAL += -pie
+
+# Load address for standalone apps
+CONFIG_STANDALONE_LOAD_ADDR ?= 0x82000000
+
+# Support generic board on ARC
+__HAVE_ARCH_GENERIC_BOARD := y
diff --git a/arch/arc/cpu/arc700/Makefile b/arch/arc/cpu/arc700/Makefile
new file mode 100644
index 0000000..cdc5002
--- /dev/null
+++ b/arch/arc/cpu/arc700/Makefile
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+extra-y	+= start.o
+
+obj-y	+= cache.o
+obj-y	+= cpu.o
+obj-y	+= interrupts.o
+obj-y	+= reset.o
+obj-y	+= timer.o
diff --git a/arch/arc/cpu/arc700/cache.c b/arch/arc/cpu/arc700/cache.c
new file mode 100644
index 0000000..39d522d
--- /dev/null
+++ b/arch/arc/cpu/arc700/cache.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/arcregs.h>
+
+/* Bit values in IC_CTRL */
+#define IC_CTRL_CACHE_DISABLE	(1 << 0)
+
+/* Bit values in DC_CTRL */
+#define DC_CTRL_CACHE_DISABLE	(1 << 0)
+#define DC_CTRL_INV_MODE_FLUSH	(1 << 6)
+#define DC_CTRL_FLUSH_STATUS	(1 << 8)
+
+int icache_status(void)
+{
+	return (read_aux_reg(ARC_AUX_IC_CTRL) & IC_CTRL_CACHE_DISABLE) !=
+	       IC_CTRL_CACHE_DISABLE;
+}
+
+void icache_enable(void)
+{
+	write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) &
+		      ~IC_CTRL_CACHE_DISABLE);
+}
+
+void icache_disable(void)
+{
+	write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) |
+		      IC_CTRL_CACHE_DISABLE);
+}
+
+void invalidate_icache_all(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+	/* Any write to IC_IVIC register triggers invalidation of entire I$ */
+	write_aux_reg(ARC_AUX_IC_IVIC, 1);
+#endif /* CONFIG_SYS_ICACHE_OFF */
+}
+
+int dcache_status(void)
+{
+	return (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_CACHE_DISABLE) !=
+		DC_CTRL_CACHE_DISABLE;
+}
+
+void dcache_enable(void)
+{
+	write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) &
+		      ~(DC_CTRL_INV_MODE_FLUSH | DC_CTRL_CACHE_DISABLE));
+}
+
+void dcache_disable(void)
+{
+	write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) |
+		      DC_CTRL_CACHE_DISABLE);
+}
+
+void flush_dcache_all(void)
+{
+	/* Do flush of entire cache */
+	write_aux_reg(ARC_AUX_DC_FLSH, 1);
+
+	/* Wait flush end */
+	while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS)
+		;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+static void dcache_flush_line(unsigned addr)
+{
+#if (CONFIG_ARC_MMU_VER > 2)
+	write_aux_reg(ARC_AUX_DC_PTAG, addr);
+#endif
+	write_aux_reg(ARC_AUX_DC_FLDL, addr);
+
+	/* Wait flush end */
+	while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS)
+		;
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+	/*
+	 * Invalidate I$ for addresses range just flushed from D$.
+	 * If we try to execute data flushed above it will be valid/correct
+	 */
+#if (CONFIG_ARC_MMU_VER > 2)
+	write_aux_reg(ARC_AUX_IC_PTAG, addr);
+#endif
+	write_aux_reg(ARC_AUX_IC_IVIL, addr);
+#endif /* CONFIG_SYS_ICACHE_OFF */
+}
+#endif /* CONFIG_SYS_DCACHE_OFF */
+
+void flush_dcache_range(unsigned long start, unsigned long end)
+{
+#ifndef CONFIG_SYS_DCACHE_OFF
+	unsigned int addr;
+
+	start = start & (~(CONFIG_SYS_CACHELINE_SIZE - 1));
+	end = end & (~(CONFIG_SYS_CACHELINE_SIZE - 1));
+
+	for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE)
+		dcache_flush_line(addr);
+#endif /* CONFIG_SYS_DCACHE_OFF */
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long end)
+{
+#ifndef CONFIG_SYS_DCACHE_OFF
+	unsigned int addr;
+
+	start = start & (~(CONFIG_SYS_CACHELINE_SIZE - 1));
+	end = end & (~(CONFIG_SYS_CACHELINE_SIZE - 1));
+
+	for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) {
+#if (CONFIG_ARC_MMU_VER > 2)
+		write_aux_reg(ARC_AUX_DC_PTAG, addr);
+#endif
+		write_aux_reg(ARC_AUX_DC_IVDL, addr);
+	}
+#endif /* CONFIG_SYS_DCACHE_OFF */
+}
+
+void invalidate_dcache_all(void)
+{
+#ifndef CONFIG_SYS_DCACHE_OFF
+	/* Write 1 to DC_IVDC register triggers invalidation of entire D$ */
+	write_aux_reg(ARC_AUX_DC_IVDC, 1);
+#endif /* CONFIG_SYS_DCACHE_OFF */
+}
+
+void flush_cache(unsigned long start, unsigned long size)
+{
+	flush_dcache_range(start, start + size);
+}
diff --git a/arch/arc/cpu/arc700/config.mk b/arch/arc/cpu/arc700/config.mk
new file mode 100644
index 0000000..3206ff4
--- /dev/null
+++ b/arch/arc/cpu/arc700/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -mA7
diff --git a/arch/arc/cpu/arc700/cpu.c b/arch/arc/cpu/arc700/cpu.c
new file mode 100644
index 0000000..50634b8
--- /dev/null
+++ b/arch/arc/cpu/arc700/cpu.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arcregs.h>
+#include <asm/cache.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int arch_cpu_init(void)
+{
+#ifdef CONFIG_SYS_ICACHE_OFF
+	icache_disable();
+#else
+	icache_enable();
+	invalidate_icache_all();
+#endif
+
+	flush_dcache_all();
+#ifdef CONFIG_SYS_DCACHE_OFF
+	dcache_disable();
+#else
+	dcache_enable();
+#endif
+	timer_init();
+
+/* In simulation (ISS) "CHIPID" and "ARCNUM" are all "ff" */
+	if ((read_aux_reg(ARC_AUX_IDENTITY) & 0xffffff00) == 0xffffff00)
+		gd->arch.running_on_hw = 0;
+	else
+		gd->arch.running_on_hw = 1;
+
+	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+int arch_early_init_r(void)
+{
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	return 0;
+}
diff --git a/arch/arc/cpu/arc700/interrupts.c b/arch/arc/cpu/arc700/interrupts.c
new file mode 100644
index 0000000..d93a6eb
--- /dev/null
+++ b/arch/arc/cpu/arc700/interrupts.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arcregs.h>
+#include <asm/ptrace.h>
+
+/* Bit values in STATUS32 */
+#define E1_MASK		(1 << 1)	/* Level 1 interrupts enable */
+#define E2_MASK		(1 << 2)	/* Level 2 interrupts enable */
+
+int interrupt_init(void)
+{
+	return 0;
+}
+
+/*
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts(void)
+{
+	int status = read_aux_reg(ARC_AUX_STATUS32);
+	int state = (status | E1_MASK | E2_MASK) ? 1 : 0;
+
+	status &= ~(E1_MASK | E2_MASK);
+	/* STATUS32 register is updated indirectly with "FLAG" instruction */
+	__asm__("flag %0" : : "r" (status));
+	return state;
+}
+
+void enable_interrupts(void)
+{
+	unsigned int status = read_aux_reg(ARC_AUX_STATUS32);
+
+	status |= E1_MASK | E2_MASK;
+	/* STATUS32 register is updated indirectly with "FLAG" instruction */
+	__asm__("flag %0" : : "r" (status));
+}
+
+static void print_reg_file(long *reg_rev, int start_num)
+{
+	unsigned int i;
+
+	/* Print 3 registers per line */
+	for (i = start_num; i < start_num + 25; i++) {
+		printf("r%02u: 0x%08lx\t", i, (unsigned long)*reg_rev);
+		if (((i + 1) % 3) == 0)
+			printf("\n");
+
+		/* Because pt_regs has registers reversed */
+		reg_rev--;
+	}
+
+	/* Add new-line if none was inserted in the end of loop above */
+	if (((i + 1) % 3) != 0)
+		printf("\n");
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	printf("RET:\t0x%08lx\nBLINK:\t0x%08lx\nSTAT32:\t0x%08lx\n",
+	       regs->ret, regs->blink, regs->status32);
+	printf("GP: 0x%08lx\t r25: 0x%08lx\t\n", regs->r26, regs->r25);
+	printf("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n", regs->bta,
+	       regs->sp, regs->fp);
+	printf("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n", regs->lp_start,
+	       regs->lp_end, regs->lp_count);
+
+	print_reg_file(&(regs->r0), 0);
+}
+
+void bad_mode(struct pt_regs *regs)
+{
+	if (regs)
+		show_regs(regs);
+
+	panic("Resetting CPU ...\n");
+}
+
+void do_memory_error(unsigned long address, struct pt_regs *regs)
+{
+	printf("Memory error exception @ 0x%lx\n", address);
+	bad_mode(regs);
+}
+
+void do_instruction_error(unsigned long address, struct pt_regs *regs)
+{
+	printf("Instruction error exception @ 0x%lx\n", address);
+	bad_mode(regs);
+}
+
+void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
+{
+	printf("Machine check exception @ 0x%lx\n", address);
+	bad_mode(regs);
+}
+
+void do_interrupt_handler(void)
+{
+	printf("Interrupt fired\n");
+	bad_mode(0);
+}
+
+void do_itlb_miss(struct pt_regs *regs)
+{
+	printf("I TLB miss exception\n");
+	bad_mode(regs);
+}
+
+void do_dtlb_miss(struct pt_regs *regs)
+{
+	printf("D TLB miss exception\n");
+	bad_mode(regs);
+}
+
+void do_tlb_prot_violation(unsigned long address, struct pt_regs *regs)
+{
+	printf("TLB protection violation or misaligned access @ 0x%lx\n",
+	       address);
+	bad_mode(regs);
+}
+
+void do_privilege_violation(struct pt_regs *regs)
+{
+	printf("Privilege violation exception\n");
+	bad_mode(regs);
+}
+
+void do_trap(struct pt_regs *regs)
+{
+	printf("Trap exception\n");
+	bad_mode(regs);
+}
+
+void do_extension(struct pt_regs *regs)
+{
+	printf("Extension instruction exception\n");
+	bad_mode(regs);
+}
diff --git a/arch/arc/cpu/arc700/reset.c b/arch/arc/cpu/arc700/reset.c
new file mode 100644
index 0000000..98ebf1d
--- /dev/null
+++ b/arch/arc/cpu/arc700/reset.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <command.h>
+#include <common.h>
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	printf("Put your restart handler here\n");
+
+#ifdef DEBUG
+	/* Stop debug session here */
+	__asm__("brk");
+#endif
+	return 0;
+}
diff --git a/arch/arc/cpu/arc700/start.S b/arch/arc/cpu/arc700/start.S
new file mode 100644
index 0000000..563513b
--- /dev/null
+++ b/arch/arc/cpu/arc700/start.S
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/arcregs.h>
+
+/*
+ * Note on the LD/ST addressing modes with address register write-back
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a    reg1, [reg2, x]  => Pre Incr
+ *      Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab   reg1, [reg2, x]  => Post Incr
+ *      Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+	st.a	\reg, [%sp, -4]
+.endm
+
+.macro PUSHAX aux
+	lr	%r9, [\aux]
+	PUSH	%r9
+.endm
+
+.macro  SAVE_R1_TO_R24
+	PUSH	%r1
+	PUSH	%r2
+	PUSH	%r3
+	PUSH	%r4
+	PUSH	%r5
+	PUSH	%r6
+	PUSH	%r7
+	PUSH	%r8
+	PUSH	%r9
+	PUSH	%r10
+	PUSH	%r11
+	PUSH	%r12
+	PUSH	%r13
+	PUSH	%r14
+	PUSH	%r15
+	PUSH	%r16
+	PUSH	%r17
+	PUSH	%r18
+	PUSH	%r19
+	PUSH	%r20
+	PUSH	%r21
+	PUSH	%r22
+	PUSH	%r23
+	PUSH	%r24
+.endm
+
+.macro SAVE_ALL_SYS
+
+	st	%r0, [%sp]
+	lr	%r0, [%ecr]
+	st	%r0, [%sp, 8]	/* ECR */
+	st	%sp, [%sp, 4]
+
+	SAVE_R1_TO_R24
+	PUSH	%r25
+	PUSH	%gp
+	PUSH	%fp
+	PUSH	%blink
+	PUSHAX	%eret
+	PUSHAX	%erstatus
+	PUSH	%lp_count
+	PUSHAX	%lp_end
+	PUSHAX	%lp_start
+	PUSHAX	%erbta
+.endm
+
+.align 4
+.globl _start
+_start:
+	/* Critical system events */
+	j	reset			/* 0 - 0x000 */
+	j	memory_error		/* 1 - 0x008 */
+	j	instruction_error	/* 2 - 0x010 */
+
+	/* Device interrupts */
+.rept	29
+	j	interrupt_handler	/* 3:31 - 0x018:0xF8 */
+.endr
+	/* Exceptions */
+	j	EV_MachineCheck		/* 0x100, Fatal Machine check  (0x20) */
+	j	EV_TLBMissI		/* 0x108, Intruction TLB miss  (0x21) */
+	j	EV_TLBMissD		/* 0x110, Data TLB miss        (0x22) */
+	j	EV_TLBProtV		/* 0x118, Protection Violation (0x23)
+							or Misaligned Access  */
+	j	EV_PrivilegeV		/* 0x120, Privilege Violation  (0x24) */
+	j	EV_Trap			/* 0x128, Trap exception       (0x25) */
+	j	EV_Extension		/* 0x130, Extn Intruction Excp (0x26) */
+
+memory_error:
+	SAVE_ALL_SYS
+	lr	%r0, [%efa]
+	mov	%r1, %sp
+	j	do_memory_error
+
+instruction_error:
+	SAVE_ALL_SYS
+	lr	%r0, [%efa]
+	mov	%r1, %sp
+	j	do_instruction_error
+
+interrupt_handler:
+	/* Todo - save and restore CPU context when interrupts will be in use */
+	bl	do_interrupt_handler
+	rtie
+
+EV_MachineCheck:
+	SAVE_ALL_SYS
+	lr	%r0, [%efa]
+	mov	%r1, %sp
+	j	do_machine_check_fault
+
+EV_TLBMissI:
+	SAVE_ALL_SYS
+	mov	%r0, %sp
+	j	do_itlb_miss
+
+EV_TLBMissD:
+	SAVE_ALL_SYS
+	mov	%r0, %sp
+	j	do_dtlb_miss
+
+EV_TLBProtV:
+	SAVE_ALL_SYS
+	lr	%r0, [%efa]
+	mov	%r1, %sp
+	j	do_tlb_prot_violation
+
+EV_PrivilegeV:
+	SAVE_ALL_SYS
+	mov	%r0, %sp
+	j	do_privilege_violation
+
+EV_Trap:
+	SAVE_ALL_SYS
+	mov	%r0, %sp
+	j	do_trap
+
+EV_Extension:
+	SAVE_ALL_SYS
+	mov	%r0, %sp
+	j	do_extension
+
+
+reset:
+	/* Setup interrupt vector base that matches "__text_start" */
+	sr	__text_start, [ARC_AUX_INTR_VEC_BASE]
+
+	/* Setup stack pointer */
+	mov	%sp, CONFIG_SYS_INIT_SP_ADDR
+	mov	%fp, %sp
+
+	/* Clear bss */
+	mov	%r0, __bss_start
+	mov	%r1, __bss_end
+
+clear_bss:
+	st.ab	0, [%r0, 4]
+	brlt	%r0, %r1, clear_bss
+
+	/* Zero the one and only argument of "board_init_f" */
+	mov_s	%r0, 0
+	j	board_init_f
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r0 = start_addr_sp
+ * r1 = new__gd
+ * r2 = relocaddr
+ */
+.align 4
+.globl	relocate_code
+relocate_code:
+	/*
+	 * r0-r12 might be clobbered by C functions
+	 * so we use r13-r16 for storage here
+	 */
+	mov	%r13, %r0		/* save addr_sp */
+	mov	%r14, %r1		/* save addr of gd */
+	mov	%r15, %r2		/* save addr of destination */
+
+	mov	%r16, %r2		/* %r9 - relocation offset */
+	sub	%r16, %r16, __image_copy_start
+
+/* Set up the stack */
+stack_setup:
+	mov	%sp, %r13
+	mov	%fp, %sp
+
+/* Check if monitor is loaded right in place for relocation */
+	mov	%r0, __image_copy_start
+	cmp	%r0, %r15		/* skip relocation if code loaded */
+	bz	do_board_init_r		/* in target location already */
+
+/* Copy data (__image_copy_start - __image_copy_end) to new location */
+	mov	%r1, %r15
+	mov	%r2, __image_copy_end
+	sub	%r2, %r2, %r0		/* r3 <- amount of bytes to copy */
+	asr	%r2, %r2, 2		/* r3 <- amount of words to copy */
+	mov	%lp_count, %r2
+	lp	copy_end
+	ld.ab	%r2,[%r0,4]
+	st.ab	%r2,[%r1,4]
+copy_end:
+
+/* Fix relocations related issues */
+	bl	do_elf_reloc_fixups
+#ifndef CONFIG_SYS_ICACHE_OFF
+	bl	invalidate_icache_all
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+	bl	flush_dcache_all
+#endif
+
+/* Update position of intterupt vector table */
+	lr	%r0, [ARC_AUX_INTR_VEC_BASE]	/* Read current position */
+	add	%r0, %r0, %r16			/* Update address */
+	sr	%r0, [ARC_AUX_INTR_VEC_BASE]	/* Write new position */
+
+do_board_init_r:
+/* Prepare for exection of "board_init_r" in relocated monitor */
+	mov	%r2, board_init_r	/* old address of "board_init_r()" */
+	add	%r2, %r2, %r16		/* new address of "board_init_r()" */
+	mov	%r0, %r14		/* 1-st parameter: gd_t */
+	mov	%r1, %r15		/* 2-nd parameter: dest_addr */
+	j	[%r2]
diff --git a/arch/arc/cpu/arc700/timer.c b/arch/arc/cpu/arc700/timer.c
new file mode 100644
index 0000000..a0acbbc
--- /dev/null
+++ b/arch/arc/cpu/arc700/timer.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arcregs.h>
+
+#define NH_MODE	(1 << 1)	/* Disable timer if CPU is halted */
+
+int timer_init(void)
+{
+	write_aux_reg(ARC_AUX_TIMER0_CTRL, NH_MODE);
+	/* Set max value for counter/timer */
+	write_aux_reg(ARC_AUX_TIMER0_LIMIT, 0xffffffff);
+	/* Set initial count value and restart counter/timer */
+	write_aux_reg(ARC_AUX_TIMER0_CNT, 0);
+	return 0;
+}
+
+unsigned long timer_read_counter(void)
+{
+	return read_aux_reg(ARC_AUX_TIMER0_CNT);
+}
diff --git a/arch/arc/cpu/arc700/u-boot.lds b/arch/arc/cpu/arc700/u-boot.lds
new file mode 100644
index 0000000..2d01b21
--- /dev/null
+++ b/arch/arc/cpu/arc700/u-boot.lds
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-littlearc", "elf32-littlearc", "elf32-littlearc")
+OUTPUT_ARCH(arc)
+ENTRY(_start)
+SECTIONS
+{
+	. = ALIGN(4);
+	.text :	{
+		*(.__text_start)
+		*(.__image_copy_start)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.text_end :
+	{
+		*(.__text_end)
+	}
+
+	. = ALIGN(4);
+	.rodata : {
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	}
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+	.rel_dyn_start : {
+		*(.__rel_dyn_start)
+	}
+
+	.rela.dyn : {
+		*(.rela.dyn)
+	}
+
+	.rel_dyn_end : {
+		*(.__rel_dyn_end)
+	}
+
+	. = ALIGN(4);
+	.bss_start : {
+		*(.__bss_start);
+	}
+
+	.bss : {
+		*(.bss*)
+	}
+
+	.bss_end : {
+		*(.__bss_end);
+	}
+
+	. = ALIGN(4);
+	.image_copy_end : {
+		*(.__image_copy_end)
+		*(.__init_end)
+	}
+}
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
new file mode 100644
index 0000000..5d48d11
--- /dev/null
+++ b/arch/arc/include/asm/arcregs.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARC_ARCREGS_H
+#define _ASM_ARC_ARCREGS_H
+
+/*
+ * ARC architecture has additional address space - auxiliary registers.
+ * These registers are mostly used for configuration purposes.
+ * These registers are not memory mapped and special commands are used for
+ * access: "lr"/"sr".
+ */
+
+#define ARC_AUX_IDENTITY	0x04
+#define ARC_AUX_STATUS32	0x0a
+
+/* Instruction cache related auxiliary registers */
+#define ARC_AUX_IC_IVIC		0x10
+#define ARC_AUX_IC_CTRL		0x11
+#define ARC_AUX_IC_IVIL		0x19
+#if (CONFIG_ARC_MMU_VER > 2)
+#define ARC_AUX_IC_PTAG		0x1E
+#endif
+
+/* Timer related auxiliary registers */
+#define ARC_AUX_TIMER0_CNT	0x21	/* Timer 0 count */
+#define ARC_AUX_TIMER0_CTRL	0x22	/* Timer 0 control */
+#define ARC_AUX_TIMER0_LIMIT	0x23	/* Timer 0 limit */
+
+#define ARC_AUX_INTR_VEC_BASE	0x25
+
+/* Data cache related auxiliary registers */
+#define ARC_AUX_DC_IVDC		0x47
+#define ARC_AUX_DC_CTRL		0x48
+
+#define ARC_AUX_DC_IVDL		0x4A
+#define ARC_AUX_DC_FLSH		0x4B
+#define ARC_AUX_DC_FLDL		0x4C
+#if (CONFIG_ARC_MMU_VER > 2)
+#define ARC_AUX_DC_PTAG		0x5C
+#endif
+
+#ifndef __ASSEMBLY__
+/* Accessors for auxiliary registers */
+#define read_aux_reg(reg)	__builtin_arc_lr(reg)
+
+/* gcc builtin sr needs reg param to be long immediate */
+#define write_aux_reg(reg_immed, val)		\
+		__builtin_arc_sr((unsigned int)val, reg_immed)
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARC_ARCREGS_H */
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
new file mode 100644
index 0000000..85721aa
--- /dev/null
+++ b/arch/arc/include/asm/bitops.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_BITOPS_H
+#define __ASM_ARC_BITOPS_H
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __ASM_ARC_BITOPS_H */
diff --git a/arch/arc/include/asm/byteorder.h b/arch/arc/include/asm/byteorder.h
new file mode 100644
index 0000000..2fa9776
--- /dev/null
+++ b/arch/arc/include/asm/byteorder.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_BYTEORDER_H
+#define __ASM_ARC_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+	#define __BYTEORDER_HAS_U64__
+	#define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __LITTLE_ENDIAN__
+	#include <linux/byteorder/little_endian.h>
+#else
+	#include <linux/byteorder/big_endian.h>
+#endif	/* CONFIG_SYS_BIG_ENDIAN */
+
+#endif	/* ASM_ARC_BYTEORDER_H */
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
new file mode 100644
index 0000000..16e7568
--- /dev/null
+++ b/arch/arc/include/asm/cache.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_CACHE_H
+#define __ASM_ARC_CACHE_H
+
+#include <config.h>
+
+/*
+ * The current upper bound for ARC L1 data cache line sizes is 128 bytes.
+ * We use that value for aligning DMA buffers unless the board config has
+ * specified an alternate cache line size.
+ */
+#ifdef CONFIG_SYS_CACHELINE_SIZE
+#define ARCH_DMA_MINALIGN	CONFIG_SYS_CACHELINE_SIZE
+#else
+#define ARCH_DMA_MINALIGN	128
+#endif
+
+#endif /* __ASM_ARC_CACHE_H */
diff --git a/arch/arc/include/asm/config.h b/arch/arc/include/asm/config.h
new file mode 100644
index 0000000..5761def
--- /dev/null
+++ b/arch/arc/include/asm/config.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_CONFIG_H_
+#define __ASM_ARC_CONFIG_H_
+
+#define CONFIG_LMB
+
+#endif /*__ASM_ARC_CONFIG_H_ */
diff --git a/arch/arc/include/asm/errno.h b/arch/arc/include/asm/errno.h
new file mode 100644
index 0000000..4c82b50
--- /dev/null
+++ b/arch/arc/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/arc/include/asm/global_data.h b/arch/arc/include/asm/global_data.h
new file mode 100644
index 0000000..d644e80
--- /dev/null
+++ b/arch/arc/include/asm/global_data.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	__ASM_ARC_GLOBAL_DATA_H
+#define __ASM_ARC_GLOBAL_DATA_H
+
+/* Architecture-specific global data */
+struct arch_global_data {
+	int running_on_hw;
+};
+
+#include <asm-generic/global_data.h>
+
+#define DECLARE_GLOBAL_DATA_PTR		register volatile gd_t *gd asm ("r25")
+
+#endif /* __ASM_ARC_GLOBAL_DATA_H */
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
new file mode 100644
index 0000000..24b7337
--- /dev/null
+++ b/arch/arc/include/asm/io.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_IO_H
+#define __ASM_ARC_IO_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+static inline void sync(void)
+{
+	/* Not yet implemented */
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 b;
+
+	__asm__ __volatile__("ldb%U1	%0, %1\n"
+			     : "=r" (b)
+			     : "m" (*(volatile u8 __force *)addr)
+			     : "memory");
+	return b;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 s;
+
+	__asm__ __volatile__("ldw%U1	%0, %1\n"
+			     : "=r" (s)
+			     : "m" (*(volatile u16 __force *)addr)
+			     : "memory");
+	return s;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 w;
+
+	__asm__ __volatile__("ld%U1	%0, %1\n"
+			     : "=r" (w)
+			     : "m" (*(volatile u32 __force *)addr)
+			     : "memory");
+	return w;
+}
+
+#define readb __raw_readb
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+	return __le16_to_cpu(__raw_readw(addr));
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+	return __le32_to_cpu(__raw_readl(addr));
+}
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stb%U1	%0, %1\n"
+			     :
+			     : "r" (b), "m" (*(volatile u8 __force *)addr)
+			     : "memory");
+}
+
+static inline void __raw_writew(u16 s, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stw%U1	%0, %1\n"
+			     :
+			     : "r" (s), "m" (*(volatile u16 __force *)addr)
+			     : "memory");
+}
+
+static inline void __raw_writel(u32 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("st%U1	%0, %1\n"
+			     :
+			     : "r" (w), "m" (*(volatile u32 __force *)addr)
+			     : "memory");
+}
+
+#define writeb __raw_writeb
+#define writew(b, addr) __raw_writew(__cpu_to_le16(b), addr)
+#define writel(b, addr) __raw_writel(__cpu_to_le32(b), addr)
+
+static inline int __raw_readsb(unsigned int addr, void *data, int bytelen)
+{
+	__asm__ __volatile__ ("1:ld.di	r8, [r0]\n"
+			      "sub.f	r2, r2, 1\n"
+			      "bnz.d	1b\n"
+			      "stb.ab	r8, [r1, 1]\n"
+			      :
+			      : "r" (addr), "r" (data), "r" (bytelen)
+			      : "r8");
+	return bytelen;
+}
+
+static inline int __raw_readsw(unsigned int addr, void *data, int wordlen)
+{
+	__asm__ __volatile__ ("1:ld.di	r8, [r0]\n"
+			      "sub.f	r2, r2, 1\n"
+			      "bnz.d	1b\n"
+			      "stw.ab	r8, [r1, 2]\n"
+			      :
+			      : "r" (addr), "r" (data), "r" (wordlen)
+			      : "r8");
+	return wordlen;
+}
+
+static inline int __raw_readsl(unsigned int addr, void *data, int longlen)
+{
+	__asm__ __volatile__ ("1:ld.di	r8, [r0]\n"
+			      "sub.f	r2, r2, 1\n"
+			      "bnz.d	1b\n"
+			      "st.ab	r8, [r1, 4]\n"
+			      :
+			      : "r" (addr), "r" (data), "r" (longlen)
+			      : "r8");
+	return longlen;
+}
+
+static inline int __raw_writesb(unsigned int addr, void *data, int bytelen)
+{
+	__asm__ __volatile__ ("1:ldb.ab	r8, [r1, 1]\n"
+			      "sub.f	r2, r2, 1\n"
+			      "bnz.d	1b\n"
+			      "st.di	r8, [r0, 0]\n"
+			      :
+			      : "r" (addr), "r" (data), "r" (bytelen)
+			      : "r8");
+	return bytelen;
+}
+
+static inline int __raw_writesw(unsigned int addr, void *data, int wordlen)
+{
+	__asm__ __volatile__ ("1:ldw.ab	r8, [r1, 2]\n"
+			      "sub.f	r2, r2, 1\n"
+			      "bnz.d	1b\n"
+			      "st.ab.di	r8, [r0, 0]\n"
+			      :
+			      : "r" (addr), "r" (data), "r" (wordlen)
+			      : "r8");
+	return wordlen;
+}
+
+static inline int __raw_writesl(unsigned int addr, void *data, int longlen)
+{
+	__asm__ __volatile__ ("1:ld.ab	r8, [r1, 4]\n"
+			      "sub.f	r2, r2, 1\n"
+			      "bnz.d	1b\n"
+			      "st.ab.di	r8, [r0, 0]\n"
+			      :
+			      : "r" (addr), "r" (data), "r" (longlen)
+			      : "r8");
+	return longlen;
+}
+
+#define out_arch(type, endian, a, v)	__raw_write##type(cpu_to_##endian(v), a)
+#define in_arch(type, endian, a)	endian##_to_cpu(__raw_read##type(a))
+
+#define out_le32(a, v)	out_arch(l, le32, a, v)
+#define out_le16(a, v)	out_arch(w, le16, a, v)
+
+#define in_le32(a)	in_arch(l, le32, a)
+#define in_le16(a)	in_arch(w, le16, a)
+
+#define out_be32(a, v)	out_arch(l, be32, a, v)
+#define out_be16(a, v)	out_arch(w, be16, a, v)
+
+#define in_be32(a)	in_arch(l, be32, a)
+#define in_be16(a)	in_arch(w, be16, a)
+
+#define out_8(a, v)	__raw_writeb(v, a)
+#define in_8(a)		__raw_readb(a)
+
+/*
+ * Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+	out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+	out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+#endif	/* __ASM_ARC_IO_H */
diff --git a/arch/arc/include/asm/posix_types.h b/arch/arc/include/asm/posix_types.h
new file mode 100644
index 0000000..20415f0
--- /dev/null
+++ b/arch/arc/include/asm/posix_types.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_POSIX_TYPES_H
+#define __ASM_ARC_POSIX_TYPES_H
+
+typedef unsigned short		__kernel_dev_t;
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+typedef long			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_daddr_t;
+typedef char			*__kernel_caddr_t;
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+typedef unsigned short		__kernel_old_uid_t;
+typedef unsigned short		__kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+#endif
+
+#endif	/* __ASM_ARC_POSIX_TYPES_H */
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
new file mode 100644
index 0000000..8f73b31
--- /dev/null
+++ b/arch/arc/include/asm/ptrace.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_PTRACE_H
+#define __ASM_ARC_PTRACE_H
+
+struct pt_regs {
+	long bta;
+	long lp_start;
+	long lp_end;
+	long lp_count;
+	long status32;
+	long ret;
+	long blink;
+	long fp;
+	long r26;	/* gp */
+	long r25;
+	long r24;
+	long r23;
+	long r22;
+	long r21;
+	long r20;
+	long r19;
+	long r18;
+	long r17;
+	long r16;
+	long r15;
+	long r14;
+	long r13;
+	long r12;
+	long r11;
+	long r10;
+	long r9;
+	long r8;
+	long r7;
+	long r6;
+	long r5;
+	long r4;
+	long r3;
+	long r2;
+	long r1;
+	long r0;
+	long sp;
+	long ecr;
+};
+
+#endif /* __ASM_ARC_PTRACE_H */
diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h
new file mode 100644
index 0000000..18484a1
--- /dev/null
+++ b/arch/arc/include/asm/sections.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_SECTIONS_H
+#define __ASM_ARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern ulong __text_end;
+
+#endif /* __ASM_ARC_SECTIONS_H */
diff --git a/arch/arc/include/asm/string.h b/arch/arc/include/asm/string.h
new file mode 100644
index 0000000..909129c
--- /dev/null
+++ b/arch/arc/include/asm/string.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_STRING_H
+#define __ASM_ARC_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_STRCHR
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRLEN
+
+extern void *memset(void *ptr, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void memzero(void *ptr, __kernel_size_t n);
+extern int memcmp(const void *, const void *, __kernel_size_t);
+extern char *strchr(const char *s, int c);
+extern char *strcpy(char *dest, const char *src);
+extern int strcmp(const char *cs, const char *ct);
+extern __kernel_size_t strlen(const char *);
+
+#endif /* __ASM_ARC_STRING_H */
diff --git a/arch/arc/include/asm/types.h b/arch/arc/include/asm/types.h
new file mode 100644
index 0000000..24eeb76
--- /dev/null
+++ b/arch/arc/include/asm/types.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_TYPES_H
+#define __ASM_ARC_TYPES_H
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
+
+#endif /* __ASM_ARC_TYPES_H */
diff --git a/arch/arc/include/asm/u-boot-arc.h b/arch/arc/include/asm/u-boot-arc.h
new file mode 100644
index 0000000..0c0e8e6
--- /dev/null
+++ b/arch/arc/include/asm/u-boot-arc.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_U_BOOT_ARC_H__
+#define __ASM_ARC_U_BOOT_ARC_H__
+
+int arch_early_init_r(void);
+
+#endif	/* __ASM_ARC_U_BOOT_ARC_H__ */
diff --git a/arch/arc/include/asm/u-boot.h b/arch/arc/include/asm/u-boot.h
new file mode 100644
index 0000000..e354edf
--- /dev/null
+++ b/arch/arc/include/asm/u-boot.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARC_U_BOOT_H__
+#define __ASM_ARC_U_BOOT_H__
+
+#include <asm-generic/u-boot.h>
+
+/* For image.h:image_check_target_arch() */
+#define IH_ARCH_DEFAULT IH_ARCH_ARC
+
+#endif	/* __ASM_ARC_U_BOOT_H__ */
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h
new file mode 100644
index 0000000..6cecbbb
--- /dev/null
+++ b/arch/arc/include/asm/unaligned.h
@@ -0,0 +1 @@
+#include <asm-generic/unaligned.h>
diff --git a/arch/arc/lib/Makefile b/arch/arc/lib/Makefile
new file mode 100644
index 0000000..7675f85
--- /dev/null
+++ b/arch/arc/lib/Makefile
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += sections.o
+obj-y += relocate.o
+obj-y += strchr-700.o
+obj-y += strcmp.o
+obj-y += strcpy-700.o
+obj-y += strlen.o
+obj-y += memcmp.o
+obj-y += memcpy-700.o
+obj-y += memset.o
+obj-$(CONFIG_CMD_BOOTM) += bootm.o
diff --git a/arch/arc/lib/bootm.c b/arch/arc/lib/bootm.c
new file mode 100644
index 0000000..d185a50
--- /dev/null
+++ b/arch/arc/lib/bootm.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static ulong get_sp(void)
+{
+	ulong ret;
+
+	asm("mov %0, sp" : "=r"(ret) : );
+	return ret;
+}
+
+void arch_lmb_reserve(struct lmb *lmb)
+{
+	ulong sp;
+
+	/*
+	 * Booting a (Linux) kernel image
+	 *
+	 * Allocate space for command line and board info - the
+	 * address should be as high as possible within the reach of
+	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
+	 * memory, which means far enough below the current stack
+	 * pointer.
+	 */
+	sp = get_sp();
+	debug("## Current stack ends at 0x%08lx ", sp);
+
+	/* adjust sp by 4K to be safe */
+	sp -= 4096;
+	lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp));
+}
+
+static int cleanup_before_linux(void)
+{
+	disable_interrupts();
+	flush_dcache_all();
+	invalidate_icache_all();
+
+	return 0;
+}
+
+/* Subcommand: PREP */
+static void boot_prep_linux(bootm_headers_t *images)
+{
+	if (image_setup_linux(images))
+		hang();
+}
+
+/* Subcommand: GO */
+static void boot_jump_linux(bootm_headers_t *images, int flag)
+{
+	void (*kernel_entry)(int zero, int arch, uint params);
+	unsigned int r0, r2;
+	int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+	kernel_entry = (void (*)(int, int, uint))images->ep;
+
+	debug("## Transferring control to Linux (at address %08lx)...\n",
+	      (ulong) kernel_entry);
+	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+	printf("\nStarting kernel ...%s\n\n", fake ?
+	       "(fake run for tracing)" : "");
+	bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
+
+	cleanup_before_linux();
+
+	if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) {
+		r0 = 2;
+		r2 = (unsigned int)images->ft_addr;
+	} else {
+		r0 = 1;
+		r2 = (unsigned int)getenv("bootargs");
+	}
+
+	if (!fake)
+		kernel_entry(r0, 0, r2);
+}
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	/* No need for those on ARC */
+	if ((flag & BOOTM_STATE_OS_BD_T) || (flag & BOOTM_STATE_OS_CMDLINE))
+		return -1;
+
+	if (flag & BOOTM_STATE_OS_PREP) {
+		boot_prep_linux(images);
+		return 0;
+	}
+
+	if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) {
+		boot_jump_linux(images, flag);
+		return 0;
+	}
+
+	boot_prep_linux(images);
+	boot_jump_linux(images, flag);
+	return 0;
+}
diff --git a/arch/arc/lib/memcmp.S b/arch/arc/lib/memcmp.S
new file mode 100644
index 0000000..fa5aac5
--- /dev/null
+++ b/arch/arc/lib/memcmp.S
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifdef __LITTLE_ENDIAN__
+#define WORD2 r2
+#define SHIFT r3
+#else /* __BIG_ENDIAN__ */
+#define WORD2 r3
+#define SHIFT r2
+#endif /* _ENDIAN__ */
+
+.global memcmp
+.align 4
+memcmp:
+	or	%r12, %r0, %r1
+	asl_s	%r12, %r12, 30
+	sub	%r3, %r2, 1
+	brls	%r2, %r12, .Lbytewise
+	ld	%r4, [%r0, 0]
+	ld	%r5, [%r1, 0]
+	lsr.f	%lp_count, %r3, 3
+	lpne	.Loop_end
+	ld_s	WORD2, [%r0, 4]
+	ld_s	%r12, [%r1, 4]
+	brne	%r4, %r5, .Leven
+	ld.a	%r4, [%r0, 8]
+	ld.a	%r5, [%r1, 8]
+	brne	WORD2, %r12, .Lodd
+.Loop_end:
+	asl_s	SHIFT, SHIFT, 3
+	bhs_s	.Last_cmp
+	brne	%r4, %r5, .Leven
+	ld	%r4, [%r0, 4]
+	ld	%r5, [%r1, 4]
+#ifdef __LITTLE_ENDIAN__
+	nop_s
+	/* one more load latency cycle */
+.Last_cmp:
+	xor	%r0, %r4, %r5
+	bset	%r0, %r0, SHIFT
+	sub_s	%r1, %r0, 1
+	bic_s	%r1, %r1, %r0
+	norm	%r1, %r1
+	b.d	.Leven_cmp
+	and	%r1, %r1, 24
+.Leven:
+	xor	%r0, %r4, %r5
+	sub_s	%r1, %r0, 1
+	bic_s	%r1, %r1, %r0
+	norm	%r1, %r1
+	/* slow track insn */
+	and	%r1, %r1, 24
+.Leven_cmp:
+	asl	%r2, %r4, %r1
+	asl	%r12, %r5, %r1
+	lsr_s	%r2, %r2, 1
+	lsr_s	%r12, %r12, 1
+	j_s.d	[%blink]
+	sub	%r0, %r2, %r12
+	.balign	4
+.Lodd:
+	xor	%r0, WORD2, %r12
+	sub_s	%r1, %r0, 1
+	bic_s	%r1, %r1, %r0
+	norm	%r1, %r1
+	/* slow track insn */
+	and	%r1, %r1, 24
+	asl_s	%r2, %r2, %r1
+	asl_s	%r12, %r12, %r1
+	lsr_s	%r2, %r2, 1
+	lsr_s	%r12, %r12, 1
+	j_s.d	[%blink]
+	sub	%r0, %r2, %r12
+#else /* __BIG_ENDIAN__ */
+.Last_cmp:
+	neg_s	SHIFT, SHIFT
+	lsr	%r4, %r4, SHIFT
+	lsr	%r5, %r5, SHIFT
+	/* slow track insn */
+.Leven:
+	sub.f	%r0, %r4, %r5
+	mov.ne	%r0, 1
+	j_s.d	[%blink]
+	bset.cs	%r0, %r0, 31
+.Lodd:
+	cmp_s	WORD2, %r12
+
+	mov_s	%r0, 1
+	j_s.d	[%blink]
+	bset.cs	%r0, %r0, 31
+#endif /* _ENDIAN__ */
+	.balign	4
+.Lbytewise:
+	breq	%r2, 0, .Lnil
+	ldb	%r4, [%r0, 0]
+	ldb	%r5, [%r1, 0]
+	lsr.f	%lp_count, %r3
+	lpne	.Lbyte_end
+	ldb_s	%r3, [%r0, 1]
+	ldb	%r12, [%r1, 1]
+	brne	%r4, %r5, .Lbyte_even
+	ldb.a	%r4, [%r0, 2]
+	ldb.a	%r5, [%r1, 2]
+	brne	%r3, %r12, .Lbyte_odd
+.Lbyte_end:
+	bcc	.Lbyte_even
+	brne	%r4, %r5, .Lbyte_even
+	ldb_s	%r3, [%r0, 1]
+	ldb_s	%r12, [%r1, 1]
+.Lbyte_odd:
+	j_s.d	[%blink]
+	sub	%r0, %r3, %r12
+.Lbyte_even:
+	j_s.d	[%blink]
+	sub	%r0, %r4, %r5
+.Lnil:
+	j_s.d	[%blink]
+	mov	%r0, 0
diff --git a/arch/arc/lib/memcpy-700.S b/arch/arc/lib/memcpy-700.S
new file mode 100644
index 0000000..51dd73a
--- /dev/null
+++ b/arch/arc/lib/memcpy-700.S
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.global memcpy
+.align 4
+memcpy:
+	or	%r3, %r0, %r1
+	asl_s	%r3, %r3, 30
+	mov_s	%r5, %r0
+	brls.d	%r2, %r3, .Lcopy_bytewise
+	sub.f	%r3, %r2, 1
+	ld_s	%r12, [%r1, 0]
+	asr.f	%lp_count, %r3, 3
+	bbit0.d	%r3, 2, .Lnox4
+	bmsk_s	%r2, %r2, 1
+	st.ab	%r12, [%r5, 4]
+	ld.a	%r12, [%r1, 4]
+.Lnox4:
+	lppnz	.Lendloop
+	ld_s	%r3, [%r1, 4]
+	st.ab	%r12, [%r5, 4]
+	ld.a	%r12, [%r1, 8]
+	st.ab	%r3, [%r5, 4]
+.Lendloop:
+	breq	%r2, 0, .Last_store
+	ld	%r3, [%r5, 0]
+#ifdef __LITTLE_ENDIAN__
+	add3	%r2, -1, %r2
+	/* uses long immediate */
+	xor_s	%r12, %r12, %r3
+	bmsk	%r12, %r12, %r2
+	xor_s	%r12, %r12, %r3
+#else /* __BIG_ENDIAN__ */
+	sub3	%r2, 31, %r2
+	/* uses long immediate */
+	xor_s	%r3, %r3, %r12
+	bmsk	%r3, %r3, %r2
+	xor_s	%r12, %r12, %r3
+#endif /* _ENDIAN__ */
+.Last_store:
+	j_s.d	[%blink]
+	st	%r12, [%r5, 0]
+
+	.balign	4
+.Lcopy_bytewise:
+	jcs	[%blink]
+	ldb_s	%r12, [%r1, 0]
+	lsr.f	%lp_count, %r3
+	bhs_s	.Lnox1
+	stb.ab	%r12, [%r5, 1]
+	ldb.a	%r12, [%r1, 1]
+.Lnox1:
+	lppnz	.Lendbloop
+	ldb_s	%r3, [%r1, 1]
+	stb.ab	%r12, [%r5, 1]
+	ldb.a	%r12, [%r1, 2]
+	stb.ab	%r3, [%r5, 1]
+.Lendbloop:
+	j_s.d	[%blink]
+	stb	%r12, [%r5, 0]
diff --git a/arch/arc/lib/memset.S b/arch/arc/lib/memset.S
new file mode 100644
index 0000000..017e8af
--- /dev/null
+++ b/arch/arc/lib/memset.S
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#define SMALL	7 /* Must be at least 6 to deal with alignment/loop issues.  */
+
+.global memset
+.align 4
+memset:
+	mov_s	%r4, %r0
+	or	%r12, %r0, %r2
+	bmsk.f	%r12, %r12, 1
+	extb_s	%r1, %r1
+	asl	%r3, %r1, 8
+	beq.d	.Laligned
+	or_s	%r1, %r1, %r3
+	brls	%r2, SMALL, .Ltiny
+	add	%r3, %r2, %r0
+	stb	%r1, [%r3, -1]
+	bclr_s	%r3, %r3, 0
+	stw	%r1, [%r3, -2]
+	bmsk.f	%r12, %r0, 1
+	add_s	%r2, %r2, %r12
+	sub.ne	%r2, %r2, 4
+	stb.ab	%r1, [%r4, 1]
+	and	%r4, %r4, -2
+	stw.ab	%r1, [%r4, 2]
+	and	%r4, %r4, -4
+
+	.balign	4
+.Laligned:
+	asl	%r3, %r1, 16
+	lsr.f	%lp_count, %r2, 2
+	or_s	%r1, %r1, %r3
+	lpne	.Loop_end
+	st.ab	%r1, [%r4, 4]
+.Loop_end:
+	j_s	[%blink]
+
+	.balign	4
+.Ltiny:
+	mov.f	%lp_count, %r2
+	lpne	.Ltiny_end
+	stb.ab	%r1, [%r4, 1]
+.Ltiny_end:
+	j_s	[%blink]
+
+/*
+ * memzero: @r0 = mem, @r1 = size_t
+ * memset:  @r0 = mem, @r1 = char, @r2 = size_t
+ */
+
+.global memzero
+.align 4
+memzero:
+	/* adjust bzero args to memset args */
+	mov	%r2, %r1
+	mov	%r1, 0
+	/* tail call so need to tinker with blink */
+	b	memset
diff --git a/arch/arc/lib/relocate.c b/arch/arc/lib/relocate.c
new file mode 100644
index 0000000..2482bcd
--- /dev/null
+++ b/arch/arc/lib/relocate.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <elf.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Base functionality is taken from x86 version with added ARC-specifics
+ */
+int do_elf_reloc_fixups(void)
+{
+	Elf32_Rela *re_src = (Elf32_Rela *)(&__rel_dyn_start);
+	Elf32_Rela *re_end = (Elf32_Rela *)(&__rel_dyn_end);
+
+	Elf32_Addr *offset_ptr_rom, *last_offset = NULL;
+	Elf32_Addr *offset_ptr_ram;
+
+	do {
+		/* Get the location from the relocation entry */
+		offset_ptr_rom = (Elf32_Addr *)re_src->r_offset;
+
+		/* Check that the location of the relocation is in .text */
+		if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE &&
+		    offset_ptr_rom > last_offset) {
+			unsigned int val;
+			/* Switch to the in-RAM version */
+			offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom +
+							gd->reloc_off);
+
+			/*
+			 * Use "memcpy" because target location might be
+			 * 16-bit aligned on ARC so we may need to read
+			 * byte-by-byte. On attempt to read entire word by
+			 * CPU throws an exception
+			 */
+			memcpy(&val, offset_ptr_ram, sizeof(int));
+
+#ifdef __LITTLE_ENDIAN__
+			/* If location in ".text" section swap value */
+			if ((unsigned int)offset_ptr_rom <
+			    (unsigned int)&__text_end)
+				val = (val << 16) | (val >> 16);
+#endif
+
+			/* Check that the target points into .text */
+			if (val >= CONFIG_SYS_TEXT_BASE && val <=
+			    (unsigned int)&__bss_end) {
+				val += gd->reloc_off;
+#ifdef __LITTLE_ENDIAN__
+				/* If location in ".text" section swap value */
+				if ((unsigned int)offset_ptr_rom <
+				    (unsigned int)&__text_end)
+					val = (val << 16) | (val >> 16);
+#endif
+				memcpy(offset_ptr_ram, &val, sizeof(int));
+			} else {
+				debug("   %p: rom reloc %x, ram %p, value %x, limit %x\n",
+				      re_src, re_src->r_offset, offset_ptr_ram,
+				      val, (unsigned int)&__bss_end);
+			}
+		} else {
+			debug("   %p: rom reloc %x, last %p\n", re_src,
+			      re_src->r_offset, last_offset);
+		}
+		last_offset = offset_ptr_rom;
+
+	} while (++re_src < re_end);
+
+	return 0;
+}
diff --git a/arch/arc/lib/sections.c b/arch/arc/lib/sections.c
new file mode 100644
index 0000000..b0b46a4
--- /dev/null
+++ b/arch/arc/lib/sections.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * For some reason linker sets linker-generated symbols to zero in PIE mode.
+ * A work-around is substitution of linker-generated symbols with
+ * compiler-generated symbols which are properly handled by linker in PAE mode.
+ */
+
+char __bss_start[0] __attribute__((section(".__bss_start")));
+char __bss_end[0] __attribute__((section(".__bss_end")));
+char __image_copy_start[0] __attribute__((section(".__image_copy_start")));
+char __image_copy_end[0] __attribute__((section(".__image_copy_end")));
+char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start")));
+char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end")));
+char __text_start[0] __attribute__((section(".__text_start")));
+char __text_end[0] __attribute__((section(".__text_end")));
+char __init_end[0] __attribute__((section(".__init_end")));
diff --git a/arch/arc/lib/strchr-700.S b/arch/arc/lib/strchr-700.S
new file mode 100644
index 0000000..55fcc9f
--- /dev/null
+++ b/arch/arc/lib/strchr-700.S
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * ARC700 has a relatively long pipeline and branch prediction, so we want
+ * to avoid branches that are hard to predict.  On the other hand, the
+ * presence of the norm instruction makes it easier to operate on whole
+ * words branch-free.
+ */
+
+.global strchr
+.align 4
+strchr:
+	extb_s	%r1, %r1
+	asl	%r5, %r1, 8
+	bmsk	%r2, %r0, 1
+	or	%r5, %r5, %r1
+	mov_s	%r3, 0x01010101
+	breq.d	%r2, %r0, .Laligned
+	asl	%r4, %r5, 16
+	sub_s	%r0, %r0, %r2
+	asl	%r7, %r2, 3
+	ld_s	%r2, [%r0]
+#ifdef __LITTLE_ENDIAN__
+	asl	%r7, %r3, %r7
+#else /* __BIG_ENDIAN__ */
+	lsr	%r7, %r3, %r7
+#endif /* _ENDIAN__ */
+	or	%r5, %r5, %r4
+	ror	%r4, %r3
+	sub	%r12, %r2, %r7
+	bic_s	%r12, %r12, %r2
+	and	%r12, %r12, %r4
+	brne.d	%r12, 0, .Lfound0_ua
+	xor	%r6, %r2, %r5
+	ld.a	%r2, [%r0, 4]
+	sub	%r12, %r6, %r7
+	bic	%r12, %r12, %r6
+#ifdef __LITTLE_ENDIAN__
+	and	%r7, %r12, %r4
+	/* For speed, we want this branch to be unaligned. */
+	breq	%r7, 0, .Loop
+	/* Likewise this one */
+	b	.Lfound_char
+#else /* __BIG_ENDIAN__ */
+	and	%r12, %r12, %r4
+	/* For speed, we want this branch to be unaligned. */
+	breq	%r12, 0, .Loop
+	lsr_s	%r12, %r12, 7
+	bic 	%r2, %r7, %r6
+	b.d	.Lfound_char_b
+	and_s	%r2, %r2, %r12
+#endif /* _ENDIAN__ */
+	/* We require this code address to be unaligned for speed...  */
+.Laligned:
+	ld_s	%r2, [%r0]
+	or	%r5, %r5, %r4
+	ror	%r4, %r3
+	/* ... so that this code address is aligned, for itself and ...  */
+.Loop:
+	sub	%r12, %r2, %r3
+	bic_s	%r12, %r12, %r2
+	and	%r12, %r12, %r4
+	brne.d	%r12, 0, .Lfound0
+	xor	%r6, %r2, %r5
+	ld.a	%r2, [%r0, 4]
+	sub	%r12, %r6, %r3
+	bic	%r12, %r12, %r6
+	and	%r7, %r12, %r4
+	breq	%r7, 0, .Loop
+	/*
+	 *... so that this branch is unaligned.
+	 * Found searched-for character.
+	 * r0 has already advanced to next word.
+	 */
+#ifdef __LITTLE_ENDIAN__
+	/*
+	 * We only need the information about the first matching byte
+	 * (i.e. the least significant matching byte) to be exact,
+	 * hence there is no problem with carry effects.
+	 */
+.Lfound_char:
+	sub	%r3, %r7, 1
+	bic	%r3, %r3, %r7
+	norm	%r2, %r3
+	sub_s	%r0, %r0, 1
+	asr_s	%r2, %r2, 3
+	j.d	[%blink]
+	sub_s	%r0, %r0, %r2
+
+	.balign	4
+.Lfound0_ua:
+	mov	%r3, %r7
+.Lfound0:
+	sub	%r3, %r6, %r3
+	bic	%r3, %r3, %r6
+	and	%r2, %r3, %r4
+	or_s	%r12, %r12, %r2
+	sub_s	%r3, %r12, 1
+	bic_s	%r3, %r3, %r12
+	norm	%r3, %r3
+	add_s	%r0, %r0, 3
+	asr_s	%r12, %r3, 3
+	asl.f	0, %r2, %r3
+	sub_s	%r0, %r0, %r12
+	j_s.d	[%blink]
+	mov.pl	%r0, 0
+#else /* __BIG_ENDIAN__ */
+.Lfound_char:
+	lsr	%r7, %r7, 7
+
+	bic	%r2, %r7, %r6
+.Lfound_char_b:
+	norm	%r2, %r2
+	sub_s	%r0, %r0, 4
+	asr_s	%r2, %r2, 3
+	j.d	[%blink]
+	add_s	%r0, %r0, %r2
+
+.Lfound0_ua:
+	mov_s	%r3, %r7
+.Lfound0:
+	asl_s	%r2, %r2, 7
+	or	%r7, %r6, %r4
+	bic_s	%r12, %r12, %r2
+	sub	%r2, %r7, %r3
+	or	%r2, %r2, %r6
+	bic	%r12, %r2, %r12
+	bic.f	%r3, %r4, %r12
+	norm	%r3, %r3
+
+	add.pl	%r3, %r3, 1
+	asr_s	%r12, %r3, 3
+	asl.f	0, %r2, %r3
+	add_s	%r0, %r0, %r12
+	j_s.d	[%blink]
+	mov.mi	%r0, 0
+#endif /* _ENDIAN__ */
diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S
new file mode 100644
index 0000000..8cb7d2f
--- /dev/null
+++ b/arch/arc/lib/strcmp.S
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * This is optimized primarily for the ARC700.
+ * It would be possible to speed up the loops by one cycle / word
+ * respective one cycle / byte by forcing double source 1 alignment, unrolling
+ * by a factor of two, and speculatively loading the second word / byte of
+ * source 1; however, that would increase the overhead for loop setup / finish,
+ * and strcmp might often terminate early.
+ */
+
+.global strcmp
+.align 4
+strcmp:
+	or	%r2, %r0, %r1
+	bmsk_s	%r2, %r2, 1
+	brne	%r2, 0, .Lcharloop
+	mov_s	%r12, 0x01010101
+	ror	%r5, %r12
+.Lwordloop:
+	ld.ab	%r2, [%r0, 4]
+	ld.ab	%r3, [%r1, 4]
+	nop_s
+	sub	%r4, %r2, %r12
+	bic	%r4, %r4, %r2
+	and	%r4, %r4, %r5
+	brne	%r4, 0, .Lfound0
+	breq	%r2 ,%r3, .Lwordloop
+#ifdef	__LITTLE_ENDIAN__
+	xor	%r0, %r2, %r3	/* mask for difference */
+	sub_s	%r1, %r0, 1
+	bic_s	%r0, %r0, %r1	/* mask for least significant difference bit */
+	sub	%r1, %r5, %r0
+	xor	%r0, %r5, %r1	/* mask for least significant difference byte */
+	and_s	%r2, %r2, %r0
+	and_s	%r3, %r3, %r0
+#endif /* _ENDIAN__ */
+	cmp_s	%r2, %r3
+	mov_s	%r0, 1
+	j_s.d	[%blink]
+	bset.lo	%r0, %r0, 31
+
+	.balign	4
+#ifdef __LITTLE_ENDIAN__
+.Lfound0:
+	xor	%r0, %r2, %r3	/* mask for difference */
+	or	%r0, %r0, %r4	/* or in zero indicator */
+	sub_s	%r1, %r0, 1
+	bic_s	%r0, %r0, %r1	/* mask for least significant difference bit */
+	sub	%r1, %r5, %r0
+	xor	%r0, %r5, %r1	/* mask for least significant difference byte */
+	and_s	%r2, %r2, %r0
+	and_s	%r3, %r3, %r0
+	sub.f	%r0, %r2, %r3
+	mov.hi	%r0, 1
+	j_s.d	[%blink]
+	bset.lo	%r0, %r0, 31
+#else /* __BIG_ENDIAN__ */
+	/*
+	 * The zero-detection above can mis-detect 0x01 bytes as zeroes
+	 * because of carry-propagateion from a lower significant zero byte.
+	 * We can compensate for this by checking that bit0 is zero.
+	 * This compensation is not necessary in the step where we
+	 * get a low estimate for r2, because in any affected bytes
+	 * we already have 0x00 or 0x01, which will remain unchanged
+	 * when bit 7 is cleared.
+	 */
+	.balign	4
+.Lfound0:
+	lsr	%r0, %r4, 8
+	lsr_s	%r1, %r2
+	bic_s	%r2, %r2, %r0	/* get low estimate for r2 and get ... */
+	bic_s	%r0, %r0, %r1	/* <this is the adjusted mask for zeros> */
+	or_s	%r3, %r3, %r0	/* ... high estimate r3 so that r2 > r3 will */
+	cmp_s	%r3, %r2	/* ... be independent of trailing garbage */
+	or_s	%r2, %r2, %r0	/* likewise for r3 > r2 */
+	bic_s	%r3, %r3, %r0
+	rlc	%r0, 0		/* r0 := r2 > r3 ? 1 : 0 */
+	cmp_s	%r2, %r3
+	j_s.d	[%blink]
+	bset.lo	%r0, %r0, 31
+#endif /* _ENDIAN__ */
+
+	.balign	4
+.Lcharloop:
+	ldb.ab	%r2,[%r0,1]
+	ldb.ab	%r3,[%r1,1]
+	nop_s
+	breq	%r2, 0, .Lcmpend
+	breq	%r2, %r3, .Lcharloop
+.Lcmpend:
+	j_s.d	[%blink]
+	sub	%r0, %r2, %r3
diff --git a/arch/arc/lib/strcpy-700.S b/arch/arc/lib/strcpy-700.S
new file mode 100644
index 0000000..41bb53e
--- /dev/null
+++ b/arch/arc/lib/strcpy-700.S
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * If dst and src are 4 byte aligned, copy 8 bytes at a time.
+ * If the src is 4, but not 8 byte aligned, we first read 4 bytes to get
+ * it 8 byte aligned.  Thus, we can do a little read-ahead, without
+ * dereferencing a cache line that we should not touch.
+ * Note that short and long instructions have been scheduled to avoid
+ * branch stalls.
+ * The beq_s to r3z could be made unaligned & long to avoid a stall
+ * there, but it is not likely to be taken often, and it would also be likely
+ * to cost an unaligned mispredict at the next call.
+ */
+
+.global strcpy
+.align 4
+strcpy:
+	or	%r2, %r0, %r1
+	bmsk_s	%r2, %r2, 1
+	brne.d	%r2, 0, charloop
+	mov_s	%r10, %r0
+	ld_s	%r3, [%r1, 0]
+	mov	%r8, 0x01010101
+	bbit0.d	%r1, 2, loop_start
+	ror	%r12, %r8
+	sub	%r2, %r3, %r8
+	bic_s	%r2, %r2, %r3
+	tst_s	%r2,%r12
+	bne	r3z
+	mov_s	%r4,%r3
+	.balign 4
+loop:
+	ld.a	%r3, [%r1, 4]
+	st.ab	%r4, [%r10, 4]
+loop_start:
+	ld.a	%r4, [%r1, 4]
+	sub	%r2, %r3, %r8
+	bic_s	%r2, %r2, %r3
+	tst_s	%r2, %r12
+	bne_s	r3z
+	st.ab	%r3, [%r10, 4]
+	sub	%r2, %r4, %r8
+	bic	%r2, %r2, %r4
+	tst	%r2, %r12
+	beq	loop
+	mov_s	%r3, %r4
+#ifdef __LITTLE_ENDIAN__
+r3z:	bmsk.f	%r1, %r3, 7
+	lsr_s	%r3, %r3, 8
+#else /* __BIG_ENDIAN__ */
+r3z:	lsr.f	%r1, %r3, 24
+	asl_s	%r3, %r3, 8
+#endif /* _ENDIAN__ */
+	bne.d	r3z
+	stb.ab	%r1, [%r10, 1]
+	j_s	[%blink]
+
+	.balign	4
+charloop:
+	ldb.ab	%r3, [%r1, 1]
+	brne.d	%r3, 0, charloop
+	stb.ab	%r3, [%r10, 1]
+	j	[%blink]
diff --git a/arch/arc/lib/strlen.S b/arch/arc/lib/strlen.S
new file mode 100644
index 0000000..666e22c
--- /dev/null
+++ b/arch/arc/lib/strlen.S
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.global strlen
+.align 4
+strlen:
+	or	%r3, %r0, 7
+	ld	%r2, [%r3, -7]
+	ld.a	%r6, [%r3, -3]
+	mov	%r4, 0x01010101
+	/* uses long immediate */
+#ifdef __LITTLE_ENDIAN__
+	asl_s	%r1, %r0, 3
+	btst_s	%r0, 2
+	asl	%r7, %r4, %r1
+	ror	%r5, %r4
+	sub	%r1, %r2, %r7
+	bic_s	%r1, %r1, %r2
+	mov.eq	%r7, %r4
+	sub	%r12, %r6, %r7
+	bic	%r12, %r12, %r6
+	or.eq	%r12, %r12, %r1
+	and	%r12, %r12, %r5
+	brne	%r12, 0, .Learly_end
+#else /* __BIG_ENDIAN__ */
+	ror	%r5, %r4
+	btst_s	%r0, 2
+	mov_s	%r1, 31
+	sub3	%r7, %r1, %r0
+	sub	%r1, %r2, %r4
+	bic_s	%r1, %r1, %r2
+	bmsk	%r1, %r1, %r7
+	sub	%r12, %r6, %r4
+	bic	%r12, %r12, %r6
+	bmsk.ne	%r12, %r12, %r7
+	or.eq	%r12, %r12, %r1
+	and	%r12, %r12, %r5
+	brne	%r12, 0, .Learly_end
+#endif /* _ENDIAN__ */
+
+.Loop:
+	ld_s	%r2, [%r3, 4]
+	ld.a	%r6, [%r3, 8]
+	/* stall for load result */
+	sub	%r1, %r2, %r4
+	bic_s	%r1, %r1, %r2
+	sub	%r12, %r6, %r4
+	bic	%r12, %r12, %r6
+	or	%r12, %r12, %r1
+	and	%r12, %r12, %r5
+	breq	%r12, 0, .Loop
+.Lend:
+	and.f	%r1, %r1, %r5
+	sub.ne	%r3, %r3, 4
+	mov.eq	%r1, %r12
+#ifdef __LITTLE_ENDIAN__
+	sub_s	%r2, %r1, 1
+	bic_s	%r2, %r2, %r1
+	norm	%r1, %r2
+	sub_s	%r0, %r0, 3
+	lsr_s	%r1, %r1, 3
+	sub	%r0, %r3, %r0
+	j_s.d	[%blink]
+	sub	%r0, %r0, %r1
+#else /* __BIG_ENDIAN__ */
+	lsr_s	%r1, %r1, 7
+	mov.eq	%r2, %r6
+	bic_s	%r1, %r1, %r2
+	norm	%r1, %r1
+	sub	%r0, %r3, %r0
+	lsr_s	%r1, %r1, 3
+	j_s.d	[%blink]
+	add	%r0, %r0, %r1
+#endif /* _ENDIAN */
+.Learly_end:
+	b.d	.Lend
+	sub_s.ne %r1, %r1, %r1
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 98c1253..17b7408 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -108,7 +108,17 @@ endif
 
 # limit ourselves to the sections we want in the .bin.
 ifdef CONFIG_ARM64
-OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn
+OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn
 else
-OBJCFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
+OBJCOPYFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
+endif
+
+ifneq ($(CONFIG_IMX_CONFIG),)
+ifdef CONFIG_SPL
+ifndef CONFIG_SPL_BUILD
+ALL-y += SPL
+endif
+else
+ALL-y += u-boot.imx
+endif
 endif
diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk
index f74228c..a82c6ce 100644
--- a/arch/arm/cpu/arm1136/config.mk
+++ b/arch/arm/cpu/arm1136/config.mk
@@ -7,13 +7,3 @@
 
 # Make ARMv5 to allow more compilers to work, even though its v6.
 PLATFORM_CPPFLAGS += -march=armv5
-
-ifneq ($(CONFIG_IMX_CONFIG),)
-ifdef CONFIG_SPL
-ifdef CONFIG_SPL_BUILD
-ALL-y	+= $(OBJTREE)/SPL
-endif
-else
-ALL-y	+= $(obj)u-boot.imx
-endif
-endif
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 00d1b30..3e2358e 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -70,32 +70,6 @@ _end_vect:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -295,7 +269,6 @@ cpu_init_crit:
 #ifdef CONFIG_SPL_BUILD
 	.align	5
 do_hang:
-	ldr	sp, _TEXT_BASE			/* use 32 words about stack */
 	bl	hang				/* hang and never return */
 #else	/* !CONFIG_SPL_BUILD */
 	.align	5
diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds
index bccde73..0299902 100644
--- a/arch/arm/cpu/arm1136/u-boot-spl.lds
+++ b/arch/arm/cpu/arm1136/u-boot-spl.lds
@@ -33,7 +33,11 @@ SECTIONS
 	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/arm1176/bcm2835/config.mk b/arch/arm/cpu/arm1176/bcm2835/config.mk
deleted file mode 100644
index b87ce24..0000000
--- a/arch/arm/cpu/arm1176/bcm2835/config.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# (C) Copyright 2012 Stephen Warren
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# Don't attempt to override the target CPU/ABI options;
-# the Raspberry Pi toolchain does the right thing by default.
-PLATFORM_RELFLAGS := $(filter-out -msoft-float,$(PLATFORM_RELFLAGS))
-PLATFORM_CPPFLAGS := $(filter-out -march=armv5t,$(PLATFORM_CPPFLAGS))
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index ffd7dd0..ce62011 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -77,33 +77,6 @@ _end_vect:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index f180eb8..1a34842 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -67,32 +67,6 @@ _pad:			.word 0x12345678 /* now 16*4=64 */
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c
index 72c69b9..2c5cd63 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -112,24 +112,38 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
 		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
 		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
 	},
+
+	/*
+	 * T124: 700 MHz
+	 *
+	 * Register   Field  Bits   Width
+	 * ------------------------------
+	 * PLLX_BASE  p      23:20    4
+	 * PLLX_BASE  n      15: 8    8
+	 * PLLX_BASE  m       7: 0    8
+	 */
+	{
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
+		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
+		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
+		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
+	},
 };
 
-void adjust_pllp_out_freqs(void)
+static inline void pllx_set_iddq(void)
 {
+#if defined(CONFIG_TEGRA124)
 	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_PERIPH];
 	u32 reg;
 
-	/* Set T30 PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */
-	reg = readl(&pll->pll_out[0]);	/* OUTA, contains OUT2 / OUT1 */
-	reg |= (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO) | PLLP_OUT2_OVR
-		| (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) | PLLP_OUT1_OVR;
-	writel(reg, &pll->pll_out[0]);
-
-	reg = readl(&pll->pll_out[1]);   /* OUTB, contains OUT4 / OUT3 */
-	reg |= (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) | PLLP_OUT4_OVR
-		| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) | PLLP_OUT3_OVR;
-	writel(reg, &pll->pll_out[1]);
+	/* Disable IDDQ */
+	reg = readl(&clkrst->crc_pllx_misc3);
+	reg &= ~PLLX_IDDQ_MASK;
+	writel(reg, &clkrst->crc_pllx_misc3);
+	udelay(2);
+	debug("%s: IDDQ: PLLX IDDQ = 0x%08X\n", __func__,
+	      readl(&clkrst->crc_pllx_misc3));
+#endif
 }
 
 int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm,
@@ -146,6 +160,8 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm,
 
 	debug(" pllx_set_rate entry\n");
 
+	pllx_set_iddq();
+
 	/* Set BYPASS, m, n and p to PLLX_BASE */
 	reg = PLL_BYPASS_MASK | (divm << PLL_DIVM_SHIFT);
 	reg |= ((divn << PLL_DIVN_SHIFT) | (divp << PLL_DIVP_SHIFT));
@@ -162,18 +178,23 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm,
 		reg |= (1 << PLL_DCCON_SHIFT);
 	writel(reg, &pll->pll_misc);
 
-	/* Enable PLLX */
-	reg = readl(&pll->pll_base);
-	reg |= PLL_ENABLE_MASK;
-
 	/* Disable BYPASS */
+	reg = readl(&pll->pll_base);
 	reg &= ~PLL_BYPASS_MASK;
 	writel(reg, &pll->pll_base);
+	debug("pllx_set_rate: base = 0x%08X\n", reg);
 
 	/* Set lock_enable to PLLX_MISC */
 	reg = readl(&pll->pll_misc);
 	reg |= PLL_LOCK_ENABLE_MASK;
 	writel(reg, &pll->pll_misc);
+	debug("pllx_set_rate: misc = 0x%08X\n", reg);
+
+	/* Enable PLLX last, once it's all configured */
+	reg = readl(&pll->pll_base);
+	reg |= PLL_ENABLE_MASK;
+	writel(reg, &pll->pll_base);
+	debug("pllx_set_rate: base final = 0x%08X\n", reg);
 
 	return 0;
 }
@@ -207,12 +228,6 @@ void init_pllx(void)
 	/* set pllx */
 	sel = &tegra_pll_x_table[chip_sku][osc];
 	pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon);
-
-	/* adjust PLLP_out1-4 on T3x/T114 */
-	if (soc_type >= CHIPID_TEGRA30) {
-		debug("  init_pllx: adjusting PLLP out freqs\n");
-		adjust_pllp_out_freqs();
-	}
 }
 
 void enable_cpu_clock(int enable)
@@ -334,7 +349,6 @@ void reset_A9_cpu(int reset)
 void clock_enable_coresight(int enable)
 {
 	u32 rst, src = 2;
-	int soc_type;
 
 	debug("clock_enable_coresight entry\n");
 	clock_set_enable(PERIPH_ID_CORESIGHT, enable);
@@ -343,20 +357,11 @@ void clock_enable_coresight(int enable)
 	if (enable) {
 		/*
 		 * Put CoreSight on PLLP_OUT0 and divide it down as per
-		 * PLLP base frequency based on SoC type (T20/T30/T114).
+		 * PLLP base frequency based on SoC type (T20/T30+).
 		 * Clock divider request would setup CSITE clock as 144MHz
 		 * for PLLP base 216MHz and 204MHz for PLLP base 408MHz
 		 */
-
-		soc_type = tegra_get_chip();
-		if (soc_type == CHIPID_TEGRA30 || soc_type == CHIPID_TEGRA114)
-			src = CLK_DIVIDER(NVBL_PLLP_KHZ, 204000);
-		else if (soc_type == CHIPID_TEGRA20)
-			src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000);
-		else
-			printf("%s: Unknown SoC type %X!\n",
-				 __func__, soc_type);
-
+		src = CLK_DIVIDER(NVBL_PLLP_KHZ, CSITE_KHZ);
 		clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
 
 		/* Unlock the CPU CoreSight interfaces */
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.h b/arch/arm/cpu/arm720t/tegra-common/cpu.h
index 60412c7..b4ca44f 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.h
+++ b/arch/arm/cpu/arm720t/tegra-common/cpu.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2010-2011
+ * (C) Copyright 2010-2014
  * NVIDIA Corporation <www.nvidia.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -11,9 +11,12 @@
 #define IO_STABILIZATION_DELAY	(1000)
 
 #if defined(CONFIG_TEGRA20)
-#define NVBL_PLLP_KHZ	(216000)
-#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114)
-#define NVBL_PLLP_KHZ	(408000)
+#define NVBL_PLLP_KHZ	216000
+#define CSITE_KHZ	144000
+#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) || \
+	defined(CONFIG_TEGRA124)
+#define NVBL_PLLP_KHZ	408000
+#define CSITE_KHZ	204000
 #else
 #error "Unknown Tegra chip!"
 #endif
@@ -68,3 +71,4 @@ int tegra_get_chip(void);
 int tegra_get_sku_info(void);
 int tegra_get_chip_sku(void);
 void adjust_pllp_out_freqs(void);
+void pmic_enable_cpu_vdd(void);
diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
index 51ecff7..d10b96a 100644
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra114/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -68,7 +68,7 @@ static void enable_cpu_clocks(void)
 	/* Wait for PLL-X to lock */
 	do {
 		reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
-	} while ((reg & (1 << 27)) == 0);
+	} while ((reg & PLL_LOCK_MASK) == 0);
 
 	/* Wait until all clocks are stable */
 	udelay(PLL_STABILIZATION_DELAY);
@@ -126,18 +126,6 @@ void t114_init_clocks(void)
 	/* Set active CPU cluster to G */
 	clrbits_le32(&flow->cluster_control, 1);
 
-	/*
-	 * Switch system clock to PLLP_OUT4 (108 MHz), AVP will now run
-	 * at 108 MHz. This is glitch free as only the source is changed, no
-	 * special precaution needed.
-	 */
-	val = (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) |
-		(SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) |
-		(SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) |
-		(SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) |
-		(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
-	writel(val, &clkrst->crc_sclk_brst_pol);
-
 	writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
 
 	debug("Setting up PLLX\n");
@@ -204,45 +192,43 @@ void t114_init_clocks(void)
 	debug("t114_init_clocks exit\n");
 }
 
-static int is_partition_powered(u32 mask)
+static bool is_partition_powered(u32 partid)
 {
 	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	u32 reg;
 
 	/* Get power gate status */
 	reg = readl(&pmc->pmc_pwrgate_status);
-	return (reg & mask) == mask;
+	return !!(reg & (1 << partid));
 }
 
-static int is_clamp_enabled(u32 mask)
+static bool is_clamp_enabled(u32 partid)
 {
 	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	u32 reg;
 
-	/* Get clamp status. TODO: Add pmc_clamp_status alias to pmc.h */
-	reg = readl(&pmc->pmc_pwrgate_timer_on);
-	return (reg & mask) == mask;
+	/* Get clamp status. */
+	reg = readl(&pmc->pmc_clamp_status);
+	return !!(reg & (1 << partid));
 }
 
-static void power_partition(u32 status, u32 partid)
+static void power_partition(u32 partid)
 {
 	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 
-	debug("%s: status = %08X, part ID = %08X\n", __func__, status, partid);
+	debug("%s: part ID = %08X\n", __func__, partid);
 	/* Is the partition already on? */
-	if (!is_partition_powered(status)) {
+	if (!is_partition_powered(partid)) {
 		/* No, toggle the partition power state (OFF -> ON) */
 		debug("power_partition, toggling state\n");
-		clrbits_le32(&pmc->pmc_pwrgate_toggle, 0x1F);
-		setbits_le32(&pmc->pmc_pwrgate_toggle, partid);
-		setbits_le32(&pmc->pmc_pwrgate_toggle, START_CP);
+		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
 
 		/* Wait for the power to come up */
-		while (!is_partition_powered(status))
+		while (!is_partition_powered(partid))
 			;
 
 		/* Wait for the clamp status to be cleared */
-		while (is_clamp_enabled(status))
+		while (is_clamp_enabled(partid))
 			;
 
 		/* Give I/O signals time to stabilize */
@@ -257,13 +243,13 @@ void powerup_cpus(void)
 	/* We boot to the fast cluster */
 	debug("powerup_cpus entry: G cluster\n");
 	/* Power up the fast cluster rail partition */
-	power_partition(CRAIL, CRAILID);
+	power_partition(CRAIL);
 
 	/* Power up the fast cluster non-CPU partition */
-	power_partition(C0NC, C0NCID);
+	power_partition(C0NC);
 
 	/* Power up the fast cluster CPU0 partition */
-	power_partition(CE0, CE0ID);
+	power_partition(CE0);
 }
 
 void start_cpu(u32 reset_vector)
diff --git a/arch/arm/cpu/arm720t/tegra124/Makefile b/arch/arm/cpu/arm720t/tegra124/Makefile
new file mode 100644
index 0000000..61abf45
--- /dev/null
+++ b/arch/arm/cpu/arm720t/tegra124/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2013-2014
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra124/config.mk b/arch/arm/cpu/arm720t/tegra124/config.mk
new file mode 100644
index 0000000..5e10701
--- /dev/null
+++ b/arch/arm/cpu/arm720t/tegra124/config.mk
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2010-2013
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#/
+USE_PRIVATE_LIBGCC = yes
diff --git a/arch/arm/cpu/arm720t/tegra124/cpu.c b/arch/arm/cpu/arm720t/tegra124/cpu.c
new file mode 100644
index 0000000..c03aaf1
--- /dev/null
+++ b/arch/arm/cpu/arm720t/tegra124/cpu.c
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ahb.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/ap.h>
+#include "../tegra-common/cpu.h"
+
+/* Tegra124-specific CPU init code */
+
+static void enable_cpu_power_rail(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("enable_cpu_power_rail entry\n");
+
+	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
+	pinmux_tristate_disable(PINGRP_PWR_I2C_SCL);
+	pinmux_tristate_disable(PINGRP_PWR_I2C_SDA);
+
+	pmic_enable_cpu_vdd();
+
+	/*
+	 * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
+	 * set it for 5ms as per SysEng (102MHz*5ms = 510000 (7C830h).
+	 */
+	writel(0x7C830, &pmc->pmc_cpupwrgood_timer);
+
+	/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
+	clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
+	setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
+}
+
+static void enable_cpu_clocks(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	debug("enable_cpu_clocks entry\n");
+
+	/* Wait for PLL-X to lock */
+	do {
+		reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+		debug("%s: PLLX base = 0x%08X\n", __func__, reg);
+	} while ((reg & PLL_LOCK_MASK) == 0);
+
+	debug("%s: PLLX locked, delay for stable clocks\n", __func__);
+	/* Wait until all clocks are stable */
+	udelay(PLL_STABILIZATION_DELAY);
+
+	debug("%s: Setting CCLK_BURST and DIVIDER\n", __func__);
+	writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+	writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
+
+	debug("%s: Enabling clock to all CPUs\n", __func__);
+	/* Enable the clock to all CPUs */
+	reg = CLR_CPU3_CLK_STP | CLR_CPU2_CLK_STP | CLR_CPU1_CLK_STP |
+		CLR_CPU0_CLK_STP;
+	writel(reg, &clkrst->crc_clk_cpu_cmplx_clr);
+
+	debug("%s: Enabling main CPU complex clocks\n", __func__);
+	/* Always enable the main CPU complex clocks */
+	clock_enable(PERIPH_ID_CPU);
+	clock_enable(PERIPH_ID_CPULP);
+	clock_enable(PERIPH_ID_CPUG);
+
+	debug("%s: Done\n", __func__);
+}
+
+static void remove_cpu_resets(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	debug("remove_cpu_resets entry\n");
+
+	/* Take the slow and fast partitions out of reset */
+	reg = CLR_NONCPURESET;
+	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
+	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
+
+	/* Clear the SW-controlled reset of the slow cluster */
+	reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
+		CLR_L2RESET | CLR_PRESETDBG;
+	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
+
+	/* Clear the SW-controlled reset of the fast cluster */
+	reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
+		CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 |
+		CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 |
+		CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3 |
+		CLR_L2RESET | CLR_PRESETDBG;
+	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
+}
+
+/**
+ * The Tegra124 requires some special clock initialization, including setting up
+ * the DVC I2C, turning on MSELECT and selecting the G CPU cluster
+ */
+void tegra124_init_clocks(void)
+{
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 val;
+
+	debug("tegra124_init_clocks entry\n");
+
+	/* Set active CPU cluster to G */
+	clrbits_le32(&flow->cluster_control, 1);
+
+	/* Change the oscillator drive strength */
+	val = readl(&clkrst->crc_osc_ctrl);
+	val &= ~OSC_XOFS_MASK;
+	val |= (OSC_DRIVE_STRENGTH << OSC_XOFS_SHIFT);
+	writel(val, &clkrst->crc_osc_ctrl);
+
+	/* Update same value in PMC_OSC_EDPD_OVER XOFS field for warmboot */
+	val = readl(&pmc->pmc_osc_edpd_over);
+	val &= ~PMC_XOFS_MASK;
+	val |= (OSC_DRIVE_STRENGTH << PMC_XOFS_SHIFT);
+	writel(val, &pmc->pmc_osc_edpd_over);
+
+	/* Set HOLD_CKE_LOW_EN to 1 */
+	setbits_le32(&pmc->pmc_cntrl2, HOLD_CKE_LOW_EN);
+
+	debug("Setting up PLLX\n");
+	init_pllx();
+
+	val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
+	writel(val, &clkrst->crc_clk_sys_rate);
+
+	/* Enable clocks to required peripherals. TBD - minimize this list */
+	debug("Enabling clocks\n");
+
+	clock_set_enable(PERIPH_ID_CACHE2, 1);
+	clock_set_enable(PERIPH_ID_GPIO, 1);
+	clock_set_enable(PERIPH_ID_TMR, 1);
+	clock_set_enable(PERIPH_ID_CPU, 1);
+	clock_set_enable(PERIPH_ID_EMC, 1);
+	clock_set_enable(PERIPH_ID_I2C5, 1);
+	clock_set_enable(PERIPH_ID_APBDMA, 1);
+	clock_set_enable(PERIPH_ID_MEM, 1);
+	clock_set_enable(PERIPH_ID_CORESIGHT, 1);
+	clock_set_enable(PERIPH_ID_MSELECT, 1);
+	clock_set_enable(PERIPH_ID_DVFS, 1);
+
+	/*
+	 * Set MSELECT clock source as PLLP (00), and ask for a clock
+	 * divider that would set the MSELECT clock at 102MHz for a
+	 * PLLP base of 408MHz.
+	 */
+	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
+				    CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
+
+	/* Give clock time to stabilize */
+	udelay(IO_STABILIZATION_DELAY);
+
+	/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
+	clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
+
+	/* Give clock time to stabilize */
+	udelay(IO_STABILIZATION_DELAY);
+
+	/* Take required peripherals out of reset */
+	debug("Taking periphs out of reset\n");
+	reset_set_enable(PERIPH_ID_CACHE2, 0);
+	reset_set_enable(PERIPH_ID_GPIO, 0);
+	reset_set_enable(PERIPH_ID_TMR, 0);
+	reset_set_enable(PERIPH_ID_COP, 0);
+	reset_set_enable(PERIPH_ID_EMC, 0);
+	reset_set_enable(PERIPH_ID_I2C5, 0);
+	reset_set_enable(PERIPH_ID_APBDMA, 0);
+	reset_set_enable(PERIPH_ID_MEM, 0);
+	reset_set_enable(PERIPH_ID_CORESIGHT, 0);
+	reset_set_enable(PERIPH_ID_MSELECT, 0);
+	reset_set_enable(PERIPH_ID_DVFS, 0);
+
+	debug("tegra124_init_clocks exit\n");
+}
+
+static bool is_partition_powered(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 reg;
+
+	/* Get power gate status */
+	reg = readl(&pmc->pmc_pwrgate_status);
+	return !!(reg & (1 << partid));
+}
+
+static void power_partition(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("%s: part ID = %08X\n", __func__, partid);
+	/* Is the partition already on? */
+	if (!is_partition_powered(partid)) {
+		/* No, toggle the partition power state (OFF -> ON) */
+		debug("power_partition, toggling state\n");
+		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
+
+		/* Wait for the power to come up */
+		while (!is_partition_powered(partid))
+			;
+
+		/* Give I/O signals time to stabilize */
+		udelay(IO_STABILIZATION_DELAY);
+	}
+}
+
+void powerup_cpus(void)
+{
+	debug("powerup_cpus entry\n");
+
+	/* We boot to the fast cluster */
+	debug("powerup_cpus entry: G cluster\n");
+
+	/* Power up the fast cluster rail partition */
+	debug("powerup_cpus: CRAIL\n");
+	power_partition(CRAIL);
+
+	/* Power up the fast cluster non-CPU partition */
+	debug("powerup_cpus: C0NC\n");
+	power_partition(C0NC);
+
+	/* Power up the fast cluster CPU0 partition */
+	debug("powerup_cpus: CE0\n");
+	power_partition(CE0);
+
+	debug("powerup_cpus: done\n");
+}
+
+void start_cpu(u32 reset_vector)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
+
+	tegra124_init_clocks();
+
+	/* Set power-gating timer multiplier */
+	clrbits_le32(&pmc->pmc_pwrgate_timer_mult, TIMER_MULT_MASK);
+	setbits_le32(&pmc->pmc_pwrgate_timer_mult, MULT_8);
+
+	enable_cpu_power_rail();
+	enable_cpu_clocks();
+	clock_enable_coresight(1);
+	remove_cpu_resets();
+	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+	powerup_cpus();
+	debug("start_cpu exit, should continue @ reset_vector\n");
+}
diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c
index e162357..a806483 100644
--- a/arch/arm/cpu/arm720t/tegra30/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra30/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -84,18 +84,6 @@ void t30_init_clocks(void)
 	/* Set active CPU cluster to G */
 	clrbits_le32(flow->cluster_control, 1 << 0);
 
-	/*
-	 * Switch system clock to PLLP_OUT4 (108 MHz), AVP will now run
-	 * at 108 MHz. This is glitch free as only the source is changed, no
-	 * special precaution needed.
-	 */
-	val = (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) |
-		(SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) |
-		(SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) |
-		(SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) |
-		(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
-	writel(val, &clkrst->crc_sclk_brst_pol);
-
 	writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
 
 	val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) |
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index 4bed4fc..9699404 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -50,5 +50,8 @@ SECTIONS
 	.bss : { *(.bss*) }
 	__bss_end = .;
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
 }
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index a67b659..7bf094a 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -55,32 +55,6 @@ _fiq:			.word fiq
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
index e83968f..a9ec81a 100644
--- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
+++ b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
@@ -26,27 +26,18 @@
 #define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL
 #endif
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
 .globl lowlevel_init
 .type lowlevel_init,function
 lowlevel_init:
 
-	mov	r5, pc		/* r5 = POS1 + 4 current */
 POS1:
+	adr	r5, POS1	/* r5 = POS1 run time */
 	ldr	r0, =POS1	/* r0 = POS1 compile */
-	ldr	r2, _TEXT_BASE
-	sub	r0, r0, r2	/* r0 = POS1-_TEXT_BASE (POS1 relative) */
 	sub	r5, r5, r0	/* r0 = CONFIG_SYS_TEXT_BASE-1 */
-	sub	r5, r5, #4	/* r1 = text base - current */
 
 	/* memory control configuration 1 */
 	ldr	r0, =SMRDATA
 	ldr	r2, =SMRDATA1
-	ldr	r1, _TEXT_BASE
-	sub	r0, r0, r1
-	sub	r2, r2, r1
 	add	r0, r0, r5
 	add	r2, r2, r5
 0:
@@ -149,9 +140,6 @@ PLL_setup_end:
 
 	ldr	r0, =SMRDATA1
 	ldr	r2, =SMRDATA2
-	ldr	r1, _TEXT_BASE
-	sub	r0, r0, r1
-	sub	r2, r2, r1
 	add	r0, r0, r5
 	add	r2, r2, r5
 2:
diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk
index 4d9895f..bdb3da1 100644
--- a/arch/arm/cpu/arm926ejs/config.mk
+++ b/arch/arm/cpu/arm926ejs/config.mk
@@ -6,13 +6,3 @@
 #
 
 PLATFORM_CPPFLAGS += -march=armv5te
-
-ifneq ($(CONFIG_IMX_CONFIG),)
-ifdef CONFIG_SPL
-ifdef CONFIG_SPL_BUILD
-ALL-y	+= $(OBJTREE)/SPL
-endif
-else
-ALL-y	+= $(obj)u-boot.imx
-endif
-endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/cpu/arm926ejs/davinci/config.mk
index d5c978b..69e9d5a 100644
--- a/arch/arm/cpu/arm926ejs/davinci/config.mk
+++ b/arch/arm/cpu/arm926ejs/davinci/config.mk
@@ -4,5 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 ifndef CONFIG_SPL_BUILD
-ALL-$(CONFIG_SPL_FRAMEWORK)	+= $(obj)u-boot.ais
+ALL-$(CONFIG_SPL_FRAMEWORK)	+= u-boot.ais
 endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S
index 5de2bad..34a0fcb 100644
--- a/arch/arm/cpu/arm926ejs/mxs/start.S
+++ b/arch/arm/cpu/arm926ejs/mxs/start.S
@@ -101,32 +101,6 @@ fiq:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#ifdef CONFIG_SPL_TEXT_BASE
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -207,6 +181,5 @@ _reset:
 	bx	lr
 
 _hang:
-	ldr	sp, _TEXT_BASE			/* switch to abort stack */
 1:
 	bl	1b				/* hang and never return */
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index 80fb9bd..d0b482d 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -49,9 +49,14 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/cpu/arm926ejs/omap/Makefile b/arch/arm/cpu/arm926ejs/omap/Makefile
index bd0a2fb..add9232 100644
--- a/arch/arm/cpu/arm926ejs/omap/Makefile
+++ b/arch/arm/cpu/arm926ejs/omap/Makefile
@@ -5,5 +5,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	= timer.o cpuinfo.o
+obj-y	= timer.o
+obj-$(CONFIG_DISPLAY_CPUINFO) += cpuinfo.o
 obj-y	+= reset.o
diff --git a/arch/arm/cpu/arm926ejs/omap/cpuinfo.c b/arch/arm/cpu/arm926ejs/omap/cpuinfo.c
index 02332ee..587d99a 100644
--- a/arch/arm/cpu/arm926ejs/omap/cpuinfo.c
+++ b/arch/arm/cpu/arm926ejs/omap/cpuinfo.c
@@ -13,7 +13,7 @@
 #include <command.h>
 #include <linux/compiler.h>
 
-#if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP)
+#if defined(CONFIG_OMAP)
 
 #define omap_readw(x)		*(volatile unsigned short *)(x)
 #define omap_readl(x)		*(volatile unsigned long *)(x)
@@ -239,4 +239,4 @@ int print_cpuinfo (void)
 	return 0;
 }
 
-#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */
+#endif /* #if defined(CONFIG_OMAP) */
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index 76b499d..b6d0f65 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -49,9 +49,14 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 5360f55..0717327 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -102,32 +102,6 @@ _fiq:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -330,7 +304,6 @@ flush_dcache:
 #ifdef CONFIG_SPL_BUILD
 	.align	5
 do_hang:
-	ldr	sp, _TEXT_BASE			/* switch to abort stack */
 1:
 	bl	1b				/* hang and never return */
 #else	/* !CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index e16b088..7d50145 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -71,32 +71,6 @@ _vectors_end:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 5783df1..7404ea7 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -67,32 +67,6 @@ _fiq:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 0467d00..119ebb3 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -23,6 +23,7 @@ obj-y	+= nonsec_virt.o
 obj-y	+= virt-v7.o
 endif
 
+obj-$(CONFIG_KONA) += kona-common/
 obj-$(CONFIG_OMAP_COMMON) += omap-common/
 obj-$(CONFIG_TEGRA) += tegra-common/
 
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index c7dad66..2b15a64 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -36,11 +36,15 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const struct gpio_bank gpio_bank_am33xx[4] = {
+static const struct gpio_bank gpio_bank_am33xx[] = {
 	{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
+#ifdef CONFIG_AM43XX
+	{ (void *)AM33XX_GPIO4_BASE, METHOD_GPIO_24XX },
+	{ (void *)AM33XX_GPIO5_BASE, METHOD_GPIO_24XX },
+#endif
 };
 
 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
index 97c00b4..d0bc234 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
@@ -94,10 +94,14 @@ void enable_basic_clocks(void)
 		&cmper->gpio1clkctrl,
 		&cmper->gpio2clkctrl,
 		&cmper->gpio3clkctrl,
+		&cmper->gpio4clkctrl,
+		&cmper->gpio5clkctrl,
 		&cmper->i2c1clkctrl,
+		&cmper->cpgmac0clkctrl,
 		&cmper->emiffwclkctrl,
 		&cmper->emifclkctrl,
 		&cmper->otfaemifclkctrl,
+		&cmper->qspiclkctrl,
 		0
 	};
 
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
index ef14f47..9b5a47b 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -211,11 +211,8 @@ static u32 pll_dco_freq_sel(u32 clkout_dco)
 static u32 pll_sigma_delta_val(u32 clkout_dco)
 {
 	u32 sig_val = 0;
-	float frac_div;
 
-	frac_div = (float) clkout_dco / 250;
-	frac_div = frac_div + 0.90;
-	sig_val = (int)frac_div;
+	sig_val = (clkout_dco + 225) / 250;
 	sig_val = sig_val << 24;
 
 	return sig_val;
diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk
index 8e3668f..5294d16 100644
--- a/arch/arm/cpu/armv7/am33xx/config.mk
+++ b/arch/arm/cpu/armv7/am33xx/config.mk
@@ -4,8 +4,8 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 ifdef CONFIG_SPL_BUILD
-ALL-y	+= $(OBJTREE)/MLO
-ALL-$(CONFIG_SPL_SPI_SUPPORT) += $(OBJTREE)/MLO.byteswap
+ALL-y	+= MLO
+ALL-$(CONFIG_SPL_SPI_SUPPORT) += MLO.byteswap
 else
-ALL-y	+= $(obj)u-boot.img
+ALL-y	+= u-boot.img
 endif
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index d05e666..9a625c4 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -80,8 +80,8 @@ static void configure_mr(int nr, u32 cs)
  */
 void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
 {
-	writel(0x0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
-	writel(0x0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
+	writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
+	writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
 	writel(0x1, &emif_reg[nr]->emif_iodft_tlgc);
 	writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
 
@@ -96,6 +96,7 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
 
 	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
 	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
+	writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
 
 	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) {
 		configure_mr(nr, 0);
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index d28fceb..3e39752 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -113,7 +113,7 @@ void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
 	writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
 	while ((readl(&cm_device->cm_dll_ctrl) && CM_DLL_READYST) == 0)
 		;
-	writel(0x0, &ddrctrl->ddrioctrl);
+	writel(0x80000000, &ddrctrl->ddrioctrl);
 
 	config_io_ctrl(ioregs);
 
diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
index 9302856..b1c28c9 100644
--- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
@@ -38,7 +38,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/armv7/bcm281xx/Makefile b/arch/arm/cpu/armv7/bcm281xx/Makefile
new file mode 100644
index 0000000..98f5aa5
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright 2013 Broadcom Corporation.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= reset.o
+obj-y	+= clk-core.o
+obj-y	+= clk-bcm281xx.o
+obj-y	+= clk-sdio.o
+obj-y	+= clk-bsc.o
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
new file mode 100644
index 0000000..bc8a170
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
@@ -0,0 +1,523 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+/*
+ *
+ * bcm281xx-specific clock tables
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLOCK_1K		1000
+#define CLOCK_1M		(CLOCK_1K * 1000)
+
+/* declare a reference clock */
+#define DECLARE_REF_CLK(clk_name, clk_parent, clk_rate, clk_div) \
+static struct refclk clk_name = { \
+	.clk    =       { \
+		.name   =       #clk_name, \
+		.parent =       clk_parent, \
+		.rate   =       clk_rate, \
+		.div    =       clk_div, \
+		.ops    =       &ref_clk_ops, \
+	}, \
+}
+
+/*
+ * Reference clocks
+ */
+
+/* Declare a list of reference clocks */
+DECLARE_REF_CLK(ref_crystal,	0,		26  * CLOCK_1M,	1);
+DECLARE_REF_CLK(var_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(ref_104m,	&ref_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(ref_52m,	&ref_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(ref_13m,	&ref_52m.clk,	13  * CLOCK_1M,	4);
+DECLARE_REF_CLK(var_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(var_104m,	&var_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(var_52m,	&var_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(var_13m,	&var_52m.clk,	13  * CLOCK_1M,	4);
+
+struct refclk_lkup {
+	struct refclk *procclk;
+	const char *name;
+};
+
+/* Lookup table for string to clk tranlation */
+#define MKSTR(x) {&x, #x}
+static struct refclk_lkup refclk_str_tbl[] = {
+	MKSTR(ref_crystal), MKSTR(var_96m), MKSTR(ref_96m),
+	MKSTR(ref_312m), MKSTR(ref_104m), MKSTR(ref_52m),
+	MKSTR(ref_13m), MKSTR(var_312m), MKSTR(var_104m),
+	MKSTR(var_52m), MKSTR(var_13m),
+};
+
+int refclk_entries = sizeof(refclk_str_tbl)/sizeof(refclk_str_tbl[0]);
+
+/* convert ref clock string to clock structure pointer */
+struct refclk *refclk_str_to_clk(const char *name)
+{
+	int i;
+	struct refclk_lkup *tblp = refclk_str_tbl;
+	for (i = 0; i < refclk_entries; i++, tblp++) {
+		if (!(strcmp(name, tblp->name)))
+			return tblp->procclk;
+	}
+	return NULL;
+}
+
+/* frequency tables indexed by freq_id */
+unsigned long master_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	208 * CLOCK_1M,
+	312 * CLOCK_1M,
+	312 * CLOCK_1M
+};
+
+unsigned long master_ahb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_apb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	26 * CLOCK_1M,
+	39 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M
+};
+
+static struct bus_clk_data bsc1_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0458, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc2_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x045c, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc3_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0484, 16, 0, 1),
+};
+
+/* * Master CCU clocks */
+static struct peri_clk_data sdio1_data = {
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a2c, 0, 3),
+	.div		= DIVIDER(0x0a2c, 4, 14),
+	.trig		= TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a34, 0, 3),
+	.div		= DIVIDER(0x0a34, 4, 14),
+	.trig		= TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a30, 0, 3),
+	.div		= DIVIDER(0x0a30, 4, 14),
+	.trig		= TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data sdio1_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0358, 20, 4),
+};
+
+static struct peri_clk_data sdio2_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x035c, 20, 4),
+};
+
+static struct peri_clk_data sdio3_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0364, 20, 4),
+};
+
+static struct peri_clk_data sdio4_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0360, 20, 4),
+};
+
+static struct bus_clk_data sdio1_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio2_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x035c, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio3_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0364, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio4_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0360, 16, 0, 1),
+};
+
+/* * Slave CCU clocks */
+static struct peri_clk_data bsc1_data = {
+	.gate		= HW_SW_GATE(0x0458, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a64, 0, 3),
+	.trig		= TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+	.gate		= HW_SW_GATE(0x045c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a68, 0, 3),
+	.trig		= TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+	.gate		= HW_SW_GATE(0x0484, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a84, 0, 3),
+	.trig		= TRIGGER(0x0b00, 2),
+};
+
+/*
+ * CCU clocks
+ */
+
+static struct ccu_clock kpm_ccu_clk = {
+	.clk = {
+		.name = "kpm_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 1,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = master_axi_freq_tbl,
+};
+
+static struct ccu_clock kps_ccu_clk = {
+	.clk = {
+		.name = "kps_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 2,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.policy0_mask2_offset = 0x00000048,
+	.policy1_mask2_offset = 0x0000004c,
+	.policy2_mask2_offset = 0x00000050,
+	.policy3_mask2_offset = 0x00000054,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = slave_axi_freq_tbl,
+};
+
+/*
+ * Bus clocks
+ */
+
+/* KPM bus clocks */
+static struct bus_clock sdio1_ahb_clk = {
+	.clk = {
+		.name = "sdio1_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio1_ahb_data,
+};
+
+static struct bus_clock sdio2_ahb_clk = {
+	.clk = {
+		.name = "sdio2_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio2_ahb_data,
+};
+
+static struct bus_clock sdio3_ahb_clk = {
+	.clk = {
+		.name = "sdio3_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio3_ahb_data,
+};
+
+static struct bus_clock sdio4_ahb_clk = {
+	.clk = {
+		.name = "sdio4_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio4_ahb_data,
+};
+
+static struct bus_clock bsc1_apb_clk = {
+	.clk = {
+		.name = "bsc1_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc1_apb_data,
+};
+
+static struct bus_clock bsc2_apb_clk = {
+	.clk = {
+		.name = "bsc2_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc2_apb_data,
+};
+
+static struct bus_clock bsc3_apb_clk = {
+	.clk = {
+		.name = "bsc3_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc3_apb_data,
+};
+
+/* KPM peripheral */
+static struct peri_clock sdio1_clk = {
+	.clk = {
+		.name = "sdio1_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_data,
+};
+
+static struct peri_clock sdio2_clk = {
+	.clk = {
+		.name = "sdio2_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_data,
+};
+
+static struct peri_clock sdio3_clk = {
+	.clk = {
+		.name = "sdio3_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_data,
+};
+
+static struct peri_clock sdio4_clk = {
+	.clk = {
+		.name = "sdio4_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_data,
+};
+
+static struct peri_clock sdio1_sleep_clk = {
+	.clk = {
+		.name = "sdio1_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_sleep_data,
+};
+
+static struct peri_clock sdio2_sleep_clk = {
+	.clk = {
+		.name = "sdio2_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_sleep_data,
+};
+
+static struct peri_clock sdio3_sleep_clk = {
+	.clk = {
+		.name = "sdio3_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_sleep_data,
+};
+
+static struct peri_clock sdio4_sleep_clk = {
+	.clk = {
+		.name = "sdio4_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_sleep_data,
+};
+
+/* KPS peripheral clock */
+static struct peri_clock bsc1_clk = {
+	.clk = {
+		.name = "bsc1_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc1_data,
+};
+
+static struct peri_clock bsc2_clk = {
+	.clk = {
+		.name = "bsc2_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc2_data,
+};
+
+static struct peri_clock bsc3_clk = {
+	.clk = {
+		.name = "bsc3_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc3_data,
+};
+
+/* public table for registering clocks */
+struct clk_lookup arch_clk_tbl[] = {
+	/* Peripheral clocks */
+	CLK_LK(sdio1),
+	CLK_LK(sdio2),
+	CLK_LK(sdio3),
+	CLK_LK(sdio4),
+	CLK_LK(sdio1_sleep),
+	CLK_LK(sdio2_sleep),
+	CLK_LK(sdio3_sleep),
+	CLK_LK(sdio4_sleep),
+	CLK_LK(bsc1),
+	CLK_LK(bsc2),
+	CLK_LK(bsc3),
+	/* Bus clocks */
+	CLK_LK(sdio1_ahb),
+	CLK_LK(sdio2_ahb),
+	CLK_LK(sdio3_ahb),
+	CLK_LK(sdio4_ahb),
+	CLK_LK(bsc1_apb),
+	CLK_LK(bsc2_apb),
+	CLK_LK(bsc3_apb),
+};
+
+/* public array size */
+unsigned int arch_clk_tbl_array_size = ARRAY_SIZE(arch_clk_tbl);
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c b/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c
new file mode 100644
index 0000000..ba55d0a
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for a BSC/I2C port */
+int clk_bsc_enable(void *base)
+{
+	int ret;
+	char *bscstr, *apbstr;
+
+	switch ((u32) base) {
+	case PMU_BSC_BASE_ADDR:
+		/* PMU clock is always enabled */
+		return 0;
+	case BSC1_BASE_ADDR:
+		bscstr = "bsc1_clk";
+		apbstr = "bsc1_apb_clk";
+		break;
+	case BSC2_BASE_ADDR:
+		bscstr = "bsc2_clk";
+		apbstr = "bsc2_apb_clk";
+		break;
+	case BSC3_BASE_ADDR:
+		bscstr = "bsc3_clk";
+		apbstr = "bsc3_apb_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	/* Note that the bus clock must be enabled first */
+
+	ret = clk_get_and_enable(apbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(bscstr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-core.c b/arch/arm/cpu/armv7/bcm281xx/clk-core.c
new file mode 100644
index 0000000..d442583
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-core.c
@@ -0,0 +1,513 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+/*
+ *
+ * bcm281xx architecture clock framework
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <bitfield.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLK_WR_ACCESS_PASSWORD	0x00a5a501
+#define WR_ACCESS_OFFSET	0	/* common to all clock blocks */
+#define POLICY_CTL_GO		1	/* Load and refresh policy masks */
+#define POLICY_CTL_GO_ATL	4	/* Active Load */
+
+/* Helper function */
+int clk_get_and_enable(char *clkstr)
+{
+	int ret = 0;
+	struct clk *c;
+
+	debug("%s: %s\n", __func__, clkstr);
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Poll a register in a CCU's address space, returning when the
+ * specified bit in that register's value is set (or clear).  Delay
+ * a microsecond after each read of the register.  Returns true if
+ * successful, or false if we gave up trying.
+ *
+ * Caller must ensure the CCU lock is held.
+ */
+#define CLK_GATE_DELAY_USEC 2000
+static inline int wait_bit(void *base, u32 offset, u32 bit, bool want)
+{
+	unsigned int tries;
+	u32 bit_mask = 1 << bit;
+
+	for (tries = 0; tries < CLK_GATE_DELAY_USEC; tries++) {
+		u32 val;
+		bool bit_val;
+
+		val = readl(base + offset);
+		bit_val = (val & bit_mask) ? 1 : 0;
+		if (bit_val == want)
+			return 0;	/* success */
+		udelay(1);
+	}
+
+	debug("%s: timeout on addr 0x%p, waiting for bit %d to go to %d\n",
+	      __func__, base + offset, bit, want);
+
+	return -ETIMEDOUT;
+}
+
+/* Enable a peripheral clock */
+static int peri_clk_enable(struct clk *c, int enable)
+{
+	int ret = 0;
+	u32 reg;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	struct bcm_clk_gate *gate = &cd->gate;
+	void *base = (void *)c->ccu_clk_mgr_base;
+
+
+	debug("%s: %s\n", __func__, c->name);
+
+	clk_get_rate(c);	/* Make sure rate and sel are filled in */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	if (enable) {
+		debug("%s %s set rate %lu div %lu sel %d parent %lu\n",
+		      __func__, c->name, c->rate, c->div, c->sel,
+		      c->parent->rate);
+
+		/*
+		 * clkgate - only software controllable gates are
+		 * supported by u-boot which includes all clocks
+		 * that matter. This avoids bringing in a lot of extra
+		 * complexity as done in the kernel framework.
+		 */
+		if (gate_exists(gate)) {
+			reg = readl(base + cd->gate.offset);
+			reg |= (1 << cd->gate.en_bit);
+			writel(reg, base + cd->gate.offset);
+		}
+
+		/* div and pll select */
+		if (divider_exists(&cd->div)) {
+			reg = readl(base + cd->div.offset);
+			bitfield_replace(reg, cd->div.shift, cd->div.width,
+					 c->div - 1);
+			writel(reg, base + cd->div.offset);
+		}
+
+		/* frequency selector */
+		if (selector_exists(&cd->sel)) {
+			reg = readl(base + cd->sel.offset);
+			bitfield_replace(reg, cd->sel.shift, cd->sel.width,
+					 c->sel);
+			writel(reg, base + cd->sel.offset);
+		}
+
+		/* trigger */
+		if (trigger_exists(&cd->trig)) {
+			writel((1 << cd->trig.bit), base + cd->trig.offset);
+
+			/* wait for trigger status bit to go to 0 */
+			ret = wait_bit(base, cd->trig.offset, cd->trig.bit, 0);
+			if (ret)
+				return ret;
+		}
+
+		/* wait for running (status_bit = 1) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 1);
+		if (ret)
+			return ret;
+	} else {
+		debug("%s disable clock %s\n", __func__, c->name);
+
+		/* clkgate */
+		reg = readl(base + cd->gate.offset);
+		reg &= ~(1 << cd->gate.en_bit);
+		writel(reg, base + cd->gate.offset);
+
+		/* wait for stop (status_bit = 0) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 0);
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Set the rate of a peripheral clock */
+static int peri_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret = 0;
+	int i;
+	unsigned long diff;
+	unsigned long new_rate = 0, div = 1;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	const char **clock;
+
+	debug("%s: %s\n", __func__, c->name);
+	diff = rate;
+
+	i = 0;
+	for (clock = cd->clocks; *clock; clock++, i++) {
+		struct refclk *ref = refclk_str_to_clk(*clock);
+		if (!ref) {
+			printf("%s: Lookup of %s failed\n", __func__, *clock);
+			return -EINVAL;
+		}
+
+		/* round to the new rate */
+		div = ref->clk.rate / rate;
+		if (div == 0)
+			div = 1;
+
+		new_rate = ref->clk.rate / div;
+
+		/* get the min diff */
+		if (abs(new_rate - rate) < diff) {
+			diff = abs(new_rate - rate);
+			c->sel = i;
+			c->parent = &ref->clk;
+			c->rate = new_rate;
+			c->div = div;
+		}
+	}
+
+	debug("%s %s set rate %lu div %lu sel %d parent %lu\n", __func__,
+	      c->name, c->rate, c->div, c->sel, c->parent->rate);
+	return ret;
+}
+
+/* Get the rate of a peripheral clock */
+static unsigned long peri_clk_get_rate(struct clk *c)
+{
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int div = 1;
+	const char **clock;
+	struct refclk *ref;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (selector_exists(&cd->sel)) {
+		reg = readl(base + cd->sel.offset);
+		c->sel = bitfield_extract(reg, cd->sel.shift, cd->sel.width);
+	} else {
+		/*
+		 * For peri clocks that don't have a selector, the single
+		 * reference clock will always exist at index 0.
+		 */
+		c->sel = 0;
+	}
+
+	if (divider_exists(&cd->div)) {
+		reg = readl(base + cd->div.offset);
+		div = bitfield_extract(reg, cd->div.shift, cd->div.width);
+		div += 1;
+	}
+
+	clock = cd->clocks;
+	ref = refclk_str_to_clk(clock[c->sel]);
+	if (!ref) {
+		printf("%s: Can't lookup %s\n", __func__, clock[c->sel]);
+		return 0;
+	}
+
+	c->parent = &ref->clk;
+	c->div = div;
+	c->rate = c->parent->rate / c->div;
+	debug("%s parent rate %lu div %d sel %d rate %lu\n", __func__,
+	      c->parent->rate, div, c->sel, c->rate);
+
+	return c->rate;
+}
+
+/* Peripheral clock operations */
+struct clk_ops peri_clk_ops = {
+	.enable = peri_clk_enable,
+	.set_rate = peri_clk_set_rate,
+	.get_rate = peri_clk_get_rate,
+};
+
+/* Enable a CCU clock */
+static int ccu_clk_enable(struct clk *c, int enable)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!enable)
+		return -EINVAL;	/* CCU clock cannot shutdown */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* config enable for policy engine */
+	writel(1, base + ccu_clk->lvm_en_offset);
+
+	/* wait for bit to go to 0 */
+	ret = wait_bit(base, ccu_clk->lvm_en_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* freq ID */
+	if (!ccu_clk->freq_bit_shift)
+		ccu_clk->freq_bit_shift = 8;
+
+	/* Set frequency id for each of the 4 policies */
+	reg = ccu_clk->freq_id |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 2)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 3));
+	writel(reg, base + ccu_clk->policy_freq_offset);
+
+	/* enable all clock mask */
+	writel(0x7fffffff, base + ccu_clk->policy0_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy1_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy2_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy3_mask_offset);
+
+	if (ccu_clk->num_policy_masks == 2) {
+		writel(0x7fffffff, base + ccu_clk->policy0_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy1_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy2_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy3_mask2_offset);
+	}
+
+	/* start policy engine */
+	reg = readl(base + ccu_clk->policy_ctl_offset);
+	reg |= (POLICY_CTL_GO + POLICY_CTL_GO_ATL);
+	writel(reg, base + ccu_clk->policy_ctl_offset);
+
+	/* wait till started */
+	ret = wait_bit(base, ccu_clk->policy_ctl_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the CCU clock rate */
+static unsigned long ccu_clk_get_rate(struct clk *c)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	debug("%s: %s\n", __func__, c->name);
+	c->rate = ccu_clk->freq_tbl[ccu_clk->freq_id];
+	return c->rate;
+}
+
+/* CCU clock operations */
+struct clk_ops ccu_clk_ops = {
+	.enable = ccu_clk_enable,
+	.get_rate = ccu_clk_get_rate,
+};
+
+/* Enable a bus clock */
+static int bus_clk_enable(struct clk *c, int enable)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct bus_clk_data *cd = bus_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* enable gating */
+	reg = readl(base + cd->gate.offset);
+	if (!!(reg & (1 << cd->gate.status_bit)) == !!enable)
+		debug("%s already %s\n", c->name,
+		      enable ? "enabled" : "disabled");
+	else {
+		int want = (enable) ? 1 : 0;
+		reg |= (1 << cd->gate.hw_sw_sel_bit);
+
+		if (enable)
+			reg |= (1 << cd->gate.en_bit);
+		else
+			reg &= ~(1 << cd->gate.en_bit);
+
+		writel(reg, base + cd->gate.offset);
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit,
+			       want);
+		if (ret)
+			return ret;
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the rate of a bus clock */
+static unsigned long bus_clk_get_rate(struct clk *c)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct ccu_clock *ccu_clk;
+
+	debug("%s: %s\n", __func__, c->name);
+	ccu_clk = to_ccu_clk(c->parent);
+
+	c->rate = bus_clk->freq_tbl[ccu_clk->freq_id];
+	c->div = ccu_clk->freq_tbl[ccu_clk->freq_id] / c->rate;
+	return c->rate;
+}
+
+/* Bus clock operations */
+struct clk_ops bus_clk_ops = {
+	.enable = bus_clk_enable,
+	.get_rate = bus_clk_get_rate,
+};
+
+/* Enable a reference clock */
+static int ref_clk_enable(struct clk *c, int enable)
+{
+	debug("%s: %s\n", __func__, c->name);
+	return 0;
+}
+
+/* Reference clock operations */
+struct clk_ops ref_clk_ops = {
+	.enable = ref_clk_enable,
+};
+
+/*
+ * clk.h implementation follows
+ */
+
+/* Initialize the clock framework */
+int clk_init(void)
+{
+	debug("%s:\n", __func__);
+	return 0;
+}
+
+/* Get a clock handle, give a name string */
+struct clk *clk_get(const char *con_id)
+{
+	int i;
+	struct clk_lookup *clk_tblp;
+
+	debug("%s: %s\n", __func__, con_id);
+
+	clk_tblp = arch_clk_tbl;
+	for (i = 0; i < arch_clk_tbl_array_size; i++, clk_tblp++) {
+		if (clk_tblp->con_id) {
+			if (!con_id || strcmp(clk_tblp->con_id, con_id))
+				continue;
+			return clk_tblp->clk;
+		}
+	}
+	return NULL;
+}
+
+/* Enable a clock */
+int clk_enable(struct clk *c)
+{
+	int ret = 0;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return -1;
+
+	/* enable parent clock first */
+	if (c->parent)
+		ret = clk_enable(c->parent);
+
+	if (ret)
+		return ret;
+
+	if (!c->use_cnt) {
+		c->use_cnt++;
+		ret = c->ops->enable(c, 1);
+	}
+
+	return ret;
+}
+
+/* Disable a clock */
+void clk_disable(struct clk *c)
+{
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return;
+
+	if (c->use_cnt) {
+		c->use_cnt--;
+		c->ops->enable(c, 0);
+	}
+
+	/* disable parent */
+	if (c->parent)
+		clk_disable(c->parent);
+}
+
+/* Get the clock rate */
+unsigned long clk_get_rate(struct clk *c)
+{
+	unsigned long rate;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!c || !c->ops || !c->ops->get_rate)
+		return 0;
+
+	rate = c->ops->get_rate(c);
+	debug("%s: rate = %ld\n", __func__, rate);
+	return rate;
+}
+
+/* Set the clock rate */
+int clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret;
+
+	debug("%s: %s rate=%ld\n", __func__, c->name, rate);
+	if (!c || !c->ops || !c->ops->set_rate)
+		return -EINVAL;
+
+	if (c->use_cnt)
+		return -EINVAL;
+
+	ret = c->ops->set_rate(c, rate);
+
+	return ret;
+}
+
+/* Not required for this arch */
+/*
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+struct clk *clk_get_parent(struct clk *clk);
+*/
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-core.h b/arch/arm/cpu/armv7/bcm281xx/clk-core.h
new file mode 100644
index 0000000..882a297
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-core.h
@@ -0,0 +1,495 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <linux/stddef.h>
+
+#ifdef CONFIG_CLK_DEBUG
+#undef writel
+#undef readl
+static inline void writel(u32 val, void *addr)
+{
+	printf("Write [0x%p] = 0x%08x\n", addr, val);
+	*(u32 *)addr = val;
+}
+
+static inline u32 readl(void *addr)
+{
+	u32 val = *(u32 *)addr;
+	printf("Read  [0x%p] = 0x%08x\n", addr, val);
+	return val;
+}
+#endif
+
+struct clk;
+
+struct clk_lookup {
+	const char *dev_id;
+	const char *con_id;
+	struct clk *clk;
+};
+
+extern struct clk_lookup arch_clk_tbl[];
+extern unsigned int arch_clk_tbl_array_size;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @enable: enable/disable clock, see clk_enable() and clk_disable()
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ */
+struct clk_ops {
+	int (*enable) (struct clk *c, int enable);
+	int (*set_rate) (struct clk *c, unsigned long rate);
+	unsigned long (*get_rate) (struct clk *c);
+	unsigned long (*round_rate) (struct clk *c, unsigned long rate);
+	int (*set_parent) (struct clk *c, struct clk *parent);
+};
+
+struct clk {
+	struct clk *parent;
+	const char *name;
+	int use_cnt;
+	unsigned long rate;	/* in HZ */
+
+	/* programmable divider. 0 means fixed ratio to parent clock */
+	unsigned long div;
+
+	struct clk_src *src;
+	struct clk_ops *ops;
+
+	unsigned long ccu_clk_mgr_base;
+	int sel;
+};
+
+struct refclk *refclk_str_to_clk(const char *name);
+
+#define U8_MAX	((u8)~0U)
+#define U32_MAX	((u32)~0U)
+#define U64_MAX	((u64)~0U)
+
+/* The common clock framework uses u8 to represent a parent index */
+#define PARENT_COUNT_MAX	((u32)U8_MAX)
+
+#define BAD_CLK_INDEX		U8_MAX	/* Can't ever be valid */
+#define BAD_CLK_NAME		((const char *)-1)
+
+#define BAD_SCALED_DIV_VALUE	U64_MAX
+
+/*
+ * Utility macros for object flag management.  If possible, flags
+ * should be defined such that 0 is the desired default value.
+ */
+#define FLAG(type, flag)		BCM_CLK_ ## type ## _FLAGS_ ## flag
+#define FLAG_SET(obj, type, flag)	((obj)->flags |= FLAG(type, flag))
+#define FLAG_CLEAR(obj, type, flag)	((obj)->flags &= ~(FLAG(type, flag)))
+#define FLAG_FLIP(obj, type, flag)	((obj)->flags ^= FLAG(type, flag))
+#define FLAG_TEST(obj, type, flag)	(!!((obj)->flags & FLAG(type, flag)))
+
+/* Clock field state tests */
+
+#define gate_exists(gate)		FLAG_TEST(gate, GATE, EXISTS)
+#define gate_is_enabled(gate)		FLAG_TEST(gate, GATE, ENABLED)
+#define gate_is_hw_controllable(gate)	FLAG_TEST(gate, GATE, HW)
+#define gate_is_sw_controllable(gate)	FLAG_TEST(gate, GATE, SW)
+#define gate_is_sw_managed(gate)	FLAG_TEST(gate, GATE, SW_MANAGED)
+#define gate_is_no_disable(gate)	FLAG_TEST(gate, GATE, NO_DISABLE)
+
+#define gate_flip_enabled(gate)		FLAG_FLIP(gate, GATE, ENABLED)
+
+#define divider_exists(div)		FLAG_TEST(div, DIV, EXISTS)
+#define divider_is_fixed(div)		FLAG_TEST(div, DIV, FIXED)
+#define divider_has_fraction(div)	(!divider_is_fixed(div) && \
+						(div)->frac_width > 0)
+
+#define selector_exists(sel)		((sel)->width != 0)
+#define trigger_exists(trig)		FLAG_TEST(trig, TRIG, EXISTS)
+
+/* Clock type, used to tell common block what it's part of */
+enum bcm_clk_type {
+	bcm_clk_none,		/* undefined clock type */
+	bcm_clk_bus,
+	bcm_clk_core,
+	bcm_clk_peri
+};
+
+/*
+ * Gating control and status is managed by a 32-bit gate register.
+ *
+ * There are several types of gating available:
+ * - (no gate)
+ *     A clock with no gate is assumed to be always enabled.
+ * - hardware-only gating (auto-gating)
+ *     Enabling or disabling clocks with this type of gate is
+ *     managed automatically by the hardware.  Such clocks can be
+ *     considered by the software to be enabled.  The current status
+ *     of auto-gated clocks can be read from the gate status bit.
+ * - software-only gating
+ *     Auto-gating is not available for this type of clock.
+ *     Instead, software manages whether it's enabled by setting or
+ *     clearing the enable bit.  The current gate status of a gate
+ *     under software control can be read from the gate status bit.
+ *     To ensure a change to the gating status is complete, the
+ *     status bit can be polled to verify that the gate has entered
+ *     the desired state.
+ * - selectable hardware or software gating
+ *     Gating for this type of clock can be configured to be either
+ *     under software or hardware control.  Which type is in use is
+ *     determined by the hw_sw_sel bit of the gate register.
+ */
+struct bcm_clk_gate {
+	u32 offset;		/* gate register offset */
+	u32 status_bit;		/* 0: gate is disabled; 0: gatge is enabled */
+	u32 en_bit;		/* 0: disable; 1: enable */
+	u32 hw_sw_sel_bit;	/* 0: hardware gating; 1: software gating */
+	u32 flags;		/* BCM_CLK_GATE_FLAGS_* below */
+};
+
+/*
+ * Gate flags:
+ *   HW         means this gate can be auto-gated
+ *   SW         means the state of this gate can be software controlled
+ *   NO_DISABLE means this gate is (only) enabled if under software control
+ *   SW_MANAGED means the status of this gate is under software control
+ *   ENABLED    means this software-managed gate is *supposed* to be enabled
+ */
+#define BCM_CLK_GATE_FLAGS_EXISTS	((u32)1 << 0)	/* Gate is valid */
+#define BCM_CLK_GATE_FLAGS_HW		((u32)1 << 1)	/* Can auto-gate */
+#define BCM_CLK_GATE_FLAGS_SW		((u32)1 << 2)	/* Software control */
+#define BCM_CLK_GATE_FLAGS_NO_DISABLE	((u32)1 << 3)	/* HW or enabled */
+#define BCM_CLK_GATE_FLAGS_SW_MANAGED	((u32)1 << 4)	/* SW now in control */
+#define BCM_CLK_GATE_FLAGS_ENABLED	((u32)1 << 5)	/* If SW_MANAGED */
+
+/*
+ * Gate initialization macros.
+ *
+ * Any gate initially under software control will be enabled.
+ */
+
+/* A hardware/software gate initially under software control */
+#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)|	\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware/software gate initially under hardware control */
+#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware-or-enabled gate (enabled if not under hardware control) */
+#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS),	\
+	}
+
+/* A software-only gate */
+#define SW_ONLY_GATE(_offset, _status_bit, _en_bit)			\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)|		\
+			FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS),		\
+	}
+
+/* A hardware-only gate */
+#define HW_ONLY_GATE(_offset, _status_bit)				\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS),		\
+	}
+
+/*
+ * Each clock can have zero, one, or two dividers which change the
+ * output rate of the clock.  Each divider can be either fixed or
+ * variable.  If there are two dividers, they are the "pre-divider"
+ * and the "regular" or "downstream" divider.  If there is only one,
+ * there is no pre-divider.
+ *
+ * A fixed divider is any non-zero (positive) value, and it
+ * indicates how the input rate is affected by the divider.
+ *
+ * The value of a variable divider is maintained in a sub-field of a
+ * 32-bit divider register.  The position of the field in the
+ * register is defined by its offset and width.  The value recorded
+ * in this field is always 1 less than the value it represents.
+ *
+ * In addition, a variable divider can indicate that some subset
+ * of its bits represent a "fractional" part of the divider.  Such
+ * bits comprise the low-order portion of the divider field, and can
+ * be viewed as representing the portion of the divider that lies to
+ * the right of the decimal point.  Most variable dividers have zero
+ * fractional bits.  Variable dividers with non-zero fraction width
+ * still record a value 1 less than the value they represent; the
+ * added 1 does *not* affect the low-order bit in this case, it
+ * affects the bits above the fractional part only.  (Often in this
+ * code a divider field value is distinguished from the value it
+ * represents by referring to the latter as a "divisor".)
+ *
+ * In order to avoid dealing with fractions, divider arithmetic is
+ * performed using "scaled" values.  A scaled value is one that's
+ * been left-shifted by the fractional width of a divider.  Dividing
+ * a scaled value by a scaled divisor produces the desired quotient
+ * without loss of precision and without any other special handling
+ * for fractions.
+ *
+ * The recorded value of a variable divider can be modified.  To
+ * modify either divider (or both), a clock must be enabled (i.e.,
+ * using its gate).  In addition, a trigger register (described
+ * below) must be used to commit the change, and polled to verify
+ * the change is complete.
+ */
+struct bcm_clk_div {
+	union {
+		struct {	/* variable divider */
+			u32 offset;	/* divider register offset */
+			u32 shift;	/* field shift */
+			u32 width;	/* field width */
+			u32 frac_width;	/* field fraction width */
+
+			u64 scaled_div;	/* scaled divider value */
+		};
+		u32 fixed;	/* non-zero fixed divider value */
+	};
+	u32 flags;		/* BCM_CLK_DIV_FLAGS_* below */
+};
+
+/*
+ * Divider flags:
+ *   EXISTS means this divider exists
+ *   FIXED means it is a fixed-rate divider
+ */
+#define BCM_CLK_DIV_FLAGS_EXISTS	((u32)1 << 0)	/* Divider is valid */
+#define BCM_CLK_DIV_FLAGS_FIXED		((u32)1 << 1)	/* Fixed-value */
+
+/* Divider initialization macros */
+
+/* A fixed (non-zero) divider */
+#define FIXED_DIVIDER(_value)						\
+	{								\
+		.fixed = (_value),					\
+		.flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED),		\
+	}
+
+/* A divider with an integral divisor */
+#define DIVIDER(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/* A divider whose divisor has an integer and fractional part */
+#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width)		\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.frac_width = (_frac_width),				\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/*
+ * Clocks may have multiple "parent" clocks.  If there is more than
+ * one, a selector must be specified to define which of the parent
+ * clocks is currently in use.  The selected clock is indicated in a
+ * sub-field of a 32-bit selector register.  The range of
+ * representable selector values typically exceeds the number of
+ * available parent clocks.  Occasionally the reset value of a
+ * selector field is explicitly set to a (specific) value that does
+ * not correspond to a defined input clock.
+ *
+ * We register all known parent clocks with the common clock code
+ * using a packed array (i.e., no empty slots) of (parent) clock
+ * names, and refer to them later using indexes into that array.
+ * We maintain an array of selector values indexed by common clock
+ * index values in order to map between these common clock indexes
+ * and the selector values used by the hardware.
+ *
+ * Like dividers, a selector can be modified, but to do so a clock
+ * must be enabled, and a trigger must be used to commit the change.
+ */
+struct bcm_clk_sel {
+	u32 offset;		/* selector register offset */
+	u32 shift;		/* field shift */
+	u32 width;		/* field width */
+
+	u32 parent_count;	/* number of entries in parent_sel[] */
+	u32 *parent_sel;	/* array of parent selector values */
+	u8 clk_index;		/* current selected index in parent_sel[] */
+};
+
+/* Selector initialization macro */
+#define SELECTOR(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.clk_index = BAD_CLK_INDEX,				\
+	}
+
+/*
+ * Making changes to a variable divider or a selector for a clock
+ * requires the use of a trigger.  A trigger is defined by a single
+ * bit within a register.  To signal a change, a 1 is written into
+ * that bit.  To determine when the change has been completed, that
+ * trigger bit is polled; the read value will be 1 while the change
+ * is in progress, and 0 when it is complete.
+ *
+ * Occasionally a clock will have more than one trigger.  In this
+ * case, the "pre-trigger" will be used when changing a clock's
+ * selector and/or its pre-divider.
+ */
+struct bcm_clk_trig {
+	u32 offset;		/* trigger register offset */
+	u32 bit;		/* trigger bit */
+	u32 flags;		/* BCM_CLK_TRIG_FLAGS_* below */
+};
+
+/*
+ * Trigger flags:
+ *   EXISTS means this trigger exists
+ */
+#define BCM_CLK_TRIG_FLAGS_EXISTS	((u32)1 << 0)	/* Trigger is valid */
+
+/* Trigger initialization macro */
+#define TRIGGER(_offset, _bit)						\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+		.flags = FLAG(TRIG, EXISTS),				\
+	}
+
+struct bus_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct core_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct peri_clk_data {
+	struct bcm_clk_gate gate;
+	struct bcm_clk_trig pre_trig;
+	struct bcm_clk_div pre_div;
+	struct bcm_clk_trig trig;
+	struct bcm_clk_div div;
+	struct bcm_clk_sel sel;
+	const char *clocks[];	/* must be last; use CLOCKS() to declare */
+};
+#define CLOCKS(...)	{ __VA_ARGS__, NULL, }
+#define NO_CLOCKS	{ NULL, }	/* Must use of no parent clocks */
+
+struct refclk {
+	struct clk clk;
+};
+
+struct peri_clock {
+	struct clk clk;
+	struct peri_clk_data *data;
+};
+
+struct ccu_clock {
+	struct clk clk;
+
+	int num_policy_masks;
+	unsigned long policy_freq_offset;
+	int freq_bit_shift;	/* 8 for most CCUs */
+	unsigned long policy_ctl_offset;
+	unsigned long policy0_mask_offset;
+	unsigned long policy1_mask_offset;
+	unsigned long policy2_mask_offset;
+	unsigned long policy3_mask_offset;
+	unsigned long policy0_mask2_offset;
+	unsigned long policy1_mask2_offset;
+	unsigned long policy2_mask2_offset;
+	unsigned long policy3_mask2_offset;
+	unsigned long lvm_en_offset;
+
+	int freq_id;
+	unsigned long *freq_tbl;
+};
+
+struct bus_clock {
+	struct clk clk;
+	struct bus_clk_data *data;
+	unsigned long *freq_tbl;
+};
+
+struct ref_clock {
+	struct clk clk;
+};
+
+static inline int is_same_clock(struct clk *a, struct clk *b)
+{
+	return (a == b);
+}
+
+#define to_clk(p) (&((p)->clk))
+#define name_to_clk(name) (&((name##_clk).clk))
+/* declare a struct clk_lookup */
+#define CLK_LK(name) \
+{.con_id = __stringify(name##_clk), .clk = name_to_clk(name),}
+
+static inline struct refclk *to_refclk(struct clk *clock)
+{
+	return container_of(clock, struct refclk, clk);
+}
+
+static inline struct peri_clock *to_peri_clk(struct clk *clock)
+{
+	return container_of(clock, struct peri_clock, clk);
+}
+
+static inline struct ccu_clock *to_ccu_clk(struct clk *clock)
+{
+	return container_of(clock, struct ccu_clock, clk);
+}
+
+static inline struct bus_clock *to_bus_clk(struct clk *clock)
+{
+	return container_of(clock, struct bus_clock, clk);
+}
+
+static inline struct ref_clock *to_ref_clk(struct clk *clock)
+{
+	return container_of(clock, struct ref_clock, clk);
+}
+
+extern struct clk_ops peri_clk_ops;
+extern struct clk_ops ccu_clk_ops;
+extern struct clk_ops bus_clk_ops;
+extern struct clk_ops ref_clk_ops;
+
+extern int clk_get_and_enable(char *clkstr);
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c b/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c
new file mode 100644
index 0000000..49badcb
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for an SDIO port */
+int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	int ret;
+	struct clk *c;
+
+	char *clkstr;
+	char *slpstr;
+	char *ahbstr;
+
+	switch ((u32) base) {
+	case CONFIG_SYS_SDIO_BASE0:
+		clkstr = CONFIG_SYS_SDIO0 "_clk";
+		ahbstr = CONFIG_SYS_SDIO0 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO0 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE1:
+		clkstr = CONFIG_SYS_SDIO1 "_clk";
+		ahbstr = CONFIG_SYS_SDIO1 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO1 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE2:
+		clkstr = CONFIG_SYS_SDIO2 "_clk";
+		ahbstr = CONFIG_SYS_SDIO2 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO2 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE3:
+		clkstr = CONFIG_SYS_SDIO3 "_clk";
+		ahbstr = CONFIG_SYS_SDIO3 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO3 "_sleep_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	ret = clk_get_and_enable(ahbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(slpstr);
+	if (ret)
+		return ret;
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_set_rate(c, rate);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	*actual_ratep = rate;
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/bcm281xx/reset.c b/arch/arm/cpu/armv7/bcm281xx/reset.c
new file mode 100644
index 0000000..3beb0ed
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/reset.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sysmap.h>
+
+#define EN_MASK		0x08000000	/* Enable timer */
+#define SRSTEN_MASK	0x04000000	/* Enable soft reset */
+#define CLKS_SHIFT	20		/* Clock period shift */
+#define LD_SHIFT	0		/* Reload value shift */
+
+void reset_cpu(ulong ignored)
+{
+	/*
+	 * Set WD enable, RST enable,
+	 * 3.9 msec clock period (8), reload value (8*3.9ms)
+	 */
+	u32 reg = EN_MASK + SRSTEN_MASK + (8 << CLKS_SHIFT) + (8 << LD_SHIFT);
+	writel(reg, SECWD2_BASE_ADDR);
+
+	while (1)
+		;	/* loop forever till reset */
+}
diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk
index 38b7c40..6c82c3b 100644
--- a/arch/arm/cpu/armv7/config.mk
+++ b/arch/arm/cpu/armv7/config.mk
@@ -10,16 +10,9 @@
 PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5)
 PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7)
 
-# SEE README.arm-unaligned-accesses
+# On supported platforms we set the bit which causes us to trap on unaligned
+# memory access.  This is the opposite of what the compiler expects to be
+# the default so we must pass in -mno-unaligned-access so that it is aware
+# of our decision.
 PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
-PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
-
-ifneq ($(CONFIG_IMX_CONFIG),)
-ifdef CONFIG_SPL
-ifdef CONFIG_SPL_BUILD
-ALL-y	+= $(OBJTREE)/SPL
-endif
-else
-ALL-y	+= $(obj)u-boot.imx
-endif
-endif
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 5bde9d1..1fea4d6 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -26,7 +26,7 @@ struct clk_bit_info {
 };
 
 /* src_bit div_bit prediv_bit */
-static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = {
+static struct clk_bit_info clk_bit_info[] = {
 	{0,	0,	-1},
 	{4,	4,	-1},
 	{8,	8,	-1},
@@ -870,7 +870,6 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 	struct exynos4_clock *clk =
 		(struct exynos4_clock *)samsung_get_base_clock();
 	unsigned int addr;
-	unsigned int val;
 
 	/*
 	 * CLK_DIV_FSYS1
@@ -890,10 +889,8 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 		dev_index -= 2;
 	}
 
-	val = readl(addr);
-	val &= ~(0xff << ((dev_index << 4) + 8));
-	val |= (div & 0xff) << ((dev_index << 4) + 8);
-	writel(val, addr);
+	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
+			(div & 0xff) << ((dev_index << 4) + 8));
 }
 
 /* exynos4x12: set the mmc clock */
@@ -902,7 +899,6 @@ static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div)
 	struct exynos4x12_clock *clk =
 		(struct exynos4x12_clock *)samsung_get_base_clock();
 	unsigned int addr;
-	unsigned int val;
 
 	/*
 	 * CLK_DIV_FSYS1
@@ -917,10 +913,8 @@ static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div)
 		dev_index -= 2;
 	}
 
-	val = readl(addr);
-	val &= ~(0xff << ((dev_index << 4) + 8));
-	val |= (div & 0xff) << ((dev_index << 4) + 8);
-	writel(val, addr);
+	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
+			(div & 0xff) << ((dev_index << 4) + 8));
 }
 
 /* exynos5: set the mmc clock */
@@ -929,7 +923,6 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div)
 	struct exynos5_clock *clk =
 		(struct exynos5_clock *)samsung_get_base_clock();
 	unsigned int addr;
-	unsigned int val;
 
 	/*
 	 * CLK_DIV_FSYS1
@@ -944,10 +937,8 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div)
 		dev_index -= 2;
 	}
 
-	val = readl(addr);
-	val &= ~(0xff << ((dev_index << 4) + 8));
-	val |= (div & 0xff) << ((dev_index << 4) + 8);
-	writel(val, addr);
+	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
+			(div & 0xff) << ((dev_index << 4) + 8));
 }
 
 /* exynos5: set the mmc clock */
@@ -956,7 +947,7 @@ static void exynos5420_set_mmc_clk(int dev_index, unsigned int div)
 	struct exynos5420_clock *clk =
 		(struct exynos5420_clock *)samsung_get_base_clock();
 	unsigned int addr;
-	unsigned int val, shift;
+	unsigned int shift;
 
 	/*
 	 * CLK_DIV_FSYS1
@@ -967,10 +958,7 @@ static void exynos5420_set_mmc_clk(int dev_index, unsigned int div)
 	addr = (unsigned int)&clk->div_fsys1;
 	shift = dev_index * 10;
 
-	val = readl(addr);
-	val &= ~(0x3ff << shift);
-	val |= (div & 0x3ff) << shift;
-	writel(val, addr);
+	clrsetbits_le32(addr, 0x3ff << shift, (div & 0x3ff) << shift);
 }
 
 /* get_lcd_clk: return lcd clock frequency */
@@ -1061,7 +1049,6 @@ void exynos4_set_lcd_clk(void)
 {
 	struct exynos4_clock *clk =
 	    (struct exynos4_clock *)samsung_get_base_clock();
-	unsigned int cfg = 0;
 
 	/*
 	 * CLK_GATE_BLOCK
@@ -1073,9 +1060,7 @@ void exynos4_set_lcd_clk(void)
 	 * CLK_LCD1	[5]
 	 * CLK_GPS	[7]
 	 */
-	cfg = readl(&clk->gate_block);
-	cfg |= 1 << 4;
-	writel(cfg, &clk->gate_block);
+	setbits_le32(&clk->gate_block, 1 << 4);
 
 	/*
 	 * CLK_SRC_LCD0
@@ -1085,10 +1070,7 @@ void exynos4_set_lcd_clk(void)
 	 * MIPI0_SEL		[12:15]
 	 * set lcd0 src clock 0x6: SCLK_MPLL
 	 */
-	cfg = readl(&clk->src_lcd0);
-	cfg &= ~(0xf);
-	cfg |= 0x6;
-	writel(cfg, &clk->src_lcd0);
+	clrsetbits_le32(&clk->src_lcd0, 0xf, 0x6);
 
 	/*
 	 * CLK_GATE_IP_LCD0
@@ -1100,9 +1082,7 @@ void exynos4_set_lcd_clk(void)
 	 * CLK_PPMULCD0		[5]
 	 * Gating all clocks for FIMD0
 	 */
-	cfg = readl(&clk->gate_ip_lcd0);
-	cfg |= 1 << 0;
-	writel(cfg, &clk->gate_ip_lcd0);
+	setbits_le32(&clk->gate_ip_lcd0, 1 << 0);
 
 	/*
 	 * CLK_DIV_LCD0
@@ -1114,16 +1094,13 @@ void exynos4_set_lcd_clk(void)
 	 * MIPI0_PRE_RATIO	[23:20]
 	 * set fimd ratio
 	 */
-	cfg &= ~(0xf);
-	cfg |= 0x1;
-	writel(cfg, &clk->div_lcd0);
+	clrsetbits_le32(&clk->div_lcd0, 0xf, 0x1);
 }
 
 void exynos5_set_lcd_clk(void)
 {
 	struct exynos5_clock *clk =
 	    (struct exynos5_clock *)samsung_get_base_clock();
-	unsigned int cfg = 0;
 
 	/*
 	 * CLK_GATE_BLOCK
@@ -1135,9 +1112,7 @@ void exynos5_set_lcd_clk(void)
 	 * CLK_LCD1	[5]
 	 * CLK_GPS	[7]
 	 */
-	cfg = readl(&clk->gate_block);
-	cfg |= 1 << 4;
-	writel(cfg, &clk->gate_block);
+	setbits_le32(&clk->gate_block, 1 << 4);
 
 	/*
 	 * CLK_SRC_LCD0
@@ -1147,10 +1122,7 @@ void exynos5_set_lcd_clk(void)
 	 * MIPI0_SEL		[12:15]
 	 * set lcd0 src clock 0x6: SCLK_MPLL
 	 */
-	cfg = readl(&clk->src_disp1_0);
-	cfg &= ~(0xf);
-	cfg |= 0x6;
-	writel(cfg, &clk->src_disp1_0);
+	clrsetbits_le32(&clk->src_disp1_0, 0xf, 0x6);
 
 	/*
 	 * CLK_GATE_IP_LCD0
@@ -1162,9 +1134,7 @@ void exynos5_set_lcd_clk(void)
 	 * CLK_PPMULCD0		[5]
 	 * Gating all clocks for FIMD0
 	 */
-	cfg = readl(&clk->gate_ip_disp1);
-	cfg |= 1 << 0;
-	writel(cfg, &clk->gate_ip_disp1);
+	setbits_le32(&clk->gate_ip_disp1, 1 << 0);
 
 	/*
 	 * CLK_DIV_LCD0
@@ -1176,16 +1146,13 @@ void exynos5_set_lcd_clk(void)
 	 * MIPI0_PRE_RATIO	[23:20]
 	 * set fimd ratio
 	 */
-	cfg &= ~(0xf);
-	cfg |= 0x0;
-	writel(cfg, &clk->div_disp1_0);
+	clrsetbits_le32(&clk->div_disp1_0, 0xf, 0x0);
 }
 
 void exynos4_set_mipi_clk(void)
 {
 	struct exynos4_clock *clk =
 	    (struct exynos4_clock *)samsung_get_base_clock();
-	unsigned int cfg = 0;
 
 	/*
 	 * CLK_SRC_LCD0
@@ -1195,10 +1162,7 @@ void exynos4_set_mipi_clk(void)
 	 * MIPI0_SEL		[12:15]
 	 * set mipi0 src clock 0x6: SCLK_MPLL
 	 */
-	cfg = readl(&clk->src_lcd0);
-	cfg &= ~(0xf << 12);
-	cfg |= (0x6 << 12);
-	writel(cfg, &clk->src_lcd0);
+	clrsetbits_le32(&clk->src_lcd0, 0xf << 12, 0x6 << 12);
 
 	/*
 	 * CLK_SRC_MASK_LCD0
@@ -1208,9 +1172,7 @@ void exynos4_set_mipi_clk(void)
 	 * MIPI0_MASK		[12]
 	 * set src mask mipi0 0x1: Unmask
 	 */
-	cfg = readl(&clk->src_mask_lcd0);
-	cfg |= (0x1 << 12);
-	writel(cfg, &clk->src_mask_lcd0);
+	setbits_le32(&clk->src_mask_lcd0, 0x1 << 12);
 
 	/*
 	 * CLK_GATE_IP_LCD0
@@ -1222,9 +1184,7 @@ void exynos4_set_mipi_clk(void)
 	 * CLK_PPMULCD0		[5]
 	 * Gating all clocks for MIPI0
 	 */
-	cfg = readl(&clk->gate_ip_lcd0);
-	cfg |= 1 << 3;
-	writel(cfg, &clk->gate_ip_lcd0);
+	setbits_le32(&clk->gate_ip_lcd0, 1 << 3);
 
 	/*
 	 * CLK_DIV_LCD0
@@ -1236,9 +1196,7 @@ void exynos4_set_mipi_clk(void)
 	 * MIPI0_PRE_RATIO	[23:20]
 	 * set mipi ratio
 	 */
-	cfg &= ~(0xf << 16);
-	cfg |= (0x1 << 16);
-	writel(cfg, &clk->div_lcd0);
+	clrsetbits_le32(&clk->div_lcd0, 0xf << 16, 0x1 << 16);
 }
 
 /*
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 904177a..645c497 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -751,12 +751,7 @@ static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
 	if (err)
 		return PERIPH_ID_NONE;
 
-	/* check for invalid peripheral id */
-	if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0))
-		return cell[1];
-
-	debug(" invalid peripheral id\n");
-	return PERIPH_ID_NONE;
+	return cell[1];
 }
 
 int pinmux_decode_periph_id(const void *blob, int node)
diff --git a/arch/arm/cpu/armv7/kona-common/Makefile b/arch/arm/cpu/armv7/kona-common/Makefile
new file mode 100644
index 0000000..da225cb
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2013 Broadcom Corporation.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= s_init.o
+obj-y	+= hwinit-common.o
+obj-y	+= clk-stubs.o
diff --git a/arch/arm/cpu/armv7/kona-common/clk-stubs.c b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
new file mode 100644
index 0000000..338e0e4
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+
+/*
+ * These weak functions are available to kona architectures that don't
+ * require clock enables from the driver code.
+ */
+int __weak clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	return 0;
+}
+
+int __weak clk_bsc_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/kona-common/hwinit-common.c b/arch/arm/cpu/armv7/kona-common/hwinit-common.c
new file mode 100644
index 0000000..f8b1e06
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/hwinit-common.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/kona-common/s_init.c b/arch/arm/cpu/armv7/kona-common/s_init.c
new file mode 100644
index 0000000..6066a73
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/s_init.c
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Early system init. Currently empty.
+ */
+void s_init(void)
+{
+}
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 69fff32..52e0f4a 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -66,7 +66,18 @@ u32 spl_boot_device(void)
 
 u32 spl_boot_mode(void)
 {
-	return gd->arch.omap_boot_params.omap_bootmode;
+	u32 val = gd->arch.omap_boot_params.omap_bootmode;
+
+	if (val == MMCSD_MODE_RAW)
+		return MMCSD_MODE_RAW;
+	else if (val == MMCSD_MODE_FAT)
+		return MMCSD_MODE_FAT;
+	else
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+		return MMCSD_MODE_EMMCBOOT;
+#else
+		return MMCSD_MODE_UNDEFINED;
+#endif
 }
 
 void spl_board_init(void)
diff --git a/arch/arm/cpu/armv7/omap-common/config.mk b/arch/arm/cpu/armv7/omap-common/config.mk
deleted file mode 100644
index 3a36ab6..0000000
--- a/arch/arm/cpu/armv7/omap-common/config.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Make ARMv5 to allow more compilers to work, even though its v7a.
-PLATFORM_CPPFLAGS += -march=armv5
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index bf29510..ade744e 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -248,6 +248,7 @@ u32 get_device_type(void)
 				      (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT;
 }
 
+#if defined(CONFIG_DISPLAY_CPUINFO)
 /*
  * Print CPU information
  */
@@ -258,6 +259,8 @@ int print_cpuinfo(void)
 
 	return 0;
 }
+#endif
+
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
 {
diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c
index f5468c4..cad4fee 100644
--- a/arch/arm/cpu/armv7/omap-common/sata.c
+++ b/arch/arm/cpu/armv7/omap-common/sata.c
@@ -12,6 +12,7 @@
 #include <scsi.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sata.h>
+#include <sata.h>
 #include <asm/io.h>
 #include "pipe3-phy.h"
 
@@ -31,7 +32,7 @@ struct omap_pipe3 sata_phy = {
 	.dpll_map = dpll_map_sata,
 };
 
-int omap_sata_init(void)
+int init_sata(int dev)
 {
 	int ret;
 	u32 val;
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index 02aa129..745603d 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -39,7 +39,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/armv7/omap3/config.mk b/arch/arm/cpu/armv7/omap3/config.mk
index 1d6a57c..ad44d63 100644
--- a/arch/arm/cpu/armv7/omap3/config.mk
+++ b/arch/arm/cpu/armv7/omap3/config.mk
@@ -9,7 +9,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 ifdef CONFIG_SPL_BUILD
-ALL-y	+= $(OBJTREE)/MLO
+ALL-y	+= MLO
 else
-ALL-y	+= $(obj)u-boot.img
+ALL-y	+= u-boot.img
 endif
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 6f7261b..78577b1 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -17,9 +17,6 @@
 #include <asm/arch/clocks_omap3.h>
 #include <linux/linkage.h>
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
-
 #ifdef CONFIG_SPL_BUILD
 ENTRY(save_boot_params)
 	ldr	r4, =omap3_boot_device
diff --git a/arch/arm/cpu/armv7/omap4/config.mk b/arch/arm/cpu/armv7/omap4/config.mk
index 1d6a57c..ad44d63 100644
--- a/arch/arm/cpu/armv7/omap4/config.mk
+++ b/arch/arm/cpu/armv7/omap4/config.mk
@@ -9,7 +9,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 ifdef CONFIG_SPL_BUILD
-ALL-y	+= $(OBJTREE)/MLO
+ALL-y	+= MLO
 else
-ALL-y	+= $(obj)u-boot.img
+ALL-y	+= u-boot.img
 endif
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 4dec73e..029533c 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -172,6 +172,20 @@ struct dplls omap4430_dplls_es1 = {
 	.ddr = NULL
 };
 
+struct dplls omap4430_dplls_es20 = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_es2_1600mhz_ddr200mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
 struct dplls omap4430_dplls = {
 	.mpu = mpu_dpll_params_1200mhz,
 	.core = core_dpll_params_1600mhz,
@@ -413,6 +427,10 @@ void hw_data_init(void)
 	break;
 
 	case OMAP4430_ES2_0:
+	*dplls_data = &omap4430_dplls_es20;
+	*omap_vcores = &omap4430_volts;
+	break;
+
 	case OMAP4430_ES2_1:
 	case OMAP4430_ES2_2:
 	case OMAP4430_ES2_3:
diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk
index 2673af9..ef2725a 100644
--- a/arch/arm/cpu/armv7/omap5/config.mk
+++ b/arch/arm/cpu/armv7/omap5/config.mk
@@ -7,7 +7,7 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-ALL-y	+= $(OBJTREE)/MLO
+ALL-y	+= MLO
 else
-ALL-y	+= $(obj)u-boot.img
+ALL-y	+= u-boot.img
 endif
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index ff32807..7292161 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -432,7 +432,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_srcomp_code_latch		= 0x4A002E84,
 	.control_ddr_control_ext_0		= 0x4A002E88,
 	.control_padconf_core_base		= 0x4A003400,
-	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B24,
+	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B20,
 	.control_port_emif1_sdram_config	= 0x4AE0C110,
 	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
diff --git a/arch/arm/cpu/armv7/socfpga/config.mk b/arch/arm/cpu/armv7/socfpga/config.mk
index d33ab7d..3d18491 100644
--- a/arch/arm/cpu/armv7/socfpga/config.mk
+++ b/arch/arm/cpu/armv7/socfpga/config.mk
@@ -4,5 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 ifndef CONFIG_SPL_BUILD
-ALL-y	+= $(obj)u-boot.img
+ALL-y	+= u-boot.img
 endif
diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
index a7c9c9d..4282beb 100644
--- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
@@ -28,7 +28,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 
 	.bss : {
 		. = ALIGN(4);
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 5aac773..ac1e55a 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -70,29 +70,6 @@ _end_vect:
  *
  *************************************************************************/
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/armv7/tegra114/Makefile b/arch/arm/cpu/armv7/tegra114/Makefile
index 886b509..77e2319 100644
--- a/arch/arm/cpu/armv7/tegra114/Makefile
+++ b/arch/arm/cpu/armv7/tegra114/Makefile
@@ -17,4 +17,5 @@
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 
-obj- :=
+# necessary to create built-in.o
+obj- := __dummy__.o
diff --git a/arch/arm/cpu/armv7/tegra124/Makefile b/arch/arm/cpu/armv7/tegra124/Makefile
new file mode 100644
index 0000000..9478d44
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra124/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2013-2014
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+# necessary to create built-in.o
+obj- := __dummy__.o
diff --git a/arch/arm/cpu/armv7/tegra30/Makefile b/arch/arm/cpu/armv7/tegra30/Makefile
index 518d6d1..413eba1 100644
--- a/arch/arm/cpu/armv7/tegra30/Makefile
+++ b/arch/arm/cpu/armv7/tegra30/Makefile
@@ -17,4 +17,5 @@
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 
-obj- :=
+# necessary to create built-in.o
+obj- := __dummy__.o
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
index d382d49..3363a3c 100644
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ b/arch/arm/cpu/armv7/zynq/Makefile
@@ -12,3 +12,5 @@ obj-y	:= timer.o
 obj-y	+= cpu.o
 obj-y	+= ddrc.o
 obj-y	+= slcr.o
+obj-y	+= clk.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
diff --git a/arch/arm/cpu/armv7/zynq/clk.c b/arch/arm/cpu/armv7/zynq/clk.c
new file mode 100644
index 0000000..d2885dc
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/clk.c
@@ -0,0 +1,664 @@
+/*
+ * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <clk.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+/* Board oscillator frequency */
+#ifndef CONFIG_ZYNQ_PS_CLK_FREQ
+# define CONFIG_ZYNQ_PS_CLK_FREQ	33333333UL
+#endif
+
+/* Register bitfield defines */
+#define PLLCTRL_FBDIV_MASK	0x7f000
+#define PLLCTRL_FBDIV_SHIFT	12
+#define PLLCTRL_BPFORCE_MASK	(1 << 4)
+#define PLLCTRL_PWRDWN_MASK	2
+#define PLLCTRL_PWRDWN_SHIFT	1
+#define PLLCTRL_RESET_MASK	1
+#define PLLCTRL_RESET_SHIFT	0
+
+#define ZYNQ_CLK_MAXDIV		0x3f
+#define CLK_CTRL_DIV1_SHIFT	20
+#define CLK_CTRL_DIV1_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
+#define CLK_CTRL_DIV0_SHIFT	8
+#define CLK_CTRL_DIV0_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
+#define CLK_CTRL_SRCSEL_SHIFT	4
+#define CLK_CTRL_SRCSEL_MASK	(0x3 << CLK_CTRL_SRCSEL_SHIFT)
+
+#define CLK_CTRL_DIV2X_SHIFT	26
+#define CLK_CTRL_DIV2X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
+#define CLK_CTRL_DIV3X_SHIFT	20
+#define CLK_CTRL_DIV3X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
+
+#define ZYNQ_CLKMUX_SEL_0	0
+#define ZYNQ_CLKMUX_SEL_1	1
+#define ZYNQ_CLKMUX_SEL_2	2
+#define ZYNQ_CLKMUX_SEL_3	3
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct clk;
+
+/**
+ * struct clk_ops:
+ * @set_rate:	Function pointer to set_rate() implementation
+ * @get_rate:	Function pointer to get_rate() implementation
+ */
+struct clk_ops {
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	unsigned long (*get_rate)(struct clk *clk);
+};
+
+/**
+ * struct clk:
+ * @name:	Clock name
+ * @frequency:	Currenct frequency
+ * @parent:	Parent clock
+ * @flags:	Clock flags
+ * @reg:	Clock control register
+ * @ops:	Clock operations
+ */
+struct clk {
+	char		*name;
+	unsigned long	frequency;
+	enum zynq_clk	parent;
+	unsigned int	flags;
+	u32		*reg;
+	struct clk_ops	ops;
+};
+#define ZYNQ_CLK_FLAGS_HAS_2_DIVS	1
+
+static struct clk clks[clk_max];
+
+/**
+ * __zynq_clk_cpu_get_parent() - Decode clock multiplexer
+ * @srcsel:	Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static int __zynq_clk_cpu_get_parent(unsigned int srcsel)
+{
+	unsigned int ret;
+
+	switch (srcsel) {
+	case ZYNQ_CLKMUX_SEL_0:
+	case ZYNQ_CLKMUX_SEL_1:
+		ret = armpll_clk;
+		break;
+	case ZYNQ_CLKMUX_SEL_2:
+		ret = ddrpll_clk;
+		break;
+	case ZYNQ_CLKMUX_SEL_3:
+		ret = iopll_clk;
+		break;
+	default:
+		ret = armpll_clk;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * ddr2x_get_rate() - Get clock rate of DDR2x clock
+ * @clk:	Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr2x_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+/**
+ * ddr3x_get_rate() - Get clock rate of DDR3x clock
+ * @clk:	Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr3x_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+static void init_ddr_clocks(void)
+{
+	u32 div0, div1;
+	unsigned long prate = zynq_clk_get_rate(ddrpll_clk);
+	u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
+
+	/* DDR2x */
+	clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl;
+	clks[ddr2x_clk].parent = ddrpll_clk;
+	clks[ddr2x_clk].name = "ddr_2x";
+	clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]);
+	clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate;
+
+	/* DDR3x */
+	clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl;
+	clks[ddr3x_clk].parent = ddrpll_clk;
+	clks[ddr3x_clk].name = "ddr_3x";
+	clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]);
+	clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate;
+
+	/* DCI */
+	clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
+	div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+	clks[dci_clk].reg = &slcr_base->dci_clk_ctrl;
+	clks[dci_clk].parent = ddrpll_clk;
+	clks[dci_clk].frequency = DIV_ROUND_CLOSEST(
+			DIV_ROUND_CLOSEST(prate, div0), div1);
+	clks[dci_clk].name = "dci";
+
+	gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000;
+}
+
+static void init_cpu_clocks(void)
+{
+	int clk_621;
+	u32 reg, div, srcsel;
+	enum zynq_clk parent;
+
+	reg = readl(&slcr_base->arm_clk_ctrl);
+	clk_621 = readl(&slcr_base->clk_621_true) & 1;
+	div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	parent = __zynq_clk_cpu_get_parent(srcsel);
+
+	/* cpu clocks */
+	clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_6or4x_clk].parent = parent;
+	clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST(
+			zynq_clk_get_rate(parent), div);
+	clks[cpu_6or4x_clk].name = "cpu_6or4x";
+
+	clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_3or2x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2;
+	clks[cpu_3or2x_clk].name = "cpu_3or2x";
+
+	clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_2x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+			(2 + clk_621);
+	clks[cpu_2x_clk].name = "cpu_2x";
+
+	clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_1x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+			(4 + 2 * clk_621);
+	clks[cpu_1x_clk].name = "cpu_1x";
+}
+
+/**
+ * periph_calc_two_divs() - Calculate clock dividers
+ * @cur_rate:	Current clock rate
+ * @tgt_rate:	Target clock rate
+ * @prate:	Parent clock rate
+ * @div0:	First divider (output)
+ * @div1:	Second divider (output)
+ * Returns the actual clock rate possible.
+ *
+ * Calculates clock dividers for clocks with two 6-bit dividers.
+ */
+static unsigned long periph_calc_two_divs(unsigned long cur_rate,
+		unsigned long tgt_rate, unsigned long prate, u32 *div0,
+		u32 *div1)
+{
+	long err, best_err = (long)(~0UL >> 1);
+	unsigned long rate, best_rate = 0;
+	u32 d0, d1;
+
+	for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
+		for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
+			rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0),
+					d1);
+			err = abs(rate - tgt_rate);
+
+			if (err < best_err) {
+				*div0 = d0;
+				*div1 = d1;
+				best_err = err;
+				best_rate = rate;
+			}
+		}
+	}
+
+	return best_rate;
+}
+
+/**
+ * zynq_clk_periph_set_rate() - Set clock rate
+ * @clk:	Handle of the peripheral clock
+ * @rate:	New clock rate
+ * Sets the clock frequency of @clk to @rate. Returns zero on success.
+ */
+static int zynq_clk_periph_set_rate(struct clk *clk,
+		unsigned long rate)
+{
+	u32 ctrl, div0 = 0, div1 = 0;
+	unsigned long prate, new_rate, cur_rate = clk->frequency;
+
+	ctrl = readl(clk->reg);
+	prate = zynq_clk_get_rate(clk->parent);
+	ctrl &= ~CLK_CTRL_DIV0_MASK;
+
+	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) {
+		ctrl &= ~CLK_CTRL_DIV1_MASK;
+		new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0,
+				&div1);
+		ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
+	} else {
+		div0 = DIV_ROUND_CLOSEST(prate, rate);
+		div0 &= ZYNQ_CLK_MAXDIV;
+		new_rate = DIV_ROUND_CLOSEST(rate, div0);
+	}
+
+	/* write new divs to hardware */
+	ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
+	writel(ctrl, clk->reg);
+
+	/* update frequency in clk framework */
+	clk->frequency = new_rate;
+
+	return 0;
+}
+
+/**
+ * zynq_clk_periph_get_rate() - Get clock rate
+ * @clk:	Handle of the peripheral clock
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long zynq_clk_periph_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 div1 = 1;
+
+	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS)
+		div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+
+	/* a register value of zero == division by 1 */
+	if (!div0)
+		div0 = 1;
+	if (!div1)
+		div1 = 1;
+
+	return
+		DIV_ROUND_CLOSEST(
+			DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0),
+			div1);
+}
+
+/**
+ * __zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @srcsel:	Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel)
+{
+	switch (srcsel) {
+	case ZYNQ_CLKMUX_SEL_0:
+	case ZYNQ_CLKMUX_SEL_1:
+		return iopll_clk;
+	case ZYNQ_CLKMUX_SEL_2:
+		return armpll_clk;
+	case ZYNQ_CLKMUX_SEL_3:
+		return ddrpll_clk;
+	default:
+		return 0;
+	}
+}
+
+/**
+ * zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @clk:	Clock handle
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+
+	return __zynq_clk_periph_get_parent(srcsel);
+}
+
+/**
+ * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework
+ * @clk:	Pointer to struct clk for the clock
+ * @ctrl:	Clock control register
+ * @name:	PLL name
+ * @two_divs:	Indicates whether the clock features one or two dividers
+ */
+static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name,
+		bool two_divs)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	if (two_divs)
+		clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS;
+	clk->parent = zynq_clk_periph_get_parent(clk);
+	clk->frequency = zynq_clk_periph_get_rate(clk);
+	clk->ops.get_rate = zynq_clk_periph_get_rate;
+	clk->ops.set_rate = zynq_clk_periph_set_rate;
+
+	return 0;
+}
+
+static void init_periph_clocks(void)
+{
+	zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl,
+				     "gem0", 1);
+	zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl,
+				     "gem1", 1);
+
+	zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl,
+				     "smc", 0);
+
+	zynq_clk_register_periph_clk(&clks[lqspi_clk],
+				     &slcr_base->lqspi_clk_ctrl, "lqspi", 0);
+
+	zynq_clk_register_periph_clk(&clks[sdio0_clk],
+				     &slcr_base->sdio_clk_ctrl, "sdio0", 0);
+	zynq_clk_register_periph_clk(&clks[sdio1_clk],
+				     &slcr_base->sdio_clk_ctrl, "sdio1", 0);
+
+	zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl,
+				     "spi0", 0);
+	zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl,
+				     "spi1", 0);
+
+	zynq_clk_register_periph_clk(&clks[uart0_clk],
+				     &slcr_base->uart_clk_ctrl, "uart0", 0);
+	zynq_clk_register_periph_clk(&clks[uart1_clk],
+				     &slcr_base->uart_clk_ctrl, "uart1", 0);
+
+	zynq_clk_register_periph_clk(&clks[dbg_trc_clk],
+				     &slcr_base->dbg_clk_ctrl, "dbg_trc", 0);
+	zynq_clk_register_periph_clk(&clks[dbg_apb_clk],
+				     &slcr_base->dbg_clk_ctrl, "dbg_apb", 0);
+
+	zynq_clk_register_periph_clk(&clks[pcap_clk],
+				     &slcr_base->pcap_clk_ctrl, "pcap", 0);
+
+	zynq_clk_register_periph_clk(&clks[fclk0_clk],
+				     &slcr_base->fpga0_clk_ctrl, "fclk0", 1);
+	zynq_clk_register_periph_clk(&clks[fclk1_clk],
+				     &slcr_base->fpga1_clk_ctrl, "fclk1", 1);
+	zynq_clk_register_periph_clk(&clks[fclk2_clk],
+				     &slcr_base->fpga2_clk_ctrl, "fclk2", 1);
+	zynq_clk_register_periph_clk(&clks[fclk3_clk],
+				     &slcr_base->fpga3_clk_ctrl, "fclk3", 1);
+}
+
+/**
+ * zynq_clk_register_aper_clk() - Set up a APER clock with the framework
+ * @clk:	Pointer to struct clk for the clock
+ * @ctrl:	Clock control register
+ * @name:	PLL name
+ */
+static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	clk->parent = cpu_1x_clk;
+	clk->frequency = zynq_clk_get_rate(clk->parent);
+}
+
+static void init_aper_clocks(void)
+{
+	zynq_clk_register_aper_clk(&clks[usb0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "usb0_aper");
+	zynq_clk_register_aper_clk(&clks[usb1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "usb1_aper");
+
+	zynq_clk_register_aper_clk(&clks[gem0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gem0_aper");
+	zynq_clk_register_aper_clk(&clks[gem1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gem1_aper");
+
+	zynq_clk_register_aper_clk(&clks[sdio0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "sdio0_aper");
+	zynq_clk_register_aper_clk(&clks[sdio1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "sdio1_aper");
+
+	zynq_clk_register_aper_clk(&clks[spi0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "spi0_aper");
+	zynq_clk_register_aper_clk(&clks[spi1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "spi1_aper");
+
+	zynq_clk_register_aper_clk(&clks[can0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "can0_aper");
+	zynq_clk_register_aper_clk(&clks[can1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "can1_aper");
+
+	zynq_clk_register_aper_clk(&clks[i2c0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "i2c0_aper");
+	zynq_clk_register_aper_clk(&clks[i2c1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "i2c1_aper");
+
+	zynq_clk_register_aper_clk(&clks[uart0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "uart0_aper");
+	zynq_clk_register_aper_clk(&clks[uart1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "uart1_aper");
+
+	zynq_clk_register_aper_clk(&clks[gpio_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gpio_aper");
+
+	zynq_clk_register_aper_clk(&clks[lqspi_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "lqspi_aper");
+
+	zynq_clk_register_aper_clk(&clks[smc_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "smc_aper");
+}
+
+/**
+ * __zynq_clk_pll_get_rate() - Get PLL rate
+ * @addr:	Address of the PLL's control register
+ * Returns the current PLL output rate.
+ */
+static unsigned long __zynq_clk_pll_get_rate(u32 *addr)
+{
+	u32 reg, mul, bypass;
+
+	reg = readl(addr);
+	bypass = reg & PLLCTRL_BPFORCE_MASK;
+	if (bypass)
+		mul = 1;
+	else
+		mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
+
+	return CONFIG_ZYNQ_PS_CLK_FREQ * mul;
+}
+
+/**
+ * zynq_clk_pll_get_rate() - Get PLL rate
+ * @pll:	Handle of the PLL
+ * Returns the current clock rate of @pll.
+ */
+static unsigned long zynq_clk_pll_get_rate(struct clk *pll)
+{
+	return __zynq_clk_pll_get_rate(pll->reg);
+}
+
+/**
+ * zynq_clk_register_pll() - Set up a PLL with the framework
+ * @clk:	Pointer to struct clk for the PLL
+ * @ctrl:	PLL control register
+ * @name:	PLL name
+ * @prate:	PLL input clock rate
+ */
+static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name,
+		unsigned long prate)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	clk->frequency = zynq_clk_pll_get_rate(clk);
+	clk->ops.get_rate = zynq_clk_pll_get_rate;
+}
+
+/**
+ * clkid_2_register() - Get clock control register
+ * @id:	Clock identifier of one of the PLLs
+ * Returns the address of the requested PLL's control register.
+ */
+static u32 *clkid_2_register(enum zynq_clk id)
+{
+	switch (id) {
+	case armpll_clk:
+		return &slcr_base->arm_pll_ctrl;
+	case ddrpll_clk:
+		return &slcr_base->ddr_pll_ctrl;
+	case iopll_clk:
+		return &slcr_base->io_pll_ctrl;
+	default:
+		return &slcr_base->io_pll_ctrl;
+	}
+}
+
+/* API */
+/**
+ * zynq_clk_early_init() - Early init for the clock framework
+ *
+ * This function is called from before relocation and sets up the CPU clock
+ * frequency in the global data struct.
+ */
+void zynq_clk_early_init(void)
+{
+	u32 reg = readl(&slcr_base->arm_clk_ctrl);
+	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel);
+	u32 *pllreg = clkid_2_register(parent);
+	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+	if (!div)
+		div = 1;
+
+	gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * get_uart_clk() - Get UART input frequency
+ * @dev_index:	UART ID
+ * Returns UART input clock frequency in Hz.
+ *
+ * Compared to zynq_clk_get_rate() this function is designed to work before
+ * relocation and can be called when the serial UART is set up.
+ */
+unsigned long get_uart_clk(int dev_index)
+{
+	u32 reg = readl(&slcr_base->uart_clk_ctrl);
+	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
+	u32 *pllreg = clkid_2_register(parent);
+	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+	if (!div)
+		div = 1;
+
+	return DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * set_cpu_clk_info() - Initialize clock framework
+ * Always returns zero.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+	zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl,
+			      "armpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+	zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl,
+			      "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+	zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl,
+			      "iopll", CONFIG_ZYNQ_PS_CLK_FREQ);
+
+	init_ddr_clocks();
+	init_cpu_clocks();
+	init_periph_clocks();
+	init_aper_clocks();
+
+	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+	gd->bd->bi_dsp_freq = 0;
+
+	return 0;
+}
+
+/**
+ * zynq_clk_get_rate() - Get clock rate
+ * @clk:	Clock identifier
+ * Returns the current clock rate of @clk on success or zero for an invalid
+ * clock id.
+ */
+unsigned long zynq_clk_get_rate(enum zynq_clk clk)
+{
+	if (clk < 0 || clk >= clk_max)
+		return 0;
+
+	return clks[clk].frequency;
+}
+
+/**
+ * zynq_clk_set_rate() - Set clock rate
+ * @clk:	Clock identifier
+ * @rate:	Requested clock rate
+ * Passes on the return value from the clock's set_rate() function or negative
+ * errno.
+ */
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate)
+{
+	if (clk < 0 || clk >= clk_max)
+		return -ENODEV;
+
+	if (clks[clk].ops.set_rate)
+		return clks[clk].ops.set_rate(&clks[clk], rate);
+
+	return -ENXIO;
+}
+
+/**
+ * zynq_clk_get_name() - Get clock name
+ * @clk:	Clock identifier
+ * Returns the name of @clk.
+ */
+const char *zynq_clk_get_name(enum zynq_clk clk)
+{
+	return clks[clk].name;
+}
+
+/**
+ * soc_clk_dump() - Print clock frequencies
+ * Returns zero on success
+ *
+ * Implementation for the clk dump command.
+ */
+int soc_clk_dump(void)
+{
+	int i;
+
+	printf("clk\t\tfrequency\n");
+	for (i = 0; i < clk_max; i++) {
+		const char *name = zynq_clk_get_name(i);
+		if (name)
+			printf("%10s%20lu\n", name, zynq_clk_get_rate(i));
+	}
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 9af340e..7626b5c 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -6,6 +6,7 @@
  */
 #include <common.h>
 #include <asm/io.h>
+#include <asm/arch/clk.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware.h>
 
@@ -16,7 +17,7 @@ void lowlevel_init(void)
 int arch_cpu_init(void)
 {
 	zynq_slcr_unlock();
-
+#ifndef CONFIG_SPL_BUILD
 	/* Device config APB, unlock the PCAP */
 	writel(0x757BDF0D, &devcfg_base->unlock);
 	writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
@@ -34,7 +35,8 @@ int arch_cpu_init(void)
 	/* Urgent write, ports S2/S3 */
 	writel(0xC, &slcr_base->ddr_urgent);
 #endif
-
+#endif
+	zynq_clk_early_init();
 	zynq_slcr_lock();
 
 	return 0;
@@ -46,3 +48,11 @@ void reset_cpu(ulong addr)
 	while (1)
 		;
 }
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index b4c11c3..d7c1882 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -8,6 +8,7 @@
 #include <asm/io.h>
 #include <malloc.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
 
 #define SLCR_LOCK_MAGIC		0x767B
 #define SLCR_UNLOCK_MAGIC	0xDF0D
@@ -50,8 +51,10 @@ void zynq_slcr_cpu_reset(void)
 }
 
 /* Setup clk for network */
-void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
+void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
 {
+	int ret;
+
 	zynq_slcr_unlock();
 
 	if (gem_id > 1) {
@@ -59,16 +62,16 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
 		goto out;
 	}
 
+	ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
+	if (ret)
+		goto out;
+
 	if (gem_id) {
-		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
-		writel(clk, &slcr_base->gem1_clk_ctrl);
 		/* Configure GEM_RCLK_CTRL */
-		writel(rclk, &slcr_base->gem1_rclk_ctrl);
+		writel(1, &slcr_base->gem1_rclk_ctrl);
 	} else {
-		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
-		writel(clk, &slcr_base->gem0_clk_ctrl);
 		/* Configure GEM_RCLK_CTRL */
-		writel(rclk, &slcr_base->gem0_rclk_ctrl);
+		writel(1, &slcr_base->gem0_rclk_ctrl);
 	}
 	udelay(100000);
 out:
diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
new file mode 100644
index 0000000..fcad762
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/spl.c
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2014 Xilinx, Inc. Michal Simek
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+	ps7_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	/* Set global data pointer. */
+	gd = &gdata;
+
+	preloader_console_init();
+	arch_cpu_init();
+	board_init_r(NULL, 0);
+}
+
+u32 spl_boot_device(void)
+{
+	u32 mode;
+
+	switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case ZYNQ_BM_QSPI:
+		puts("qspi boot\n");
+		mode = BOOT_DEVICE_SPI;
+		break;
+#endif
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case ZYNQ_BM_SD:
+		puts("mmc boot\n");
+		mode = BOOT_DEVICE_MMC1;
+		break;
+#endif
+	default:
+		puts("Unsupported boot mode selected\n");
+		hang();
+	}
+
+	return mode;
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(void)
+{
+	return MMCSD_MODE_FAT;
+}
+#endif
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* boot linux */
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
index 2be253c..303dbcf 100644
--- a/arch/arm/cpu/armv7/zynq/timer.c
+++ b/arch/arm/cpu/armv7/zynq/timer.c
@@ -29,6 +29,7 @@
 #include <div64.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -48,7 +49,6 @@ static struct scu_timer *timer_base =
 
 #define TIMER_LOAD_VAL 0xFFFFFFFF
 #define TIMER_PRESCALE 255
-#define TIMER_TICK_HZ  (CONFIG_CPU_FREQ_HZ / 2 / TIMER_PRESCALE)
 
 int timer_init(void)
 {
@@ -56,6 +56,8 @@ int timer_init(void)
 			(TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
 			SCUTIMER_CONTROL_ENABLE_MASK;
 
+	gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
+
 	/* Load the timer counter register */
 	writel(0xFFFFFFFF, &timer_base->load);
 
@@ -69,7 +71,7 @@ int timer_init(void)
 
 	/* Reset time */
 	gd->arch.lastinc = readl(&timer_base->counter) /
-					(TIMER_TICK_HZ / CONFIG_SYS_HZ);
+				(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
 	gd->arch.tbl = 0;
 
 	return 0;
@@ -83,14 +85,15 @@ ulong get_timer_masked(void)
 {
 	ulong now;
 
-	now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ);
+	now = readl(&timer_base->counter) /
+			(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
 
 	if (gd->arch.lastinc >= now) {
 		/* Normal mode */
 		gd->arch.tbl += gd->arch.lastinc - now;
 	} else {
 		/* We have an overflow ... */
-		gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now;
+		gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now + 1;
 	}
 	gd->arch.lastinc = now;
 
@@ -107,7 +110,8 @@ void __udelay(unsigned long usec)
 	if (usec == 0)
 		return;
 
-	countticks = lldiv(TIMER_TICK_HZ * usec, 1000000);
+	countticks = lldiv(((unsigned long long)gd->arch.timer_rate_hz * usec),
+			   1000000);
 
 	/* decrementing timer */
 	timeend = readl(&timer_base->counter) - countticks;
diff --git a/arch/arm/cpu/armv7/zynq/u-boot-spl.lds b/arch/arm/cpu/armv7/zynq/u-boot-spl.lds
new file mode 100644
index 0000000..0c4501e
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/u-boot-spl.lds
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2014 Xilinx, Inc. Michal Simek
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = ALIGN(4);
+	.text :
+	{
+		__image_copy_start = .;
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	} > .sram
+
+	. = ALIGN(4);
+	.rodata : {
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	} > .sram
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	} > .sram
+
+	. = ALIGN(4);
+
+	. = .;
+
+	__image_copy_end = .;
+
+	_end = .;
+
+	/* Move BSS section to RAM because of FAT */
+	.bss (NOLOAD) : {
+		__bss_start = .;
+		*(.bss*)
+		 . = ALIGN(4);
+		__bss_end = .;
+	} > .sdram
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds
index 676ae2c..f2a5965 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/armv7/zynq/u-boot.lds
@@ -1,11 +1,13 @@
 /*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm", "elf32-bigarm")
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 ENTRY(_start)
 SECTIONS
@@ -16,7 +18,7 @@ SECTIONS
 	.text :
 	{
 		*(.__image_copy_start)
-		arch/arm/cpu/ixp/start.o(.text*)
+		CPUDIR/start.o (.text*)
 		*(.text*)
 	}
 
@@ -58,7 +60,12 @@ SECTIONS
 		*(.__rel_dyn_end)
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 /*
  * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
@@ -75,17 +82,23 @@ SECTIONS
 		 . = ALIGN(4);
 		 __bss_limit = .;
 	}
+
 	.bss_end __bss_limit (OVERLAY) : {
 		KEEP(*(.__bss_end));
 	}
 
-	.dynsym _end : { *(.dynsym) }
-	.dynbss : { *(.dynbss) }
-	.dynstr : { *(.dynstr*) }
-	.dynamic : { *(.dynamic*) }
-	.hash : { *(.hash*) }
-	.plt : { *(.plt*) }
-	.interp : { *(.interp*) }
-	.gnu : { *(.gnu*) }
-	.ARM.exidx : { *(.ARM.exidx*) }
+	/*
+	 * Zynq needs to discard more sections because the user
+	 * is expected to pass this image on to tools for boot.bin
+	 * generation that require them to be dropped.
+	 */
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynbss*) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }
diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
index 027a68c..f5b9559 100644
--- a/arch/arm/cpu/armv8/config.mk
+++ b/arch/arm/cpu/armv8/config.mk
@@ -6,10 +6,7 @@
 #
 PLATFORM_RELFLAGS += -fno-common -ffixed-x18
 
-# SEE README.arm-unaligned-accesses
-PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
-PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
-
 PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a)
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
 PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8)
 PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
diff --git a/arch/arm/cpu/at91-common/u-boot-spl.lds b/arch/arm/cpu/at91-common/u-boot-spl.lds
index 038335d..57ac1eb 100644
--- a/arch/arm/cpu/at91-common/u-boot-spl.lds
+++ b/arch/arm/cpu/at91-common/u-boot-spl.lds
@@ -37,7 +37,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/ixp/Makefile b/arch/arm/cpu/ixp/Makefile
deleted file mode 100644
index 4e66523..0000000
--- a/arch/arm/cpu/ixp/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-extra-y	= start.o
-
-obj-y	+= cpu.o
-obj-$(CONFIG_USE_IRQ)	+= interrupts.o
-obj-y	+= timer.o
diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk
deleted file mode 100644
index 894861f..0000000
--- a/arch/arm/cpu/ixp/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-BIG_ENDIAN = y
-
-PLATFORM_RELFLAGS += -mbig-endian
-
-PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100
-
-PLATFORM_LDFLAGS += -EB
-USE_PRIVATE_LIBGCC = yes
diff --git a/arch/arm/cpu/ixp/cpu.c b/arch/arm/cpu/ixp/cpu.c
deleted file mode 100644
index 4387c18..0000000
--- a/arch/arm/cpu/ixp/cpu.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/arch/ixp425.h>
-#include <asm/system.h>
-
-static void cache_flush(void);
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo (void)
-{
-	unsigned long id;
-	int speed = 0;
-
-	asm ("mrc p15, 0, %0, c0, c0, 0":"=r" (id));
-
-	puts("CPU:   Intel IXP425 at ");
-	switch ((id & 0x000003f0) >> 4) {
-	case 0x1c:
-		speed = 533;
-		break;
-
-	case 0x1d:
-		speed = 400;
-		break;
-
-	case 0x1f:
-		speed = 266;
-		break;
-	}
-
-	if (speed)
-		printf("%d MHz\n", speed);
-	else
-		puts("unknown revision\n");
-
-	return 0;
-}
-#endif /* CONFIG_DISPLAY_CPUINFO */
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * just disable everything that can disturb booting linux
-	 */
-
-	disable_interrupts ();
-
-	/* turn off I-cache */
-	icache_disable();
-	dcache_disable();
-
-	/* flush I-cache */
-	cache_flush();
-
-	return 0;
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
-	unsigned long i = 0;
-
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-}
-
-/* FIXME */
-/*
-void pci_init(void)
-{
-	return;
-}
-*/
-
-int cpu_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_IXP4XX_NPE
-	npe_initialize(bis);
-#endif
-	return 0;
-}
diff --git a/arch/arm/cpu/ixp/interrupts.c b/arch/arm/cpu/ixp/interrupts.c
deleted file mode 100644
index 7694c6a..0000000
--- a/arch/arm/cpu/ixp/interrupts.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/ixp425.h>
-#include <asm/proc-armv/ptrace.h>
-
-struct _irq_handler {
-	void                *m_data;
-	void (*m_func)( void *data);
-};
-
-static struct _irq_handler IRQ_HANDLER[N_IRQS];
-
-static void default_isr(void *data)
-{
-	printf("default_isr():  called for IRQ %d, Interrupt Status=%x PR=%x\n",
-	       (int)data, *IXP425_ICIP, *IXP425_ICIH);
-}
-
-static int next_irq(void)
-{
-	return (((*IXP425_ICIH & 0x000000fc) >> 2) - 1);
-}
-
-void do_irq (struct pt_regs *pt_regs)
-{
-	int irq = next_irq();
-
-	IRQ_HANDLER[irq].m_func(IRQ_HANDLER[irq].m_data);
-}
-
-void irq_install_handler (int irq, interrupt_handler_t handle_irq, void *data)
-{
-	if (irq >= N_IRQS || !handle_irq)
-		return;
-
-	IRQ_HANDLER[irq].m_data = data;
-	IRQ_HANDLER[irq].m_func = handle_irq;
-}
-
-int arch_interrupt_init (void)
-{
-	int i;
-
-	/* install default interrupt handlers */
-	for (i = 0; i < N_IRQS; i++)
-		irq_install_handler(i, default_isr, (void *)i);
-
-	/* configure interrupts for IRQ mode */
-	*IXP425_ICLR = 0x00000000;
-
-	return (0);
-}
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
deleted file mode 100644
index 82c868a..0000000
--- a/arch/arm/cpu/ixp/start.S
+++ /dev/null
@@ -1,430 +0,0 @@
-/* vi: set ts=8 sw=8 noet: */
-/*
- *  u-boot - Startup Code for XScale IXP
- *
- * Copyright (C) 2003	Kyle Harris <kharris@nexus-tech.net>
- *
- * Based on startup code example contained in the
- * Intel IXP4xx Programmer's Guide and past u-boot Start.S
- * samples.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-#include <asm/arch/ixp425.h>
-
-#define MMU_Control_M  0x001    /* Enable MMU */
-#define MMU_Control_A  0x002    /* Enable address alignment faults */
-#define MMU_Control_C  0x004    /* Enable cache */
-#define MMU_Control_W  0x008    /* Enable write-buffer */
-#define MMU_Control_P  0x010    /* Compatability: 32 bit code */
-#define MMU_Control_D  0x020    /* Compatability: 32 bit data */
-#define MMU_Control_L  0x040    /* Compatability: */
-#define MMU_Control_B  0x080    /* Enable Big-Endian */
-#define MMU_Control_S  0x100    /* Enable system protection */
-#define MMU_Control_R  0x200    /* Enable ROM protection */
-#define MMU_Control_I  0x1000   /* Enable Instruction cache */
-#define MMU_Control_X  0x2000   /* Set interrupt vectors at 0xFFFF0000 */
-#define MMU_Control_Init (MMU_Control_P|MMU_Control_D|MMU_Control_L)
-
-
-/*
- * Macro definitions
- */
-	/* Delay a bit */
-	.macro DELAY_FOR cycles, reg0
-	ldr     \reg0, =\cycles
-	subs    \reg0, \reg0, #1
-	subne   pc,  pc, #0xc
-	.endm
-
-	/* wait for coprocessor write complete */
-	.macro CPWAIT reg
-	mrc  p15,0,\reg,c2,c0,0
-	mov  \reg,\reg
-	sub  pc,pc,#4
-	.endm
-
-.globl _start
-_start:
-	ldr	pc, _reset
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_reset:                 .word reset
-_undefined_instruction: .word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * - relocate armboot to ram
- * - setup stack
- * - jump to second stage
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
-	/* disable mmu, set big-endian */
-	mov	r0, #0xf8
-	mcr	p15, 0, r0, c1, c0, 0
-	CPWAIT  r0
-
-	/* invalidate I & D caches & BTB */
-	mcr	p15, 0, r0, c7, c7, 0
-	CPWAIT	r0
-
-	/* invalidate I & Data TLB */
-	mcr	p15, 0, r0, c8, c7, 0
-	CPWAIT r0
-
-	/* drain write and fill buffers */
-	mcr	p15, 0, r0, c7, c10, 4
-	CPWAIT	r0
-
-	/* disable write buffer coalescing */
-	mrc	p15, 0, r0, c1, c0, 1
-	orr	r0, r0, #1
-	mcr	p15, 0, r0, c1, c0, 1
-	CPWAIT	r0
-
-	/* set EXP CS0 to the optimum timing */
-	ldr	r1, =CONFIG_SYS_EXP_CS0
-	ldr     r2, =IXP425_EXP_CS0
-	str     r1, [r2]
-
-	/* make sure flash is visible at 0 */
-	mov	r1, #CONFIG_SYS_SDR_CONFIG
-	ldr     r2, =IXP425_SDR_CONFIG
-	str     r1, [r2]
-
-	/* disable refresh cycles */
-	mov	r1, #0
-	ldr     r3, =IXP425_SDR_REFRESH
-	str	r1, [r3]
-
-	/* send nop command */
-	mov	r1, #3
-	ldr	r4, =IXP425_SDR_IR
-	str	r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* set SDRAM internal refresh val */
-	ldr	r1, =CONFIG_SYS_SDRAM_REFRESH_CNT
-	str     r1, [r3]
-	DELAY_FOR 0x4000, r0
-
-	/* send precharge-all command to close all open banks */
-	mov     r1, #2
-	str     r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* provide 8 auto-refresh cycles */
-	mov     r1, #4
-	mov     r5, #8
-111:    str	r1, [r4]
-	DELAY_FOR 0x100, r0
-	subs	r5, r5, #1
-	bne	111b
-
-	/* set mode register in sdram */
-	mov	r1, #CONFIG_SYS_SDR_MODE_CONFIG
-	str	r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* send normal operation command */
-	mov	r1, #6
-	str	r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* invalidate I & D caches & BTB */
-	mcr	p15, 0, r0, c7, c7, 0
-	CPWAIT	r0
-
-	/* invalidate I & Data TLB */
-	mcr	p15, 0, r0, c8, c7, 0
-	CPWAIT r0
-
-	/* drain write and fill buffers */
-	mcr	p15, 0, r0, c7, c10, 4
-	CPWAIT	r0
-
-	/* remove flash mirror at 0x00000000 */
-	ldr	r2, =IXP425_EXP_CFG0
-	ldr     r1, [r2]
-	bic     r1, r1, #0x80000000
-	str     r1, [r2]
-
-	/* invalidate I & Data TLB */
-	mcr	p15, 0, r0, c8, c7, 0
-	CPWAIT r0
-
-	/* enable I cache */
-	mrc     p15, 0, r0, c1, c0, 0
-	orr     r0, r0, #MMU_Control_I
-	mcr     p15, 0, r0, c1, c0, 0
-	CPWAIT  r0
-
-	mrs	r0,cpsr			/* set the cpu to SVC32 mode	    */
-	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
-	orr	r0,r0,#0x13
-	msr	cpsr,r0
-
-	bl	_main
-
-/*------------------------------------------------------------------------------*/
-
-	.globl	c_runtime_cpu_setup
-c_runtime_cpu_setup:
-
-	bx	lr
-
-/****************************************************************************/
-/*									    */
-/* Interrupt handling							    */
-/*									    */
-/****************************************************************************/
-
-/* IRQ stack frame							    */
-
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-
-	/* use bad_save_user_regs for abort/prefetch/undef/swi ...	    */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			/* Calling r0-r12	    */
-	add	r8, sp, #S_PC
-
-	ldr	r2, IRQ_STACK_START_IN
-	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
-	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r4}			/* save sp_SVC, lr_SVC, pc, cpsr, old_r */
-	mov	r0, sp
-	.endm
-
-
-	/* use irq_save_user_regs / irq_restore_user_regs for		     */
-	/* IRQ/FIQ handling						     */
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			/* Calling r0-r12	     */
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			/* Calling SP, LR	     */
-	str	lr, [r8, #0]			/* Save calling PC	     */
-	mrs	r6, spsr
-	str	r6, [r8, #4]			/* Save CPSR		     */
-	str	r0, [r8, #8]			/* Save OLD_R0		     */
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str	lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	msr	spsr_c, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-
-/****************************************************************************/
-/*									    */
-/* exception handlers							    */
-/*									    */
-/****************************************************************************/
-
-	.align	5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	irq_save_user_regs		/* someone ought to write a more    */
-	bl	do_fiq			/* effiction fiq_save_user_regs	    */
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
-
-/****************************************************************************/
-/*                                                                          */
-/* Reset function: Use Watchdog to reset                                    */
-/*                                                                          */
-/****************************************************************************/
-
-	.align	5
-.globl reset_cpu
-
-reset_cpu:
-	ldr	r1, =0x482e
-	ldr     r2, =IXP425_OSWK
-	str     r1, [r2]
-	ldr	r1, =0x0fff
-	ldr     r2, =IXP425_OSWT
-	str     r1, [r2]
-	ldr	r1, =0x5
-	ldr     r2, =IXP425_OSWE
-	str     r1, [r2]
-	b	reset_endless
-
-reset_endless:
-	b	reset_endless
diff --git a/arch/arm/cpu/ixp/timer.c b/arch/arm/cpu/ixp/timer.c
deleted file mode 100644
index 38e2e28..0000000
--- a/arch/arm/cpu/ixp/timer.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * (C) Copyright 2010
- * Michael Schwingen, michael@schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#include <div64.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * The IXP42x time-stamp timer runs at 2*OSC_IN (66.666MHz when using a
- * 33.333MHz crystal).
- */
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	tick *= CONFIG_SYS_HZ;
-	do_div(tick, CONFIG_IXP425_TIMER_CLK);
-	return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
-	time *= CONFIG_IXP425_TIMER_CLK;
-	do_div(time, CONFIG_SYS_HZ);
-	return time;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
-	us = us * CONFIG_IXP425_TIMER_CLK + 999999;
-	do_div(us, 1000000);
-	return us;
-}
-
-unsigned long long get_ticks(void)
-{
-	ulong now = readl(IXP425_OSTS_B);
-
-	if (readl(IXP425_OSST) & IXP425_OSST_TIMER_TS_PEND) {
-		/* rollover of timestamp timer register */
-		gd->arch.timestamp += (0xFFFFFFFF - gd->arch.lastinc) + now + 1;
-		writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
-	} else {
-		/* move stamp forward with absolut diff ticks */
-		gd->arch.timestamp += (now - gd->arch.lastinc);
-	}
-	gd->arch.lastinc = now;
-	return gd->arch.timestamp;
-}
-
-
-void reset_timer_masked(void)
-{
-	/* capture current timestamp counter */
-	gd->arch.lastinc = readl(IXP425_OSTS_B);
-	/* start "advancing" time stamp from 0 */
-	gd->arch.timestamp = 0;
-}
-
-ulong get_timer_masked(void)
-{
-	return tick_to_time(get_ticks());
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay(unsigned long usec)
-{
-	unsigned long long tmp;
-
-	tmp = get_ticks() + us_to_tick(usec);
-
-	while (get_ticks() < tmp)
-		;
-}
-
-int timer_init(void)
-{
-	writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
-	return 0;
-}
diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk
index 986b11b..525f5d3 100644
--- a/arch/arm/cpu/pxa/config.mk
+++ b/arch/arm/cpu/pxa/config.mk
@@ -18,5 +18,5 @@ PLATFORM_CPPFLAGS += -mcpu=xscale
 #
 
 #ifdef CONFIG_SPL_BUILD
-OBJCFLAGS += -j .text.0 -j .text.1
+OBJCOPYFLAGS += -j .text.0 -j .text.1
 #endif
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index d8fb812..ae0d13c 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -84,32 +84,6 @@ _end_vect:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -316,7 +290,6 @@ cpu_init_crit:
 #ifdef CONFIG_SPL_BUILD
 	.align	5
 do_hang:
-	ldr	sp, _TEXT_BASE			/* use 32 words about stack */
 	bl	hang				/* hang and never return */
 #else	/* !CONFIG_SPL_BUILD */
 	.align	5
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 27bcda5..bf80937 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -56,32 +56,6 @@ _fiq:			.word fiq
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/tegra-common/Makefile b/arch/arm/cpu/tegra-common/Makefile
index edfc1a8..34d5734 100644
--- a/arch/arm/cpu/tegra-common/Makefile
+++ b/arch/arm/cpu/tegra-common/Makefile
@@ -8,4 +8,5 @@
 #
 
 obj-y += lowlevel_init.o
-obj-y	+= ap.o board.o sys_info.o clock.o cache.o
+obj-y	+= ap.o board.o clock.o cache.o
+obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index 60d71a6..91d70da 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -1,5 +1,5 @@
 /*
-* (C) Copyright 2010-2011
+* (C) Copyright 2010-2014
 * NVIDIA Corporation <www.nvidia.com>
 *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -27,7 +27,7 @@ int tegra_get_chip(void)
 	/*
 	 * This is undocumented, Chip ID is bits 15:8 of the register
 	 * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
-	 * Tegra30, and 0x35 for T114.
+	 * Tegra30, 0x35 for T114, and 0x40 for Tegra124.
 	 */
 	rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
 	debug("%s: CHIPID is 0x%02X\n", __func__, rev);
@@ -72,6 +72,7 @@ int tegra_get_chip_sku(void)
 		case SKU_ID_T33:
 		case SKU_ID_T30:
 		case SKU_ID_TM30MQS_P_A3:
+		default:
 			return TEGRA_SOC_T30;
 		}
 		break;
@@ -79,10 +80,19 @@ int tegra_get_chip_sku(void)
 		switch (sku_id) {
 		case SKU_ID_T114_ENG:
 		case SKU_ID_T114_1:
+		default:
 			return TEGRA_SOC_T114;
 		}
 		break;
+	case CHIPID_TEGRA124:
+		switch (sku_id) {
+		case SKU_ID_T124_ENG:
+		default:
+			return TEGRA_SOC_T124;
+		}
+		break;
 	}
+
 	/* unknown chip/sku id */
 	printf("%s: ERROR: UNKNOWN CHIP/SKU ID COMBO (0x%02X/0x%02X)\n",
 		__func__, chip_id, sku_id);
@@ -117,8 +127,8 @@ static u32 get_odmdata(void)
 	 * ODMDATA is stored in the BCT in IRAM by the BootROM.
 	 * The BCT start and size are stored in the BIT in IRAM.
 	 * Read the data @ bct_start + (bct_size - 12). This works
-	 * on T20 and T30 BCTs, which are locked down. If this changes
-	 * in new chips (T114, etc.), we can revisit this algorithm.
+	 * on BCTs for currently supported SoCs, which are locked down.
+	 * If this changes in new chips, we can revisit this algorithm.
 	 */
 
 	u32 bct_start, odmdata;
diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
index d9cbda8..6a6faf4 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -1,5 +1,5 @@
 /*
- *  (C) Copyright 2010,2011
+ *  (C) Copyright 2010-2014
  *  NVIDIA Corporation <www.nvidia.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -109,12 +109,18 @@ static int uart_configs[] = {
 	-1,
 	-1,
 	-1,
-#else	/* Tegra114 */
+#elif defined(CONFIG_TEGRA114)
 	-1,
 	-1,
 	-1,
 	FUNCMUX_UART4_GMI,	/* UARTD */
 	-1,
+#else	/* Tegra124 */
+	FUNCMUX_UART1_KBC,	/* UARTA */
+	-1,
+	-1,
+	FUNCMUX_UART4_GPIO,	/* UARTD */
+	-1,
 #endif
 };
 
diff --git a/arch/arm/cpu/tegra-common/cache.c b/arch/arm/cpu/tegra-common/cache.c
index 48e9319..94f5bce 100644
--- a/arch/arm/cpu/tegra-common/cache.c
+++ b/arch/arm/cpu/tegra-common/cache.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -23,8 +23,6 @@
 
 void config_cache(void)
 {
-	struct apb_misc_gp_ctlr *gp =
-		(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
 	u32 reg = 0;
 
 	/* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */
@@ -33,10 +31,10 @@ void config_cache(void)
 		"orr r0, r0, #0x41\n"
 		"mcr p15, 0, r0, c1, c0, 1\n");
 
-	/* Currently, only T114 needs this L2 cache change to boot Linux */
-	reg = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK);
-	if (reg != (CHIPID_TEGRA114 << HIDREV_CHIPID_SHIFT))
+	/* Currently, only Tegra114+ needs this L2 cache change to boot Linux */
+	if (tegra_get_chip() < CHIPID_TEGRA114)
 		return;
+
 	/*
 	 * Systems with an architectural L2 cache must not use the PL310.
 	 * Config L2CTLR here for a data RAM latency of 3 cycles.
diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c
index 268fb91..11c7435 100644
--- a/arch/arm/cpu/tegra-common/clock.c
+++ b/arch/arm/cpu/tegra-common/clock.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -142,8 +142,8 @@ void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
 
 	value = readl(reg);
 
-	value &= ~OUT_CLK_SOURCE_MASK;
-	value |= source << OUT_CLK_SOURCE_SHIFT;
+	value &= ~OUT_CLK_SOURCE_31_30_MASK;
+	value |= source << OUT_CLK_SOURCE_31_30_SHIFT;
 
 	value &= ~OUT_CLK_DIVISOR_MASK;
 	value |= divisor << OUT_CLK_DIVISOR_SHIFT;
@@ -155,8 +155,8 @@ void clock_ll_set_source(enum periph_id periph_id, unsigned source)
 {
 	u32 *reg = get_periph_source_reg(periph_id);
 
-	clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
-			source << OUT_CLK_SOURCE_SHIFT);
+	clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
+			source << OUT_CLK_SOURCE_31_30_SHIFT);
 }
 
 /**
@@ -304,13 +304,27 @@ static int adjust_periph_pll(enum periph_id periph_id, int source,
 	/* work out the source clock and set it */
 	if (source < 0)
 		return -1;
-	if (mux_bits == 4) {
-		clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
-			source << OUT_CLK_SOURCE4_SHIFT);
-	} else {
-		clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
-			source << OUT_CLK_SOURCE_SHIFT);
+
+	switch (mux_bits) {
+	case MASK_BITS_31_30:
+		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
+				source << OUT_CLK_SOURCE_31_30_SHIFT);
+		break;
+
+	case MASK_BITS_31_29:
+		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_29_MASK,
+				source << OUT_CLK_SOURCE_31_29_SHIFT);
+		break;
+
+	case MASK_BITS_31_28:
+		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_28_MASK,
+				source << OUT_CLK_SOURCE_31_28_SHIFT);
+		break;
+
+	default:
+		return -1;
 	}
+
 	udelay(2);
 	return 0;
 }
@@ -561,3 +575,95 @@ void clock_init(void)
 	/* Do any special system timer/TSC setup */
 	arch_timer_init();
 }
+
+static void set_avp_clock_source(u32 src)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 val;
+
+	val = (src << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) |
+		(src << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) |
+		(src << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) |
+		(src << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) |
+		(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
+	writel(val, &clkrst->crc_sclk_brst_pol);
+	udelay(3);
+}
+
+/*
+ * This function is useful on Tegra30, and any later SoCs that have compatible
+ * PLLP configuration registers.
+ */
+void tegra30_set_up_pllp(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	/*
+	 * Based on the Tegra TRM, the system clock (which is the AVP clock) can
+	 * run up to 275MHz. On power on, the default sytem clock source is set
+	 * to PLLP_OUT0. This function sets PLLP's (hence PLLP_OUT0's) rate to
+	 * 408MHz which is beyond system clock's upper limit.
+	 *
+	 * The fix is to set the system clock to CLK_M before initializing PLLP,
+	 * and then switch back to PLLP_OUT4, which has an appropriate divider
+	 * configured, after PLLP has been configured
+	 */
+	set_avp_clock_source(SCLK_SOURCE_CLKM);
+
+	/*
+	 * PLLP output frequency set to 408Mhz
+	 * PLLC output frequency set to 228Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+
+	/* Set PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */
+
+	/* OUT1, 2 */
+	/* Assert RSTN before enable */
+	reg = PLLP_OUT2_RSTN_EN | PLLP_OUT1_RSTN_EN;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
+	/* Set divisor and reenable */
+	reg = (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO)
+		| PLLP_OUT2_OVR | PLLP_OUT2_CLKEN | PLLP_OUT2_RSTN_DIS
+		| (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
+		| PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
+
+	/* OUT3, 4 */
+	/* Assert RSTN before enable */
+	reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
+	/* Set divisor and reenable */
+	reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
+		| PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS
+		| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
+		| PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
+
+	set_avp_clock_source(SCLK_SOURCE_PLLP_OUT4);
+}
diff --git a/arch/arm/cpu/tegra-common/sys_info.c b/arch/arm/cpu/tegra-common/sys_info.c
index dc8a2e4..de20325 100644
--- a/arch/arm/cpu/tegra-common/sys_info.c
+++ b/arch/arm/cpu/tegra-common/sys_info.c
@@ -8,7 +8,6 @@
 #include <common.h>
 #include <linux/ctype.h>
 
-#ifdef CONFIG_DISPLAY_CPUINFO
 void upstring(char *s)
 {
 	while (*s) {
@@ -30,4 +29,3 @@ int print_cpuinfo(void)
 	/* TBD: Add printf of major/minor rev info, stepping, etc. */
 	return 0;
 }
-#endif	/* CONFIG_DISPLAY_CPUINFO */
diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c
index 5c4305a..d5194e1 100644
--- a/arch/arm/cpu/tegra114-common/clock.c
+++ b/arch/arm/cpu/tegra114-common/clock.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -61,12 +61,6 @@ enum {
 	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
 };
 
-enum {
-	MASK_BITS_31_30	= 2,	/* num of bits used to specify clock source */
-	MASK_BITS_31_29,
-	MASK_BITS_29_28,
-};
-
 /*
  * Clock source mux for each clock type. This just converts our enum into
  * a list of mux sources for use by the code.
@@ -109,7 +103,7 @@ static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
 		MASK_BITS_31_29},
 	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
-		MASK_BITS_29_28}
+		MASK_BITS_31_28}
 };
 
 /*
@@ -610,26 +604,24 @@ void clock_early_init(void)
 	struct clk_rst_ctlr *clkrst =
 		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
 
+	tegra30_set_up_pllp();
+
 	/*
-	 * PLLP output frequency set to 408Mhz
 	 * PLLC output frequency set to 600Mhz
 	 * PLLD output frequency set to 925Mhz
 	 */
 	switch (clock_get_osc_freq()) {
 	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
-		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
 		break;
 
 	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
-		clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
 		break;
 
 	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
-		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
 		break;
diff --git a/arch/arm/cpu/tegra124-common/Makefile b/arch/arm/cpu/tegra124-common/Makefile
new file mode 100644
index 0000000..ff77992
--- /dev/null
+++ b/arch/arm/cpu/tegra124-common/Makefile
@@ -0,0 +1,10 @@
+#
+# (C) Copyright 2013-2014
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= clock.o
+obj-y	+= funcmux.o
+obj-y	+= pinmux.o
diff --git a/arch/arm/cpu/tegra124-common/clock.c b/arch/arm/cpu/tegra124-common/clock.c
new file mode 100644
index 0000000..7394363
--- /dev/null
+++ b/arch/arm/cpu/tegra124-common/clock.c
@@ -0,0 +1,826 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/* Tegra124 Clock control functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sysctr.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra124 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PDCT,
+	CLOCK_TYPE_ACPT,
+	CLOCK_TYPE_ASPTE,
+	CLOCK_TYPE_PMDACD2T,
+	CLOCK_TYPE_PCST,
+
+	CLOCK_TYPE_PC2CC3M,
+	CLOCK_TYPE_PC2CC3S_T,
+	CLOCK_TYPE_PC2CC3M_T,
+	CLOCK_TYPE_PC2CC3M_T16,	/* PC2CC3M_T, but w/16-bit divisor (I2C) */
+	CLOCK_TYPE_MC2CC3P_A,
+	CLOCK_TYPE_M,
+	CLOCK_TYPE_MCPTM2C2C3,
+	CLOCK_TYPE_PC2CC3T_S,
+	CLOCK_TYPE_AC2CC3P_TS2,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
+};
+
+enum {
+	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ *  The extra column in each clock source array is used to store the mask
+ *  bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
+		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(MEMORY),	CLK(DISPLAY),	CLK(AUDIO),
+		CLK(CGENERAL),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_28},
+
+	/* Additional clock types on Tegra114+ */
+	/* CLOCK_TYPE_PC2CC3M */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3S_T */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(SFROM32KHZ), CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3M_T */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_MC2CC3P_A */
+	{ CLK(MEMORY),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(PERIPH),	CLK(NONE),	CLK(AUDIO),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_M */
+	{ CLK(MEMORY),		CLK(NONE),	CLK(NONE),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	/* CLOCK_TYPE_MCPTM2C2C3 */
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(MEMORY2),	CLK(CGENERAL2),	CLK(CGENERAL3),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3T_S */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(OSC),	CLK(NONE),	CLK(SFROM32KHZ), CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_AC2CC3P_TS2 */
+	{ CLK(AUDIO),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(PERIPH),	CLK(NONE),	CLK(OSC),	CLK(SRC2),
+		MASK_BITS_31_29},
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PC2CC3M),
+	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_05h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x08 */
+	TYPE(PERIPHC_08h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_I2C5,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_0bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_0ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PMDACD2T),
+
+	/* 0x10 */
+	TYPE(PERIPHC_10h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_11h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_13h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_16h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_17h,	CLOCK_TYPE_NONE),
+
+	/* 0x18 */
+	TYPE(PERIPHC_18h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_1Bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_1Ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_HSI,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_21h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_22h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_HDMI,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_24h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_25h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPTM2C2C3),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_29h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI_SENSOR,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_2bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_2ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_I2S0,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_DTV,	CLOCK_TYPE_NONE),
+
+	/* 0x38 */
+	TYPE(PERIPHC_38h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_39h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_3ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_3bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_MSENC,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_TSEC,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_3eh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_OSC,	CLOCK_TYPE_NONE),
+
+	/* 0x40 */
+	TYPE(PERIPHC_40h,	CLOCK_TYPE_NONE),	/* start with 0x3b0 */
+	TYPE(PERIPHC_MSELECT,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_TSENSOR,	CLOCK_TYPE_PC2CC3T_S),
+	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x48 */
+	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_49h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DAM0,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_DAM1,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_DAM2,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+	/* 0x50 */
+	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_52h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_55h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_56h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_57h,	CLOCK_TYPE_NONE),
+
+	/* 0x58 */
+	TYPE(PERIPHC_58h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_59h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_5ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_5bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_5fh,	CLOCK_TYPE_NONE),
+
+	/* 0x60 */
+	TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_FS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_SS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILAB,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILCD,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILE,	CLOCK_TYPE_NONE),
+
+	/* 0x68 */
+	TYPE(PERIPHC_DSIA_LP,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DSIB_LP,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_ENTROPY,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DVFS_REF,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DVFS_SOC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_ADX0,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_AMX0,	CLOCK_TYPE_NONE),
+
+	/* 0x70 */
+	TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SOC_THERM,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_72h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_73h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_74h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_75h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C6,	CLOCK_TYPE_PC2CC3M_T16),
+
+	/* 0x78 */
+	TYPE(PERIPHC_78h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_EMC_DLL,	CLOCK_TYPE_MCPTM2C2C3),
+	TYPE(PERIPHC_HDMI_AUDIO, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CLK72MHZ,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_ADX1,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_AMX1,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_VIC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_7Fh,	CLOCK_TYPE_NONE),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(COP),
+	NONE(TRIGSYS),
+	NONE(ISPB),
+	NONE(RESERVED4),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,	/* and vfir 0x68 */
+
+	/* 8 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_I2S1,
+	PERIPHC_I2C1,
+	NONE(RESERVED13),
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 16 */
+	NONE(TCW),
+	PERIPHC_PWM,
+	PERIPHC_I2S2,
+	NONE(RESERVED19),
+	PERIPHC_VI,
+	NONE(RESERVED21),
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 24 */
+	NONE(RESERVED24),
+	NONE(RESERVED25),
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	PERIPHC_I2S0,
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(RESERVED36),
+	NONE(STAT_MON),
+	NONE(RESERVED38),
+	NONE(FUSE),
+
+	/* 40 */
+	NONE(KFUSE),
+	PERIPHC_SBC1,		/* SBCx = SPIx */
+	PERIPHC_NOR,
+	NONE(RESERVED43),
+	PERIPHC_SBC2,
+	NONE(XIO),
+	PERIPHC_SBC3,
+	PERIPHC_I2C5,
+
+	/* 48 */
+	NONE(DSI),
+	NONE(RESERVED49),
+	PERIPHC_HSI,
+	PERIPHC_HDMI,
+	NONE(CSI),
+	NONE(RESERVED53),
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 56 */
+	NONE(MIPI_CAL),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	NONE(RESERVED60),
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	NONE(RESERVED64),
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SBC4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 72 */
+	NONE(AFI),
+	PERIPHC_CSITE,
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(LA),
+	NONE(TRACECLKIN),
+	NONE(SOC_THERM),
+	NONE(DTV),
+
+	/* 80 */
+	NONE(RESERVED80),
+	PERIPHC_I2CSLOW,
+	NONE(DSIB),
+	PERIPHC_TSEC,
+	NONE(RESERVED84),
+	NONE(RESERVED85),
+	NONE(RESERVED86),
+	NONE(EMUCIF),
+
+	/* 88 */
+	NONE(RESERVED88),
+	NONE(XUSB_HOST),
+	NONE(RESERVED90),
+	PERIPHC_MSENC,
+	NONE(RESERVED92),
+	NONE(RESERVED93),
+	NONE(RESERVED94),
+	NONE(XUSB_DEV),
+
+	/* V word: 31:0 */
+	NONE(CPUG),
+	NONE(CPULP),
+	NONE(V_RESERVED2),
+	PERIPHC_MSELECT,
+	NONE(V_RESERVED4),
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+
+	/* 104 */
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+	PERIPHC_AUDIO,
+	NONE(APBIF),
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+
+	/* 112 */
+	NONE(ATOMICS),
+	NONE(V_RESERVED17),
+	NONE(V_RESERVED18),
+	NONE(V_RESERVED19),
+	NONE(V_RESERVED20),
+	NONE(V_RESERVED21),
+	NONE(V_RESERVED22),
+	PERIPHC_ACTMON,
+
+	/* 120 */
+	NONE(EXTPERIPH1),
+	NONE(EXTPERIPH2),
+	NONE(EXTPERIPH3),
+	NONE(OOB),
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+	NONE(TZRAM),
+	NONE(SE),
+
+	/* W word: 31:0 */
+	NONE(HDA2HDMICODEC),
+	NONE(SATACOLD),
+	NONE(W_RESERVED2),
+	NONE(W_RESERVED3),
+	NONE(W_RESERVED4),
+	NONE(W_RESERVED5),
+	NONE(W_RESERVED6),
+	NONE(W_RESERVED7),
+
+	/* 136 */
+	NONE(CEC),
+	NONE(W_RESERVED9),
+	NONE(W_RESERVED10),
+	NONE(W_RESERVED11),
+	NONE(W_RESERVED12),
+	NONE(W_RESERVED13),
+	NONE(XUSB_PADCTL),
+	NONE(W_RESERVED15),
+
+	/* 144 */
+	NONE(W_RESERVED16),
+	NONE(W_RESERVED17),
+	NONE(W_RESERVED18),
+	NONE(W_RESERVED19),
+	NONE(W_RESERVED20),
+	NONE(ENTROPY),
+	NONE(DDS),
+	NONE(W_RESERVED23),
+
+	/* 152 */
+	NONE(DP2),
+	NONE(AMX0),
+	NONE(ADX0),
+	NONE(DVFS),
+	NONE(XUSB_SS),
+	NONE(W_RESERVED29),
+	NONE(W_RESERVED30),
+	NONE(W_RESERVED31),
+
+	/* X word: 31:0 */
+	NONE(SPARE),
+	NONE(X_RESERVED1),
+	NONE(X_RESERVED2),
+	NONE(X_RESERVED3),
+	NONE(CAM_MCLK),
+	NONE(CAM_MCLK2),
+	PERIPHC_I2C6,
+	NONE(X_RESERVED7),
+
+	/* 168 */
+	NONE(X_RESERVED8),
+	NONE(X_RESERVED9),
+	NONE(X_RESERVED10),
+	NONE(VIM2_CLK),
+	NONE(X_RESERVED12),
+	NONE(X_RESERVED13),
+	NONE(EMC_DLL),
+	NONE(X_RESERVED15),
+
+	/* 176 */
+	NONE(HDMI_AUDIO),
+	NONE(CLK72MHZ),
+	NONE(VIC),
+	NONE(X_RESERVED19),
+	NONE(ADX1),
+	NONE(DPAUX),
+	NONE(SOR0),
+	NONE(X_RESERVED23),
+
+	/* 184 */
+	NONE(GPU),
+	NONE(AMX1),
+	NONE(X_RESERVED26),
+	NONE(X_RESERVED27),
+	NONE(X_RESERVED28),
+	NONE(X_RESERVED29),
+	NONE(X_RESERVED30),
+	NONE(X_RESERVED31),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that Tegra30+ support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+	if (reg & 1)				/* one of the newer freqs */
+		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+	return reg >> 2;	/* Map to most common (T20) freqs */
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	/* Coresight is a special case */
+	if (periph_id == PERIPH_ID_CSI)
+		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(internal_id != -1);
+	if (internal_id >= PERIPHC_VW_FIRST) {
+		internal_id -= PERIPHC_VW_FIRST;
+		return &clkrst->crc_clk_src_vw[internal_id];
+	} else {
+		return &clkrst->crc_clk_src[internal_id];
+	}
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+	enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	enum periphc_internal_id internal_id;
+	int mux;
+
+	assert(clock_periph_id_isvalid(periph_id));
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(periphc_internal_id_isvalid(internal_id));
+
+	type = clock_periph_type[internal_id];
+	assert(clock_type_id_isvalid(type));
+
+	*mux_bits = clock_source[type][CLOCK_MAX_MUX];
+
+	if (type == CLOCK_TYPE_PC2CC3M_T16)
+		*divider_bits = 16;
+	else
+		*divider_bits = 8;
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+	       parent);
+	return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk;
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	else
+		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset;
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if (periph_id < PERIPH_ID_VW_FIRST)
+		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	else
+		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id    Clock ID according to tegra124 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > PERIPH_ID_COUNT)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case PERIPH_ID_RESERVED4:
+	case PERIPH_ID_RESERVED25:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED36:
+	case PERIPH_ID_RESERVED38:
+	case PERIPH_ID_RESERVED43:
+	case PERIPH_ID_RESERVED49:
+	case PERIPH_ID_RESERVED53:
+	case PERIPH_ID_RESERVED64:
+	case PERIPH_ID_RESERVED84:
+	case PERIPH_ID_RESERVED85:
+	case PERIPH_ID_RESERVED86:
+	case PERIPH_ID_RESERVED88:
+	case PERIPH_ID_RESERVED90:
+	case PERIPH_ID_RESERVED92:
+	case PERIPH_ID_RESERVED93:
+	case PERIPH_ID_RESERVED94:
+	case PERIPH_ID_V_RESERVED2:
+	case PERIPH_ID_V_RESERVED4:
+	case PERIPH_ID_V_RESERVED17:
+	case PERIPH_ID_V_RESERVED18:
+	case PERIPH_ID_V_RESERVED19:
+	case PERIPH_ID_V_RESERVED20:
+	case PERIPH_ID_V_RESERVED21:
+	case PERIPH_ID_V_RESERVED22:
+	case PERIPH_ID_W_RESERVED2:
+	case PERIPH_ID_W_RESERVED3:
+	case PERIPH_ID_W_RESERVED4:
+	case PERIPH_ID_W_RESERVED5:
+	case PERIPH_ID_W_RESERVED6:
+	case PERIPH_ID_W_RESERVED7:
+	case PERIPH_ID_W_RESERVED9:
+	case PERIPH_ID_W_RESERVED10:
+	case PERIPH_ID_W_RESERVED11:
+	case PERIPH_ID_W_RESERVED12:
+	case PERIPH_ID_W_RESERVED13:
+	case PERIPH_ID_W_RESERVED15:
+	case PERIPH_ID_W_RESERVED16:
+	case PERIPH_ID_W_RESERVED17:
+	case PERIPH_ID_W_RESERVED18:
+	case PERIPH_ID_W_RESERVED19:
+	case PERIPH_ID_W_RESERVED20:
+	case PERIPH_ID_W_RESERVED23:
+	case PERIPH_ID_W_RESERVED29:
+	case PERIPH_ID_W_RESERVED30:
+	case PERIPH_ID_W_RESERVED31:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+#endif /* CONFIG_OF_CONTROL */
+
+void clock_early_init(void)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+	tegra30_set_up_pllp();
+
+	/*
+	 * PLLC output frequency set to 600Mhz
+	 * PLLD output frequency set to 925Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+
+	/* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */
+	writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]);
+
+	/* PLLC_MISC: Set LOCK_ENABLE */
+	writel(0x01000000, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc);
+	udelay(2);
+
+	/* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1 */
+	writel(0x40000C10, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
+	udelay(2);
+}
+
+void arch_timer_init(void)
+{
+	struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
+	u32 freq, val;
+
+	freq = clock_get_rate(CLOCK_ID_OSC);
+	debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq);
+
+	/* ARM CNTFRQ */
+	asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
+
+	/* Only Tegra114+ has the System Counter regs */
+	debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq);
+	writel(freq, &sysctr->cntfid0);
+
+	val = readl(&sysctr->cntcr);
+	val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG;
+	writel(val, &sysctr->cntcr);
+	debug("%s: TSC CNTCR = 0x%08X\n", __func__, val);
+}
diff --git a/arch/arm/cpu/tegra124-common/funcmux.c b/arch/arm/cpu/tegra124-common/funcmux.c
new file mode 100644
index 0000000..d19fda0
--- /dev/null
+++ b/arch/arm/cpu/tegra124-common/funcmux.c
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/* Tegra124 high-level function multiplexing */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	case PERIPH_ID_UART4:
+		switch (config) {
+		case FUNCMUX_UART4_GPIO: /* TXD,RXD,CTS,RTS */
+			pinmux_set_func(PINGRP_GPIO_PJ7, PMUX_FUNC_UARTD);
+			pinmux_set_func(PINGRP_GPIO_PB0, PMUX_FUNC_UARTD);
+			pinmux_set_func(PINGRP_GPIO_PB1, PMUX_FUNC_UARTD);
+			pinmux_set_func(PINGRP_GPIO_PK7, PMUX_FUNC_UARTD);
+
+			pinmux_set_io(PINGRP_GPIO_PJ7, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PINGRP_GPIO_PB0, PMUX_PIN_INPUT);
+			pinmux_set_io(PINGRP_GPIO_PB1, PMUX_PIN_INPUT);
+			pinmux_set_io(PINGRP_GPIO_PK7, PMUX_PIN_OUTPUT);
+
+			pinmux_tristate_disable(PINGRP_GPIO_PJ7);
+			pinmux_tristate_disable(PINGRP_GPIO_PB0);
+			pinmux_tristate_disable(PINGRP_GPIO_PB1);
+			pinmux_tristate_disable(PINGRP_GPIO_PK7);
+			break;
+		}
+		break;
+
+	case PERIPH_ID_UART1:
+		switch (config) {
+		case FUNCMUX_UART1_KBC:
+			pinmux_set_func(PINGRP_KB_ROW9, PMUX_FUNC_UARTA);
+			pinmux_set_func(PINGRP_KB_ROW10, PMUX_FUNC_UARTA);
+
+			pinmux_set_io(PINGRP_KB_ROW9, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PINGRP_KB_ROW10, PMUX_PIN_INPUT);
+
+			pinmux_tristate_disable(PINGRP_KB_ROW9);
+			pinmux_tristate_disable(PINGRP_KB_ROW10);
+			break;
+		}
+		break;
+
+	/* Add other periph IDs here as needed */
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	return 0;
+}
diff --git a/arch/arm/cpu/tegra124-common/pinmux.c b/arch/arm/cpu/tegra124-common/pinmux.c
new file mode 100644
index 0000000..a4ab4ea
--- /dev/null
+++ b/arch/arm/cpu/tegra124-common/pinmux.c
@@ -0,0 +1,730 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/* Tegra124 pin multiplexing functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/pinmux.h>
+
+struct tegra_pingroup_desc {
+	const char *name;
+	enum pmux_func funcs[4];
+	enum pmux_func func_safe;
+	enum pmux_vddio vddio;
+	enum pmux_pin_io io;
+};
+
+#define PMUX_MUXCTL_SHIFT	0
+#define PMUX_PULL_SHIFT		2
+#define PMUX_TRISTATE_SHIFT	4
+#define PMUX_TRISTATE_MASK	(1 << PMUX_TRISTATE_SHIFT)
+#define PMUX_IO_SHIFT		5
+#define PMUX_OD_SHIFT		6
+#define PMUX_LOCK_SHIFT		7
+#define PMUX_IO_RESET_SHIFT	8
+#define PMUX_RCV_SEL_SHIFT	9
+
+#define PGRP_HSM_SHIFT		2
+#define PGRP_SCHMT_SHIFT	3
+#define PGRP_LPMD_SHIFT		4
+#define PGRP_LPMD_MASK		(3 << PGRP_LPMD_SHIFT)
+#define PGRP_DRVDN_SHIFT	12
+#define PGRP_DRVDN_MASK		(0x7F << PGRP_DRVDN_SHIFT)
+#define PGRP_DRVUP_SHIFT	20
+#define PGRP_DRVUP_MASK		(0x7F << PGRP_DRVUP_SHIFT)
+#define PGRP_SLWR_SHIFT		28
+#define PGRP_SLWR_MASK		(3 << PGRP_SLWR_SHIFT)
+#define PGRP_SLWF_SHIFT		30
+#define PGRP_SLWF_MASK		(3 << PGRP_SLWF_SHIFT)
+
+/* Convenient macro for defining pin group properties */
+#define PIN(pg_name, vdd, f0, f1, f2, f3, iod)	\
+	{						\
+		.vddio = PMUX_VDDIO_ ## vdd,		\
+		.funcs = {				\
+			PMUX_FUNC_ ## f0,		\
+			PMUX_FUNC_ ## f1,		\
+			PMUX_FUNC_ ## f2,		\
+			PMUX_FUNC_ ## f3,		\
+		},					\
+		.func_safe = PMUX_FUNC_RSVD1,		\
+		.io = PMUX_PIN_ ## iod,			\
+	}
+
+/* Input and output pins */
+#define PINI(pg_name, vdd, f0, f1, f2, f3) \
+	PIN(pg_name, vdd, f0, f1, f2, f3, INPUT)
+#define PINO(pg_name, vdd, f0, f1, f2, f3) \
+	PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
+
+/* A pin group number which is not used */
+#define PIN_RESERVED \
+	PIN(NONE, NONE, INVALID, INVALID, INVALID, INVALID, NONE)
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
+	/*	NAME	  VDD	   f0		f1	   f2	    f3  */
+	PINI(ULPI_DATA0,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA1,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA2,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA3,  BB,	   SPI3,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA4,  BB,	   SPI2,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA5,  BB,      SPI2,        HSI,       UARTA,   ULPI),
+	PINI(ULPI_DATA6,  BB,      SPI2,        HSI,       UARTA,   ULPI),
+	PINI(ULPI_DATA7,  BB,      SPI2,        HSI,       UARTA,   ULPI),
+	PINI(ULPI_CLK,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(ULPI_DIR,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(ULPI_NXT,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(ULPI_STP,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(DAP3_FS,     BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(DAP3_DIN,    BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(DAP3_DOUT,   BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(DAP3_SCLK,   BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(GPIO_PV0,    BB,      USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_PV1,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC1_CLK,  SDMMC1,  SDMMC1,     CLK12,      RSVD3,   RSVD4),
+	PINI(SDMMC1_CMD,  SDMMC1,  SDMMC1,     SPDIF,      SPI4,    UARTA),
+	PINI(SDMMC1_DAT3, SDMMC1,  SDMMC1,     SPDIF,      SPI4,    UARTA),
+	PINI(SDMMC1_DAT2, SDMMC1,  SDMMC1,     PWM0,       SPI4,    UARTA),
+	PINI(SDMMC1_DAT1, SDMMC1,  SDMMC1,     PWM1,       SPI4,    UARTA),
+	PINI(SDMMC1_DAT0, SDMMC1,  SDMMC1,     RSVD2,      SPI4,    UARTA),
+	PIN_RESERVED,	/* Reserved: 0x3060 - 0x3064 */
+	PIN_RESERVED,
+	PINI(CLK2_OUT,    SDMMC1,  EXTPERIPH2, RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK2_REQ,    SDMMC1,  DAP,        RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved: 0x3070 - 0x310c */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PINI(HDMI_INT,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(DDC_SCL,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(DDC_SDA,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved: 0x311c - 0x3160 */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PINI(UART2_RXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
+	PINI(UART2_TXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
+	PINI(UART2_RTS_N, UART,    UARTA,      UARTB,      RSVD3,   SPI4),
+	PINI(UART2_CTS_N, UART,    UARTA,      UARTB,      RSVD3,   SPI4),
+	PINI(UART3_TXD,   UART,    UARTC,      RSVD2,      RSVD3,   SPI4),
+	PINI(UART3_RXD,   UART,    UARTC,      RSVD2,      RSVD3,   SPI4),
+	PINI(UART3_CTS_N, UART,    UARTC,      SDMMC1,     DTV,     SPI4),
+	PINI(UART3_RTS_N, UART,    UARTC,      PWM0,       DTV,     DISPA),
+	PINI(GPIO_PU0,    UART,    OWR,        UARTA,      RSVD3,   RSVD4),
+	PINI(GPIO_PU1,    UART,    RSVD1,      UARTA,      RSVD3,   RSVD4),
+	PINI(GPIO_PU2,    UART,    RSVD1,      UARTA,      RSVD3,   RSVD4),
+	PINI(GPIO_PU3,    UART,    PWM0,       UARTA,      DISPA,   DISPB),
+	PINI(GPIO_PU4,    UART,    PWM1,       UARTA,      DISPA,   DISPB),
+	PINI(GPIO_PU5,    UART,    PWM2,       UARTA,      DISPA,   DISPB),
+	PINI(GPIO_PU6,    UART,    PWM3,       UARTA,      USB,     DISPB),
+	PINI(GEN1_I2C_SDA, UART,   I2C1,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GEN1_I2C_SCL, UART,   I2C1,       RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP4_FS,     UART,    I2S3,       RSVD2,      DTV,     RSVD4),
+	PINI(DAP4_DIN,    UART,    I2S3,       RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP4_DOUT,   UART,    I2S3,       RSVD2,      DTV,     RSVD4),
+	PINI(DAP4_SCLK,   UART,    I2S3,       RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK3_OUT,    UART,    EXTPERIPH3, RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK3_REQ,    UART,    DEV3,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GMI_WP_N,    GMI,     RSVD1,      NAND,       GMI,     GMI_ALT),
+	PINI(GMI_IORDY,   GMI,     SDMMC2,     RSVD2,      GMI,     TRACE),
+	PINI(GMI_WAIT,    GMI,     SPI4,       NAND,       GMI,     DTV),
+	PINI(GMI_ADV_N,   GMI,     RSVD1,      NAND,       GMI,     TRACE),
+	PINI(GMI_CLK,     GMI,     SDMMC2,     NAND,       GMI,     TRACE),
+	PINI(GMI_CS0_N,   GMI,     RSVD1,      NAND,       GMI,     USB),
+	PINI(GMI_CS1_N,   GMI,     RSVD1,      NAND,       GMI,     SOC),
+	PINI(GMI_CS2_N,   GMI,     SDMMC2,     NAND,       GMI,     TRACE),
+	PINI(GMI_CS3_N,   GMI,     SDMMC2,     NAND,       GMI,     GMI_ALT),
+	PINI(GMI_CS4_N,   GMI,     USB,        NAND,       GMI,     TRACE),
+	PINI(GMI_CS6_N,   GMI,     NAND,       NAND_ALT,   GMI,     SPI4),
+	PINI(GMI_CS7_N,   GMI,     NAND,       NAND_ALT,   GMI,     SDMMC2),
+	PINI(GMI_AD0,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD1,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD2,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD3,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD4,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD5,     GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_AD6,     GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_AD7,     GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_AD8,     GMI,     PWM0,       NAND,       GMI,     DTV),
+	PINI(GMI_AD9,     GMI,     PWM1,       NAND,       GMI,     CLDVFS),
+	PINI(GMI_AD10,    GMI,     PWM2,       NAND,       GMI,     CLDVFS),
+	PINI(GMI_AD11,    GMI,     PWM3,       NAND,       GMI,     USB),
+	PINI(GMI_AD12,    GMI,     SDMMC2,     NAND,       GMI,     RSVD4),
+	PINI(GMI_AD13,    GMI,     SDMMC2,     NAND,       GMI,     RSVD4),
+	PINI(GMI_AD14,    GMI,     SDMMC2,     NAND,       GMI,     DTV),
+	PINI(GMI_AD15,    GMI,     SDMMC2,     NAND,       GMI,     DTV),
+	PINI(GMI_A16,     GMI,     UARTD,      TRACE,      GMI,     GMI_ALT),
+	PINI(GMI_A17,     GMI,     UARTD,      RSVD2,      GMI,     TRACE),
+	PINI(GMI_A18,     GMI,     UARTD,      RSVD2,      GMI,     TRACE),
+	PINI(GMI_A19,     GMI,     UARTD,      SPI4,       GMI,     TRACE),
+	PINI(GMI_WR_N,    GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_OE_N,    GMI,     RSVD1,      NAND,       GMI,     SOC),
+	PINI(GMI_DQS,     GMI,     SDMMC2,     NAND,       GMI,     TRACE),
+	PINI(GMI_RST_N,   GMI,     NAND,       NAND_ALT,   GMI,     RSVD4),
+	PINI(GEN2_I2C_SCL, GMI,    I2C2,       RSVD2,      GMI,     RSVD4),
+	PINI(GEN2_I2C_SDA, GMI,    I2C2,       RSVD2,      GMI,     RSVD4),
+	PINI(SDMMC4_CLK,  SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
+	PINI(SDMMC4_CMD,  SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
+	PINI(SDMMC4_DAT0, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT1, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT2, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT3, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT4, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT5, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT6, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT7, SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
+	PIN_RESERVED,	/* Reserved: 0x3280 */
+	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT3, RSVD4),
+	PINI(GPIO_PCC1,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_PBB0,   CAM,     I2S4,       VI,         VI_ALT1, VI_ALT3),
+	PINI(CAM_I2C_SCL, CAM,     VGP1,       I2C3,       RSVD3,   RSVD4),
+	PINI(CAM_I2C_SDA, CAM,     VGP2,       I2C3,       RSVD3,   RSVD4),
+	PINI(GPIO_PBB3,   CAM,     VGP3,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB4,   CAM,     VGP4,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB5,   CAM,     VGP5,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB6,   CAM,     VGP6,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB7,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_PCC2,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(JTAG_RTCK,   SYS,     RTCK,       RSVD2,      RSVD3,   RSVD4),
+	PINI(PWR_I2C_SCL, SYS,     I2CPWR,     RSVD2,      RSVD3,   RSVD4),
+	PINI(PWR_I2C_SDA, SYS,     I2CPWR,     RSVD2,      RSVD3,   RSVD4),
+	PINI(KB_ROW0,     SYS,     KBC,        RSVD2,      DTV,     RSVD4),
+	PINI(KB_ROW1,     SYS,     KBC,        RSVD2,      DTV,     RSVD4),
+	PINI(KB_ROW2,     SYS,     KBC,        RSVD2,      DTV,     SOC),
+	PINI(KB_ROW3,     SYS,     KBC,        DISPA,      RSVD3,   DISPB),
+	PINI(KB_ROW4,     SYS,     KBC,        DISPA,      SPI2,    DISPB),
+	PINI(KB_ROW5,     SYS,     KBC,        DISPA,      SPI2,    DISPB),
+	PINI(KB_ROW6,     SYS,     KBC,        DISPA,      RSVD3,   DISPB),
+	PINI(KB_ROW7,     SYS,     KBC,        RSVD2,      CLDVFS,  UARTA),
+	PINI(KB_ROW8,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
+	PINI(KB_ROW9,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
+	PINI(KB_ROW10,    SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
+	PIN_RESERVED,	/* Reserved: 0x32e8 - 0x32f8 */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PINI(KB_COL0,     SYS,     KBC,        USB,        SPI2,    EMC_DLL),
+	PINI(KB_COL1,     SYS,     KBC,        RSVD2,      SPI2,    EMC_DLL),
+	PINI(KB_COL2,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
+	PINI(KB_COL3,     SYS,     KBC,        DISPA,      PWM2,    UARTA),
+	PINI(KB_COL4,     SYS,     KBC,        OWR,        SDMMC3,  UARTA),
+	PINI(KB_COL5,     SYS,     KBC,        RSVD2,      SDMMC1,  RSVD4),
+	PINI(KB_COL6,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
+	PINI(KB_COL7,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
+	PINI(CLK_32K_OUT, SYS,     BLINK,      SOC,        RSVD3,   RSVD4),
+	PINI(SYS_CLK_REQ, SYS,     SYSCLK,     RSVD2,      RSVD3,   RSVD4),
+	PINI(CORE_PWR_REQ, SYS,    PWRON,      RSVD2,      RSVD3,   RSVD4),
+	PINI(CPU_PWR_REQ, SYS,     CPU,        RSVD2,      RSVD3,   RSVD4),
+	PINI(PWR_INT_N,   SYS,     PMI,        RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK_32K_IN,  SYS,     CLK,        RSVD2,      RSVD3,   RSVD4),
+	PINI(OWR,         SYS,     OWR,        RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP1_FS,     AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(DAP1_DIN,    AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(DAP1_DOUT,   AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(DAP1_SCLK,   AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(CLK1_REQ,    AUDIO,   DAP,        DAP1,       RSVD3,   RSVD4),
+	PINI(CLK1_OUT,    AUDIO,   EXTPERIPH1, DAP2,       RSVD3,   RSVD4),
+	PINI(SPDIF_IN,    AUDIO,   SPDIF,      USB,        RSVD3,   RSVD4),
+	PINI(SPDIF_OUT,   AUDIO,   SPDIF,      RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP2_FS,     AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(DAP2_DIN,    AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(DAP2_DOUT,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(DAP2_SCLK,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(DVFS_PWM,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(GPIO_X1_AUD, AUDIO,   SPI6,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_X3_AUD, AUDIO,   SPI6,       SPI1,       RSVD3,   RSVD4),
+	PINI(DVFS_CLK,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(GPIO_X4_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    DAP2),
+	PINI(GPIO_X5_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PINI(GPIO_X6_AUD, AUDIO,   SPI6,       SPI1,       SPI2,    RSVD4),
+	PINI(GPIO_X7_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PIN_RESERVED,   /* Reserved: 0x3388 - 0x338c */
+	PIN_RESERVED,
+	PINI(SDMMC3_CLK,  SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
+	PINI(SDMMC3_CMD,  SDMMC3,  SDMMC3,     PWM3,       UARTA,   SPI3),
+	PINI(SDMMC3_DAT0, SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
+	PINI(SDMMC3_DAT1, SDMMC3,  SDMMC3,     PWM2,       UARTA,   SPI3),
+	PINI(SDMMC3_DAT2, SDMMC3,  SDMMC3,     PWM1,       DISPA,   SPI3),
+	PINI(SDMMC3_DAT3, SDMMC3,  SDMMC3,     PWM0,       DISPB,   SPI3),
+	PIN_RESERVED,   /* Reserved: 0x33a8 - 0x33dc */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PINI(HDMI_CEC,    SYS,     CEC,        SDMMC3,     RSVD3,   SOC),
+	PINI(SDMMC1_WP_N, SDMMC1,  SDMMC1,     CLK12,      SPI4,    UARTA),
+	PINI(SDMMC3_CD_N, SYS,  SDMMC3,     OWR,        RSVD3,   RSVD4),
+	PINI(GPIO_W2_AUD, AUDIO,   SPI6,       RSVD2,      SPI2,    I2C1),
+	PINI(GPIO_W3_AUD, AUDIO,   SPI6,       SPI1,       SPI2,    I2C1),
+	PINI(USB_VBUS_EN0, LCD,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(USB_VBUS_EN1, LCD,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_CLK_LB_IN,  SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
+	PINI(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved: 0x3404 */
+	PINO(RESET_OUT_N, SYS,     RSVD1,      RSVD2,      RSVD3, RESET_OUT_N),
+};
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *tri = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin */
+	assert(pmux_pingrp_isvalid(pin));
+
+	reg = readl(tri);
+	if (enable)
+		reg |= PMUX_TRISTATE_MASK;
+	else
+		reg &= ~PMUX_TRISTATE_MASK;
+	writel(reg, tri);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, 1);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, 0);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pull = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and pupd */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_pupd_isvalid(pupd));
+
+	reg = readl(pull);
+	reg &= ~(0x3 << PMUX_PULL_SHIFT);
+	reg |= (pupd << PMUX_PULL_SHIFT);
+	writel(reg, pull);
+}
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *muxctl = &pmt->pmt_ctl[pin];
+	int i, mux = -1;
+	u32 reg;
+
+	/* Error check on pin and func */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_func_isvalid(func));
+
+	/* Handle special values */
+	if (func == PMUX_FUNC_SAFE)
+		func = tegra_soc_pingroups[pin].func_safe;
+
+	if (func & PMUX_FUNC_RSVD1) {
+		mux = func & 0x3;
+	} else {
+		/* Search for the appropriate function */
+		for (i = 0; i < 4; i++) {
+			if (tegra_soc_pingroups[pin].funcs[i] == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+	assert(mux != -1);
+
+	reg = readl(muxctl);
+	reg &= ~(0x3 << PMUX_MUXCTL_SHIFT);
+	reg |= (mux << PMUX_MUXCTL_SHIFT);
+	writel(reg, muxctl);
+}
+
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_io = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and io */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_io_isvalid(io));
+
+	reg = readl(pin_io);
+	reg &= ~(0x1 << PMUX_IO_SHIFT);
+	reg |= (io & 0x1) << PMUX_IO_SHIFT;
+	writel(reg, pin_io);
+}
+
+static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_lock = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and lock */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_lock_isvalid(lock));
+
+	if (lock == PMUX_PIN_LOCK_DEFAULT)
+		return 0;
+
+	reg = readl(pin_lock);
+	reg &= ~(0x1 << PMUX_LOCK_SHIFT);
+	if (lock == PMUX_PIN_LOCK_ENABLE) {
+		reg |= (0x1 << PMUX_LOCK_SHIFT);
+	} else {
+		/* lock == DISABLE, which isn't possible */
+		printf("%s: Warning: lock == %d, DISABLE is not allowed!\n",
+		       __func__, lock);
+	}
+	writel(reg, pin_lock);
+
+	return 0;
+}
+
+static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_od = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and od */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_od_isvalid(od));
+
+	if (od == PMUX_PIN_OD_DEFAULT)
+		return 0;
+
+	reg = readl(pin_od);
+	reg &= ~(0x1 << PMUX_OD_SHIFT);
+	if (od == PMUX_PIN_OD_ENABLE)
+		reg |= (0x1 << PMUX_OD_SHIFT);
+	writel(reg, pin_od);
+
+	return 0;
+}
+
+static int pinmux_set_ioreset(enum pmux_pingrp pin,
+				enum pmux_pin_ioreset ioreset)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_ioreset = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and ioreset */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_ioreset_isvalid(ioreset));
+
+	if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+		return 0;
+
+	reg = readl(pin_ioreset);
+	reg &= ~(0x1 << PMUX_IO_RESET_SHIFT);
+	if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+		reg |= (0x1 << PMUX_IO_RESET_SHIFT);
+	writel(reg, pin_ioreset);
+
+	return 0;
+}
+
+static int pinmux_set_rcv_sel(enum pmux_pingrp pin,
+				enum pmux_pin_rcv_sel rcv_sel)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_rcv_sel = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and rcv_sel */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_rcv_sel_isvalid(rcv_sel));
+
+	if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT)
+		return 0;
+
+	reg = readl(pin_rcv_sel);
+	reg &= ~(0x1 << PMUX_RCV_SEL_SHIFT);
+	if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH)
+		reg |= (0x1 << PMUX_RCV_SEL_SHIFT);
+	writel(reg, pin_rcv_sel);
+
+	return 0;
+}
+
+void pinmux_config_pingroup(struct pingroup_config *config)
+{
+	enum pmux_pingrp pin = config->pingroup;
+
+	pinmux_set_func(pin, config->func);
+	pinmux_set_pullupdown(pin, config->pull);
+	pinmux_set_tristate(pin, config->tristate);
+	pinmux_set_io(pin, config->io);
+	pinmux_set_lock(pin, config->lock);
+	pinmux_set_od(pin, config->od);
+	pinmux_set_ioreset(pin, config->ioreset);
+	pinmux_set_rcv_sel(pin, config->rcv_sel);
+}
+
+void pinmux_config_table(struct pingroup_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_pingroup(&config[i]);
+}
+
+static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, int slwf)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwf = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwf */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwf));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwf == PGRP_SLWF_NONE)
+		return 0;
+
+	reg = readl(pad_slwf);
+	reg &= ~PGRP_SLWF_MASK;
+	reg |= (slwf << PGRP_SLWF_SHIFT);
+	writel(reg, pad_slwf);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwr = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwr */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwr));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwr == PGRP_SLWR_NONE)
+		return 0;
+
+	reg = readl(pad_slwr);
+	reg &= ~PGRP_SLWR_MASK;
+	reg |= (slwr << PGRP_SLWR_SHIFT);
+	writel(reg, pad_slwr);
+
+	return 0;
+}
+
+static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvup = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvup */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvup));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvup == PGRP_DRVUP_NONE)
+		return 0;
+
+	reg = readl(pad_drvup);
+	reg &= ~PGRP_DRVUP_MASK;
+	reg |= (drvup << PGRP_DRVUP_SHIFT);
+	writel(reg, pad_drvup);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvdn = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvdn */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvdn));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvdn == PGRP_DRVDN_NONE)
+		return 0;
+
+	reg = readl(pad_drvdn);
+	reg &= ~PGRP_DRVDN_MASK;
+	reg |= (drvdn << PGRP_DRVDN_SHIFT);
+	writel(reg, pad_drvdn);
+
+	return 0;
+}
+
+static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_lpmd = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad and lpmd value */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_lpmd_isvalid(lpmd));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (lpmd == PGRP_LPMD_NONE)
+		return 0;
+
+	reg = readl(pad_lpmd);
+	reg &= ~PGRP_LPMD_MASK;
+	reg |= (lpmd << PGRP_LPMD_SHIFT);
+	writel(reg, pad_lpmd);
+
+	return 0;
+}
+
+static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_schmt = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (schmt == PGRP_SCHMT_NONE)
+		return 0;
+
+	reg = readl(pad_schmt);
+	reg &= ~(1 << PGRP_SCHMT_SHIFT);
+	if (schmt == PGRP_SCHMT_ENABLE)
+		reg |= (0x1 << PGRP_SCHMT_SHIFT);
+	writel(reg, pad_schmt);
+
+	return 0;
+}
+static int padgrp_set_hsm(enum pdrive_pingrp pad, enum pgrp_hsm hsm)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_hsm = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (hsm == PGRP_HSM_NONE)
+		return 0;
+
+	reg = readl(pad_hsm);
+	reg &= ~(1 << PGRP_HSM_SHIFT);
+	if (hsm == PGRP_HSM_ENABLE)
+		reg |= (0x1 << PGRP_HSM_SHIFT);
+	writel(reg, pad_hsm);
+
+	return 0;
+}
+
+void padctrl_config_pingroup(struct padctrl_config *config)
+{
+	enum pdrive_pingrp pad = config->padgrp;
+
+	padgrp_set_drvup_slwf(pad, config->slwf);
+	padgrp_set_drvdn_slwr(pad, config->slwr);
+	padgrp_set_drvup(pad, config->drvup);
+	padgrp_set_drvdn(pad, config->drvdn);
+	padgrp_set_lpmd(pad, config->lpmd);
+	padgrp_set_schmt(pad, config->schmt);
+	padgrp_set_hsm(pad, config->hsm);
+}
+
+void padgrp_config_table(struct padctrl_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		padctrl_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/cpu/tegra20-common/clock.c
index 34124f9..0c4f5fb 100644
--- a/arch/arm/cpu/tegra20-common/clock.c
+++ b/arch/arm/cpu/tegra20-common/clock.c
@@ -412,9 +412,9 @@ int get_periph_clock_source(enum periph_id periph_id,
 	 * with its 16-bit divisor
 	 */
 	if (type == CLOCK_TYPE_PCXTS)
-		*mux_bits = 4;
+		*mux_bits = MASK_BITS_31_28;
 	else
-		*mux_bits = 2;
+		*mux_bits = MASK_BITS_31_30;
 	if (type == CLOCK_TYPE_PCMT16)
 		*divider_bits = 16;
 	else
diff --git a/arch/arm/cpu/tegra30-common/clock.c b/arch/arm/cpu/tegra30-common/clock.c
index 74bd22b..80ba2d8 100644
--- a/arch/arm/cpu/tegra30-common/clock.c
+++ b/arch/arm/cpu/tegra30-common/clock.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -60,12 +60,6 @@ enum {
 	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
 };
 
-enum {
-	MASK_BITS_31_30 = 2,    /* num of bits used to specify clock source */
-	MASK_BITS_31_29,
-	MASK_BITS_29_28,
-};
-
 /*
  * Clock source mux for each clock type. This just converts our enum into
  * a list of mux sources for use by the code.
@@ -108,7 +102,7 @@ static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
 		MASK_BITS_31_29},
 	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(SFROM32KHZ), CLK(OSC),
 		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
-		MASK_BITS_29_28}
+		MASK_BITS_31_28}
 };
 
 /*
@@ -587,34 +581,7 @@ enum periph_id clk_id_to_periph_id(int clk_id)
 
 void clock_early_init(void)
 {
-	/*
-	 * PLLP output frequency set to 408Mhz
-	 * PLLC output frequency set to 228Mhz
-	 */
-	switch (clock_get_osc_freq()) {
-	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
-		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
-		clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
-		break;
-
-	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
-		clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
-		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
-		break;
-
-	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
-		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
-		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
-		break;
-	case CLOCK_OSC_FREQ_19_2:
-	default:
-		/*
-		 * These are not supported. It is too early to print a
-		 * message and the UART likely won't work anyway due to the
-		 * oscillator being wrong.
-		 */
-		break;
-	}
+	tegra30_set_up_pllp();
 }
 
 void arch_timer_init(void)
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index 4880d0f..3e88668 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -42,7 +42,12 @@ SECTIONS
 		__rel_dyn_end = .;
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 	.bss __rel_dyn_start (OVERLAY) : {
 		__bss_start = .;
@@ -51,7 +56,7 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 4da5d24..87c2de2 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -60,7 +60,12 @@ SECTIONS
 		*(.__rel_dyn_end)
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 	/*
 	 * Deprecated: this MMU section is used by pxa at present but
@@ -91,7 +96,7 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/dts/.gitignore b/arch/arm/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/arm/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
new file mode 100644
index 0000000..e2fcca5
--- /dev/null
+++ b/arch/arm/dts/Makefile
@@ -0,0 +1,36 @@
+dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
+	exynos5250-snow.dtb \
+	exynos5250-smdk5250.dtb \
+	exynos5420-smdk5420.dtb
+dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb \
+	tegra20-whistler.dtb \
+	tegra20-colibri_t20_iris.dtb \
+	tegra30-beaver.dtb \
+	tegra30-cardhu.dtb \
+	tegra30-tec-ng.dtb \
+	tegra114-dalmore.dtb \
+	tegra124-venice2.dtb
+dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \
+	zynq-zc706.dtb \
+	zynq-zed.dtb \
+	zynq-microzed.dtb \
+	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+	@:
+
+clean-files := *.dtb
diff --git a/arch/arm/dts/exynos5250-arndale.dts b/arch/arm/dts/exynos5250-arndale.dts
new file mode 100644
index 0000000..202f2ea
--- /dev/null
+++ b/arch/arm/dts/exynos5250-arndale.dts
@@ -0,0 +1,39 @@
+/*
+ * SAMSUNG Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+*/
+
+/dts-v1/;
+#include "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG Arndale board based on EXYNOS5250";
+	compatible = "samsung,arndale", "samsung,exynos5250";
+
+	aliases {
+		serial0 = "/serial@12C20000";
+		console = "/serial@12C20000";
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts
new file mode 100644
index 0000000..9020382
--- /dev/null
+++ b/arch/arm/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,151 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		i2s = "/sound@3830000";
+	};
+
+	sromc@12250000 {
+		bank = <1>;
+		srom-timing = <1 9 12 1 6 1 1>;
+		width = <2>;
+		lan@5000000 {
+			compatible = "smsc,lan9215", "smsc,lan";
+			reg = <0x5000000 0x100>;
+			phy-mode = "mii";
+		};
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "wm8994";
+	};
+
+	sound@12d60000 {
+		status = "disabled";
+	};
+
+	i2c@12c70000 {
+		soundcodec@1a {
+			reg = <0x1a>;
+			compatible = "wolfson,wm8994-codec";
+		};
+	};
+
+	i2c@12c60000 {
+		pmic@9 {
+			reg = <0x9>;
+			compatible = "maxim,max77686_pmic";
+		};
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */
+	};
+};
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
new file mode 100644
index 0000000..9b48a0c
--- /dev/null
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -0,0 +1,187 @@
+/*
+ * SAMSUNG Snow board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "Google Snow";
+	compatible = "google,snow", "samsung,exynos5250";
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		i2s = "/sound@3830000";
+	};
+
+	i2c4: i2c@12ca0000 {
+		cros-ec@1e {
+			reg = <0x1e>;
+			compatible = "google,cros-ec";
+			i2c-max-frequency = <100000>;
+			ec-interrupt = <&gpio 782 1>;
+		};
+
+		power-regulator@48 {
+			compatible = "ti,tps65090";
+			reg = <0x48>;
+		};
+	};
+
+	spi@131b0000 {
+		spi-max-frequency = <1000000>;
+		spi-deactivate-delay = <100>;
+		cros-ec@0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+			spi-max-frequency = <5000000>;
+			ec-interrupt = <&gpio 782 1>;
+			optimise-flash-write;
+			status = "disabled";
+		};
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "max98095";
+		codec-enable-gpio = <&gpio 0xb7 0>;
+	};
+
+	sound@12d60000 {
+		status = "disabled";
+	};
+
+	i2c@12cd0000 {
+		soundcodec@22 {
+			reg = <0x22>;
+			compatible = "maxim,max98095-codec";
+		};
+	};
+
+	i2c@12c60000 {
+		pmic@9 {
+			reg = <0x9>;
+			compatible = "maxim,max77686_pmic";
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	cros-ec-keyb {
+		compatible = "google,cros-ec-keyb";
+		google,key-rows = <8>;
+		google,key-columns = <13>;
+		google,repeat-delay-ms = <240>;
+		google,repeat-rate-ms = <30>;
+		google,ghost-filter;
+		/*
+		 * Keymap entries take the form of 0xRRCCKKKK where
+		 * RR=Row CC=Column KKKK=Key Code
+		 * The values below are for a US keyboard layout and
+		 * are taken from the Linux driver. Note that the
+		 * 102ND key is not used for US keyboards.
+		 */
+		linux,keymap = <
+			/* CAPSLCK F1         B          F10     */
+			0x0001003a 0x0002003b 0x00030030 0x00040044
+			/* N       =          R_ALT      ESC     */
+			0x00060031 0x0008000d 0x000a0064 0x01010001
+			/* F4      G          F7         H       */
+			0x0102003e 0x01030022 0x01040041 0x01060023
+			/* '       F9         BKSPACE    L_CTRL  */
+			0x01080028 0x01090043 0x010b000e 0x0200001d
+			/* TAB     F3         T          F6      */
+			0x0201000f 0x0202003d 0x02030014 0x02040040
+			/* ]       Y          102ND      [       */
+			0x0205001b 0x02060015 0x02070056 0x0208001a
+			/* F8      GRAVE      F2         5       */
+			0x02090042 0x03010029 0x0302003c 0x03030006
+			/* F5      6          -          \       */
+			0x0304003f 0x03060007 0x0308000c 0x030b002b
+			/* R_CTRL  A          D          F       */
+			0x04000061 0x0401001e 0x04020020 0x04030021
+			/* S       K          J          ;       */
+			0x0404001f 0x04050025 0x04060024 0x04080027
+			/* L       ENTER      Z          C       */
+			0x04090026 0x040b001c 0x0501002c 0x0502002e
+			/* V       X          ,          M       */
+			0x0503002f 0x0504002d 0x05050033 0x05060032
+			/* L_SHIFT /          .          SPACE   */
+			0x0507002a 0x05080035 0x05090034 0x050B0039
+			/* 1       3          4          2       */
+			0x06010002 0x06020004 0x06030005 0x06040003
+			/* 8       7          0          9       */
+			0x06050009 0x06060008 0x0608000b 0x0609000a
+			/* L_ALT   DOWN       RIGHT      Q       */
+			0x060a0038 0x060b006c 0x060c006a 0x07010010
+			/* E       R          W          I       */
+			0x07020012 0x07030013 0x07040011 0x07050017
+			/* U       R_SHIFT    P          O       */
+			0x07060016 0x07070036 0x07080019 0x07090018
+			/* UP      LEFT    */
+			0x070b0067 0x070c0069>;
+	};
+};
diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts
new file mode 100644
index 0000000..d739763
--- /dev/null
+++ b/arch/arm/dts/exynos5420-smdk5420.dts
@@ -0,0 +1,169 @@
+/*
+ * SAMSUNG SMDK5420 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos5420.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5420 board based on EXYNOS5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5";
+
+	config {
+		hwid = "smdk5420 TEST A-A 9382";
+	};
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		i2c8 = "/i2c@12e00000";
+		i2c9 = "/i2c@12e10000";
+		i2c10 = "/i2c@12e20000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		xhci0 = "/xhci@12000000";
+		xhci1 = "/xhci@12400000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* s2mps11 is on i2c bus 4 */
+	i2c@12ca0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pmic@66 {
+			reg = <0x66>;
+			compatible = "samsung,s2mps11-pmic";
+		};
+	};
+
+	spi@12d20000 { /* spi0 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+		};
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "wm8994";
+	};
+
+	i2c@12c70000 {
+		soundcodec@1a {
+			reg = <0x1a>;
+			compatible = "wolfson,wm8994-codec";
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	fimd@14400000 {
+		/* sysmmu is not used in U-Boot */
+		samsung,disable-sysmmu;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	dmc {
+		mem-type = "ddr3";
+	};
+
+	xhci1: xhci@12400000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12500000 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/dts/tegra114-dalmore.dts b/arch/arm/dts/tegra114-dalmore.dts
new file mode 100644
index 0000000..435c01e
--- /dev/null
+++ b/arch/arm/dts/tegra114-dalmore.dts
@@ -0,0 +1,71 @@
+/dts-v1/;
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA Dalmore";
+	compatible = "nvidia,dalmore", "nvidia,tegra114";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000400";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000400 {
+		cd-gpios = <&gpio 170 1>; /* gpio PV2 */
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	sdhci@78000600 {
+		bus-width = <8>;
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		/* SPDIF_IN: USB_VBUS_EN1 */
+		nvidia,vbus-gpio = <&gpio 86 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index 626cc3c..f52fcf1 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -139,7 +139,7 @@
 
 	spi@7000d800 {
 		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000d480 0x200>;
+		reg = <0x7000d800 0x200>;
 		interrupts = <0 83 0x04>;
 		nvidia,dma-request-selector = <&apbdma 17>;
 		#address-cells = <1>;
diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts
new file mode 100644
index 0000000..2f8d1dc
--- /dev/null
+++ b/arch/arm/dts/tegra124-venice2.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		i2c5 = "/i2c@7000d100";
+		sdhci0 = "/sdhci@700b0600";
+		sdhci1 = "/sdhci@700b0400";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000da00";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio 170 0>; /* gpio PV2 */
+		power-gpios = <&gpio 136 0>; /* gpio PR0 */
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */
+	};
+};
diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi
new file mode 100644
index 0000000..18a8b24
--- /dev/null
+++ b/arch/arm/dts/tegra124.dtsi
@@ -0,0 +1,250 @@
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra124";
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x60020000 0x1400>;
+		interrupts = <0 104 0x04
+			      0 105 0x04
+			      0 106 0x04
+			      0 107 0x04
+			      0 108 0x04
+			      0 109 0x04
+			      0 110 0x04
+			      0 111 0x04
+			      0 112 0x04
+			      0 113 0x04
+			      0 114 0x04
+			      0 115 0x04
+			      0 116 0x04
+			      0 117 0x04
+			      0 118 0x04
+			      0 119 0x04
+			      0 128 0x04
+			      0 129 0x04
+			      0 130 0x04
+			      0 131 0x04
+			      0 132 0x04
+			      0 133 0x04
+			      0 134 0x04
+			      0 135 0x04
+			      0 136 0x04
+			      0 137 0x04
+			      0 138 0x04
+			      0 139 0x04
+			      0 140 0x04
+			      0 141 0x04
+			      0 142 0x04
+			      0 143 0x04>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <0 32 0x04
+			      0 33 0x04
+			      0 34 0x04
+			      0 35 0x04
+			      0 55 0x04
+			      0 87 0x04
+			      0 89 0x04
+			      0 125 0x04>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>;
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <0 84 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 54>;
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <0 92 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 67>;
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <0 120 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 103>;
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 47>;
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000d100 0x100>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 47>;
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000d400 0x200>;
+		interrupts = <0 59 0x04>;
+		nvidia,dma-request-selector = <&apbdma 15>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 41>;
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000d600 0x200>;
+		interrupts = <0 82 0x04>;
+		nvidia,dma-request-selector = <&apbdma 16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 44>;
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000d800 0x200>;
+		interrupts = <0 83 0x04>;
+		nvidia,dma-request-selector = <&apbdma 17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 46>;
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000da00 0x200>;
+		interrupts = <0 93 0x04>;
+		nvidia,dma-request-selector = <&apbdma 18>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 68>;
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <0 94 0x04>;
+		nvidia,dma-request-selector = <&apbdma 27>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 104>;
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000de00 0x200>;
+		interrupts = <0 79 0x04>;
+		nvidia,dma-request-selector = <&apbdma 28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 105>;
+	};
+
+	sdhci@700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0000 0x200>;
+		interrupts = <0 14 0x04>;
+		clocks = <&tegra_car 14>;
+		status = "disabled";
+	};
+
+	sdhci@700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0200 0x200>;
+		interrupts = <0 15 0x04>;
+		clocks = <&tegra_car 9>;
+		status = "disabled";
+	};
+
+	sdhci@700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0400 0x200>;
+		interrupts = <0 19 0x04>;
+		clocks = <&tegra_car 69>;
+		status = "disabled";
+	};
+
+	sdhci@700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0600 0x200>;
+		interrupts = <0 31 0x04>;
+		clocks = <&tegra_car 15>;
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = < 52 >;
+		phy_type = "utmi";
+		clocks = <&tegra_car 22>;	/* PERIPH_ID_USBD */
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = < 53 >;
+		phy_type = "hsic";
+		clocks = <&tegra_car 58>;	/* PERIPH_ID_USB2 */
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = < 129 >;
+		phy_type = "utmi";
+		clocks = <&tegra_car 59>;	/* PERIPH_ID_USB3 */
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/dts/tegra20-colibri_t20_iris.dts b/arch/arm/dts/tegra20-colibri_t20_iris.dts
new file mode 100644
index 0000000..c0e54af
--- /dev/null
+++ b/arch/arm/dts/tegra20-colibri_t20_iris.dts
@@ -0,0 +1,45 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toradex Colibri T20";
+	compatible = "toradex,t20", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		usb2 = "/usb@c5004000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	usb@c5000000 {
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
+		nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
+	};
+
+	usb@c5008000 {
+		nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
+		nvidia,width = <8>;
+		nvidia,timing = <15 100 25 80 25 10 15 10 100>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "nand-flash";
+		};
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+		bus-width = <4>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-harmony.dts b/arch/arm/dts/tegra20-harmony.dts
new file mode 100644
index 0000000..b115f87
--- /dev/null
+++ b/arch/arm/dts/tegra20-harmony.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Harmony evaluation board";
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5004000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000200";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 23 0>;		/* PC7 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+	};
+
+	sdhci@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		clock = <42430000>;
+		xres = <1024>;
+		yres = <600>;
+		left-margin = <138>;
+		right-margin = <34>;
+		hsync-len = <136>;
+		lower-margin = <4>;
+		upper-margin = <21>;
+		vsync-len = <4>;
+		hsync-active-high;
+		vsyncx-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 0>;
+		nvidia,backlight-enable-gpios = <&gpio 13 0>;	/* PB5 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>;	/* PB2 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 22 0>;		/* PC6 */
+		nvidia,panel-timings = <0 0 200 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-medcom-wide.dts b/arch/arm/dts/tegra20-medcom-wide.dts
new file mode 100644
index 0000000..a9a07f9
--- /dev/null
+++ b/arch/arm/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide";
+	compatible = "ad,medcom-wide", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		status = "okay";
+
+		dc@54200000 {
+			status = "okay";
+
+			rgb {
+				nvidia,panel = <&lcd_panel>;
+				status = "okay";
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	lcd_panel: panel {
+		clock = <61715000>;
+		xres = <1366>;
+		yres = <768>;
+		left-margin = <2>;
+		right-margin = <47>;
+		hsync-len = <136>;
+		lower-margin = <21>;
+		upper-margin = <11>;
+		vsync-len = <4>;
+
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 500000>;
+		nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+		nvidia,panel-timings = <0 0 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
new file mode 100644
index 0000000..780203c
--- /dev/null
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		clock-frequency = < 216000000 >;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		cd-gpios = <&gpio 173 1>; /* gpio PV5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		/* PAZ00 has 1024x600 */
+		clock = <54030000>;
+		xres = <1024>;
+		yres = <600>;
+		right-margin = <160>;
+		left-margin = <24>;
+		hsync-len = <136>;
+		upper-margin = <3>;
+		lower-margin = <61>;
+		vsync-len = <6>;
+		hsync-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 0>;
+		nvidia,backlight-enable-gpios = <&gpio 164 0>;	/* PU4 */
+		nvidia,lvds-shutdown-gpios = <&gpio 102 0>;	/* PM6 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 4 0>;		/* PA4 */
+		nvidia,panel-timings = <400 4 203 17 15>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-plutux.dts b/arch/arm/dts/tegra20-plutux.dts
new file mode 100644
index 0000000..20016f2
--- /dev/null
+++ b/arch/arm/dts/tegra20-plutux.dts
@@ -0,0 +1,45 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux";
+	compatible = "ad,plutux", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts
new file mode 100644
index 0000000..c0e2e1e
--- /dev/null
+++ b/arch/arm/dts/tegra20-seaboard.dts
@@ -0,0 +1,191 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Seaboard";
+	compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+	chosen {
+		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
+	};
+
+	aliases {
+		/* This defines the order of our ports */
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = < 0x00000000 0x40000000 >;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	/* This is not used in U-Boot, but is expected to be in kernel .dts */
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+
+			clk_32k: clock {
+				compatible = "fixed-clock";
+				/*
+				 * leave out for now due to CPP:
+				 * #clock-cells = <0>;
+				 */
+				clock-frequency = <32768>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 59 0>;		/* PH3 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+	};
+
+	kbc@7000e200 {
+		linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c
+			0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006
+			0x03010005 0x03020013 0x03030012 0x03040021 0x03050020
+			0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023
+			0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a
+			0x05010009 0x05020016 0x05030015 0x05040024 0x05050031
+			0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018
+			0x06030017 0x06040026 0x06050025 0x06060033 0x06070032
+			0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036
+			0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019
+			0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044
+			0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067
+			0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068
+			0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057
+			0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d
+			0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f
+			0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040
+			0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f
+			0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050
+			0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053
+			0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072
+			0x1d0700e1 0x1e000045 0x1e010046 0x1e020071
+			0x1f04008a>;
+		linux,fn-keymap = <0x05040002>;
+	};
+
+	emc@7000f400 {
+		emc-table@190000 {
+			reg = < 190000 >;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 190000 >;
+			nvidia,emc-registers = < 0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000 >;
+		};
+		emc-table@380000 {
+			reg = < 380000 >;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 380000 >;
+			nvidia,emc-registers = < 0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000 >;
+		};
+	};
+
+	usb@c5000000 {
+		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		/* Seaboard has 1366x768 */
+		clock = <70600000>;
+		xres = <1366>;
+		yres = <768>;
+		left-margin = <58>;
+		right-margin = <58>;
+		hsync-len = <58>;
+		lower-margin = <4>;
+		upper-margin = <4>;
+		vsync-len = <4>;
+		hsync-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 2 0>;
+		nvidia,backlight-enable-gpios = <&gpio 28 0>;	/* PD4 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>;	/* PB2 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 22 0>;		/* PC6 */
+		nvidia,panel-timings = <400 4 203 17 15>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-tamonten.dtsi b/arch/arm/dts/tegra20-tamonten.dtsi
new file mode 100644
index 0000000..f379622
--- /dev/null
+++ b/arch/arm/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,500 @@
+#include "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		hdmi {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/dts/tegra20-tec.dts b/arch/arm/dts/tegra20-tec.dts
new file mode 100644
index 0000000..4c1b08d
--- /dev/null
+++ b/arch/arm/dts/tegra20-tec.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		status = "okay";
+
+		dc@54200000 {
+			status = "okay";
+
+			rgb {
+				nvidia,panel = <&lcd_panel>;
+				status = "okay";
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	lcd_panel: panel {
+		clock = <33260000>;
+		xres = <800>;
+		yres = <480>;
+		left-margin = <120>;
+		right-margin = <120>;
+		hsync-len = <16>;
+		lower-margin = <15>;
+		upper-margin = <15>;
+		vsync-len = <15>;
+
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 500000>;
+		nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+		nvidia,panel-timings = <0 0 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts
new file mode 100644
index 0000000..ee31476
--- /dev/null
+++ b/arch/arm/dts/tegra20-trimslice.dts
@@ -0,0 +1,64 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000000";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	serial@70006000 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	spi@7000c380 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 121 1>; /* gpio PP1 */
+		wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+		bus-width = <4>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-ventana.dts b/arch/arm/dts/tegra20-ventana.dts
new file mode 100644
index 0000000..1a526ba
--- /dev/null
+++ b/arch/arm/dts/tegra20-ventana.dts
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		clock = <72072000>;
+		xres = <1366>;
+		yres = <768>;
+		left-margin = <58>;
+		right-margin = <58>;
+		hsync-len = <58>;
+		lower-margin = <4>;
+		upper-margin = <4>;
+		vsync-len = <4>;
+		hsync-active-high;
+		vsync-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 2 0>;
+		nvidia,backlight-enable-gpios = <&gpio 28 0>;	/* PD4 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>;	/* PB2 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 22 0>;		/* PC6 */
+		nvidia,panel-timings = <0 0 200 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-whistler.dts b/arch/arm/dts/tegra20-whistler.dts
new file mode 100644
index 0000000..eb92264
--- /dev/null
+++ b/arch/arm/dts/tegra20-whistler.dts
@@ -0,0 +1,73 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Whistler evaluation board";
+	compatible = "nvidia,whistler", "nvidia,tegra20";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = < 0x00000000 0x20000000 >;
+	};
+
+	serial@70006000 {
+		clock-frequency = < 216000000 >;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+
+		pmic@3c {
+			compatible = "maxim,max8907b";
+			reg = <0x3c>;
+
+			clk_32k: clock {
+				compatible = "fixed-clock";
+				/*
+				 * leave out for now due to CPP:
+				 * #clock-cells = <0>;
+				 */
+				clock-frequency = <32768>;
+			};
+		};
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+		bus-width = <8>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+};
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
new file mode 100644
index 0000000..a7cc93e
--- /dev/null
+++ b/arch/arm/dts/tegra30-beaver.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Beaver";
+	compatible = "nvidia,beaver", "nvidia,tegra30";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000000";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7ff00000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d008000 {
+		nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts
new file mode 100644
index 0000000..ea2cf76
--- /dev/null
+++ b/arch/arm/dts/tegra30-cardhu.dts
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Cardhu";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000000";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d008000 {
+		nvidia,vbus-gpio = <&gpio 236 0>;	/* PDD4 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/tegra30-tamonten.dtsi b/arch/arm/dts/tegra30-tamonten.dtsi
new file mode 100644
index 0000000..50d5762
--- /dev/null
+++ b/arch/arm/dts/tegra30-tamonten.dtsi
@@ -0,0 +1,69 @@
+#include "tegra30.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten NG";
+	compatible = "ad,tamonten-ng", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000c000";
+		i2c1 = "/i2c@7000c700";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000d000";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000400";
+		sdhci2 = "/sdhci@78000000";
+		usb0 = "/usb@7d008000";
+	};
+
+	/* GEN1 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* GEN2 */
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	/* CAM */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* DDC */
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* PWR */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* SD slot on the base board */
+	sdhci@78000400 {
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 67 0>; /* gpio PI3 */
+		bus-width = <4>;
+	};
+
+	/* EMMC on the COM module */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+};
diff --git a/arch/arm/dts/tegra30-tec-ng.dts b/arch/arm/dts/tegra30-tec-ng.dts
new file mode 100644
index 0000000..8a69e81
--- /dev/null
+++ b/arch/arm/dts/tegra30-tec-ng.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+#include "tegra30-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten™ NG Evaluation Carrier";
+	compatible = "ad,tec-ng", "nvidia,tegra30";
+
+	/* GEN2 */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* SD card slot */
+	sdhci@78000400 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
new file mode 100644
index 0000000..6da71c1
--- /dev/null
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx MicroZED board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Board";
+	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
new file mode 100644
index 0000000..667dc28
--- /dev/null
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC702 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC702 Board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
new file mode 100644
index 0000000..526fc88
--- /dev/null
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC706 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC706 Board";
+	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
new file mode 100644
index 0000000..8b542a1
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC770 XM010 Board";
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
new file mode 100644
index 0000000..0379a07
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC770 XM012 Board";
+	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
new file mode 100644
index 0000000..a4f9e05
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC770 XM013 Board";
+	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
new file mode 100644
index 0000000..91a5deb
--- /dev/null
+++ b/arch/arm/dts/zynq-zed.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZED board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZED Board";
+	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index ee5c872..16809fe 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -23,37 +23,54 @@ endif
 obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
 obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
 
-$(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp: $(OBJTREE)/%.cfgtmp : $(SRCTREE)/%
-	mkdir -p $(dir $@)
-	$(CC) -E -x c $< $(CPPFLAGS) -o $@
-
-$(OBJTREE)/u-boot.imx: $(OBJTREE)/u-boot.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp
-	$(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \
-	-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
-
-$(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp
-	$(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \
-	-e $(CONFIG_SPL_TEXT_BASE) -d $< $@
-
-$(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
-	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
-		-I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx
-	$(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
-		-e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \
-		$(OBJTREE)/u-boot.uim
-	cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim > $@
-	rm $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim
-
-$(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
-	(echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \
-			dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | \
-		cat - $< > $(OBJTREE)/spl/u-boot-nand-spl.imx
-	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
-		-I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \
-		$(OBJTREE)/spl/u-boot-nand-spl-pad.imx
-	rm $(OBJTREE)/spl/u-boot-nand-spl.imx
-	$(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
-		-e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \
-		$(OBJTREE)/u-boot.uim
-	cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim > $@
-	rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim
+quiet_cmd_cpp_cfg = CFGS    $@
+      cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+
+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
+
+$(IMX_CONFIG): %.cfgtmp: % FORCE
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,cpp_cfg)
+
+quiet_cmd_mkimage = UIMAGE  $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $< $(PHONY),$^) -T imximage \
+	-e $(CONFIG_SYS_TEXT_BASE)
+
+u-boot.imx: u-boot.bin $(IMX_CONFIG) FORCE
+	$(call if_changed,mkimage)
+
+MKIMAGEFLAGS_SPL = -n $(filter-out $< $(PHONY),$^) -T imximage \
+	-e $(CONFIG_SPL_TEXT_BASE)
+
+SPL: spl/u-boot-spl.bin $(IMX_CONFIG) FORCE
+	$(call if_changed,mkimage)
+
+MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+		-e $(CONFIG_SYS_TEXT_BASE) -C none
+
+u-boot.uim: u-boot.bin FORCE
+	$(call if_changed,mkimage)
+
+OBJCOPYFLAGS += -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+append = cat $(filter-out $< $(PHONY), $^) >> $@
+
+quiet_cmd_pad_cat = CAT     $@
+cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
+
+u-boot-with-spl.imx: SPL u-boot.uim FORCE
+	$(call if_changed,pad_cat)
+
+u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE
+	$(call if_changed,pad_cat)
+
+quiet_cmd_u-boot-nand-spl_imx = GEN     $@
+cmd_u-boot-nand-spl_imx = (echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \
+	dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@
+
+spl/u-boot-nand-spl.imx: SPL FORCE
+	$(call if_changed,u-boot-nand-spl_imx)
+
+targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 9febfa2..71bed4e 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -171,7 +171,8 @@ struct cm_wkuppll {
 	unsigned int resv11[1];
 	unsigned int wkup_uart0ctrl;	/* offset 0xB4 */
 	unsigned int wkup_i2c0ctrl;	/* offset 0xB8 */
-	unsigned int resv12[7];
+	unsigned int wkup_adctscctrl;	/* offset 0xBC */
+	unsigned int resv12[6];
 	unsigned int divm6dpllcore;	/* offset 0xD8 */
 };
 
@@ -221,7 +222,8 @@ struct cm_perpll {
 	unsigned int tpccclkctrl;	/* offset 0xBC */
 	unsigned int dcan0clkctrl;	/* offset 0xC0 */
 	unsigned int dcan1clkctrl;	/* offset 0xC4 */
-	unsigned int resv6[2];
+	unsigned int resv6;
+	unsigned int epwmss1clkctrl;	/* offset 0xCC */
 	unsigned int emiffwclkctrl;	/* offset 0xD0 */
 	unsigned int epwmss0clkctrl;	/* offset 0xD4 */
 	unsigned int epwmss2clkctrl;	/* offset 0xD8 */
@@ -332,7 +334,9 @@ struct cm_perpll {
 	unsigned int mcasp1clkctrl;	/* offset 0x240 */
 	unsigned int resv11;
 	unsigned int mmc2clkctrl;	/* offset 0x248 */
-	unsigned int resv12[5];
+	unsigned int resv12[3];
+	unsigned int qspiclkctrl;       /* offset 0x258 */
+	unsigned int resv121;
 	unsigned int usb0clkctrl;	/* offset 0x260 */
 	unsigned int resv13[103];
 	unsigned int l4lsclkstctrl;	/* offset 0x400 */
@@ -351,7 +355,11 @@ struct cm_perpll {
 	unsigned int gpio2clkctrl;	/* offset 0x480 */
 	unsigned int resv20;
 	unsigned int gpio3clkctrl;	/* offset 0x488 */
-	unsigned int resv21[7];
+	unsigned int resv41;
+	unsigned int gpio4clkctrl;	/* offset 0x490 */
+	unsigned int resv42;
+	unsigned int gpio5clkctrl;	/* offset 0x498 */
+	unsigned int resv21[3];
 
 	unsigned int i2c1clkctrl;	/* offset 0x4A8 */
 	unsigned int resv22;
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index fbe599d..4d89952 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -58,6 +58,22 @@
 #define MT41J128MJT125_PHY_FIFO_WE		0x100
 #define MT41J128MJT125_IOCTRL_VALUE		0x18B
 
+/* Micron MT41K128M16JT-187E */
+#define MT41K128MJT187E_EMIF_READ_LATENCY	0x06
+#define MT41K128MJT187E_EMIF_TIM1		0x0888B3DB
+#define MT41K128MJT187E_EMIF_TIM2		0x36337FDA
+#define MT41K128MJT187E_EMIF_TIM3		0x501F830F
+#define MT41K128MJT187E_EMIF_SDCFG		0x61C04AB2
+#define MT41K128MJT187E_EMIF_SDREF		0x0000093B
+#define MT41K128MJT187E_ZQ_CFG			0x50074BE4
+#define MT41K128MJT187E_RATIO			0x40
+#define MT41K128MJT187E_INVERT_CLKOUT		0x1
+#define MT41K128MJT187E_RD_DQS			0x3B
+#define MT41K128MJT187E_WR_DQS			0x85
+#define MT41K128MJT187E_PHY_WR_DATA		0xC1
+#define MT41K128MJT187E_PHY_FIFO_WE		0x100
+#define MT41K128MJT187E_IOCTRL_VALUE		0x18B
+
 /* Micron MT41J64M16JT-125 */
 #define MT41J64MJT125_EMIF_SDCFG		0x61C04A32
 
diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h
index a1ffd49..220603d 100644
--- a/arch/arm/include/asm/arch-am33xx/gpio.h
+++ b/arch/arm/include/asm/arch-am33xx/gpio.h
@@ -12,8 +12,8 @@
 #define AM33XX_GPIO1_BASE       0x4804C000
 #define AM33XX_GPIO2_BASE       0x481AC000
 #define AM33XX_GPIO3_BASE       0x481AE000
-
-#define GPIO_22			22
+#define AM33XX_GPIO4_BASE	0x48320000
+#define AM33XX_GPIO5_BASE	0x48322000
 
 /* GPIO CTRL register */
 #define GPIO_CTRL_DISABLEMODULE_SHIFT	0
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index 7a7d91b..0855d16 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -29,5 +29,6 @@
 #define SRAM_SCRATCH_SPACE_ADDR	0x40337C00
 #define AM4372_BOARD_NAME_START	SRAM_SCRATCH_SPACE_ADDR
 #define AM4372_BOARD_NAME_END	SRAM_SCRATCH_SPACE_ADDR + 0xC
+#define QSPI_BASE              0x47900000
 #endif
 #endif
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 87b7d36..2e5c356 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -17,10 +17,6 @@
 u32 get_cpu_rev(void);
 u32 get_sysboot_value(void);
 
-#ifdef CONFIG_DISPLAY_CPUINFO
-int print_cpuinfo(void);
-#endif
-
 extern struct ctrl_stat *cstat;
 u32 get_device_type(void);
 void save_omap_boot_params(void);
diff --git a/arch/arm/include/asm/arch-bcm281xx/gpio.h b/arch/arm/include/asm/arch-bcm281xx/gpio.h
new file mode 100644
index 0000000..1b40a96
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcm281xx/gpio.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __ARCH_BCM281XX_GPIO_H
+#define __ARCH_BCM281XX_GPIO_H
+
+/*
+ * Empty file - cmd_gpio.c requires this. The implementation
+ * is in drivers/gpio/kona_gpio.c instead of inlined here.
+ */
+
+#endif
diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
new file mode 100644
index 0000000..880b4e0
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __ARCH_BCM281XX_SYSMAP_H
+
+#define BSC1_BASE_ADDR		0x3e016000
+#define BSC2_BASE_ADDR		0x3e017000
+#define BSC3_BASE_ADDR		0x3e018000
+#define GPIO2_BASE_ADDR		0x35003000
+#define KONA_MST_CLK_BASE_ADDR	0x3f001000
+#define KONA_SLV_CLK_BASE_ADDR	0x3e011000
+#define PMU_BSC_BASE_ADDR	0x3500d000
+#define PWRMGR_BASE_ADDR	0x35010000
+#define SDIO1_BASE_ADDR		0x3f180000
+#define SDIO2_BASE_ADDR		0x3f190000
+#define SDIO3_BASE_ADDR		0x3f1a0000
+#define SDIO4_BASE_ADDR		0x3f1b0000
+#define SECWD_BASE_ADDR		0x3500c000
+#define SECWD2_BASE_ADDR	0x35002f40
+#define TIMER_BASE_ADDR		0x3e00d000
+
+#endif
diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
index 38cb42a..dded857 100644
--- a/arch/arm/include/asm/arch-bcm2835/mbox.h
+++ b/arch/arm/include/asm/arch-bcm2835/mbox.h
@@ -143,7 +143,7 @@ struct bcm2835_mbox_tag_get_arm_mem {
 #define BCM2835_MBOX_POWER_DEVID_SPI		7
 #define BCM2835_MBOX_POWER_DEVID_CCP2TX		8
 
-#define BCM2835_MBOX_POWER_STATE_RESP_ON	(1 << 1)
+#define BCM2835_MBOX_POWER_STATE_RESP_ON	(1 << 0)
 /* Device doesn't exist */
 #define BCM2835_MBOX_POWER_STATE_RESP_NODEV	(1 << 1)
 
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 573f755..bccce63 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -185,9 +185,11 @@ static inline int s5p_get_cpu_rev(void)
 
 static inline void s5p_set_cpu_id(void)
 {
-	unsigned int pro_id = (readl(EXYNOS4_PRO_ID) & 0x00FFF000) >> 12;
+	unsigned int pro_id = readl(EXYNOS4_PRO_ID);
+	unsigned int cpu_id = (pro_id & 0x00FFF000) >> 12;
+	unsigned int cpu_rev = pro_id & 0x000000FF;
 
-	switch (pro_id) {
+	switch (cpu_id) {
 	case 0x200:
 		/* Exynos4210 EVT0 */
 		s5p_cpu_id = 0x4210;
@@ -196,10 +198,12 @@ static inline void s5p_set_cpu_id(void)
 	case 0x210:
 		/* Exynos4210 EVT1 */
 		s5p_cpu_id = 0x4210;
+		s5p_cpu_rev = cpu_rev;
 		break;
 	case 0x412:
 		/* Exynos4412 */
 		s5p_cpu_id = 0x4412;
+		s5p_cpu_rev = cpu_rev;
 		break;
 	case 0x520:
 		/* Exynos5250 */
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
index 09d739d..a7ca12c 100644
--- a/arch/arm/include/asm/arch-exynos/dwmmc.h
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -23,6 +23,10 @@
 #define MPSCTRL_ENCRYPTION		(0x1<<1)
 #define MPSCTRL_VALID			(0x1<<0)
 
+/* CLKSEL Register */
+#define DWMCI_DIVRATIO_BIT		24
+#define DWMCI_DIVRATIO_MASK		0x7
+
 #ifdef CONFIG_OF_CONTROL
 int exynos_dwmmc_init(const void *blob);
 #endif
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index 2a19852..d6868fa 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -247,180 +247,81 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
 
 /* GPIO pins per bank  */
 #define GPIO_PER_BANK 8
-
-#define exynos4_gpio_part1_get_nr(bank, pin) \
-	((((((unsigned int) &(((struct exynos4_gpio_part1 *) \
-			       EXYNOS4_GPIO_PART1_BASE)->bank)) \
-	    - EXYNOS4_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin)
-
-#define EXYNOS4_GPIO_PART1_MAX ((sizeof(struct exynos4_gpio_part1) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos4_gpio_part2_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos4_gpio_part2 *) \
-				EXYNOS4_GPIO_PART2_BASE)->bank)) \
-	    - EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS4_GPIO_PART1_MAX)
-
-#define exynos4x12_gpio_part1_get_nr(bank, pin) \
-	((((((unsigned int) &(((struct exynos4x12_gpio_part1 *) \
-			       EXYNOS4X12_GPIO_PART1_BASE)->bank)) \
-	    - EXYNOS4X12_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin)
-
-#define EXYNOS4X12_GPIO_PART1_MAX ((sizeof(struct exynos4x12_gpio_part1) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos4x12_gpio_part2_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos4x12_gpio_part2 *) \
-				EXYNOS4X12_GPIO_PART2_BASE)->bank)) \
-	    - EXYNOS4X12_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART1_MAX)
-
-#define EXYNOS4X12_GPIO_PART2_MAX ((sizeof(struct exynos4x12_gpio_part2) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos4x12_gpio_part3_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos4x12_gpio_part3 *) \
-				EXYNOS4X12_GPIO_PART3_BASE)->bank)) \
-	    - EXYNOS4X12_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART2_MAX)
-
-#define exynos5_gpio_part1_get_nr(bank, pin) \
-	((((((unsigned int) &(((struct exynos5_gpio_part1 *) \
-			       EXYNOS5_GPIO_PART1_BASE)->bank)) \
-	    - EXYNOS5_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin)
-
-#define EXYNOS5_GPIO_PART1_MAX ((sizeof(struct exynos5_gpio_part1) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos5_gpio_part2_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos5_gpio_part2 *) \
-				EXYNOS5_GPIO_PART2_BASE)->bank)) \
-	    - EXYNOS5_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART1_MAX)
-
-#define EXYNOS5_GPIO_PART2_MAX ((sizeof(struct exynos5_gpio_part2) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos5_gpio_part3_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos5_gpio_part3 *) \
-				EXYNOS5_GPIO_PART3_BASE)->bank)) \
-	    - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX)
-
-
-/* EXYNOS5420 */
-#define exynos5420_gpio_part1_get_nr(bank, pin) \
-	((((((unsigned int) &(((struct exynos5420_gpio_part1 *)\
-			       EXYNOS5420_GPIO_PART1_BASE)->bank)) \
-	    - EXYNOS5420_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin)
-
-#define EXYNOS5420_GPIO_PART1_MAX ((sizeof(struct exynos5420_gpio_part1) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos5420_gpio_part2_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos5420_gpio_part2 *)\
-				EXYNOS5420_GPIO_PART2_BASE)->bank)) \
-	    - EXYNOS5420_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART1_MAX)
-
-#define EXYNOS5420_GPIO_PART2_MAX ((sizeof(struct exynos5420_gpio_part2) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos5420_gpio_part3_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos5420_gpio_part3 *)\
-				EXYNOS5420_GPIO_PART3_BASE)->bank)) \
-	    - EXYNOS5420_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART2_MAX)
-
-#define EXYNOS5420_GPIO_PART3_MAX ((sizeof(struct exynos5420_gpio_part3) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos5420_gpio_part4_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct exynos5420_gpio_part4 *)\
-				EXYNOS5420_GPIO_PART4_BASE)->bank)) \
-	    - EXYNOS5420_GPIO_PART4_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART3_MAX)
-
-#define EXYNOS5420_GPIO_PART4_MAX ((sizeof(struct exynos5420_gpio_part4) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define EXYNOS5420_GPIO_PART5_MAX ((sizeof(struct exynos5420_gpio_part5) \
-			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-static inline unsigned int s5p_gpio_base(int nr)
+#define S5P_GPIO_PART_SHIFT	(24)
+#define S5P_GPIO_PART_MASK	(0xff)
+#define S5P_GPIO_BANK_SHIFT	(8)
+#define S5P_GPIO_BANK_MASK	(0xffff)
+#define S5P_GPIO_PIN_MASK	(0xff)
+
+#define S5P_GPIO_SET_PART(x) \
+			(((x) & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT)
+
+#define S5P_GPIO_GET_PART(x) \
+			(((x) >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK)
+
+#define S5P_GPIO_SET_PIN(x) \
+			((x) & S5P_GPIO_PIN_MASK)
+
+#define EXYNOS4_GPIO_SET_BANK(part, bank) \
+			((((unsigned)&(((struct exynos4_gpio_part##part *) \
+			EXYNOS4_GPIO_PART##part##_BASE)->bank) \
+			- EXYNOS4_GPIO_PART##part##_BASE) \
+			& S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define EXYNOS4X12_GPIO_SET_BANK(part, bank) \
+			((((unsigned)&(((struct exynos4x12_gpio_part##part *) \
+			EXYNOS4X12_GPIO_PART##part##_BASE)->bank) \
+			- EXYNOS4X12_GPIO_PART##part##_BASE) \
+			& S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define EXYNOS5_GPIO_SET_BANK(part, bank) \
+			((((unsigned)&(((struct exynos5420_gpio_part##part *) \
+			EXYNOS5420_GPIO_PART##part##_BASE)->bank) \
+			- EXYNOS5_GPIO_PART##part##_BASE) \
+			& S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define EXYNOS5420_GPIO_SET_BANK(part, bank) \
+			((((unsigned)&(((struct exynos5420_gpio_part##part *) \
+			EXYNOS5420_GPIO_PART##part##_BASE)->bank) \
+			- EXYNOS5420_GPIO_PART##part##_BASE) \
+			& S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define exynos4_gpio_get(part, bank, pin) \
+			(S5P_GPIO_SET_PART(part) | \
+			EXYNOS4_GPIO_SET_BANK(part, bank) | \
+			S5P_GPIO_SET_PIN(pin))
+
+#define exynos4x12_gpio_get(part, bank, pin) \
+			(S5P_GPIO_SET_PART(part) | \
+			EXYNOS4X12_GPIO_SET_BANK(part, bank) | \
+			S5P_GPIO_SET_PIN(pin))
+
+#define exynos5420_gpio_get(part, bank, pin) \
+			(S5P_GPIO_SET_PART(part) | \
+			EXYNOS5420_GPIO_SET_BANK(part, bank) | \
+			S5P_GPIO_SET_PIN(pin))
+
+#define exynos5_gpio_get(part, bank, pin) \
+			(S5P_GPIO_SET_PART(part) | \
+			EXYNOS5_GPIO_SET_BANK(part, bank) | \
+			S5P_GPIO_SET_PIN(pin))
+
+static inline unsigned int s5p_gpio_base(int gpio)
 {
-	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420()) {
-			if (nr < EXYNOS5420_GPIO_PART1_MAX)
-				return EXYNOS5420_GPIO_PART1_BASE;
-			else if (nr < EXYNOS5420_GPIO_PART2_MAX)
-				return EXYNOS5420_GPIO_PART2_BASE;
-			else if (nr < EXYNOS5420_GPIO_PART3_MAX)
-				return EXYNOS5420_GPIO_PART3_BASE;
-			else
-				return EXYNOS5420_GPIO_PART4_BASE;
-		} else {
-			if (nr < EXYNOS5_GPIO_PART1_MAX)
-				return EXYNOS5_GPIO_PART1_BASE;
-			else if (nr < EXYNOS5_GPIO_PART2_MAX)
-				return EXYNOS5_GPIO_PART2_BASE;
-			else
-				return EXYNOS5_GPIO_PART3_BASE;
-		}
-	} else if (cpu_is_exynos4()) {
-		if (nr < EXYNOS4_GPIO_PART1_MAX)
-			return EXYNOS4_GPIO_PART1_BASE;
-		else
-			return EXYNOS4_GPIO_PART2_BASE;
+	unsigned gpio_part = S5P_GPIO_GET_PART(gpio);
+
+	switch (gpio_part) {
+	case 1:
+		return samsung_get_base_gpio_part1();
+	case 2:
+		return samsung_get_base_gpio_part2();
+	case 3:
+		return samsung_get_base_gpio_part3();
+	case 4:
+		return samsung_get_base_gpio_part4();
+	default:
+		return 0;
 	}
-
-	return 0;
-}
-
-static inline unsigned int s5p_gpio_part_max(int nr)
-{
-	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420()) {
-			if (nr < EXYNOS5420_GPIO_PART1_MAX)
-				return 0;
-			else if (nr < EXYNOS5420_GPIO_PART2_MAX)
-				return EXYNOS5420_GPIO_PART1_MAX;
-			else if (nr < EXYNOS5420_GPIO_PART3_MAX)
-				return EXYNOS5420_GPIO_PART2_MAX;
-			else if (nr < EXYNOS5420_GPIO_PART4_MAX)
-				return EXYNOS5420_GPIO_PART3_MAX;
-			else
-				return EXYNOS5420_GPIO_PART4_MAX;
-		} else {
-			if (nr < EXYNOS5_GPIO_PART1_MAX)
-				return 0;
-			else if (nr < EXYNOS5_GPIO_PART2_MAX)
-				return EXYNOS5_GPIO_PART1_MAX;
-			else
-				return EXYNOS5_GPIO_PART2_MAX;
-		}
-	} else if (cpu_is_exynos4()) {
-		if (proid_is_exynos4412()) {
-			if (nr < EXYNOS4X12_GPIO_PART1_MAX)
-				return 0;
-			else if (nr < EXYNOS4X12_GPIO_PART2_MAX)
-				return EXYNOS4X12_GPIO_PART1_MAX;
-			else
-				return EXYNOS4X12_GPIO_PART2_MAX;
-		} else {
-			if (nr < EXYNOS4_GPIO_PART1_MAX)
-				return 0;
-			else
-				return EXYNOS4_GPIO_PART1_MAX;
-		}
-	}
-
-	return 0;
 }
 #endif
 
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 30c7f18..5c1c3d4 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -36,7 +36,6 @@ enum periph_id {
 	PERIPH_ID_SDMMC3,
 	PERIPH_ID_I2C8 = 87,
 	PERIPH_ID_I2C9,
-	PERIPH_ID_I2C10 = 203,
 	PERIPH_ID_I2S0 = 98,
 	PERIPH_ID_I2S1 = 99,
 
@@ -54,8 +53,8 @@ enum periph_id {
 	PERIPH_ID_PWM2,
 	PERIPH_ID_PWM3,
 	PERIPH_ID_PWM4,
+	PERIPH_ID_I2C10 = 203,
 
-	PERIPH_ID_COUNT,
 	PERIPH_ID_NONE = -1,
 };
 
diff --git a/arch/arm/include/asm/arch-ixp/ixp425.h b/arch/arm/include/asm/arch-ixp/ixp425.h
deleted file mode 100644
index c2e9c82..0000000
--- a/arch/arm/include/asm/arch-ixp/ixp425.h
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * include/asm-arm/arch-ixp425/ixp425.h
- *
- * Register definitions for IXP425
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_ARM_IXP425_H_
-#define _ASM_ARM_IXP425_H_
-
-#define BIT(x)	(1<<(x))
-
-/* FIXME: Only this does work for u-boot... find out why... [RS] */
-#define UBOOT_REG_FIX 1
-#ifdef UBOOT_REG_FIX
-# undef	io_p2v
-# undef __REG
-# ifndef __ASSEMBLY__
-#  define io_p2v(PhAdd)    (PhAdd)
-#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-#  define __REG2(x,y)	(*(volatile u32 *)((u32)&__REG(x) + (y)))
-# else
-#  define __REG(x) (x)
-# endif
-#endif /* UBOOT_REG_FIX */
-
-/*
- *
- * IXP425 Memory map:
- *
- * Phy		Phy Size	Map Size	Virt		Description
- * =========================================================================
- *
- * 0x00000000	0x10000000					SDRAM 1
- *
- * 0x10000000	0x10000000					SDRAM 2
- *
- * 0x20000000	0x10000000					SDRAM 3
- *
- * 0x30000000	0x10000000					SDRAM 4
- *
- * The above four are aliases to the same memory location  (0x00000000)
- *
- * 0x48000000	 0x4000000					PCI Memory
- *
- * 0x50000000	0x10000000			Not Mapped	EXP BUS
- *
- * 0x6000000	0x00004000	    0x4000	0xFFFEB000	QMgr
- *
- * 0xC0000000	     0x100	    0x1000	0xFFFDD000	PCI CFG
- *
- * 0xC4000000	     0x100          0x1000	0xFFFDE000	EXP CFG
- *
- * 0xC8000000	    0xC000          0xC000	0xFFFDF000	PERIPHERAL
- *
- * 0xCC000000	     0x100	    0x1000	Not Mapped	SDRAM CFG
- */
-
-/*
- * SDRAM
- */
-#define IXP425_SDRAM_BASE		(0x00000000)
-#define IXP425_SDRAM_BASE_ALT		(0x10000000)
-
-
-/*
- * PCI Configuration space
- */
-#define IXP425_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define IXP425_PCI_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP425_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP425_EXP_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP425_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP425_PERIPHERAL_REGION_SIZE	(0x0000C000)
-
-/*
- * SDRAM configuration registers
- */
-#define IXP425_SDRAM_CFG_BASE_PHYS	(0xCC000000)
-
-/*
- * Q Manager space .. not static mapped
- */
-#define IXP425_QMGR_BASE_PHYS		(0x60000000)
-#define IXP425_QMGR_REGION_SIZE		(0x00004000)
-
-/*
- * Expansion BUS
- *
- * Expansion Bus 'lives' at either base1 or base 2 depending on the value of
- * Exp Bus config registers:
- *
- * Setting bit 31 of IXP425_EXP_CFG0 puts SDRAM at zero,
- * and The expansion bus to IXP425_EXP_BUS_BASE2
- */
-#define IXP425_EXP_BUS_BASE1_PHYS	(0x00000000)
-#define IXP425_EXP_BUS_BASE2_PHYS	(0x50000000)
-
-#define IXP425_EXP_BUS_BASE_PHYS	IXP425_EXP_BUS_BASE2_PHYS
-
-#define IXP425_EXP_BUS_REGION_SIZE	(0x08000000)
-#define IXP425_EXP_BUS_CSX_REGION_SIZE	(0x01000000)
-
-#define IXP425_EXP_BUS_CS0_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x00000000)
-#define IXP425_EXP_BUS_CS1_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x01000000)
-#define IXP425_EXP_BUS_CS2_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x02000000)
-#define IXP425_EXP_BUS_CS3_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x03000000)
-#define IXP425_EXP_BUS_CS4_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x04000000)
-#define IXP425_EXP_BUS_CS5_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x05000000)
-#define IXP425_EXP_BUS_CS6_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x06000000)
-#define IXP425_EXP_BUS_CS7_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x07000000)
-
-#define IXP425_FLASH_WRITABLE	(0x2)
-#define IXP425_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP425_FLASH_WRITE	(0xbcd23c42)
-
-#define IXP425_EXP_CS0_OFFSET	0x00
-#define IXP425_EXP_CS1_OFFSET   0x04
-#define IXP425_EXP_CS2_OFFSET   0x08
-#define IXP425_EXP_CS3_OFFSET   0x0C
-#define IXP425_EXP_CS4_OFFSET   0x10
-#define IXP425_EXP_CS5_OFFSET   0x14
-#define IXP425_EXP_CS6_OFFSET   0x18
-#define IXP425_EXP_CS7_OFFSET   0x1C
-#define IXP425_EXP_CFG0_OFFSET	0x20
-#define IXP425_EXP_CFG1_OFFSET	0x24
-#define IXP425_EXP_CFG2_OFFSET	0x28
-#define IXP425_EXP_CFG3_OFFSET	0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#ifndef __ASSEMBLY__
-#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_PHYS+(x)))
-#else
-#define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x))
-#endif
-
-#define IXP425_EXP_CS0      IXP425_EXP_REG(IXP425_EXP_CS0_OFFSET)
-#define IXP425_EXP_CS1      IXP425_EXP_REG(IXP425_EXP_CS1_OFFSET)
-#define IXP425_EXP_CS2      IXP425_EXP_REG(IXP425_EXP_CS2_OFFSET)
-#define IXP425_EXP_CS3      IXP425_EXP_REG(IXP425_EXP_CS3_OFFSET)
-#define IXP425_EXP_CS4      IXP425_EXP_REG(IXP425_EXP_CS4_OFFSET)
-#define IXP425_EXP_CS5      IXP425_EXP_REG(IXP425_EXP_CS5_OFFSET)
-#define IXP425_EXP_CS6      IXP425_EXP_REG(IXP425_EXP_CS6_OFFSET)
-#define IXP425_EXP_CS7      IXP425_EXP_REG(IXP425_EXP_CS7_OFFSET)
-
-#define IXP425_EXP_CFG0     IXP425_EXP_REG(IXP425_EXP_CFG0_OFFSET)
-#define IXP425_EXP_CFG1     IXP425_EXP_REG(IXP425_EXP_CFG1_OFFSET)
-#define IXP425_EXP_CFG2     IXP425_EXP_REG(IXP425_EXP_CFG2_OFFSET)
-#define IXP425_EXP_CFG3     IXP425_EXP_REG(IXP425_EXP_CFG3_OFFSET)
-
-/*
- * SDRAM Controller registers.
- */
-#define IXP425_SDR_CONFIG_OFFSET	0x00
-#define IXP425_SDR_REFRESH_OFFSET	0x04
-#define IXP425_SDR_IR_OFFSET		0x08
-
-#define IXP425_SDRAM_REG(x)	(IXP425_SDRAM_CFG_BASE_PHYS+(x))
-
-#define IXP425_SDR_CONFIG	IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET)
-#define IXP425_SDR_REFRESH	IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
-#define IXP425_SDR_IR		IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
-
-/*
- * UART registers
- */
-#define IXP425_UART1		0
-#define IXP425_UART2		0x1000
-
-#define IXP425_UART_RBR_OFFSET	0x00
-#define IXP425_UART_THR_OFFSET	0x00
-#define IXP425_UART_DLL_OFFSET	0x00
-#define IXP425_UART_IER_OFFSET	0x04
-#define IXP425_UART_DLH_OFFSET	0x04
-#define IXP425_UART_IIR_OFFSET	0x08
-#define IXP425_UART_FCR_OFFSET	0x00
-#define IXP425_UART_LCR_OFFSET	0x0c
-#define IXP425_UART_MCR_OFFSET	0x10
-#define IXP425_UART_LSR_OFFSET	0x14
-#define IXP425_UART_MSR_OFFSET	0x18
-#define IXP425_UART_SPR_OFFSET	0x1c
-#define IXP425_UART_ISR_OFFSET	0x20
-
-#define IXP425_UART_CFG_BASE_PHYS	(0xc8000000)
-
-#define RBR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_RBR_OFFSET)
-#define THR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_THR_OFFSET)
-#define DLL(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLL_OFFSET)
-#define IER(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IER_OFFSET)
-#define DLH(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLH_OFFSET)
-#define IIR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IIR_OFFSET)
-#define FCR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_FCR_OFFSET)
-#define LCR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LCR_OFFSET)
-#define MCR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MCR_OFFSET)
-#define LSR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LSR_OFFSET)
-#define MSR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MSR_OFFSET)
-#define SPR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_SPR_OFFSET)
-#define ISR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_ISR_OFFSET)
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)	*/
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-#define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS
-/*
- * Peripheral Space Registers
- */
-#define IXP425_UART1_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP425_UART2_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP425_PMU_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP425_INTC_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP425_GPIO_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP425_TIMER_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP425_NPEA_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP425_NPEB_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP425_NPEC_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP425_EthA_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP425_EthB_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP425_USB_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0xB000)
-
-/*
- * UART Register Definitions , Offsets only as there are 2 UARTS.
- *   IXP425_UART1_BASE , IXP425_UART2_BASE.
- */
-
-#undef  UART_NO_RX_INTERRUPT
-
-#define IXP425_UART_XTAL        14745600
-
-/*
- * Constants to make it easy to access  Interrupt Controller registers
- */
-#define IXP425_ICPR_OFFSET	0x00 /* Interrupt Status */
-#define IXP425_ICMR_OFFSET	0x04 /* Interrupt Enable */
-#define IXP425_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP425_ICIP_OFFSET      0x0C /* IRQ Status */
-#define IXP425_ICFP_OFFSET	0x10 /* FIQ Status */
-#define IXP425_ICHR_OFFSET	0x14 /* Interrupt Priority */
-#define IXP425_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
-#define IXP425_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
-
-#define N_IRQS			32
-#define IXP425_TIMER_2_IRQ	11
-
-/*
- * Interrupt Controller Register Definitions.
- */
-#ifndef __ASSEMBLY__
-#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_PHYS+(x)))
-#else
-#define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x))
-#endif
-
-#define IXP425_ICPR     IXP425_INTC_REG(IXP425_ICPR_OFFSET)
-#define IXP425_ICMR     IXP425_INTC_REG(IXP425_ICMR_OFFSET)
-#define IXP425_ICLR     IXP425_INTC_REG(IXP425_ICLR_OFFSET)
-#define IXP425_ICIP     IXP425_INTC_REG(IXP425_ICIP_OFFSET)
-#define IXP425_ICFP     IXP425_INTC_REG(IXP425_ICFP_OFFSET)
-#define IXP425_ICHR     IXP425_INTC_REG(IXP425_ICHR_OFFSET)
-#define IXP425_ICIH     IXP425_INTC_REG(IXP425_ICIH_OFFSET)
-#define IXP425_ICFH     IXP425_INTC_REG(IXP425_ICFH_OFFSET)
-
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP425_GPIO_GPOUTR_OFFSET       0x00
-#define IXP425_GPIO_GPOER_OFFSET        0x04
-#define IXP425_GPIO_GPINR_OFFSET        0x08
-#define IXP425_GPIO_GPISR_OFFSET        0x0C
-#define IXP425_GPIO_GPIT1R_OFFSET	0x10
-#define IXP425_GPIO_GPIT2R_OFFSET	0x14
-#define IXP425_GPIO_GPCLKR_OFFSET	0x18
-#define IXP425_GPIO_GPDBSELR_OFFSET	0x1C
-
-/*
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_PHYS+(x)))
-
-#define IXP425_GPIO_GPOUTR	IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET)
-#define IXP425_GPIO_GPOER       IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET)
-#define IXP425_GPIO_GPINR       IXP425_GPIO_REG(IXP425_GPIO_GPINR_OFFSET)
-#define IXP425_GPIO_GPISR       IXP425_GPIO_REG(IXP425_GPIO_GPISR_OFFSET)
-#define IXP425_GPIO_GPIT1R      IXP425_GPIO_REG(IXP425_GPIO_GPIT1R_OFFSET)
-#define IXP425_GPIO_GPIT2R      IXP425_GPIO_REG(IXP425_GPIO_GPIT2R_OFFSET)
-#define IXP425_GPIO_GPCLKR      IXP425_GPIO_REG(IXP425_GPIO_GPCLKR_OFFSET)
-#define IXP425_GPIO_GPDBSELR    IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET)
-
-#define IXP425_GPIO_GPITR(line)	(((line) >= 8) ? \
-				IXP425_GPIO_GPIT2R : IXP425_GPIO_GPIT1R)
-
-/*
- * Macros to make it easy to access the GPIO registers
- */
-#define GPIO_OUTPUT_ENABLE(line)	*IXP425_GPIO_GPOER &= ~(1 << (line))
-#define GPIO_OUTPUT_DISABLE(line)	*IXP425_GPIO_GPOER |= (1 << (line))
-#define GPIO_OUTPUT_SET(line)		*IXP425_GPIO_GPOUTR |= (1 << (line))
-#define GPIO_OUTPUT_CLEAR(line)		*IXP425_GPIO_GPOUTR &= ~(1 << (line))
-#define GPIO_INT_ACT_LOW_SET(line)				\
-	*IXP425_GPIO_GPITR(line) =				\
-			(*IXP425_GPIO_GPITR(line) &		\
-			~(0x7 << (((line) & 0x7) * 3))) |	\
-			(0x1 << (((line) & 0x7) * 3))		\
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP425_OSTS_OFFSET	0x00  /* Continious TimeStamp */
-#define IXP425_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
-#define IXP425_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
-#define IXP425_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
-#define IXP425_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
-#define IXP425_OSWT_OFFSET	0x14  /* Watchdog Timer */
-#define IXP425_OSWE_OFFSET	0x18  /* Watchdog Enable */
-#define IXP425_OSWK_OFFSET	0x1C  /* Watchdog Key */
-#define IXP425_OSST_OFFSET	0x20  /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#ifndef __ASSEMBLY__
-#define IXP425_TIMER_REG(x) ((volatile u32 *)(IXP425_TIMER_BASE_PHYS+(x)))
-#else
-#define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x))
-#endif
-
-/* _B to avoid collision: also defined in npe/include/... */
-#define IXP425_OSTS_B	IXP425_TIMER_REG(IXP425_OSTS_OFFSET)
-#define IXP425_OST1	IXP425_TIMER_REG(IXP425_OST1_OFFSET)
-#define IXP425_OSRT1	IXP425_TIMER_REG(IXP425_OSRT1_OFFSET)
-#define IXP425_OST2	IXP425_TIMER_REG(IXP425_OST2_OFFSET)
-#define IXP425_OSRT2	IXP425_TIMER_REG(IXP425_OSRT2_OFFSET)
-#define IXP425_OSWT	IXP425_TIMER_REG(IXP425_OSWT_OFFSET)
-#define IXP425_OSWE	IXP425_TIMER_REG(IXP425_OSWE_OFFSET)
-#define IXP425_OSWK	IXP425_TIMER_REG(IXP425_OSWK_OFFSET)
-#define IXP425_OSST	IXP425_TIMER_REG(IXP425_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions
- */
-#define IXP425_OST_ENABLE              BIT(0)
-#define IXP425_OST_ONE_SHOT            BIT(1)
-/* Low order bits of reload value ignored */
-#define IXP425_OST_RELOAD_MASK         (0x3)
-#define IXP425_OST_DISABLED            (0x0)
-#define IXP425_OSST_TIMER_1_PEND       BIT(0)
-#define IXP425_OSST_TIMER_2_PEND       BIT(1)
-#define IXP425_OSST_TIMER_TS_PEND      BIT(2)
-#define IXP425_OSST_TIMER_WDOG_PEND    BIT(3)
-#define IXP425_OSST_TIMER_WARM_RESET   BIT(4)
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET            0x00
-#define PCI_NP_CBE_OFFSET           0x04
-#define PCI_NP_WDATA_OFFSET         0x08
-#define PCI_NP_RDATA_OFFSET         0x0c
-#define PCI_CRP_AD_CBE_OFFSET       0x10
-#define PCI_CRP_WDATA_OFFSET        0x14
-#define PCI_CRP_RDATA_OFFSET        0x18
-#define PCI_CSR_OFFSET              0x1c
-#define PCI_ISR_OFFSET              0x20
-#define PCI_INTEN_OFFSET            0x24
-#define PCI_DMACTRL_OFFSET          0x28
-#define PCI_AHBMEMBASE_OFFSET       0x2c
-#define PCI_AHBIOBASE_OFFSET        0x30
-#define PCI_PCIMEMBASE_OFFSET       0x34
-#define PCI_AHBDOORBELL_OFFSET      0x38
-#define PCI_PCIDOORBELL_OFFSET      0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET  0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_PHYS+(x)))
-
-#define PCI_NP_AD               IXP425_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              IXP425_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            IXP425_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            IXP425_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          IXP425_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           IXP425_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           IXP425_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 IXP425_PCI_CSR(PCI_CSR_OFFSET)
-#define PCI_ISR                 IXP425_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               IXP425_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             IXP425_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          IXP425_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           IXP425_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          IXP425_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         IXP425_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         IXP425_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     IXP425_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     IXP425_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     IXP425_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     IXP425_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     IXP425_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     IXP425_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST		BIT(0)
-#define PCI_CSR_ARBEN		BIT(1)
-#define PCI_CSR_ADS		BIT(2)
-#define PCI_CSR_PDS		BIT(3)
-#define PCI_CSR_ABE		BIT(4)
-#define PCI_CSR_DBT		BIT(5)
-#define PCI_CSR_ASE		BIT(8)
-#define PCI_CSR_IC		BIT(15)
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE		BIT(0)
-#define PCI_ISR_PFE		BIT(1)
-#define PCI_ISR_PPE		BIT(2)
-#define PCI_ISR_AHBE		BIT(3)
-#define PCI_ISR_APDC		BIT(4)
-#define PCI_ISR_PADC		BIT(5)
-#define PCI_ISR_ADB		BIT(6)
-#define PCI_ISR_PDB		BIT(7)
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE		BIT(0)
-#define PCI_INTEN_PFE		BIT(1)
-#define PCI_INTEN_PPE		BIT(2)
-#define PCI_INTEN_AHBE		BIT(3)
-#define PCI_INTEN_APDC		BIT(4)
-#define PCI_INTEN_PADC		BIT(5)
-#define PCI_INTEN_ADB		BIT(6)
-#define PCI_INTEN_PDB		BIT(7)
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP425_PCI_NP_CBE_BESL	4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD		0x2
-#define NP_CMD_IOWRITE		0x3
-#define NP_CMD_CONFIGREAD	0xa
-#define NP_CMD_CONFIGWRITE	0xb
-#define NP_CMD_MEMREAD		0x6
-#define	NP_CMD_MEMWRITE		0x7
-
-#if 0
-#ifndef __ASSEMBLY__
-extern int ixp425_pci_read(u32 addr, u32 cmd, u32* data);
-extern int ixp425_pci_write(u32 addr, u32 cmd, u32 data);
-extern void ixp425_pci_init(void *);
-#endif
-#endif
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL         20
-#define CRP_AD_CBE_WRITE        BIT(16)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP425_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS   */
-
-
-#endif
diff --git a/arch/arm/include/asm/arch-ixp/ixp425pci.h b/arch/arm/include/asm/arch-ixp/ixp425pci.h
deleted file mode 100644
index f499883..0000000
--- a/arch/arm/include/asm/arch-ixp/ixp425pci.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * IXP PCI Init
- * (C) Copyright 2004 eslab.whut.edu.cn
- * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _IXP425PCI_H
-#define _IXP425PCI_H
-
-#define OK	0
-#define ERROR	-1
-
-struct pci_controller;
-extern void pci_ixp_init(struct pci_controller *hose);
-
-/* Mask definitions*/
-#define IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK	0x0000000f
-
-#define PCI_NP_CBE_BESL	 (4)
-#define PCI_NP_AD_FUNCSL (8)
-
-/*Register addressing definitions for PCI controller configuration
-  and status registers*/
-
-#define PCI_CSR_BASE (0xC0000000)
-/*
-#define PCI_NP_AD_OFFSET       (0x00)
-#define PCI_NP_CBE_OFFSET      (0x04)
-#define PCI_NP_WDATA_OFFSET    (0x08)
-#define PCI_NP_RDATA_OFFSET    (0x0C)
-#define PCI_CRP_OFFSET	       (0x10)
-#define PCI_CRP_WDATA_OFFSET   (0x14)
-#define PCI_CRP_RDATA_OFFSET   (0x18)
-#define PCI_CSR_OFFSET	       (0x1C)
-#define PCI_ISR_OFFSET	       (0x20)
-#define PCI_INTEN_OFFSET       (0x24)
-#define PCI_DMACTRL_OFFSET     (0x28)
-#define PCI_AHBMEMBASE_OFFSET  (0x2C)
-#define PCI_AHBIOBASE_OFFSET   (0x30)
-#define PCI_PCIMEMBASE_OFFSET  (0x34)
-#define PCI_AHBDOORBELL_OFFSET (0x38)
-#define PCI_PCIDOORBELL_OFFSET (0x3C)
-#define PCI_ATPDMA0_AHBADDR    (0x40)
-#define PCI_ATPDMA0_PCIADDR    (0x44)
-#define PCI_ATPDMA0_LENADDR    (0x48)
-#define PCI_ATPDMA1_AHBADDR    (0x4C)
-#define PCI_ATPDMA1_PCIADDR    (0x50)
-#define PCI_ATPDMA1_LENADDR    (0x54)
-#define PCI_PTADMA0_AHBADDR    (0x58)
-#define PCI_PTADMA0_PCIADDR    (0x5C)
-#define PCI_PTADMA0_LENADDR    (0x60)
-#define PCI_PTADMA1_AHBADDR    (0x64)
-#define PCI_PTADMA1_PCIADDR    (0x68)
-#define PCI_PTADMA1_LENADDR    (0x6C)
-*/
-/*Non prefetch registers bit definitions*/
-/*
-#define NP_CMD_INTACK	   (0x0)
-#define NP_CMD_SPECIAL	   (0x1)
-#define NP_CMD_IOREAD	   (0x2)
-#define NP_CMD_IOWRITE	   (0x3)
-#define NP_CMD_MEMREAD	   (0x6)
-#define NP_CMD_MEMWRITE	   (0x7)
-#define NP_CMD_CONFIGREAD  (0xa)
-#define NP_CMD_CONFIGWRITE (0xb)
-*/
-
-/*Configuration Port register bit definitions*/
-#define PCI_CRP_WRITE BIT(16)
-
-/*ISR (Interrupt status) Register bit definitions*/
-#define PCI_ISR_PSE   BIT(0)
-#define PCI_ISR_PFE   BIT(1)
-#define PCI_ISR_PPE   BIT(2)
-#define PCI_ISR_AHBE  BIT(3)
-#define PCI_ISR_APDC  BIT(4)
-#define PCI_ISR_PADC  BIT(5)
-#define PCI_ISR_ADB   BIT(6)
-#define PCI_ISR_PDB   BIT(7)
-
-/*INTEN (Interrupt Enable) Register bit definitions*/
-#define PCI_INTEN_PSE	BIT(0)
-#define PCI_INTEN_PFE	BIT(1)
-#define PCI_INTEN_PPE	BIT(2)
-#define PCI_INTEN_AHBE	BIT(3)
-#define PCI_INTEN_APDC	BIT(4)
-#define PCI_INTEN_PADC	BIT(5)
-#define PCI_INTEN_ADB	BIT(6)
-#define PCI_INTEN_PDB	BIT(7)
-
-/*PCI configuration regs.*/
-
-#define PCI_CFG_VENDOR_ID	0x00
-#define PCI_CFG_DEVICE_ID	0x02
-#define PCI_CFG_COMMAND		0x04
-#define PCI_CFG_STATUS		0x06
-#define PCI_CFG_REVISION	0x08
-#define PCI_CFG_PROGRAMMING_IF	0x09
-#define PCI_CFG_SUBCLASS	0x0a
-#define PCI_CFG_CLASS		0x0b
-#define PCI_CFG_CACHE_LINE_SIZE 0x0c
-#define PCI_CFG_LATENCY_TIMER	0x0d
-#define PCI_CFG_HEADER_TYPE	0x0e
-#define PCI_CFG_BIST		0x0f
-#define PCI_CFG_BASE_ADDRESS_0	0x10
-#define PCI_CFG_BASE_ADDRESS_1	0x14
-#define PCI_CFG_BASE_ADDRESS_2	0x18
-#define PCI_CFG_BASE_ADDRESS_3	0x1c
-#define PCI_CFG_BASE_ADDRESS_4	0x20
-#define PCI_CFG_BASE_ADDRESS_5	0x24
-#define PCI_CFG_CIS		0x28
-#define PCI_CFG_SUB_VENDOR_ID	0x2c
-#define PCI_CFG_SUB_SYSTEM_ID	0x2e
-#define PCI_CFG_EXPANSION_ROM	0x30
-#define PCI_CFG_RESERVED_0	0x34
-#define PCI_CFG_RESERVED_1	0x38
-#define PCI_CFG_DEV_INT_LINE	0x3c
-#define PCI_CFG_DEV_INT_PIN	0x3d
-#define PCI_CFG_MIN_GRANT	0x3e
-#define PCI_CFG_MAX_LATENCY	0x3f
-#define PCI_CFG_SPECIAL_USE	0x41
-#define PCI_CFG_MODE		0x43
-
-#define PCI_CMD_IO_ENABLE	0x0001	/* IO access enable */
-#define PCI_CMD_MEM_ENABLE	0x0002	/* memory access enable */
-#define PCI_CMD_MASTER_ENABLE	0x0004	/* bus master enable */
-#define PCI_CMD_MON_ENABLE	0x0008	/* monitor special cycles enable */
-#define PCI_CMD_WI_ENABLE	0x0010	/* write and invalidate enable */
-#define PCI_CMD_SNOOP_ENABLE	0x0020	/* palette snoop enable */
-#define PCI_CMD_PERR_ENABLE	0x0040	/* parity error enable */
-#define PCI_CMD_WC_ENABLE	0x0080	/* wait cycle enable */
-#define PCI_CMD_SERR_ENABLE	0x0100	/* system error enable */
-#define PCI_CMD_FBTB_ENABLE	0x0200	/* fast back to back enable */
-
-
-/*CSR Register bit definitions*/
-#define PCI_CSR_HOST  BIT(0)
-#define PCI_CSR_ARBEN BIT(1)
-#define PCI_CSR_ADS   BIT(2)
-#define PCI_CSR_PDS   BIT(3)
-#define PCI_CSR_ABE   BIT(4)
-#define PCI_CSR_DBT   BIT(5)
-#define PCI_CSR_ASE   BIT(8)
-#define PCI_CSR_IC    BIT(15)
-
-/*Configuration command bit definitions*/
-#define PCI_CFG_CMD_IOAE BIT(0)
-#define PCI_CFG_CMD_MAE	 BIT(1)
-#define PCI_CFG_CMD_BME	 BIT(2)
-#define PCI_CFG_CMD_MWIE BIT(4)
-#define PCI_CFG_CMD_SER	 BIT(8)
-#define PCI_CFG_CMD_FBBE BIT(9)
-#define PCI_CFG_CMD_MDPE BIT(24)
-#define PCI_CFG_CMD_STA	 BIT(27)
-#define PCI_CFG_CMD_RTA	 BIT(28)
-#define PCI_CFG_CMD_RMA	 BIT(29)
-#define PCI_CFG_CMD_SSE	 BIT(30)
-#define PCI_CFG_CMD_DPE	 BIT(31)
-
-/*DMACTRL DMA Control and status Register*/
-#define PCI_DMACTRL_APDCEN  BIT(0)
-#define PCI_DMACTRL_APDC0   BIT(4)
-#define PCI_DMACTRL_APDE0   BIT(5)
-#define PCI_DMACTRL_APDC1   BIT(6)
-#define PCI_DMACTRL_APDE1   BIT(7)
-#define PCI_DMACTRL_PADCEN  BIT(8)
-#define PCI_DMACTRL_PADC0   BIT(12)
-#define PCI_DMACTRL_PADE0   BIT(13)
-#define PCI_DMACTRL_PADC1   BIT(14)
-#define PCI_DMACTRL_PADE1   BIT(15)
-
-#endif
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 4955ccf..054c680 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -230,9 +230,10 @@
 #define MXC_CSPICTRL_CHAN	18
 
 /* Bit position inside CON register to be associated with SS */
-#define MXC_CSPICON_POL		4
-#define MXC_CSPICON_PHA		0
-#define MXC_CSPICON_SSPOL	12
+#define MXC_CSPICON_PHA		0  /* SCLK phase control */
+#define MXC_CSPICON_POL		4  /* SCLK polarity */
+#define MXC_CSPICON_SSPOL	12 /* SS polarity */
+#define MXC_CSPICON_CTL		20 /* inactive state of SCLK */
 #define MXC_SPI_BASE_ADDRESSES \
 	CSPI1_BASE_ADDR, \
 	CSPI2_BASE_ADDR, \
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index c2d210a..1f19727 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -406,10 +406,11 @@ struct cspi_regs {
 #define MXC_CSPICTRL_CHAN	18
 
 /* Bit position inside CON register to be associated with SS */
-#define MXC_CSPICON_POL		4
-#define MXC_CSPICON_PHA		0
-#define MXC_CSPICON_SSPOL	12
-#ifdef CONFIG_MX6SL
+#define MXC_CSPICON_PHA		0  /* SCLK phase control */
+#define MXC_CSPICON_POL		4  /* SCLK polarity */
+#define MXC_CSPICON_SSPOL	12 /* SS polarity */
+#define MXC_CSPICON_CTL		20 /* inactive state of SCLK */
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL)
 #define MXC_SPI_BASE_ADDRESSES \
 	ECSPI1_BASE_ADDR, \
 	ECSPI2_BASE_ADDR, \
diff --git a/arch/arm/include/asm/arch-omap5/sata.h b/arch/arm/include/asm/arch-omap5/sata.h
index 2ca8947..b69165b 100644
--- a/arch/arm/include/asm/arch-omap5/sata.h
+++ b/arch/arm/include/asm/arch-omap5/sata.h
@@ -36,13 +36,4 @@
 #define TI_SATA_IDLE_SMART_WAKE			(0x3 << 2)
 #define TI_SATA_IDLE_SMART			(0x2 << 2)
 
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int omap_sata_init(void);
-#else
-static inline int omap_sata_init(void)
-{
-	return 0;
-}
-#endif /* CONFIG_SCSI_AHCI_PLAT */
-
 #endif /* _TI_SATA_H */
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
index 2d5a62e..4a279cf 100644
--- a/arch/arm/include/asm/arch-omap5/spl.h
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -15,6 +15,7 @@
 #define BOOT_DEVICE_MMC1        5
 #define BOOT_DEVICE_MMC2        6
 #define BOOT_DEVICE_MMC2_2	7
+#define BOOT_DEVICE_SATA	9
 #define BOOT_DEVICE_SPI		10
 #define BOOT_DEVICE_UART	0x43
 
diff --git a/arch/arm/include/asm/arch-s5pc1xx/cpu.h b/arch/arm/include/asm/arch-s5pc1xx/cpu.h
index 4fc5a0c..5ae5c87 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/cpu.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/cpu.h
@@ -51,10 +51,17 @@
 #include <asm/io.h>
 /* CPU detection macros */
 extern unsigned int s5p_cpu_id;
+extern unsigned int s5p_cpu_rev;
+
+static inline int s5p_get_cpu_rev(void)
+{
+	return s5p_cpu_rev;
+}
 
 static inline void s5p_set_cpu_id(void)
 {
 	s5p_cpu_id = readl(S5PC100_PRO_ID);
+	s5p_cpu_rev = s5p_cpu_id & 0x000000FF;
 	s5p_cpu_id = 0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12);
 }
 
diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
index ac60fe6..da8df74 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
@@ -125,20 +125,45 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
 /* GPIO pins per bank  */
 #define GPIO_PER_BANK 8
 
-static inline unsigned int s5p_gpio_base(int nr)
-{
-	return S5PC110_GPIO_BASE;
-}
+#define S5P_GPIO_PART_SHIFT	(24)
+#define S5P_GPIO_PART_MASK	(0xff)
+#define S5P_GPIO_BANK_SHIFT	(8)
+#define S5P_GPIO_BANK_MASK	(0xffff)
+#define S5P_GPIO_PIN_MASK	(0xff)
+
+#define S5P_GPIO_SET_PART(x) \
+			(((x) & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT)
+
+#define S5P_GPIO_GET_PART(x) \
+			(((x) >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK)
+
+#define S5P_GPIO_SET_PIN(x) \
+			((x) & S5P_GPIO_PIN_MASK)
 
-static inline unsigned int s5p_gpio_part_max(int nr)
+#define S5PC100_SET_BANK(bank) \
+			(((unsigned)&(((struct s5pc100_gpio *) \
+			S5PC100_GPIO_BASE)->bank) - S5PC100_GPIO_BASE) \
+			& S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define S5PC110_SET_BANK(bank) \
+			((((unsigned)&(((struct s5pc110_gpio *) \
+			S5PC110_GPIO_BASE)->bank) - S5PC110_GPIO_BASE) \
+			& S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define s5pc100_gpio_get(bank, pin) \
+			(S5P_GPIO_SET_PART(0) | \
+			S5PC100_SET_BANK(bank) | \
+			S5P_GPIO_SET_PIN(pin))
+
+#define s5pc110_gpio_get(bank, pin) \
+			(S5P_GPIO_SET_PART(0) | \
+			S5PC110_SET_BANK(bank) | \
+			S5P_GPIO_SET_PIN(pin))
+
+static inline unsigned int s5p_gpio_base(int nr)
 {
-	return 0;
+	return samsung_get_base_gpio();
 }
-
-#define s5pc110_gpio_get_nr(bank, pin)	  \
-	((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\
-	    - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \
-	  * GPIO_PER_BANK) + pin)
 #endif
 
 /* Pin configurations */
diff --git a/arch/arm/include/asm/arch-spear/hardware.h b/arch/arm/include/asm/arch-spear/hardware.h
index f3afd4d..c6da405 100644
--- a/arch/arm/include/asm/arch-spear/hardware.h
+++ b/arch/arm/include/asm/arch-spear/hardware.h
@@ -26,7 +26,6 @@
 #define CONFIG_SYS_NAND_ALE			(1 << 17)
 
 #if defined(CONFIG_SPEAR600)
-#define CONFIG_SYS_I2C_BASE			0xD0200000
 #define CONFIG_SYS_FSMC_BASE			0xD1800000
 #define CONFIG_FSMC_NAND_BASE			0xD2000000
 
@@ -42,11 +41,9 @@
 #define CONFIG_SPEAR_MPMCREGS			100
 
 #elif defined(CONFIG_SPEAR300)
-#define CONFIG_SYS_I2C_BASE			0xD0180000
 #define CONFIG_SYS_FSMC_BASE			0x94000000
 
 #elif defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_I2C_BASE			0xD0180000
 #define CONFIG_SYS_FSMC_BASE			0x44000000
 
 #undef CONFIG_SYS_NAND_CLE
@@ -63,7 +60,6 @@
 #define CONFIG_SYS_MACB3_BASE			0xB1800000
 
 #elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_I2C_BASE			0xD0180000
 #define CONFIG_SYS_FSMC_BASE			0x4C000000
 
 #define CONFIG_SPEAR_EMIBASE			0x40000000
diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h
index 074b3bc..7d28e16 100644
--- a/arch/arm/include/asm/arch-tegra/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -1,5 +1,5 @@
 /*
- *  (C) Copyright 2010,2011
+ *  (C) Copyright 2010-2014
  *  NVIDIA Corporation <www.nvidia.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -11,7 +11,8 @@
 /* PLL registers - there are several PLLs in the clock controller */
 struct clk_pll {
 	uint pll_base;		/* the control register */
-	uint pll_out[2];	/* output control */
+	/* pll_out[0] is output A control, pll_out[1] is output B control */
+	uint pll_out[2];
 	uint pll_misc;		/* other misc things */
 };
 
@@ -21,6 +22,13 @@ struct clk_pll_simple {
 	uint pll_misc;		/* other misc things */
 };
 
+struct clk_pllm {
+	uint pllm_base;		/* the control register */
+	uint pllm_out;		/* output control */
+	uint pllm_misc1;	/* misc1 */
+	uint pllm_misc2;	/* misc2 */
+};
+
 /* RST_DEV_(L,H,U,V,W)_(SET,CLR) and CLK_ENB_(L,H,U,V,W)_(SET,CLR) */
 struct clk_set_clr {
 	uint set;
@@ -38,7 +46,8 @@ enum {
 	TEGRA_CLK_REGS		= 3,	/* Number of clock enable regs L/H/U */
 	TEGRA_CLK_SOURCES	= 64,	/* Number of ppl clock sources L/H/U */
 	TEGRA_CLK_REGS_VW	= 2,	/* Number of clock enable regs V/W */
-	TEGRA_CLK_SOURCES_VW	= 32,	/* Number of ppl clock sources V/W*/
+	TEGRA_CLK_SOURCES_VW	= 32,	/* Number of ppl clock sources V/W */
+	TEGRA_CLK_SOURCES_X	= 32,	/* Number of ppl clock sources X */
 };
 
 /* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */
@@ -47,7 +56,7 @@ struct clk_rst_ctlr {
 	uint crc_rst_dev[TEGRA_CLK_REGS];	/* _RST_DEVICES_L/H/U_0 */
 	uint crc_clk_out_enb[TEGRA_CLK_REGS];	/* _CLK_OUT_ENB_L/H/U_0 */
 	uint crc_reserved0;		/* reserved_0,		0x1C */
-	uint crc_cclk_brst_pol;		/* _CCLK_BURST_POLICY_0,0x20 */
+	uint crc_cclk_brst_pol;		/* _CCLK_BURST_POLICY_0, 0x20 */
 	uint crc_super_cclk_div;	/* _SUPER_CCLK_DIVIDER_0,0x24 */
 	uint crc_sclk_brst_pol;		/* _SCLK_BURST_POLICY_0, 0x28 */
 	uint crc_super_sclk_div;	/* _SUPER_SCLK_DIVIDER_0,0x2C */
@@ -75,7 +84,21 @@ struct clk_rst_ctlr {
 
 	uint crc_clk_src[TEGRA_CLK_SOURCES]; /*_I2S1_0...	0x100-1fc */
 
-	uint crc_reserved20[64];	/* _reserved_20,	0x200-2fc */
+	uint crc_reserved20[32];	/* _reserved_20,	0x200-27c */
+
+	uint crc_clk_out_enb_x;		/* _CLK_OUT_ENB_X_0,	0x280 */
+	uint crc_clk_enb_x_set;		/* _CLK_ENB_X_SET_0,	0x284 */
+	uint crc_clk_enb_x_clr;		/* _CLK_ENB_X_CLR_0,	0x288 */
+
+	uint crc_rst_devices_x;		/* _RST_DEVICES_X_0,	0x28c */
+	uint crc_rst_dev_x_set;		/* _RST_DEV_X_SET_0,	0x290 */
+	uint crc_rst_dev_x_clr;		/* _RST_DEV_X_CLR_0,	0x294 */
+
+	uint crc_reserved21[23];	/* _reserved_21,	0x298-2f0 */
+
+	uint crc_dfll_base;		/* _DFLL_BASE_0,	0x2f4 */
+
+	uint crc_reserved22[2];		/* _reserved_22,	0x2f8-2fc */
 
 	/* _RST_DEV_L/H/U_SET_0 0x300 ~ 0x314 */
 	struct clk_set_clr crc_rst_dev_ex[TEGRA_CLK_REGS];
@@ -105,10 +128,10 @@ struct clk_rst_ctlr {
 	uint crc_clk_cpug_cmplx;	/* _CLK_CPUG_CMPLX_0,       0x378 */
 	uint crc_clk_cpulp_cmplx;	/* _CLK_CPULP_CMPLX_0,      0x37C */
 	uint crc_cpu_softrst_ctrl;	/* _CPU_SOFTRST_CTRL_0,     0x380 */
-	uint crc_cpu_softrst_ctrl1;	/* _CPU_SOFTRST_CTR1L_0,    0x384 */
+	uint crc_cpu_softrst_ctrl1;	/* _CPU_SOFTRST_CTRL1_0,    0x384 */
 	uint crc_cpu_softrst_ctrl2;	/* _CPU_SOFTRST_CTRL2_0,    0x388 */
 	uint crc_reserved33[9];		/* _reserved_33,        0x38c-3ac */
-	uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW]; /* _G3D2_0..., 0x3b0-0x42c */
+	uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW];	/* 0x3B0-0x42C */
 	/* _RST_DEV_V/W_SET_0 0x430 ~ 0x43c */
 	struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW];
 	/* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */
@@ -142,6 +165,47 @@ struct clk_rst_ctlr {
 	uint crc_audio_sync_clk_i2s3;	/* _AUDIO_SYNC_CLK_I2S3_0, 0x4AC */
 	uint crc_audio_sync_clk_i2s4;	/* _AUDIO_SYNC_CLK_I2S4_0, 0x4B0 */
 	uint crc_audio_sync_clk_spdif;	/* _AUDIO_SYNC_CLK_SPDIF_0, 0x4B4 */
+
+	uint crc_plld2_base;		/* _PLLD2_BASE_0, 0x4B8 */
+	uint crc_plld2_misc;		/* _PLLD2_MISC_0, 0x4BC */
+	uint crc_utmip_pll_cfg3;	/* _UTMIP_PLL_CFG3_0, 0x4C0 */
+	uint crc_pllrefe_base;		/* _PLLREFE_BASE_0, 0x4C4 */
+	uint crc_pllrefe_misc;		/* _PLLREFE_MISC_0, 0x4C8 */
+	uint crs_reserved_50[7];	/* _reserved_50, 0x4CC-0x4E4 */
+	uint crc_pllc2_base;		/* _PLLC2_BASE_0, 0x4E8 */
+	uint crc_pllc2_misc0;		/* _PLLC2_MISC_0_0, 0x4EC */
+	uint crc_pllc2_misc1;		/* _PLLC2_MISC_1_0, 0x4F0 */
+	uint crc_pllc2_misc2;		/* _PLLC2_MISC_2_0, 0x4F4 */
+	uint crc_pllc2_misc3;		/* _PLLC2_MISC_3_0, 0x4F8 */
+	uint crc_pllc3_base;		/* _PLLC3_BASE_0, 0x4FC */
+	uint crc_pllc3_misc0;		/* _PLLC3_MISC_0_0, 0x500 */
+	uint crc_pllc3_misc1;		/* _PLLC3_MISC_1_0, 0x504 */
+	uint crc_pllc3_misc2;		/* _PLLC3_MISC_2_0, 0x508 */
+	uint crc_pllc3_misc3;		/* _PLLC3_MISC_3_0, 0x50C */
+	uint crc_pllx_misc1;		/* _PLLX_MISC_1_0, 0x510 */
+	uint crc_pllx_misc2;		/* _PLLX_MISC_2_0, 0x514 */
+	uint crc_pllx_misc3;		/* _PLLX_MISC_3_0, 0x518 */
+	uint crc_xusbio_pll_cfg0;	/* _XUSBIO_PLL_CFG0_0, 0x51C */
+	uint crc_xusbio_pll_cfg1;	/* _XUSBIO_PLL_CFG0_1, 0x520 */
+	uint crc_plle_aux1;		/* _PLLE_AUX1_0, 0x524 */
+	uint crc_pllp_reshift;		/* _PLLP_RESHIFT_0, 0x528 */
+	uint crc_utmipll_hw_pwrdn_cfg0;	/* _UTMIPLL_HW_PWRDN_CFG0_0, 0x52C */
+	uint crc_pllu_hw_pwrdn_cfg0;	/* _PLLU_HW_PWRDN_CFG0_0, 0x530 */
+	uint crc_xusb_pll_cfg0;		/* _XUSB_PLL_CFG0_0, 0x534 */
+	uint crc_reserved51[1];		/* _reserved_51, 0x538 */
+	uint crc_clk_cpu_misc;		/* _CLK_CPU_MISC_0, 0x53C */
+	uint crc_clk_cpug_misc;		/* _CLK_CPUG_MISC_0, 0x540 */
+	uint crc_clk_cpulp_misc;	/* _CLK_CPULP_MISC_0, 0x544 */
+	uint crc_pllx_hw_ctrl_cfg;	/* _PLLX_HW_CTRL_CFG_0, 0x548 */
+	uint crc_pllx_sw_ramp_cfg;	/* _PLLX_SW_RAMP_CFG_0, 0x54C */
+	uint crc_pllx_hw_ctrl_status;	/* _PLLX_HW_CTRL_STATUS_0, 0x550 */
+	uint crc_reserved52[1];		/* _reserved_52, 0x554 */
+	uint crc_super_gr3d_clk_div;	/* _SUPER_GR3D_CLK_DIVIDER_0, 0x558 */
+	uint crc_spare_reg0;		/* _SPARE_REG0_0, 0x55C */
+
+	/* Tegra124 - skip to 0x600 here for new CLK_SOURCE_ regs */
+	uint crc_reserved60[40];	/* _reserved_60, 0x560 - 0x5FC */
+	uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x678 */
 };
 
 /* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
@@ -160,6 +224,9 @@ struct clk_rst_ctlr {
 
 #define PLL_BASE_OVRRIDE_MASK	(1U << 28)
 
+#define PLL_LOCK_SHIFT		27
+#define PLL_LOCK_MASK		(1U << PLL_LOCK_SHIFT)
+
 #define PLL_DIVP_SHIFT		20
 #define PLL_DIVP_MASK		(7U << PLL_DIVP_SHIFT)
 
@@ -209,6 +276,20 @@ enum {
 	IN_408_OUT_9_6_DIVISOR = 83,
 };
 
+#define PLLP_OUT1_RSTN_DIS	(1 << 0)
+#define PLLP_OUT1_RSTN_EN	(0 << 0)
+#define PLLP_OUT1_CLKEN		(1 << 1)
+#define PLLP_OUT2_RSTN_DIS	(1 << 16)
+#define PLLP_OUT2_RSTN_EN	(0 << 16)
+#define PLLP_OUT2_CLKEN		(1 << 17)
+
+#define PLLP_OUT3_RSTN_DIS	(1 << 0)
+#define PLLP_OUT3_RSTN_EN	(0 << 0)
+#define PLLP_OUT3_CLKEN		(1 << 1)
+#define PLLP_OUT4_RSTN_DIS	(1 << 16)
+#define PLLP_OUT4_RSTN_EN	(0 << 16)
+#define PLLP_OUT4_CLKEN		(1 << 17)
+
 /* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 */
 #define PLLU_POWERDOWN		(1 << 16)
 #define PLL_ENABLE_POWERDOWN	(1 << 14)
@@ -219,9 +300,15 @@ enum {
 #define UTMIP_FORCE_PD_SAMP_B_POWERDOWN		(1 << 2)
 #define UTMIP_FORCE_PD_SAMP_A_POWERDOWN		(1 << 0)
 
-/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
-#define OSC_XOBP_SHIFT		1
-#define OSC_XOBP_MASK		(1U << OSC_XOBP_SHIFT)
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 0x50 */
+#define OSC_XOE_SHIFT			0
+#define OSC_XOE_MASK			(1 << OSC_XOE_SHIFT)
+#define OSC_XOE_ENABLE			(1 << OSC_XOE_SHIFT)
+#define OSC_XOBP_SHIFT			1
+#define OSC_XOBP_MASK			(1U << OSC_XOBP_SHIFT)
+#define OSC_XOFS_SHIFT			4
+#define OSC_XOFS_MASK			(0x3F << OSC_XOFS_SHIFT)
+#define OSC_DRIVE_STRENGTH		7
 
 /*
  * CLK_RST_CONTROLLER_CLK_SOURCE_x_OUT_0 - the mask here is normally 8 bits
@@ -233,11 +320,15 @@ enum {
 #define OUT_CLK_DIVISOR_SHIFT	0
 #define OUT_CLK_DIVISOR_MASK	(0xffff << OUT_CLK_DIVISOR_SHIFT)
 
-#define OUT_CLK_SOURCE_SHIFT	30
-#define OUT_CLK_SOURCE_MASK	(3U << OUT_CLK_SOURCE_SHIFT)
+#define OUT_CLK_SOURCE_31_30_SHIFT	30
+#define OUT_CLK_SOURCE_31_30_MASK	(3U << OUT_CLK_SOURCE_31_30_SHIFT)
+
+#define OUT_CLK_SOURCE_31_29_SHIFT	29
+#define OUT_CLK_SOURCE_31_29_MASK	(7U << OUT_CLK_SOURCE_31_29_SHIFT)
 
-#define OUT_CLK_SOURCE4_SHIFT	28
-#define OUT_CLK_SOURCE4_MASK	(15U << OUT_CLK_SOURCE4_SHIFT)
+/* Note: See comment for MASK_BITS_31_28 in arch-tegra/clock.h */
+#define OUT_CLK_SOURCE_31_28_SHIFT	28
+#define OUT_CLK_SOURCE_31_28_MASK	(15U << OUT_CLK_SOURCE_31_28_SHIFT)
 
 /* CLK_RST_CONTROLLER_SCLK_BURST_POLICY */
 #define SCLK_SYS_STATE_SHIFT    28U
@@ -290,7 +381,7 @@ enum {
 #define SUPER_SCLK_DIVISOR_SHIFT	0
 #define SUPER_SCLK_DIVISOR_MASK		(0xff << SUPER_SCLK_DIVISOR_SHIFT)
 
-/* CLK_RST_CONTROLLER_CLK_SYSTEM_RATE */
+/* CLK_RST_CONTROLLER_CLK_SYSTEM_RATE 0x30 */
 #define CLK_SYS_RATE_HCLK_DISABLE_SHIFT 7
 #define CLK_SYS_RATE_HCLK_DISABLE_MASK  (1 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT)
 #define CLK_SYS_RATE_AHB_RATE_SHIFT     4
@@ -300,23 +391,53 @@ enum {
 #define CLK_SYS_RATE_APB_RATE_SHIFT     0
 #define CLK_SYS_RATE_APB_RATE_MASK      (3 << CLK_SYS_RATE_AHB_RATE_SHIFT)
 
-/* CLK_RST_CONTROLLER_RST_CPUxx_CMPLX_CLR */
-#define CLR_CPURESET0   (1 << 0)
-#define CLR_CPURESET1   (1 << 1)
-#define CLR_CPURESET2   (1 << 2)
-#define CLR_CPURESET3   (1 << 3)
-#define CLR_DBGRESET0   (1 << 12)
-#define CLR_DBGRESET1   (1 << 13)
-#define CLR_DBGRESET2   (1 << 14)
-#define CLR_DBGRESET3   (1 << 15)
-#define CLR_CORERESET0  (1 << 16)
-#define CLR_CORERESET1  (1 << 17)
-#define CLR_CORERESET2  (1 << 18)
-#define CLR_CORERESET3  (1 << 19)
-#define CLR_CXRESET0    (1 << 20)
-#define CLR_CXRESET1    (1 << 21)
-#define CLR_CXRESET2    (1 << 22)
-#define CLR_CXRESET3    (1 << 23)
-#define CLR_NONCPURESET (1 << 29)
+/* CLK_RST_CONTROLLER_RST_CPUxx_CMPLX_CLR 0x344 */
+#define CLR_CPURESET0			(1 << 0)
+#define CLR_CPURESET1			(1 << 1)
+#define CLR_CPURESET2			(1 << 2)
+#define CLR_CPURESET3			(1 << 3)
+#define CLR_DBGRESET0			(1 << 12)
+#define CLR_DBGRESET1			(1 << 13)
+#define CLR_DBGRESET2			(1 << 14)
+#define CLR_DBGRESET3			(1 << 15)
+#define CLR_CORERESET0			(1 << 16)
+#define CLR_CORERESET1			(1 << 17)
+#define CLR_CORERESET2			(1 << 18)
+#define CLR_CORERESET3			(1 << 19)
+#define CLR_CXRESET0			(1 << 20)
+#define CLR_CXRESET1			(1 << 21)
+#define CLR_CXRESET2			(1 << 22)
+#define CLR_CXRESET3			(1 << 23)
+#define CLR_L2RESET			(1 << 24)
+#define CLR_NONCPURESET			(1 << 29)
+#define CLR_PRESETDBG			(1 << 30)
+
+/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR 0x34c */
+#define CLR_CPU0_CLK_STP		(1 << 8)
+#define CLR_CPU1_CLK_STP		(1 << 9)
+#define CLR_CPU2_CLK_STP		(1 << 10)
+#define CLR_CPU3_CLK_STP		(1 << 11)
+
+/* CRC_CLK_SOURCE_MSELECT_0 0x3b4 */
+#define MSELECT_CLK_SRC_PLLP_OUT0	(0 << 29)
+
+/* CRC_CLK_ENB_V_SET_0 0x440 */
+#define SET_CLK_ENB_CPUG_ENABLE		(1 << 0)
+#define SET_CLK_ENB_CPULP_ENABLE	(1 << 1)
+#define SET_CLK_ENB_MSELECT_ENABLE	(1 << 3)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 0x484 */
+#define PLL_ACTIVE_POWERDOWN		(1 << 12)
+#define PLL_ENABLE_POWERDOWN		(1 << 14)
+#define PLLU_POWERDOWN			(1 << 16)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0 0x488 */
+#define UTMIP_FORCE_PD_SAMP_A_POWERDOWN	(1 << 0)
+#define UTMIP_FORCE_PD_SAMP_B_POWERDOWN	(1 << 2)
+#define UTMIP_FORCE_PD_SAMP_C_POWERDOWN	(1 << 4)
+
+/* CLK_RST_CONTROLLER_PLLX_MISC_3 */
+#define PLLX_IDDQ_SHIFT			3
+#define PLLX_IDDQ_MASK			(1U << PLLX_IDDQ_SHIFT)
 
 #endif	/* _TEGRA_CLK_RST_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index e7d0fd4..9d8114c 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -20,6 +20,21 @@ enum clock_osc_freq {
 	CLOCK_OSC_FREQ_COUNT,
 };
 
+/*
+ * Note that no Tegra clock register actually uses all of bits 31:28 as
+ * the mux field. Rather, bits 30:28, 29:28, or 28 are used. However, in
+ * those cases, nothing is stored in the bits about the mux field, so it's
+ * safe to pretend that the mux field extends all the way to the end of the
+ * register. As such, the U-Boot clock driver is currently a bit lazy, and
+ * doesn't distinguish between 31:28, 30:28, 29:28 and 28; it just lumps
+ * them all together and pretends they're all 31:28.
+ */
+enum {
+	MASK_BITS_31_30,
+	MASK_BITS_31_29,
+	MASK_BITS_31_28,
+};
+
 #include <asm/arch/clock-tables.h>
 /* PLL stabilization delay in usec */
 #define CLOCK_PLL_STABLE_DELAY_US 300
@@ -305,4 +320,6 @@ int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon);
 /* SoC-specific TSC init */
 void arch_timer_init(void);
 
+void tegra30_set_up_pllp(void);
+
 #endif  /* _TEGRA_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
index c840c08..7a86acb 100644
--- a/arch/arm/include/asm/arch-tegra/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
@@ -20,5 +20,6 @@
 #define CHIPID_TEGRA20			0x20
 #define CHIPID_TEGRA30			0x30
 #define CHIPID_TEGRA114			0x35
+#define CHIPID_TEGRA124			0x40
 
 #endif	/* _TEGRA_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/pmc.h b/arch/arm/include/asm/arch-tegra/pmc.h
index ba22236..4c3264b 100644
--- a/arch/arm/include/asm/arch-tegra/pmc.h
+++ b/arch/arm/include/asm/arch-tegra/pmc.h
@@ -1,5 +1,5 @@
 /*
- *  (C) Copyright 2010,2011
+ *  (C) Copyright 2010,2011,2014
  *  NVIDIA Corporation <www.nvidia.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -21,7 +21,11 @@ struct pmc_ctlr {
 	uint pmc_dpd_sample;		/* _DPD_PADS_SAMPLE_0, offset 20 */
 	uint pmc_dpd_enable;		/* _DPD_PADS_ENABLE_0, offset 24 */
 	uint pmc_pwrgate_timer_off;	/* _PWRGATE_TIMER_OFF_0, offset 28 */
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30)
 	uint pmc_pwrgate_timer_on;	/* _PWRGATE_TIMER_ON_0, offset 2C */
+#else
+	uint pmc_clamp_status;		/* _CLAMP_STATUS_0, offset 2C */
+#endif
 	uint pmc_pwrgate_toggle;	/* _PWRGATE_TOGGLE_0, offset 30 */
 	uint pmc_remove_clamping;	/* _REMOVE_CLAMPING_CMD_0, offset 34 */
 	uint pmc_pwrgate_status;	/* _PWRGATE_STATUS_0, offset 38 */
@@ -103,6 +107,179 @@ struct pmc_ctlr {
 	uint pmc_sys_33v_en;		/* _SYS_33V_EN_0, offset 154 */
 	uint pmc_bo_mirror_access;	/* _BOUNDOUT_MIRROR_ACCESS_0, off158 */
 	uint pmc_gate;			/* _GATE_0, offset 15C */
+	/* The following fields are in Tegra124 and later only */
+	uint pmc_wake2_mask;		/* _WAKE2_MASK_0, offset 160 */
+	uint pmc_wake2_lvl;		/* _WAKE2_LVL_0,  offset 164 */
+	uint pmc_wake2_stat;		/* _WAKE2_STATUS_0, offset 168 */
+	uint pmc_sw_wake2_stat;		/* _SW_WAKE2_STATUS_0, offset 16C */
+	uint pmc_auto_wake2_lvl_mask;	/* _AUTO_WAKE2_LVL_MASK_0, offset 170 */
+	uint pmc_pg_mask2;		/* _PG_MASK_2_0, offset 174 */
+	uint pmc_pg_mask_ce1;		/* _PG_MASK_CE1_0, offset 178 */
+	uint pmc_pg_mask_ce2;		/* _PG_MASK_CE2_0, offset 17C */
+	uint pmc_pg_mask_ce3;		/* _PG_MASK_CE3_0, offset 180 */
+	uint pmc_pwrgate_timer_ce0;	/* _PWRGATE_TIMER_CE_0_0, offset 184 */
+	uint pmc_pwrgate_timer_ce1;	/* _PWRGATE_TIMER_CE_1_0, offset 188 */
+	uint pmc_pwrgate_timer_ce2;	/* _PWRGATE_TIMER_CE_2_0, offset 18C */
+	uint pmc_pwrgate_timer_ce3;	/* _PWRGATE_TIMER_CE_3_0, offset 190 */
+	uint pmc_pwrgate_timer_ce4;	/* _PWRGATE_TIMER_CE_4_0, offset 194 */
+	uint pmc_pwrgate_timer_ce5;	/* _PWRGATE_TIMER_CE_5_0, offset 198 */
+	uint pmc_pwrgate_timer_ce6;	/* _PWRGATE_TIMER_CE_6_0, offset 19C */
+	uint pmc_pcx_edpd_cntrl;	/* _PCX_EDPD_CNTRL_0, offset 1A0 */
+	uint pmc_osc_edpd_over;		/* _OSC_EDPD_OVER_0, offset 1A4 */
+	uint pmc_clk_out_cntrl;		/* _CLK_OUT_CNTRL_0, offset 1A8 */
+	uint pmc_sata_pwrgate;		/* _SATA_PWRGT_0, offset 1AC */
+	uint pmc_sensor_ctrl;		/* _SENSOR_CTRL_0, offset 1B0 */
+	uint pmc_reset_status;		/* _RTS_STATUS_0, offset 1B4 */
+	uint pmc_io_dpd_req;		/* _IO_DPD_REQ_0, offset 1B8 */
+	uint pmc_io_dpd_stat;		/* _IO_DPD_STATUS_0, offset 1BC */
+	uint pmc_io_dpd2_req;		/* _IO_DPD2_REQ_0, offset 1C0 */
+	uint pmc_io_dpd2_stat;		/* _IO_DPD2_STATUS_0, offset 1C4 */
+	uint pmc_sel_dpd_tim;		/* _SEL_DPD_TIM_0, offset 1C8 */
+	uint pmc_vddp_sel;		/* _VDDP_SEL_0, offset 1CC */
+
+	uint pmc_ddr_cfg;		/* _DDR_CFG_0, offset 1D0 */
+	uint pmc_e_no_vttgen;		/* _E_NO_VTTGEN_0, offset 1D4 */
+	uint pmc_reserved0;		/* _RESERVED, offset 1D8 */
+	uint pmc_pllm_wb0_ovrride_frq;	/* _PLLM_WB0_OVERRIDE_FREQ_0, off 1DC */
+	uint pmc_test_pwrgate;		/* _TEST_PWRGATE_0, offset 1E0 */
+	uint pmc_pwrgate_timer_mult;	/* _PWRGATE_TIMER_MULT_0, offset 1E4 */
+	uint pmc_dsi_sel_dpd;		/* _DSI_SEL_DPD_0, offset 1E8 */
+	uint pmc_utmip_uhsic_triggers;	/* _UTMIP_UHSIC_TRIGGERS_0, off 1EC */
+	uint pmc_utmip_uhsic_saved_st;  /* _UTMIP_UHSIC_SAVED_STATE_0, off1F0 */
+	uint pmc_utmip_pad_cfg;		/* _UTMIP_PAD_CFG_0, offset 1F4 */
+	uint pmc_utmip_term_pad_cfg;	/* _UTMIP_TERM_PAD_CFG_0, offset 1F8 */
+	uint pmc_utmip_uhsic_sleep_cfg;	/* _UTMIP_UHSIC_SLEEP_CFG_0, off 1FC */
+
+	uint pmc_todo_0[9];		/* offset 200-220 */
+	uint pmc_secure_scratch6;	/* _SECURE_SCRATCH6_0, offset 224 */
+	uint pmc_secure_scratch7;	/* _SECURE_SCRATCH7_0, offset 228 */
+	uint pmc_scratch43;		/* _SCRATCH43_0, offset 22C */
+	uint pmc_scratch44;		/* _SCRATCH44_0, offset 230 */
+	uint pmc_scratch45;
+	uint pmc_scratch46;
+	uint pmc_scratch47;
+	uint pmc_scratch48;
+	uint pmc_scratch49;
+	uint pmc_scratch50;
+	uint pmc_scratch51;
+	uint pmc_scratch52;
+	uint pmc_scratch53;
+	uint pmc_scratch54;
+	uint pmc_scratch55;		/* _SCRATCH55_0, offset 25C */
+	uint pmc_scratch0_eco;		/* _SCRATCH0_ECO_0, offset 260 */
+	uint pmc_por_dpd_ctrl;		/* _POR_DPD_CTRL_0, offset 264 */
+	uint pmc_scratch2_eco;		/* _SCRATCH2_ECO_0, offset 268 */
+	uint pmc_todo_1[17];		/* TODO: 26C ~ 2AC */
+	uint pmc_pllm_wb0_override2;	/* _PLLM_WB0_OVERRIDE2, offset 2B0 */
+	uint pmc_tsc_mult;		/* _TSC_MULT_0, offset 2B4 */
+	uint pmc_cpu_vsense_override;	/* _CPU_VSENSE_OVERRIDE_0, offset 2B8 */
+	uint pmc_glb_amap_cfg;		/* _GLB_AMAP_CFG_0, offset 2BC */
+	uint pmc_sticky_bits;		/* _STICKY_BITS_0, offset 2C0 */
+	uint pmc_sec_disable2;		/* _SEC_DISALBE2, offset 2C4 */
+	uint pmc_weak_bias;		/* _WEAK_BIAS_0, offset 2C8 */
+	uint pmc_todo_3[13];		/* TODO: 2CC ~ 2FC */
+	uint pmc_secure_scratch8;	/* _SECURE_SCRATCH8_0, offset 300 */
+	uint pmc_secure_scratch9;
+	uint pmc_secure_scratch10;
+	uint pmc_secure_scratch11;
+	uint pmc_secure_scratch12;
+	uint pmc_secure_scratch13;
+	uint pmc_secure_scratch14;
+	uint pmc_secure_scratch15;
+	uint pmc_secure_scratch16;
+	uint pmc_secure_scratch17;
+	uint pmc_secure_scratch18;
+	uint pmc_secure_scratch19;
+	uint pmc_secure_scratch20;
+	uint pmc_secure_scratch21;
+	uint pmc_secure_scratch22;
+	uint pmc_secure_scratch23;
+	uint pmc_secure_scratch24;	/* _SECURE_SCRATCH24_0, offset 340 */
+	uint pmc_secure_scratch25;
+	uint pmc_secure_scratch26;
+	uint pmc_secure_scratch27;
+	uint pmc_secure_scratch28;
+	uint pmc_secure_scratch29;
+	uint pmc_secure_scratch30;
+	uint pmc_secure_scratch31;
+	uint pmc_secure_scratch32;
+	uint pmc_secure_scratch33;
+	uint pmc_secure_scratch34;
+	uint pmc_secure_scratch35;	/* _SECURE_SCRATCH35_0, offset 36C */
+
+	uint pmc_reserved1[52];		/* RESERVED: 370 ~ 43C */
+	uint pmc_cntrl2;		/* _CNTRL2_0, offset 440 */
+	uint pmc_reserved2[6];		/* RESERVED: 444 ~ 458 */
+	uint pmc_io_dpd3_req;		/* _IO_DPD3_REQ_0, offset 45c */
+	uint pmc_io_dpd3_stat;		/* _IO_DPD3_STATUS_0, offset 460 */
+	uint pmc_strap_opt_a;		/* _STRAPPING_OPT_A_0, offset 464 */
+	uint pmc_reserved3[102];	/* RESERVED: 468 ~ 5FC */
+
+	uint pmc_scratch56;		/* _SCRATCH56_0, offset 600 */
+	uint pmc_scratch57;
+	uint pmc_scratch58;
+	uint pmc_scratch59;
+	uint pmc_scratch60;
+	uint pmc_scratch61;
+	uint pmc_scratch62;
+	uint pmc_scratch63;
+	uint pmc_scratch64;
+	uint pmc_scratch65;
+	uint pmc_scratch66;
+	uint pmc_scratch67;
+	uint pmc_scratch68;
+	uint pmc_scratch69;
+	uint pmc_scratch70;
+	uint pmc_scratch71;
+	uint pmc_scratch72;
+	uint pmc_scratch73;
+	uint pmc_scratch74;
+	uint pmc_scratch75;
+	uint pmc_scratch76;
+	uint pmc_scratch77;
+	uint pmc_scratch78;
+	uint pmc_scratch79;
+	uint pmc_scratch80;
+	uint pmc_scratch81;
+	uint pmc_scratch82;
+	uint pmc_scratch83;
+	uint pmc_scratch84;
+	uint pmc_scratch85;
+	uint pmc_scratch86;
+	uint pmc_scratch87;
+	uint pmc_scratch88;
+	uint pmc_scratch89;
+	uint pmc_scratch90;
+	uint pmc_scratch91;
+	uint pmc_scratch92;
+	uint pmc_scratch93;
+	uint pmc_scratch94;
+	uint pmc_scratch95;
+	uint pmc_scratch96;
+	uint pmc_scratch97;
+	uint pmc_scratch98;
+	uint pmc_scratch99;
+	uint pmc_scratch100;
+	uint pmc_scratch101;
+	uint pmc_scratch102;
+	uint pmc_scratch103;
+	uint pmc_scratch104;
+	uint pmc_scratch105;
+	uint pmc_scratch106;
+	uint pmc_scratch107;
+	uint pmc_scratch108;
+	uint pmc_scratch109;
+	uint pmc_scratch110;
+	uint pmc_scratch111;
+	uint pmc_scratch112;
+	uint pmc_scratch113;
+	uint pmc_scratch114;
+	uint pmc_scratch115;
+	uint pmc_scratch116;
+	uint pmc_scratch117;
+	uint pmc_scratch118;
+	uint pmc_scratch119;
+	uint pmc_scratch1_eco;	/* offset 700 */
 };
 
 #define CPU_PWRED	1
@@ -114,11 +291,90 @@ struct pmc_ctlr {
 #define CPUPWRREQ_OE	(1 << 16)
 #define CPUPWRREQ_POL	(1 << 15)
 
-#define CRAILID		(0)
-#define CE0ID		(14)
-#define C0NCID		(15)
-#define CRAIL		(1 << CRAILID)
-#define CE0		(1 << CE0ID)
-#define C0NC		(1 << C0NCID)
+#define CRAIL		0
+#define CE0		14
+#define C0NC		15
+
+#define PMC_XOFS_SHIFT	1
+#define PMC_XOFS_MASK	(0x3F << PMC_XOFS_SHIFT)
+
+#define TIMER_MULT_SHIFT	0
+#define TIMER_MULT_MASK		(3 << TIMER_MULT_SHIFT)
+#define TIMER_MULT_CPU_SHIFT	2
+#define TIMER_MULT_CPU_MASK	(3 << TIMER_MULT_CPU_SHIFT)
+#define MULT_1			0
+#define MULT_2			1
+#define MULT_4			2
+#define MULT_8			3
+
+#define AMAP_WRITE_SHIFT	20
+#define AMAP_WRITE_ON		(1 << AMAP_WRITE_SHIFT)
+
+/* SEC_DISABLE_0, 0x04 */
+#define SEC_DISABLE_WRITE0_ON			(1 << 4)
+#define SEC_DISABLE_READ0_ON			(1 << 5)
+#define SEC_DISABLE_WRITE1_ON			(1 << 6)
+#define SEC_DISABLE_READ1_ON			(1 << 7)
+#define SEC_DISABLE_WRITE2_ON			(1 << 8)
+#define SEC_DISABLE_READ2_ON			(1 << 9)
+#define SEC_DISABLE_WRITE3_ON			(1 << 10)
+#define SEC_DISABLE_READ3_ON			(1 << 11)
+#define SEC_DISABLE_AMAP_WRITE_ON		(1 << 20)
+
+/* APBDEV_PMC_PWRGATE_TOGGLE_0 0x30 */
+#define PWRGATE_TOGGLE_PARTID_CRAIL		0
+#define PWRGATE_TOGGLE_PARTID_TD		1
+#define PWRGATE_TOGGLE_PARTID_VE		2
+#define PWRGATE_TOGGLE_PARTID_PCX		3
+#define PWRGATE_TOGGLE_PARTID_VDE		4
+#define PWRGATE_TOGGLE_PARTID_L2C		5
+#define PWRGATE_TOGGLE_PARTID_MPE		6
+#define PWRGATE_TOGGLE_PARTID_HEG		7
+#define PWRGATE_TOGGLE_PARTID_SAX		8
+#define PWRGATE_TOGGLE_PARTID_CE1		9
+#define PWRGATE_TOGGLE_PARTID_CE2		10
+#define PWRGATE_TOGGLE_PARTID_CE3		11
+#define PWRGATE_TOGGLE_PARTID_CELP		12
+#define PWRGATE_TOGGLE_PARTID_CE0		14
+#define PWRGATE_TOGGLE_PARTID_C0NC		15
+#define PWRGATE_TOGGLE_PARTID_C1NC		16
+#define PWRGATE_TOGGLE_PARTID_SOR		17
+#define PWRGATE_TOGGLE_PARTID_DIS		18
+#define PWRGATE_TOGGLE_PARTID_DISB		19
+#define PWRGATE_TOGGLE_PARTID_XUSBA		20
+#define PWRGATE_TOGGLE_PARTID_XUSBB		21
+#define PWRGATE_TOGGLE_PARTID_XUSBC		22
+#define PWRGATE_TOGGLE_PARTID_VIC		23
+#define PWRGATE_TOGGLE_PARTID_IRAM		24
+#define PWRGATE_TOGGLE_START			(1 << 8)
+
+/* APBDEV_PMC_PWRGATE_STATUS_0 0x38 */
+#define PWRGATE_STATUS_CRAIL_ENABLE		(1 << 0)
+#define PWRGATE_STATUS_TD_ENABLE		(1 << 1)
+#define PWRGATE_STATUS_VE_ENABLE		(1 << 2)
+#define PWRGATE_STATUS_PCX_ENABLE		(1 << 3)
+#define PWRGATE_STATUS_VDE_ENABLE		(1 << 4)
+#define PWRGATE_STATUS_L2C_ENABLE		(1 << 5)
+#define PWRGATE_STATUS_MPE_ENABLE		(1 << 6)
+#define PWRGATE_STATUS_HEG_ENABLE		(1 << 7)
+#define PWRGATE_STATUS_SAX_ENABLE		(1 << 8)
+#define PWRGATE_STATUS_CE1_ENABLE		(1 << 9)
+#define PWRGATE_STATUS_CE2_ENABLE		(1 << 10)
+#define PWRGATE_STATUS_CE3_ENABLE		(1 << 11)
+#define PWRGATE_STATUS_CELP_ENABLE		(1 << 12)
+#define PWRGATE_STATUS_CE0_ENABLE		(1 << 14)
+#define PWRGATE_STATUS_C0NC_ENABLE		(1 << 15)
+#define PWRGATE_STATUS_C1NC_ENABLE		(1 << 16)
+#define PWRGATE_STATUS_SOR_ENABLE		(1 << 17)
+#define PWRGATE_STATUS_DIS_ENABLE		(1 << 18)
+#define PWRGATE_STATUS_DISB_ENABLE		(1 << 19)
+#define PWRGATE_STATUS_XUSBA_ENABLE		(1 << 20)
+#define PWRGATE_STATUS_XUSBB_ENABLE		(1 << 21)
+#define PWRGATE_STATUS_XUSBC_ENABLE		(1 << 22)
+#define PWRGATE_STATUS_VIC_ENABLE		(1 << 23)
+#define PWRGATE_STATUS_IRAM_ENABLE		(1 << 24)
+
+/* APBDEV_PMC_CNTRL2_0 0x440 */
+#define HOLD_CKE_LOW_EN				(1 << 12)
 
 #endif	/* PMC_H */
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h
index e99f681..5fe19ae 100644
--- a/arch/arm/include/asm/arch-tegra/tegra.h
+++ b/arch/arm/include/asm/arch-tegra/tegra.h
@@ -68,6 +68,7 @@ enum {
 	SKU_ID_TM30MQS_P_A3	= 0xb1,
 	SKU_ID_T114_ENG		= 0x00, /* Dalmore value, unfused */
 	SKU_ID_T114_1		= 0x01,
+	SKU_ID_T124_ENG		= 0x00, /* Venice2 value, unfused */
 };
 
 /*
@@ -81,6 +82,7 @@ enum {
 	TEGRA_SOC_T25,
 	TEGRA_SOC_T30,
 	TEGRA_SOC_T114,
+	TEGRA_SOC_T124,
 
 	TEGRA_SOC_CNT,
 	TEGRA_SOC_UNKNOWN	= -1,
diff --git a/arch/arm/include/asm/arch-tegra124/ahb.h b/arch/arm/include/asm/arch-tegra124/ahb.h
new file mode 100644
index 0000000..4e48c43
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/ahb.h
@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_AHB_H_
+#define _TEGRA124_AHB_H_
+
+struct ahb_ctlr {
+	u32 reserved0;			/* 00h */
+	u32 arbitration_disable;	/* _ARBITRATION_DISABLE_0,	04h */
+	u32 arbitration_priority_ctrl;	/* _ARBITRATION_PRIORITY_CTRL_0,08h */
+	u32 arbitration_usr_protect;	/* _ARBITRATION_USR_PROTECT_0,	0ch */
+	u32 gizmo_ahb_mem;		/* _GIZMO_AHB_MEM_0,		10h */
+	u32 gizmo_apb_dma;		/* _GIZMO_APB_DMA_0,		14h */
+	u32 reserved6[2];		/* 18h, 1ch */
+	u32 gizmo_usb;			/* _GIZMO_USB_0,		20h */
+	u32 gizmo_ahb_xbar_bridge;	/* _GIZMO_AHB_XBAR_BRIDGE_0,	24h */
+	u32 gizmo_cpu_ahb_bridge;	/* _GIZMO_CPU_AHB_BRIDGE_0,	28h */
+	u32 gizmo_cop_ahb_bridge;	/* _GIZMO_COP_AHB_BRIDGE_0,	2ch */
+	u32 gizmo_xbar_apb_ctlr;	/* _GIZMO_XBAR_APB_CTLR_0,	30h */
+	u32 gizmo_vcp_ahb_bridge;	/* _GIZMO_VCP_AHB_BRIDGE_0,	34h */
+	u32 reserved13[2];		/* 38h, 3ch */
+	u32 gizmo_nand;			/* _GIZMO_NAND_0,		40h */
+	u32 reserved15;			/* 44h */
+	u32 gizmo_sdmmc4;		/* _GIZMO_SDMMC4_0,		48h */
+	u32 reserved17;			/* 4ch */
+	u32 gizmo_se;			/* _GIZMO_SE_0,			50h */
+	u32 gizmo_tzram;		/* _GIZMO_TZRAM_0,		54h */
+	u32 reserved20[3];		/* 58h, 5ch, 60h */
+	u32 gizmo_bsev;			/* _GIZMO_BSEV_0,		64h */
+	u32 reserved22[3];		/* 68h, 6ch, 70h */
+	u32 gizmo_bsea;			/* _GIZMO_BSEA_0,		74h */
+	u32 gizmo_nor;			/* _GIZMO_NOR_0,		78h */
+	u32 gizmo_usb2;			/* _GIZMO_USB2_0,		7ch */
+	u32 gizmo_usb3;			/* _GIZMO_USB3_0,		80h */
+	u32 gizmo_sdmmc1;		/* _GIZMO_SDMMC1_0,		84h */
+	u32 gizmo_sdmmc2;		/* _GIZMO_SDMMC2_0,		88h */
+	u32 gizmo_sdmmc3;		/* _GIZMO_SDMMC3_0,		8ch */
+	u32 reserved30[13];		/* 90h ~ c0h */
+	u32 ahb_wrq_empty;		/* _AHB_WRQ_EMPTY_0,		c4h */
+	u32 reserved32[5];		/* c8h ~ d8h */
+	u32 ahb_mem_prefetch_cfg_x;	/* _AHB_MEM_PREFETCH_CFG_X_0,	dch */
+	u32 arbitration_xbar_ctrl;	/* _ARBITRATION_XBAR_CTRL_0,	e0h */
+	u32 ahb_mem_prefetch_cfg3;	/* _AHB_MEM_PREFETCH_CFG3_0,	e4h */
+	u32 ahb_mem_prefetch_cfg4;	/* _AHB_MEM_PREFETCH_CFG3_0,	e8h */
+	u32 avp_ppcs_rd_coh_status;	/* _AVP_PPCS_RD_COH_STATUS_0,	ech */
+	u32 ahb_mem_prefetch_cfg1;	/* _AHB_MEM_PREFETCH_CFG1_0,	f0h */
+	u32 ahb_mem_prefetch_cfg2;	/* _AHB_MEM_PREFETCH_CFG2_0,	f4h */
+	u32 ahbslvmem_status;		/* _AHBSLVMEM_STATUS_0, f8h */
+	/* _ARBITRATION_AHB_MEM_WRQUE_MST_ID_0, fch */
+	u32 arbitration_ahb_mem_wrque_mst_id;
+	u32 arbitration_cpu_abort_addr;	/* _ARBITRATION_CPU_ABORT_ADDR_0,100h */
+	u32 arbitration_cpu_abort_info;	/* _ARBITRATION_CPU_ABORT_INFO_0,104h */
+	u32 arbitration_cop_abort_addr;	/* _ARBITRATION_COP_ABORT_ADDR_0,108h */
+	u32 arbitration_cop_abort_info;	/* _ARBITRATION_COP_ABORT_INFO_0,10ch */
+	u32 reserved46[4];		/* 110h ~ 11ch */
+	u32 avpc_mccif_fifoctrl;	/* _AVPC_MCCIF_FIFOCTRL_0,	120h */
+	u32 timeout_wcoal_avpc;		/* _TIMEOUT_WCOAL_AVPC_0,	124h */
+	u32 mpcorelp_mccif_fifoctrl;	/* _MPCORELP_MCCIF_FIFOCTRL_0,	128h */
+	u32 mpcore_mccif_fifoctrl;	/* _MPCORE_MCCIF_FIFOCTRL_0,	12ch */
+	u32 axicif_fastsync_ctrl;	/* AXICIF_FASTSYNC_CTRL_0,	130h */
+	u32 axicif_fastsync_statistics;	/* _AXICIF_FASTSYNC_STATISTICS_0,134h */
+	/* _AXICIF_FASTSYNC0_CPUCLK_TO_MCCLK_0,	138h */
+	u32 axicif_fastsync0_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC1_CPUCLK_TO_MCCLK_0, 13ch */
+	u32 axicif_fastsync1_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC2_CPUCLK_TO_MCCLK_0, 140h */
+	u32 axicif_fastsync2_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC0_MCCLK_TO_CPUCLK_0, 144h */
+	u32 axicif_fastsync0_mcclk_to_cpuclk;
+	/* _AXICIF_FASTSYNC1_MCCLK_TO_CPUCLK_0, 148h */
+	u32 axicif_fastsync1_mcclk_to_cpuclk;
+	/* _AXICIF_FASTSYNC2_MCCLK_TO_CPUCLK_0, 14ch */
+	u32 axicif_fastsync2_mcclk_to_cpuclk;
+};
+
+#define PPSB_STOPCLK_ENABLE	(1 << 2)
+
+#define GIZ_ENABLE_SPLIT	(1 << 0)
+#define GIZ_ENB_FAST_REARB	(1 << 2)
+#define GIZ_DONT_SPLIT_AHB_WR	(1 << 7)
+
+#define GIZ_USB_IMMEDIATE	(1 << 18)
+
+/* AHB_ARBITRATION_XBAR_CTRL_0 0xe0 */
+#define ARBITRATION_XBAR_CTRL_PPSB_ENABLE	(1 << 2)
+
+#endif	/* _TEGRA124_AHB_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/clock-tables.h b/arch/arm/include/asm/arch-tegra124/clock-tables.h
new file mode 100644
index 0000000..daf9a2b
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/clock-tables.h
@@ -0,0 +1,496 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/* Tegra124 clock PLL tables */
+
+#ifndef _TEGRA124_CLOCK_TABLES_H_
+#define _TEGRA124_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+
+	/* These are the base clocks (inputs to the Tegra SoC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+
+	CLOCK_ID_COUNT,	/* number of PLLs */
+
+	/*
+	 * These are clock IDs that are used in table clock_source[][]
+	 * but will not be assigned as a clock source for any peripheral.
+	 */
+	CLOCK_ID_DISPLAY2,
+	CLOCK_ID_CGENERAL2,
+	CLOCK_ID_CGENERAL3,
+	CLOCK_ID_MEMORY2,
+	CLOCK_ID_SRC2,
+
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 (DEVICES_L) */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_COP,
+	PERIPH_ID_TRIGSYS,
+	PERIPH_ID_ISPB,
+	PERIPH_ID_RESERVED4,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_RESERVED13,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_TCW,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_RESERVED19,
+	PERIPH_ID_VI,
+	PERIPH_ID_RESERVED21,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_RESERVED24,
+	PERIPH_ID_RESERVED25,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_I2S0,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 (DEVICES_H) */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_RESERVED36,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_RESERVED38,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_RESERVED43,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_XIO,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_I2C5,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_RESERVED49,
+	PERIPH_ID_HSI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_RESERVED53,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_MIPI_CAL,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_RESERVED60,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 (DEVICES_U) */
+	PERIPH_ID_RESERVED64,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_PCIEXCLK,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_LA,
+	PERIPH_ID_TRACECLKIN,
+	PERIPH_ID_SOC_THERM,
+	PERIPH_ID_DTV,
+
+	/* 80 */
+	PERIPH_ID_RESERVED80,
+	PERIPH_ID_I2CSLOW,
+	PERIPH_ID_DSIB,
+	PERIPH_ID_TSEC,
+	PERIPH_ID_RESERVED84,
+	PERIPH_ID_RESERVED85,
+	PERIPH_ID_RESERVED86,
+	PERIPH_ID_EMUCIF,
+
+	/* 88 */
+	PERIPH_ID_RESERVED88,
+	PERIPH_ID_XUSB_HOST,
+	PERIPH_ID_RESERVED90,
+	PERIPH_ID_MSENC,
+	PERIPH_ID_RESERVED92,
+	PERIPH_ID_RESERVED93,
+	PERIPH_ID_RESERVED94,
+	PERIPH_ID_XUSB_DEV,
+
+	PERIPH_ID_VW_FIRST,
+	/* V word: 31:0 */
+	PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+	PERIPH_ID_CPULP,
+	PERIPH_ID_V_RESERVED2,
+	PERIPH_ID_MSELECT,
+	PERIPH_ID_V_RESERVED4,
+	PERIPH_ID_I2S3,
+	PERIPH_ID_I2S4,
+	PERIPH_ID_I2C4,
+
+	/* 104 */
+	PERIPH_ID_SBC5,
+	PERIPH_ID_SBC6,
+	PERIPH_ID_AUDIO,
+	PERIPH_ID_APBIF,
+	PERIPH_ID_DAM0,
+	PERIPH_ID_DAM1,
+	PERIPH_ID_DAM2,
+	PERIPH_ID_HDA2CODEC2X,
+
+	/* 112 */
+	PERIPH_ID_ATOMICS,
+	PERIPH_ID_V_RESERVED17,
+	PERIPH_ID_V_RESERVED18,
+	PERIPH_ID_V_RESERVED19,
+	PERIPH_ID_V_RESERVED20,
+	PERIPH_ID_V_RESERVED21,
+	PERIPH_ID_V_RESERVED22,
+	PERIPH_ID_ACTMON,
+
+	/* 120 */
+	PERIPH_ID_EXTPERIPH1,
+	PERIPH_ID_EXTPERIPH2,
+	PERIPH_ID_EXTPERIPH3,
+	PERIPH_ID_OOB,
+	PERIPH_ID_SATA,
+	PERIPH_ID_HDA,
+	PERIPH_ID_V_RESERVED30,
+	PERIPH_ID_V_RESERVED31,
+
+	/* W word: 31:0 */
+	PERIPH_ID_HDA2HDMICODEC,
+	PERIPH_ID_SATACOLD,
+	PERIPH_ID_W_RESERVED2,
+	PERIPH_ID_W_RESERVED3,
+	PERIPH_ID_W_RESERVED4,
+	PERIPH_ID_W_RESERVED5,
+	PERIPH_ID_W_RESERVED6,
+	PERIPH_ID_W_RESERVED7,
+
+	/* 136 */
+	PERIPH_ID_CEC,
+	PERIPH_ID_W_RESERVED9,
+	PERIPH_ID_W_RESERVED10,
+	PERIPH_ID_W_RESERVED11,
+	PERIPH_ID_W_RESERVED12,
+	PERIPH_ID_W_RESERVED13,
+	PERIPH_ID_XUSB_PADCTL,
+	PERIPH_ID_W_RESERVED15,
+
+	/* 144 */
+	PERIPH_ID_W_RESERVED16,
+	PERIPH_ID_W_RESERVED17,
+	PERIPH_ID_W_RESERVED18,
+	PERIPH_ID_W_RESERVED19,
+	PERIPH_ID_W_RESERVED20,
+	PERIPH_ID_ENTROPY,
+	PERIPH_ID_DDS,
+	PERIPH_ID_W_RESERVED23,
+
+	/* 152 */
+	PERIPH_ID_DP2,
+	PERIPH_ID_AMX0,
+	PERIPH_ID_ADX0,
+	PERIPH_ID_DVFS,
+	PERIPH_ID_XUSB_SS,
+	PERIPH_ID_W_RESERVED29,
+	PERIPH_ID_W_RESERVED30,
+	PERIPH_ID_W_RESERVED31,
+
+	PERIPH_ID_X_FIRST,
+	/* X word: 31:0 */
+	PERIPH_ID_SPARE = PERIPH_ID_X_FIRST,
+	PERIPH_ID_X_RESERVED1,
+	PERIPH_ID_X_RESERVED2,
+	PERIPH_ID_X_RESERVED3,
+	PERIPH_ID_CAM_MCLK,
+	PERIPH_ID_CAM_MCLK2,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_X_RESERVED7,
+
+	/* 168 */
+	PERIPH_ID_X_RESERVED8,
+	PERIPH_ID_X_RESERVED9,
+	PERIPH_ID_X_RESERVED10,
+	PERIPH_ID_VIM2_CLK,
+	PERIPH_ID_X_RESERVED12,
+	PERIPH_ID_X_RESERVED13,
+	PERIPH_ID_EMC_DLL,
+	PERIPH_ID_X_RESERVED15,
+
+	/* 176 */
+	PERIPH_ID_HDMI_AUDIO,
+	PERIPH_ID_CLK72MHZ,
+	PERIPH_ID_VIC,
+	PERIPH_ID_X_RESERVED19,
+	PERIPH_ID_ADX1,
+	PERIPH_ID_DPAUX,
+	PERIPH_ID_SOR0,
+	PERIPH_ID_X_RESERVED23,
+
+	/* 184 */
+	PERIPH_ID_GPU,
+	PERIPH_ID_AMX1,
+	PERIPH_ID_X_RESERVED26,
+	PERIPH_ID_X_RESERVED27,
+	PERIPH_ID_X_RESERVED28,
+	PERIPH_ID_X_RESERVED29,
+	PERIPH_ID_X_RESERVED30,
+	PERIPH_ID_X_RESERVED31,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+	PLL_OUT1,
+	PLL_OUT2,
+	PLL_OUT3,
+	PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+	/* 0x00 */
+	PERIPHC_I2S1,
+	PERIPHC_I2S2,
+	PERIPHC_SPDIF_OUT,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_PWM,
+	PERIPHC_05h,
+	PERIPHC_SBC2,
+	PERIPHC_SBC3,
+
+	/* 0x08 */
+	PERIPHC_08h,
+	PERIPHC_I2C1,
+	PERIPHC_I2C5,
+	PERIPHC_0bh,
+	PERIPHC_0ch,
+	PERIPHC_SBC1,
+	PERIPHC_DISP1,
+	PERIPHC_DISP2,
+
+	/* 0x10 */
+	PERIPHC_10h,
+	PERIPHC_11h,
+	PERIPHC_VI,
+	PERIPHC_13h,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC2,
+	PERIPHC_G3D,
+	PERIPHC_G2D,
+
+	/* 0x18 */
+	PERIPHC_18h,
+	PERIPHC_SDMMC4,
+	PERIPHC_VFIR,
+	PERIPHC_1Bh,
+	PERIPHC_1Ch,
+	PERIPHC_HSI,
+	PERIPHC_UART1,
+	PERIPHC_UART2,
+
+	/* 0x20 */
+	PERIPHC_HOST1X,
+	PERIPHC_21h,
+	PERIPHC_22h,
+	PERIPHC_HDMI,
+	PERIPHC_24h,
+	PERIPHC_25h,
+	PERIPHC_I2C2,
+	PERIPHC_EMC,
+
+	/* 0x28 */
+	PERIPHC_UART3,
+	PERIPHC_29h,
+	PERIPHC_VI_SENSOR,
+	PERIPHC_2bh,
+	PERIPHC_2ch,
+	PERIPHC_SBC4,
+	PERIPHC_I2C3,
+	PERIPHC_SDMMC3,
+
+	/* 0x30 */
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_VDE,
+	PERIPHC_OWR,
+	PERIPHC_NOR,
+	PERIPHC_CSITE,
+	PERIPHC_I2S0,
+	PERIPHC_DTV,
+
+	/* 0x38 */
+	PERIPHC_38h,
+	PERIPHC_39h,
+	PERIPHC_3ah,
+	PERIPHC_3bh,
+	PERIPHC_MSENC,
+	PERIPHC_TSEC,
+	PERIPHC_3eh,
+	PERIPHC_OSC,
+
+	PERIPHC_VW_FIRST,
+	/* 0x40 */
+	PERIPHC_40h = PERIPHC_VW_FIRST,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+
+	/* 0x48 */
+	PERIPHC_AUDIO,
+	PERIPHC_49h,
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+	PERIPHC_ACTMON,
+	PERIPHC_EXTPERIPH1,
+
+	/* 0x50 */
+	PERIPHC_EXTPERIPH2,
+	PERIPHC_EXTPERIPH3,
+	PERIPHC_52h,
+	PERIPHC_I2CSLOW,
+	PERIPHC_SYS,
+	PERIPHC_55h,
+	PERIPHC_56h,
+	PERIPHC_57h,
+
+	/* 0x58 */
+	PERIPHC_58h,
+	PERIPHC_59h,
+	PERIPHC_5ah,
+	PERIPHC_5bh,
+	PERIPHC_SATAOOB,
+	PERIPHC_SATA,
+	PERIPHC_HDA,		/* 0x428 */
+	PERIPHC_5fh,
+
+	PERIPHC_X_FIRST,
+	/* 0x60 */
+	PERIPHC_XUSB_CORE_HOST = PERIPHC_X_FIRST,	/* 0x600 */
+	PERIPHC_XUSB_FALCON,
+	PERIPHC_XUSB_FS,
+	PERIPHC_XUSB_CORE_DEV,
+	PERIPHC_XUSB_SS,
+	PERIPHC_CILAB,
+	PERIPHC_CILCD,
+	PERIPHC_CILE,
+
+	/* 0x68 */
+	PERIPHC_DSIA_LP,
+	PERIPHC_DSIB_LP,
+	PERIPHC_ENTROPY,
+	PERIPHC_DVFS_REF,
+	PERIPHC_DVFS_SOC,
+	PERIPHC_TRACECLKIN,
+	PERIPHC_ADX0,
+	PERIPHC_AMX0,
+
+	/* 0x70 */
+	PERIPHC_EMC_LATENCY,
+	PERIPHC_SOC_THERM,
+	PERIPHC_72h,
+	PERIPHC_73h,
+	PERIPHC_74h,
+	PERIPHC_75h,
+	PERIPHC_VI_SENSOR2,
+	PERIPHC_I2C6,
+
+	/* 0x78 */
+	PERIPHC_78h,
+	PERIPHC_EMC_DLL,
+	PERIPHC_HDMI_AUDIO,
+	PERIPHC_CLK72MHZ,
+	PERIPHC_ADX1,
+	PERIPHC_AMX1,
+	PERIPHC_VIC,
+	PERIPHC_7fh,
+
+	PERIPHC_COUNT,
+
+	PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+	(id < PERIPH_ID_VW_FIRST) ? \
+		((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+		(id) < PERIPH_ID_COUNT)
+
+#endif	/* _TEGRA124_CLOCK_TABLES_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/clock.h b/arch/arm/include/asm/arch-tegra124/clock.h
new file mode 100644
index 0000000..8e39d21
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/clock.h
@@ -0,0 +1,19 @@
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/* Tegra124 clock control definitions */
+
+#ifndef _TEGRA124_CLOCK_H_
+#define _TEGRA124_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT          28
+#define OSC_FREQ_MASK           (0xF << OSC_FREQ_SHIFT)
+
+#endif	/* _TEGRA124_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/flow.h b/arch/arm/include/asm/arch-tegra124/flow.h
new file mode 100644
index 0000000..0db1881
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/flow.h
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_FLOW_H_
+#define _TEGRA124_FLOW_H_
+
+struct flow_ctlr {
+	u32 halt_cpu_events;	/* offset 0x00 */
+	u32 halt_cop_events;	/* offset 0x04 */
+	u32 cpu_csr;		/* offset 0x08 */
+	u32 cop_csr;		/* offset 0x0c */
+	u32 xrq_events;		/* offset 0x10 */
+	u32 halt_cpu1_events;	/* offset 0x14 */
+	u32 cpu1_csr;		/* offset 0x18 */
+	u32 halt_cpu2_events;	/* offset 0x1c */
+	u32 cpu2_csr;		/* offset 0x20 */
+	u32 halt_cpu3_events;	/* offset 0x24 */
+	u32 cpu3_csr;		/* offset 0x28 */
+	u32 cluster_control;	/* offset 0x2c */
+	u32 halt_cop1_events;	/* offset 0x30 */
+	u32 halt_cop1_csr;	/* offset 0x34 */
+	u32 cpu_pwr_csr;	/* offset 0x38 */
+	u32 mpid;		/* offset 0x3c */
+	u32 ram_repair;		/* offset 0x40 */
+};
+
+/* HALT_COP_EVENTS_0, 0x04 */
+#define EVENT_MSEC		(1 << 24)
+#define EVENT_USEC		(1 << 25)
+#define EVENT_JTAG		(1 << 28)
+#define EVENT_MODE_STOP		(2 << 29)
+
+/* FLOW_CTLR_CLUSTER_CONTROL_0 0x2c */
+#define ACTIVE_LP		(1 << 0)
+
+#endif	/*  _TEGRA124_FLOW_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/funcmux.h b/arch/arm/include/asm/arch-tegra124/funcmux.h
new file mode 100644
index 0000000..df94d13
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/funcmux.h
@@ -0,0 +1,23 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/* Tegra124 high-level function multiplexing */
+
+#ifndef _TEGRA124_FUNCMUX_H_
+#define _TEGRA124_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+	FUNCMUX_DEFAULT = 0,	/* default config */
+
+	/* UART configs */
+	FUNCMUX_UART1_KBC = 0,
+	FUNCMUX_UART4_GPIO = 0,
+};
+#endif	/* _TEGRA124_FUNCMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/gp_padctrl.h b/arch/arm/include/asm/arch-tegra124/gp_padctrl.h
new file mode 100644
index 0000000..440cbbf
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/gp_padctrl.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_GP_PADCTRL_H_
+#define _TEGRA124_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+	u32	modereg;	/* 0x00: APB_MISC_GP_MODEREG */
+	u32	hidrev;		/* 0x04: APB_MISC_GP_HIDREV */
+	u32	reserved0[22];	/* 0x08 - 0x5C: */
+	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
+	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+	u32	aocfg2;		/* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+	u32	atcfg3;		/* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+	u32	atcfg4;		/* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+	u32	atcfg5;		/* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+	u32	cdev1cfg;	/* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+	u32	cdev2cfg;	/* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+	u32	reserved1;	/* 0x8C: */
+	u32	dap1cfg;	/* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+	u32	dap2cfg;	/* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+	u32	dap3cfg;	/* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+	u32	dap4cfg;	/* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+	u32	dbgcfg;		/* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+	u32	reserved2[3];	/* 0xA4 - 0xAC: */
+	u32	sdio3cfg;	/* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+	u32	spicfg;		/* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+	u32	uaacfg;		/* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+	u32	uabcfg;		/* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+	u32	uart2cfg;	/* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+	u32	uart3cfg;	/* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+	u32	reserved3[9];	/* 0xC8-0xE8: */
+	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+	u32	reserved4[3];	/* 0xF0-0xF8: */
+	u32	ddccfg;		/* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */
+	u32	gmacfg;		/* 0x100: APB_MISC_GP_GMACFGPADCTRL */
+	u32	reserved5[3];	/* 0x104-0x10C: */
+	u32	gmecfg;		/* 0x110: APB_MISC_GP_GMECFGPADCTRL */
+	u32	gmfcfg;		/* 0x114: APB_MISC_GP_GMFCFGPADCTRL */
+	u32	gmgcfg;		/* 0x118: APB_MISC_GP_GMGCFGPADCTRL */
+	u32	gmhcfg;		/* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */
+	u32	owrcfg;		/* 0x120: APB_MISC_GP_OWRCFGPADCTRL */
+	u32	uadcfg;		/* 0x124: APB_MISC_GP_UADCFGPADCTRL */
+	u32	reserved6;	/* 0x128: */
+	u32	dev3cfg;	/* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */
+	u32	reserved7[2];	/* 0x130 - 0x134: */
+	u32	ceccfg;		/* 0x138: APB_MISC_GP_CECCFGPADCTRL */
+	u32	reserved8[22];	/* 0x13C - 0x190: */
+	u32	atcfg6;		/* 0x194: APB_MISC_GP_ATCFG6PADCTRL */
+	u32	dap5cfg;	/* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */
+	u32	vbuscfg;	/* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */
+	u32	aocfg3;		/* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */
+	u32	hvccfg0;	/* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */
+	u32	sdio4cfg;	/* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */
+	u32	aocfg0;		/* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
+};
+
+/* SDMMC1/3 settings from section 27.5 of T114 TRM */
+#define SDIOCFG_DRVUP_SLWF	0
+#define SDIOCFG_DRVDN_SLWR	0
+#define SDIOCFG_DRVUP		0x24
+#define SDIOCFG_DRVDN		0x14
+
+#endif	/* _TEGRA124_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/gpio.h b/arch/arm/include/asm/arch-tegra124/gpio.h
new file mode 100644
index 0000000..1a6dcb8
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/gpio.h
@@ -0,0 +1,303 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_GPIO_H_
+#define _TEGRA124_GPIO_H_
+
+/*
+ * The Tegra124 GPIO controller has 256 GPIOS in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS	4	/* number of ports per bank */
+#define TEGRA_GPIO_BANKS	8	/* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+	uint gpio_config[TEGRA_GPIO_PORTS];
+	uint gpio_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_out[TEGRA_GPIO_PORTS];
+	uint gpio_in[TEGRA_GPIO_PORTS];
+	uint gpio_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_int_clear[TEGRA_GPIO_PORTS];
+	uint gpio_masked_config[TEGRA_GPIO_PORTS];
+	uint gpio_masked_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_in[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+	struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+enum gpio_pin {
+	GPIO_PA0 = 0,	/* pin 0 */
+	GPIO_PA1,
+	GPIO_PA2,
+	GPIO_PA3,
+	GPIO_PA4,
+	GPIO_PA5,
+	GPIO_PA6,
+	GPIO_PA7,
+	GPIO_PB0,	/* pin 8 */
+	GPIO_PB1,
+	GPIO_PB2,
+	GPIO_PB3,
+	GPIO_PB4,
+	GPIO_PB5,
+	GPIO_PB6,
+	GPIO_PB7,
+	GPIO_PC0,	/* pin 16 */
+	GPIO_PC1,
+	GPIO_PC2,
+	GPIO_PC3,
+	GPIO_PC4,
+	GPIO_PC5,
+	GPIO_PC6,
+	GPIO_PC7,
+	GPIO_PD0,	/* pin 24 */
+	GPIO_PD1,
+	GPIO_PD2,
+	GPIO_PD3,
+	GPIO_PD4,
+	GPIO_PD5,
+	GPIO_PD6,
+	GPIO_PD7,
+	GPIO_PE0,	/* pin 32 */
+	GPIO_PE1,
+	GPIO_PE2,
+	GPIO_PE3,
+	GPIO_PE4,
+	GPIO_PE5,
+	GPIO_PE6,
+	GPIO_PE7,
+	GPIO_PF0,	/* pin 40 */
+	GPIO_PF1,
+	GPIO_PF2,
+	GPIO_PF3,
+	GPIO_PF4,
+	GPIO_PF5,
+	GPIO_PF6,
+	GPIO_PF7,
+	GPIO_PG0,	/* pin 48 */
+	GPIO_PG1,
+	GPIO_PG2,
+	GPIO_PG3,
+	GPIO_PG4,
+	GPIO_PG5,
+	GPIO_PG6,
+	GPIO_PG7,
+	GPIO_PH0,	/* pin 56 */
+	GPIO_PH1,
+	GPIO_PH2,
+	GPIO_PH3,
+	GPIO_PH4,
+	GPIO_PH5,
+	GPIO_PH6,
+	GPIO_PH7,
+	GPIO_PI0,	/* pin 64 */
+	GPIO_PI1,
+	GPIO_PI2,
+	GPIO_PI3,
+	GPIO_PI4,
+	GPIO_PI5,
+	GPIO_PI6,
+	GPIO_PI7,
+	GPIO_PJ0,	/* pin 72 */
+	GPIO_PJ1,
+	GPIO_PJ2,
+	GPIO_PJ3,
+	GPIO_PJ4,
+	GPIO_PJ5,
+	GPIO_PJ6,
+	GPIO_PJ7,
+	GPIO_PK0,	/* pin 80 */
+	GPIO_PK1,
+	GPIO_PK2,
+	GPIO_PK3,
+	GPIO_PK4,
+	GPIO_PK5,
+	GPIO_PK6,
+	GPIO_PK7,
+	GPIO_PL0,	/* pin 88 */
+	GPIO_PL1,
+	GPIO_PL2,
+	GPIO_PL3,
+	GPIO_PL4,
+	GPIO_PL5,
+	GPIO_PL6,
+	GPIO_PL7,
+	GPIO_PM0,	/* pin 96 */
+	GPIO_PM1,
+	GPIO_PM2,
+	GPIO_PM3,
+	GPIO_PM4,
+	GPIO_PM5,
+	GPIO_PM6,
+	GPIO_PM7,
+	GPIO_PN0,	/* pin 104 */
+	GPIO_PN1,
+	GPIO_PN2,
+	GPIO_PN3,
+	GPIO_PN4,
+	GPIO_PN5,
+	GPIO_PN6,
+	GPIO_PN7,
+	GPIO_PO0,	/* pin 112 */
+	GPIO_PO1,
+	GPIO_PO2,
+	GPIO_PO3,
+	GPIO_PO4,
+	GPIO_PO5,
+	GPIO_PO6,
+	GPIO_PO7,
+	GPIO_PP0,	/* pin 120 */
+	GPIO_PP1,
+	GPIO_PP2,
+	GPIO_PP3,
+	GPIO_PP4,
+	GPIO_PP5,
+	GPIO_PP6,
+	GPIO_PP7,
+	GPIO_PQ0,	/* pin 128 */
+	GPIO_PQ1,
+	GPIO_PQ2,
+	GPIO_PQ3,
+	GPIO_PQ4,
+	GPIO_PQ5,
+	GPIO_PQ6,
+	GPIO_PQ7,
+	GPIO_PR0,	/* pin 136 */
+	GPIO_PR1,
+	GPIO_PR2,
+	GPIO_PR3,
+	GPIO_PR4,
+	GPIO_PR5,
+	GPIO_PR6,
+	GPIO_PR7,
+	GPIO_PS0,	/* pin 144 */
+	GPIO_PS1,
+	GPIO_PS2,
+	GPIO_PS3,
+	GPIO_PS4,
+	GPIO_PS5,
+	GPIO_PS6,
+	GPIO_PS7,
+	GPIO_PT0,	/* pin 152 */
+	GPIO_PT1,
+	GPIO_PT2,
+	GPIO_PT3,
+	GPIO_PT4,
+	GPIO_PT5,
+	GPIO_PT6,
+	GPIO_PT7,
+	GPIO_PU0,	/* pin 160 */
+	GPIO_PU1,
+	GPIO_PU2,
+	GPIO_PU3,
+	GPIO_PU4,
+	GPIO_PU5,
+	GPIO_PU6,
+	GPIO_PU7,
+	GPIO_PV0,	/* pin 168 */
+	GPIO_PV1,
+	GPIO_PV2,
+	GPIO_PV3,
+	GPIO_PV4,
+	GPIO_PV5,
+	GPIO_PV6,
+	GPIO_PV7,
+	GPIO_PW0,	/* pin 176 */
+	GPIO_PW1,
+	GPIO_PW2,
+	GPIO_PW3,
+	GPIO_PW4,
+	GPIO_PW5,
+	GPIO_PW6,
+	GPIO_PW7,
+	GPIO_PX0,	/* pin 184 */
+	GPIO_PX1,
+	GPIO_PX2,
+	GPIO_PX3,
+	GPIO_PX4,
+	GPIO_PX5,
+	GPIO_PX6,
+	GPIO_PX7,
+	GPIO_PY0,	/* pin 192 */
+	GPIO_PY1,
+	GPIO_PY2,
+	GPIO_PY3,
+	GPIO_PY4,
+	GPIO_PY5,
+	GPIO_PY6,
+	GPIO_PY7,
+	GPIO_PZ0,	/* pin 200 */
+	GPIO_PZ1,
+	GPIO_PZ2,
+	GPIO_PZ3,
+	GPIO_PZ4,
+	GPIO_PZ5,
+	GPIO_PZ6,
+	GPIO_PZ7,
+	GPIO_PAA0,	/* pin 208 */
+	GPIO_PAA1,
+	GPIO_PAA2,
+	GPIO_PAA3,
+	GPIO_PAA4,
+	GPIO_PAA5,
+	GPIO_PAA6,
+	GPIO_PAA7,
+	GPIO_PBB0,	/* pin 216 */
+	GPIO_PBB1,
+	GPIO_PBB2,
+	GPIO_PBB3,
+	GPIO_PBB4,
+	GPIO_PBB5,
+	GPIO_PBB6,
+	GPIO_PBB7,
+	GPIO_PCC0,	/* pin 224 */
+	GPIO_PCC1,
+	GPIO_PCC2,
+	GPIO_PCC3,
+	GPIO_PCC4,
+	GPIO_PCC5,
+	GPIO_PCC6,
+	GPIO_PCC7,
+	GPIO_PDD0,	/* pin 232 */
+	GPIO_PDD1,
+	GPIO_PDD2,
+	GPIO_PDD3,
+	GPIO_PDD4,
+	GPIO_PDD5,
+	GPIO_PDD6,
+	GPIO_PDD7,
+	GPIO_PEE0,	/* pin 240 */
+	GPIO_PEE1,
+	GPIO_PEE2,
+	GPIO_PEE3,
+	GPIO_PEE4,
+	GPIO_PEE5,
+	GPIO_PEE6,
+	GPIO_PEE7,
+	GPIO_PFF0,	/* pin 248 */
+	GPIO_PFF1,
+	GPIO_PFF2,
+	GPIO_PFF3,
+	GPIO_PFF4,
+	GPIO_PFF5,
+	GPIO_PFF6,
+	GPIO_PFF7,	/* pin 255 */
+};
+
+#endif	/* _TEGRA124_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/hardware.h b/arch/arm/include/asm/arch-tegra124/hardware.h
new file mode 100644
index 0000000..114fce8
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/hardware.h
@@ -0,0 +1,16 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_HARDWARE_H_
+#define _TEGRA124_HARDWARE_H_
+
+/*
+ * Include Tegra-specific hardware definitions
+ * Nothing needed currently for Tegra124
+ */
+
+#endif /* _TEGRA124_HARDWARE_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/pinmux.h b/arch/arm/include/asm/arch-tegra124/pinmux.h
new file mode 100644
index 0000000..9662e2b
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/pinmux.h
@@ -0,0 +1,620 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_PINMUX_H_
+#define _TEGRA124_PINMUX_H_
+
+/*
+ * Pin groups which we adjust. There are three basic attributes of each pin
+ * group which use this enum:
+ *
+ *	- function
+ *	- pullup / pulldown
+ *	- tristate or normal
+ */
+enum pmux_pingrp {
+	PINGRP_ULPI_DATA0 = 0,  /* offset 0x3000 */
+	PINGRP_ULPI_DATA1,
+	PINGRP_ULPI_DATA2,
+	PINGRP_ULPI_DATA3,
+	PINGRP_ULPI_DATA4,
+	PINGRP_ULPI_DATA5,
+	PINGRP_ULPI_DATA6,
+	PINGRP_ULPI_DATA7,
+	PINGRP_ULPI_CLK,
+	PINGRP_ULPI_DIR,
+	PINGRP_ULPI_NXT,
+	PINGRP_ULPI_STP,
+	PINGRP_DAP3_FS,
+	PINGRP_DAP3_DIN,
+	PINGRP_DAP3_DOUT,
+	PINGRP_DAP3_SCLK,
+	PINGRP_GPIO_PV0,
+	PINGRP_GPIO_PV1,
+	PINGRP_SDMMC1_CLK,
+	PINGRP_SDMMC1_CMD,
+	PINGRP_SDMMC1_DAT3,
+	PINGRP_SDMMC1_DAT2,
+	PINGRP_SDMMC1_DAT1,
+	PINGRP_SDMMC1_DAT0,
+	PINGRP_CLK2_OUT = PINGRP_SDMMC1_DAT0 + 3,
+	PINGRP_CLK2_REQ,
+	PINGRP_HDMI_INT = PINGRP_CLK2_REQ + 41,
+	PINGRP_DDC_SCL,
+	PINGRP_DDC_SDA,
+	PINGRP_UART2_RXD = PINGRP_DDC_SDA + 19,
+	PINGRP_UART2_TXD,
+	PINGRP_UART2_RTS_N,
+	PINGRP_UART2_CTS_N,
+	PINGRP_UART3_TXD,
+	PINGRP_UART3_RXD,
+	PINGRP_UART3_CTS_N,
+	PINGRP_UART3_RTS_N,
+	PINGRP_GPIO_PU0,
+	PINGRP_GPIO_PU1,
+	PINGRP_GPIO_PU2,
+	PINGRP_GPIO_PU3,
+	PINGRP_GPIO_PU4,
+	PINGRP_GPIO_PU5,
+	PINGRP_GPIO_PU6,
+	PINGRP_GEN1_I2C_SDA,
+	PINGRP_GEN1_I2C_SCL,
+	PINGRP_DAP4_FS,
+	PINGRP_DAP4_DIN,
+	PINGRP_DAP4_DOUT,
+	PINGRP_DAP4_SCLK,
+	PINGRP_CLK3_OUT,
+	PINGRP_CLK3_REQ,
+	/* Renamed on Tegra124, from GMI_xx to GPIO_Pxx */
+	PINGRP_GPIO_PC7,			/* offset 0x31c0 */
+	PINGRP_GPIO_PI5,
+	PINGRP_GPIO_PI7,
+	PINGRP_GPIO_PK0,
+	PINGRP_GPIO_PK1,
+	PINGRP_GPIO_PJ0,
+	PINGRP_GPIO_PJ2,
+	PINGRP_GPIO_PK3,
+	PINGRP_GPIO_PK4,
+	PINGRP_GPIO_PK2,
+	PINGRP_GPIO_PI3,
+	PINGRP_GPIO_PI6,
+	PINGRP_GPIO_PG0,
+	PINGRP_GPIO_PG1,
+	PINGRP_GPIO_PG2,
+	PINGRP_GPIO_PG3,
+	PINGRP_GPIO_PG4,
+	PINGRP_GPIO_PG5,
+	PINGRP_GPIO_PG6,
+	PINGRP_GPIO_PG7,
+	PINGRP_GPIO_PH0,
+	PINGRP_GPIO_PH1,
+	PINGRP_GPIO_PH2,
+	PINGRP_GPIO_PH3,
+	PINGRP_GPIO_PH4,
+	PINGRP_GPIO_PH5,
+	PINGRP_GPIO_PH6,
+	PINGRP_GPIO_PH7,
+	PINGRP_GPIO_PJ7,
+	PINGRP_GPIO_PB0,
+	PINGRP_GPIO_PB1,
+	PINGRP_GPIO_PK7,
+	PINGRP_GPIO_PI0,
+	PINGRP_GPIO_PI1,
+	PINGRP_GPIO_PI2,
+	PINGRP_GPIO_PI4,			/* offset 0x324c */
+	PINGRP_GEN2_I2C_SCL,
+	PINGRP_GEN2_I2C_SDA,
+	PINGRP_SDMMC4_CLK,
+	PINGRP_SDMMC4_CMD,
+	PINGRP_SDMMC4_DAT0,
+	PINGRP_SDMMC4_DAT1,
+	PINGRP_SDMMC4_DAT2,
+	PINGRP_SDMMC4_DAT3,
+	PINGRP_SDMMC4_DAT4,
+	PINGRP_SDMMC4_DAT5,
+	PINGRP_SDMMC4_DAT6,
+	PINGRP_SDMMC4_DAT7,
+	PINGRP_CAM_MCLK = PINGRP_SDMMC4_DAT7 + 2,
+	PINGRP_GPIO_PCC1,
+	PINGRP_GPIO_PBB0,
+	PINGRP_CAM_I2C_SCL,
+	PINGRP_CAM_I2C_SDA,
+	PINGRP_GPIO_PBB3,
+	PINGRP_GPIO_PBB4,
+	PINGRP_GPIO_PBB5,
+	PINGRP_GPIO_PBB6,
+	PINGRP_GPIO_PBB7,
+	PINGRP_GPIO_PCC2,
+	PINGRP_JTAG_RTCK,
+	PINGRP_PWR_I2C_SCL,
+	PINGRP_PWR_I2C_SDA,
+	PINGRP_KB_ROW0,
+	PINGRP_KB_ROW1,
+	PINGRP_KB_ROW2,
+	PINGRP_KB_ROW3,
+	PINGRP_KB_ROW4,
+	PINGRP_KB_ROW5,
+	PINGRP_KB_ROW6,
+	PINGRP_KB_ROW7,
+	PINGRP_KB_ROW8,
+	PINGRP_KB_ROW9,
+	PINGRP_KB_ROW10,
+	PINGRP_KB_ROW11,
+	PINGRP_KB_ROW12,
+	PINGRP_KB_ROW13,
+	PINGRP_KB_ROW14,
+	PINGRP_KB_ROW15,
+	PINGRP_KB_COL0,				/* offset 0x32fc */
+	PINGRP_KB_COL1,
+	PINGRP_KB_COL2,
+	PINGRP_KB_COL3,
+	PINGRP_KB_COL4,
+	PINGRP_KB_COL5,
+	PINGRP_KB_COL6,
+	PINGRP_KB_COL7,
+	PINGRP_CLK_32K_OUT,
+	PINGRP_CORE_PWR_REQ = PINGRP_CLK_32K_OUT + 2,	/* offset 0x3324 */
+	PINGRP_CPU_PWR_REQ,
+	PINGRP_PWR_INT_N,
+	PINGRP_CLK_32K_IN,
+	PINGRP_OWR,
+	PINGRP_DAP1_FS,
+	PINGRP_DAP1_DIN,
+	PINGRP_DAP1_DOUT,
+	PINGRP_DAP1_SCLK,
+	PINGRP_CLK1_REQ,
+	PINGRP_CLK1_OUT,
+	PINGRP_SPDIF_IN,
+	PINGRP_SPDIF_OUT,
+	PINGRP_DAP2_FS,
+	PINGRP_DAP2_DIN,
+	PINGRP_DAP2_DOUT,
+	PINGRP_DAP2_SCLK,
+	PINGRP_DVFS_PWM,
+	PINGRP_GPIO_X1_AUD,
+	PINGRP_GPIO_X3_AUD,
+	PINGRP_DVFS_CLK,
+	PINGRP_GPIO_X4_AUD,
+	PINGRP_GPIO_X5_AUD,
+	PINGRP_GPIO_X6_AUD,
+	PINGRP_GPIO_X7_AUD,
+	PINGRP_SDMMC3_CLK = PINGRP_GPIO_X7_AUD + 3,
+	PINGRP_SDMMC3_CMD,
+	PINGRP_SDMMC3_DAT0,
+	PINGRP_SDMMC3_DAT1,
+	PINGRP_SDMMC3_DAT2,
+	PINGRP_SDMMC3_DAT3,
+	PINGRP_PEX_L0_RST = PINGRP_SDMMC3_DAT3 + 6, /* offset 0x33bc */
+	PINGRP_PEX_L0_CLKREQ,
+	PINGRP_PEX_WAKE,
+	PINGRP_PEX_L1_RST = PINGRP_PEX_WAKE + 2,
+	PINGRP_PEX_L1_CLKREQ,
+	PINGRP_HDMI_CEC = PINGRP_PEX_L1_CLKREQ + 4, /* offset 0x33e0 */
+	PINGRP_SDMMC1_WP_N,
+	PINGRP_SDMMC3_CD_N,
+	PINGRP_GPIO_W2_AUD,
+	PINGRP_GPIO_W3_AUD,
+	PINGRP_USB_VBUS_EN0,
+	PINGRP_USB_VBUS_EN1,
+	PINGRP_SDMMC3_CLK_LB_IN,
+	PINGRP_SDMMC3_CLK_LB_OUT,
+	PINGRP_GMI_CLK_LB,
+	PINGRP_RESET_OUT_N,
+	PINGRP_KB_ROW16,			/* offset 0x340c */
+	PINGRP_KB_ROW17,
+	PINGRP_USB_VBUS_EN2,
+	PINGRP_GPIO_PFF2,
+	PINGRP_DP_HPD,				/* last reg offset = 0x3430 */
+	PINGRP_COUNT,
+};
+
+enum pdrive_pingrp {
+	PDRIVE_PINGROUP_AO1 = 0, /* offset 0x868 */
+	PDRIVE_PINGROUP_AO2,
+	PDRIVE_PINGROUP_AT1,
+	PDRIVE_PINGROUP_AT2,
+	PDRIVE_PINGROUP_AT3,
+	PDRIVE_PINGROUP_AT4,
+	PDRIVE_PINGROUP_AT5,
+	PDRIVE_PINGROUP_CDEV1,
+	PDRIVE_PINGROUP_CDEV2,
+	PDRIVE_PINGROUP_DAP1 = 10,	/* offset 0x890 */
+	PDRIVE_PINGROUP_DAP2,
+	PDRIVE_PINGROUP_DAP3,
+	PDRIVE_PINGROUP_DAP4,
+	PDRIVE_PINGROUP_DBG,
+	PDRIVE_PINGROUP_SDIO3 = 18,	/* offset 0x8B0 */
+	PDRIVE_PINGROUP_SPI,
+	PDRIVE_PINGROUP_UAA,
+	PDRIVE_PINGROUP_UAB,
+	PDRIVE_PINGROUP_UART2,
+	PDRIVE_PINGROUP_UART3,
+	PDRIVE_PINGROUP_SDIO1 = 33,     /* offset 0x8EC */
+	PDRIVE_PINGROUP_DDC = 37,       /* offset 0x8FC */
+	PDRIVE_PINGROUP_GMA,
+	PDRIVE_PINGROUP_GME = 42,	/* offset 0x910 */
+	PDRIVE_PINGROUP_GMF,
+	PDRIVE_PINGROUP_GMG,
+	PDRIVE_PINGROUP_GMH,
+	PDRIVE_PINGROUP_OWR,
+	PDRIVE_PINGROUP_UAD,
+	PDRIVE_PINGROUP_DEV3 = 49,      /* offset 0x92c */
+	PDRIVE_PINGROUP_CEC = 52,       /* offset 0x938 */
+	PDRIVE_PINGROUP_AT6 = 75,	/* offset 0x994 */
+	PDRIVE_PINGROUP_DAP5,
+	PDRIVE_PINGROUP_VBUS,
+	PDRIVE_PINGROUP_AO3,
+	PDRIVE_PINGROUP_HVC,
+	PDRIVE_PINGROUP_SDIO4,
+	PDRIVE_PINGROUP_AO0,
+	PDRIVE_PINGROUP_COUNT,
+};
+
+/*
+ * Functions which can be assigned to each of the pin groups. The values here
+ * bear no relation to the values programmed into pinmux registers and are
+ * purely a convenience. The translation is done through a table search.
+ */
+enum pmux_func {
+	PMUX_FUNC_AHB_CLK,
+	PMUX_FUNC_APB_CLK,
+	PMUX_FUNC_AUDIO_SYNC,
+	PMUX_FUNC_CRT,
+	PMUX_FUNC_DAP1,
+	PMUX_FUNC_DAP2,
+	PMUX_FUNC_DAP3,
+	PMUX_FUNC_DAP4,
+	PMUX_FUNC_DAP5,
+	PMUX_FUNC_DISPA,
+	PMUX_FUNC_DISPB,
+	PMUX_FUNC_EMC_TEST0_DLL,
+	PMUX_FUNC_EMC_TEST1_DLL,
+	PMUX_FUNC_GMI,
+	PMUX_FUNC_GMI_INT,
+	PMUX_FUNC_HDMI,
+	PMUX_FUNC_I2C1,
+	PMUX_FUNC_I2C2,
+	PMUX_FUNC_I2C3,
+	PMUX_FUNC_IDE,
+	PMUX_FUNC_KBC,
+	PMUX_FUNC_MIO,
+	PMUX_FUNC_MIPI_HS,
+	PMUX_FUNC_NAND,
+	PMUX_FUNC_OSC,
+	PMUX_FUNC_OWR,
+	PMUX_FUNC_PCIE,
+	PMUX_FUNC_PLLA_OUT,
+	PMUX_FUNC_PLLC_OUT1,
+	PMUX_FUNC_PLLM_OUT1,
+	PMUX_FUNC_PLLP_OUT2,
+	PMUX_FUNC_PLLP_OUT3,
+	PMUX_FUNC_PLLP_OUT4,
+	PMUX_FUNC_PWM,
+	PMUX_FUNC_PWR_INTR,
+	PMUX_FUNC_PWR_ON,
+	PMUX_FUNC_RTCK,
+	PMUX_FUNC_SDMMC1,
+	PMUX_FUNC_SDMMC2,
+	PMUX_FUNC_SDMMC3,
+	PMUX_FUNC_SDMMC4,
+	PMUX_FUNC_SFLASH,
+	PMUX_FUNC_SPDIF,
+	PMUX_FUNC_SPI1,
+	PMUX_FUNC_SPI2,
+	PMUX_FUNC_SPI2_ALT,
+	PMUX_FUNC_SPI3,
+	PMUX_FUNC_SPI4,
+	PMUX_FUNC_TRACE,
+	PMUX_FUNC_TWC,
+	PMUX_FUNC_UARTA,
+	PMUX_FUNC_UARTB,
+	PMUX_FUNC_UARTC,
+	PMUX_FUNC_UARTD,
+	PMUX_FUNC_UARTE,
+	PMUX_FUNC_ULPI,
+	PMUX_FUNC_VI,
+	PMUX_FUNC_VI_SENSOR_CLK,
+	PMUX_FUNC_XIO,
+	/* End of Tegra2 MUX selectors */
+	PMUX_FUNC_BLINK,
+	PMUX_FUNC_CEC,
+	PMUX_FUNC_CLK12,
+	PMUX_FUNC_DAP,
+	PMUX_FUNC_DAPSDMMC2,
+	PMUX_FUNC_DDR,
+	PMUX_FUNC_DEV3,
+	PMUX_FUNC_DTV,
+	PMUX_FUNC_VI_ALT1,
+	PMUX_FUNC_VI_ALT2,
+	PMUX_FUNC_VI_ALT3,
+	PMUX_FUNC_EMC_DLL,
+	PMUX_FUNC_EXTPERIPH1,
+	PMUX_FUNC_EXTPERIPH2,
+	PMUX_FUNC_EXTPERIPH3,
+	PMUX_FUNC_GMI_ALT,
+	PMUX_FUNC_HDA,
+	PMUX_FUNC_HSI,
+	PMUX_FUNC_I2C4,
+	PMUX_FUNC_I2C5,
+	PMUX_FUNC_I2CPWR,
+	PMUX_FUNC_I2S0,
+	PMUX_FUNC_I2S1,
+	PMUX_FUNC_I2S2,
+	PMUX_FUNC_I2S3,
+	PMUX_FUNC_I2S4,
+	PMUX_FUNC_NAND_ALT,
+	PMUX_FUNC_POPSDIO4,
+	PMUX_FUNC_POPSDMMC4,
+	PMUX_FUNC_PWM0,
+	PMUX_FUNC_PWM1,
+	PMUX_FUNC_PWM2,
+	PMUX_FUNC_PWM3,
+	PMUX_FUNC_SATA,
+	PMUX_FUNC_SPI5,
+	PMUX_FUNC_SPI6,
+	PMUX_FUNC_SYSCLK,
+	PMUX_FUNC_VGP1,
+	PMUX_FUNC_VGP2,
+	PMUX_FUNC_VGP3,
+	PMUX_FUNC_VGP4,
+	PMUX_FUNC_VGP5,
+	PMUX_FUNC_VGP6,
+	/* End of Tegra3 MUX selectors */
+	PMUX_FUNC_USB,
+	PMUX_FUNC_SOC,
+	PMUX_FUNC_CPU,
+	PMUX_FUNC_CLK,
+	PMUX_FUNC_PWRON,
+	PMUX_FUNC_PMI,
+	PMUX_FUNC_CLDVFS,
+	PMUX_FUNC_RESET_OUT_N,
+	/* End of Tegra114 MUX selectors */
+
+	PMUX_FUNC_SAFE,
+	PMUX_FUNC_MAX,
+
+	PMUX_FUNC_INVALID = 0x4000,
+	PMUX_FUNC_RSVD1 = 0x8000,
+	PMUX_FUNC_RSVD2 = 0x8001,
+	PMUX_FUNC_RSVD3 = 0x8002,
+	PMUX_FUNC_RSVD4 = 0x8003,
+};
+
+/* return 1 if a pmux_func is in range */
+#define pmux_func_isvalid(func) \
+	((((func) >= 0) && ((func) < PMUX_FUNC_MAX)) || \
+	(((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
+
+/* return 1 if a pingrp is in range */
+#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT))
+
+/* The pullup/pulldown state of a pin group */
+enum pmux_pull {
+	PMUX_PULL_NORMAL = 0,
+	PMUX_PULL_DOWN,
+	PMUX_PULL_UP,
+};
+/* return 1 if a pin_pupd_is in range */
+#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \
+				((pupd) <= PMUX_PULL_UP))
+
+/* Defines whether a pin group is tristated or in normal operation */
+enum pmux_tristate {
+	PMUX_TRI_NORMAL = 0,
+	PMUX_TRI_TRISTATE = 1,
+};
+/* return 1 if a pin_tristate_is in range */
+#define pmux_pin_tristate_isvalid(tristate) \
+	(((tristate) >= PMUX_TRI_NORMAL) && \
+	((tristate) <= PMUX_TRI_TRISTATE))
+
+enum pmux_pin_io {
+	PMUX_PIN_OUTPUT = 0,
+	PMUX_PIN_INPUT = 1,
+	PMUX_PIN_NONE,
+};
+/* return 1 if a pin_io_is in range */
+#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
+				((io) <= PMUX_PIN_INPUT))
+
+enum pmux_pin_lock {
+	PMUX_PIN_LOCK_DEFAULT = 0,
+	PMUX_PIN_LOCK_DISABLE,
+	PMUX_PIN_LOCK_ENABLE,
+};
+/* return 1 if a pin_lock is in range */
+#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \
+				((lock) <= PMUX_PIN_LOCK_ENABLE))
+
+enum pmux_pin_od {
+	PMUX_PIN_OD_DEFAULT = 0,
+	PMUX_PIN_OD_DISABLE,
+	PMUX_PIN_OD_ENABLE,
+};
+/* return 1 if a pin_od is in range */
+#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \
+				((od) <= PMUX_PIN_OD_ENABLE))
+
+enum pmux_pin_ioreset {
+	PMUX_PIN_IO_RESET_DEFAULT = 0,
+	PMUX_PIN_IO_RESET_DISABLE,
+	PMUX_PIN_IO_RESET_ENABLE,
+};
+/* return 1 if a pin_ioreset_is in range */
+#define pmux_pin_ioreset_isvalid(ioreset) \
+				(((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
+				((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
+
+enum pmux_pin_rcv_sel {
+	PMUX_PIN_RCV_SEL_DEFAULT = 0,
+	PMUX_PIN_RCV_SEL_NORMAL,
+	PMUX_PIN_RCV_SEL_HIGH,
+};
+/* return 1 if a pin_rcv_sel_is in range */
+#define pmux_pin_rcv_sel_isvalid(rcv_sel) \
+				(((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \
+				((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
+
+/* Available power domains used by pin groups */
+enum pmux_vddio {
+	PMUX_VDDIO_BB = 0,
+	PMUX_VDDIO_LCD,
+	PMUX_VDDIO_VI,
+	PMUX_VDDIO_UART,
+	PMUX_VDDIO_DDR,
+	PMUX_VDDIO_NAND,
+	PMUX_VDDIO_SYS,
+	PMUX_VDDIO_AUDIO,
+	PMUX_VDDIO_SD,
+	PMUX_VDDIO_CAM,
+	PMUX_VDDIO_GMI,
+	PMUX_VDDIO_PEXCTL,
+	PMUX_VDDIO_SDMMC1,
+	PMUX_VDDIO_SDMMC3,
+	PMUX_VDDIO_SDMMC4,
+
+	PMUX_VDDIO_NONE
+};
+
+#define PGRP_SLWF_NONE	-1
+#define PGRP_SLWF_MAX	3
+#define PGRP_SLWR_NONE	PGRP_SLWF_NONE
+#define PGRP_SLWR_MAX	PGRP_SLWF_MAX
+
+#define PGRP_DRVUP_NONE	-1
+#define PGRP_DRVUP_MAX	127
+#define PGRP_DRVDN_NONE	PGRP_DRVUP_NONE
+#define PGRP_DRVDN_MAX	PGRP_DRVUP_MAX
+
+#define PGRP_SCHMT_NONE	-1
+#define PGRP_HSM_NONE	PGRP_SCHMT_NONE
+
+/* return 1 if a padgrp is in range */
+#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
+
+/* return 1 if a slew-rate rising/falling edge value is in range */
+#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \
+				(((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX)))
+
+/* return 1 if a driver output pull-up/down strength code value is in range */
+#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \
+				(((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX)))
+
+/* return 1 if a low-power mode value is in range */
+#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \
+				(((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X)))
+
+/* Defines a pin group cfg's low-power mode select */
+enum pgrp_lpmd {
+	PGRP_LPMD_X8 = 0,
+	PGRP_LPMD_X4,
+	PGRP_LPMD_X2,
+	PGRP_LPMD_X,
+	PGRP_LPMD_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pgrp_schmt {
+	PGRP_SCHMT_DISABLE = 0,
+	PGRP_SCHMT_ENABLE = 1,
+};
+
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pgrp_hsm {
+	PGRP_HSM_DISABLE = 0,
+	PGRP_HSM_ENABLE = 1,
+};
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct padctrl_config {
+	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
+	int slwf;			/* falling edge slew         */
+	int slwr;			/* rising edge slew          */
+	int drvup;			/* pull-up drive strength    */
+	int drvdn;			/* pull-down drive strength  */
+	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
+	enum pgrp_schmt schmt;		/* schmidt enable            */
+	enum pgrp_hsm hsm;		/* high-speed mode enable    */
+};
+
+/* Tegra124 pin drive group and pin mux registers */
+#define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
+#define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
+				PDRIVE_PINGROUP_COUNT)
+struct pmux_tri_ctlr {
+	uint pmt_reserved0[9];		/* ABP_MISC_PP_ offsets 00-20 */
+	uint pmt_cfg_ctl;		/* _CONFIG_CTL_0, offset 24        */
+
+	uint pmt_reserved[528];		/* ABP_MISC_PP_ reserved offs 28-864 */
+
+	uint pmt_drive[PDRIVE_PINGROUP_COUNT];	/* pin drive grps offs 868 */
+	uint pmt_reserved5[PMUX_OFFSET];
+	uint pmt_ctl[PINGRP_COUNT];	/* mux/pupd/tri regs, offset 0x3000 */
+};
+
+/*
+ * This defines the configuration for a pin, including the function assigned,
+ * pull up/down settings and tristate settings. Having set up one of these
+ * you can call pinmux_config_pingroup() to configure a pin in one step. Also
+ * available is pinmux_config_table() to configure a list of pins.
+ */
+struct pingroup_config {
+	enum pmux_pingrp pingroup;	/* pin group PINGRP_...             */
+	enum pmux_func func;		/* function to assign FUNC_...      */
+	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
+	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
+	enum pmux_pin_io io;		/* input or output PMUX_PIN_...  */
+	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
+	enum pmux_pin_od od;		/* open-drain or push-pull driver  */
+	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...  */
+	enum pmux_pin_rcv_sel rcv_sel;	/* select between High and Normal  */
+					/* VIL/VIH receivers */
+};
+
+/* Set a pin group to tristate */
+void pinmux_tristate_enable(enum pmux_pingrp pin);
+
+/* Set a pin group to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pingrp pin);
+
+/* Set the pull up/down feature for a pin group */
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
+
+/* Set the mux function for a pin group */
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
+
+/* Set the complete configuration for a pin group */
+void pinmux_config_pingroup(struct pingroup_config *config);
+
+/* Set a pin group to tristate or normal */
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
+
+/* Set a pin group as input or output */
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
+
+/**
+ * Configure a list of pin groups
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void pinmux_config_table(struct pingroup_config *config, int len);
+
+/* Set a group of pins from a table */
+void pinmux_init(void);
+
+/**
+ * Set the GP pad configs
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void padgrp_config_table(struct padctrl_config *config, int len);
+
+#endif	/* _TEGRA124_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/pmu.h b/arch/arm/include/asm/arch-tegra124/pmu.h
new file mode 100644
index 0000000..b10100a
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/pmu.h
@@ -0,0 +1,14 @@
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_PMU_H_
+#define _TEGRA124_PMU_H_
+
+/* Set core and CPU voltages to nominal levels */
+int pmu_set_nominal(void);
+
+#endif	/* _TEGRA124_PMU_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/spl.h b/arch/arm/include/asm/arch-tegra124/spl.h
new file mode 100644
index 0000000..e266395
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/spl.h
@@ -0,0 +1,13 @@
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_RAM 1
+
+#endif /* _ASM_ARCH_SPL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/sysctr.h b/arch/arm/include/asm/arch-tegra124/sysctr.h
new file mode 100644
index 0000000..3f0309b
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/sysctr.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_SYSCTR_H_
+#define _TEGRA124_SYSCTR_H_
+
+struct sysctr_ctlr {
+	u32 cntcr;		/* 0x00: SYSCTR0_CNTCR Counter Control */
+	u32 cntsr;		/* 0x04: SYSCTR0_CNTSR Counter Status */
+	u32 cntcv0;		/* 0x08: SYSCTR0_CNTCV0 Counter Count 31:00 */
+	u32 cntcv1;		/* 0x0C: SYSCTR0_CNTCV1 Counter Count 63:32 */
+	u32 reserved1[4];	/* 0x10 - 0x1C */
+	u32 cntfid0;		/* 0x20: SYSCTR0_CNTFID0 Freq Table Entry */
+	u32 cntfid1;		/* 0x24: SYSCTR0_CNTFID1 Freq Table End */
+	u32 reserved2[1002];	/* 0x28 - 0xFCC */
+	u32 counterid[12];	/* 0xFD0 - 0xFxx CounterID regs, RO */
+};
+
+#define TSC_CNTCR_ENABLE	(1 << 0)	/* Enable */
+#define TSC_CNTCR_HDBG		(1 << 1)	/* Halt on debug */
+
+#endif	/* _TEGRA124_SYSCTR_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/tegra.h b/arch/arm/include/asm/arch-tegra124/tegra.h
new file mode 100644
index 0000000..db3d837
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/tegra.h
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_H_
+#define _TEGRA124_H_
+
+#define NV_PA_SDRAM_BASE	0x80000000
+#define NV_PA_TSC_BASE		0x700F0000	/* System Counter TSC regs */
+#define NV_PA_MC_BASE		0x70019000	/* Mem Ctlr regs (MCB, etc.) */
+#define NV_PA_AHB_BASE		0x6000C000	/* System regs (AHB, etc.) */
+
+#include <asm/arch-tegra/tegra.h>
+
+#define BCT_ODMDATA_OFFSET	1704	/* offset to ODMDATA word */
+
+#undef NVBOOTINFOTABLE_BCTSIZE
+#undef NVBOOTINFOTABLE_BCTPTR
+#define NVBOOTINFOTABLE_BCTSIZE	0x48	/* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR	0x4C	/* BCT pointer in BIT in IRAM */
+
+#define MAX_NUM_CPU		4
+#define MCB_EMEM_ARB_OVERRIDE	(NV_PA_MC_BASE + 0xE8)
+
+#define TEGRA_USB1_BASE		0x7D000000
+
+#endif /* _TEGRA124_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/usb.h b/arch/arm/include/asm/arch-tegra124/usb.h
new file mode 100644
index 0000000..7a2d785
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/usb.h
@@ -0,0 +1,268 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_USB_H_
+#define _TEGRA124_USB_H_
+
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+	/* 0x000 */
+	uint id;
+	uint reserved0;
+	uint host;
+	uint device;
+
+	/* 0x010 */
+	uint txbuf;
+	uint rxbuf;
+	uint reserved1[2];
+
+	/* 0x020 */
+	uint reserved2[56];
+
+	/* 0x100 */
+	u16 cap_length;
+	u16 hci_version;
+	uint hcs_params;
+	uint hcc_params;
+	uint reserved3[5];
+
+	/* 0x120 */
+	uint dci_version;
+	uint dcc_params;
+	uint reserved4[2];
+
+	/* 0x130 */
+	uint usb_cmd;
+	uint usb_sts;
+	uint usb_intr;
+	uint frindex;
+
+	/* 0x140 */
+	uint reserved5;
+	uint periodic_list_base;
+	uint async_list_addr;
+	uint reserved5_1;
+
+	/* 0x150 */
+	uint burst_size;
+	uint tx_fill_tuning;
+	uint reserved6;
+	uint icusb_ctrl;
+
+	/* 0x160 */
+	uint ulpi_viewport;
+	uint reserved7;
+	uint reserved7_0;
+	uint reserved7_1;
+
+	/* 0x170 */
+	uint reserved;
+	uint port_sc1;
+	uint reserved8[6];
+
+	/* 0x190 */
+	uint reserved9[8];
+
+	/* 0x1b0 */
+	uint reserved10;
+	uint hostpc1_devlc;
+	uint reserved10_1[2];
+
+	/* 0x1c0 */
+	uint reserved10_2[4];
+
+	/* 0x1d0 */
+	uint reserved10_3[4];
+
+	/* 0x1e0 */
+	uint reserved10_4[4];
+
+	/* 0x1f0 */
+	uint reserved10_5;
+	uint otgsc;
+	uint usb_mode;
+	uint reserved10_6;
+
+	/* 0x200 */
+	uint endpt_nak;
+	uint endpt_nak_enable;
+	uint endpt_setup_stat;
+	uint reserved11_1[0x7D];
+
+	/* 0x400 */
+	uint susp_ctrl;
+	uint phy_vbus_sensors;
+	uint phy_vbus_wakeup_id;
+	uint phy_alt_vbus_sys;
+
+	/* 0x410 */
+	uint usb1_legacy_ctrl;
+	uint reserved12[3];
+
+	/* 0x420 */
+	uint reserved13[56];
+
+	/* 0x500 */
+	uint reserved14[64 * 3];
+
+	/* 0x800 */
+	uint utmip_pll_cfg0;
+	uint utmip_pll_cfg1;
+	uint utmip_xcvr_cfg0;
+	uint utmip_bias_cfg0;
+
+	/* 0x810 */
+	uint utmip_hsrx_cfg0;
+	uint utmip_hsrx_cfg1;
+	uint utmip_fslsrx_cfg0;
+	uint utmip_fslsrx_cfg1;
+
+	/* 0x820 */
+	uint utmip_tx_cfg0;
+	uint utmip_misc_cfg0;
+	uint utmip_misc_cfg1;
+	uint utmip_debounce_cfg0;
+
+	/* 0x830 */
+	uint utmip_bat_chrg_cfg0;
+	uint utmip_spare_cfg0;
+	uint utmip_xcvr_cfg1;
+	uint utmip_bias_cfg1;
+};
+
+/* USB1_LEGACY_CTRL */
+#define USB1_NO_LEGACY_MODE		1
+
+#define VBUS_SENSE_CTL_SHIFT			1
+#define VBUS_SENSE_CTL_MASK			(3 << VBUS_SENSE_CTL_SHIFT)
+#define VBUS_SENSE_CTL_VBUS_WAKEUP		0
+#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP	1
+#define VBUS_SENSE_CTL_AB_SESS_VLD		2
+#define VBUS_SENSE_CTL_A_SESS_VLD		3
+
+/* USBx_IF_USB_SUSP_CTRL_0 */
+#define UTMIP_PHY_ENB			        (1 << 12)
+#define UTMIP_RESET			        (1 << 11)
+#define USB_PHY_CLK_VALID			(1 << 7)
+#define USB_SUSP_CLR				(1 << 5)
+
+/* USBx_UTMIP_MISC_CFG0 */
+#define UTMIP_SUSPEND_EXIT_ON_EDGE		(1 << 22)
+
+/* USBx_UTMIP_MISC_CFG1 */
+#define UTMIP_PHY_XTAL_CLOCKEN			(1 << 30)
+
+/* Moved to Clock and Reset register space */
+#define UTMIP_PLLU_STABLE_COUNT_SHIFT		6
+#define UTMIP_PLLU_STABLE_COUNT_MASK		\
+				(0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
+/* Moved to Clock and Reset register space */
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT	18
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK		\
+				(0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
+
+/* USBx_UTMIP_PLL_CFG1_0 */
+/* Moved to Clock and Reset register space */
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT	27
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK	\
+				(0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
+#define UTMIP_XTAL_FREQ_COUNT_SHIFT		0
+#define UTMIP_XTAL_FREQ_COUNT_MASK		0xfff
+
+/* USBx_UTMIP_BIAS_CFG0_0 */
+#define UTMIP_HSDISCON_LEVEL_MSB		(1 << 24)
+#define UTMIP_OTGPD				(1 << 11)
+#define UTMIP_BIASPD				(1 << 10)
+#define UTMIP_HSDISCON_LEVEL_SHIFT		2
+#define UTMIP_HSDISCON_LEVEL_MASK		\
+				(0x3 << UTMIP_HSDISCON_LEVEL_SHIFT)
+#define UTMIP_HSSQUELCH_LEVEL_SHIFT		0
+#define UTMIP_HSSQUELCH_LEVEL_MASK		\
+				(0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT)
+
+/* USBx_UTMIP_BIAS_CFG1_0 */
+#define UTMIP_FORCE_PDTRK_POWERDOWN		1
+#define UTMIP_BIAS_PDTRK_COUNT_SHIFT		3
+#define UTMIP_BIAS_PDTRK_COUNT_MASK		\
+				(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
+
+/* USBx_UTMIP_DEBOUNCE_CFG0_0 */
+#define UTMIP_DEBOUNCE_CFG0_SHIFT		0
+#define UTMIP_DEBOUNCE_CFG0_MASK		0xffff
+
+/* USBx_UTMIP_TX_CFG0_0 */
+#define UTMIP_FS_PREAMBLE_J			(1 << 19)
+
+/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
+#define UTMIP_PD_CHRG				1
+
+/* USBx_UTMIP_SPARE_CFG0_0 */
+#define FUSE_SETUP_SEL				(1 << 3)
+
+/* USBx_UTMIP_HSRX_CFG0_0 */
+#define UTMIP_IDLE_WAIT_SHIFT			15
+#define UTMIP_IDLE_WAIT_MASK			(0x1f << UTMIP_IDLE_WAIT_SHIFT)
+#define UTMIP_ELASTIC_LIMIT_SHIFT		10
+#define UTMIP_ELASTIC_LIMIT_MASK		\
+				(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
+
+/* USBx_UTMIP_HSRX_CFG0_1 */
+#define UTMIP_HS_SYNC_START_DLY_SHIFT		1
+#define UTMIP_HS_SYNC_START_DLY_MASK		\
+				(0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT)
+
+/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
+#define IC_ENB1					(1 << 3)
+
+/* PORTSC1, USB1, defined for Tegra20 to avoid compiling error */
+#define PTS1_SHIFT				31
+#define PTS1_MASK				(1 << PTS1_SHIFT)
+#define STS1					(1 << 30)
+
+/* USB2D_HOSTPC1_DEVLC_0 */
+#define PTS_SHIFT				29
+#define PTS_MASK				(0x7U << PTS_SHIFT)
+#define PTS_UTMI	0
+#define PTS_RESERVED	1
+#define PTS_ULPI	2
+#define PTS_ICUSB_SER	3
+#define PTS_HSIC	4
+
+#define STS					(1 << 28)
+
+/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
+#define WKOC				(1 << 22)
+#define WKDS				(1 << 21)
+#define WKCN				(1 << 20)
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
+#define UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
+#define UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
+#define UTMIP_XCVR_LSBIAS_SE			(1 << 21)
+#define UTMIP_XCVR_HSSLEW_MSB_SHIFT		25
+#define UTMIP_XCVR_HSSLEW_MSB_MASK		\
+			(0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_MSB_SHIFT	22
+#define UTMIP_XCVR_SETUP_MSB_MASK	(0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_SHIFT		0
+#define UTMIP_XCVR_SETUP_MASK		(0xf << UTMIP_XCVR_SETUP_SHIFT)
+
+/* USBx_UTMIP_XCVR_CFG1_0 */
+#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT		18
+#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK		\
+			(0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT)
+#define UTMIP_FORCE_PDDISC_POWERDOWN		(1 << 0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN		(1 << 2)
+#define UTMIP_FORCE_PDDR_POWERDOWN		(1 << 4)
+
+/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
+#define VBUS_VLD_STS			(1 << 26)
+
+#endif	/* _TEGRA124_USB_H_ */
diff --git a/arch/arm/include/asm/arch-zynq/clk.h b/arch/arm/include/asm/arch-zynq/clk.h
new file mode 100644
index 0000000..250c5bc
--- /dev/null
+++ b/arch/arm/include/asm/arch-zynq/clk.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ZYNQ_CLK_H_
+#define _ZYNQ_CLK_H_
+
+enum zynq_clk {
+	armpll_clk, ddrpll_clk, iopll_clk,
+	cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk,
+	ddr2x_clk, ddr3x_clk, dci_clk,
+	lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk,
+	fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk,
+	sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk,
+	usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk,
+	sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk,
+	can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk,
+	uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
+	smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
+
+void zynq_clk_early_init(void);
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
+unsigned long zynq_clk_get_rate(enum zynq_clk clk);
+const char *zynq_clk_get_name(enum zynq_clk clk);
+unsigned long get_uart_clk(int dev_id);
+
+#endif
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index cd69677..39184da 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -7,6 +7,8 @@
 #ifndef _ASM_ARCH_HARDWARE_H
 #define _ASM_ARCH_HARDWARE_H
 
+#define ZYNQ_SERIAL_BASEADDR0		0xE0000000
+#define ZYNQ_SERIAL_BASEADDR1		0xE0001000
 #define ZYNQ_SYS_CTRL_BASEADDR		0xF8000000
 #define ZYNQ_DEV_CFG_APB_BASEADDR	0xF8007000
 #define ZYNQ_SCU_BASEADDR		0xF8F00000
@@ -21,17 +23,51 @@
 #define ZYNQ_SPI_BASEADDR1		0xE0007000
 #define ZYNQ_DDRC_BASEADDR		0xF8006000
 
+/* Bootmode setting values */
+#define ZYNQ_BM_MASK		0xF
+#define ZYNQ_BM_NOR		0x2
+#define ZYNQ_BM_SD		0x5
+#define ZYNQ_BM_JTAG		0x0
+
 /* Reflect slcr offsets */
 struct slcr_regs {
 	u32 scl; /* 0x0 */
 	u32 slcr_lock; /* 0x4 */
 	u32 slcr_unlock; /* 0x8 */
-	u32 reserved0[75];
+	u32 reserved0_1[61];
+	u32 arm_pll_ctrl; /* 0x100 */
+	u32 ddr_pll_ctrl; /* 0x104 */
+	u32 io_pll_ctrl; /* 0x108 */
+	u32 reserved0_2[5];
+	u32 arm_clk_ctrl; /* 0x120 */
+	u32 ddr_clk_ctrl; /* 0x124 */
+	u32 dci_clk_ctrl; /* 0x128 */
+	u32 aper_clk_ctrl; /* 0x12c */
+	u32 reserved0_3[2];
 	u32 gem0_rclk_ctrl; /* 0x138 */
 	u32 gem1_rclk_ctrl; /* 0x13c */
 	u32 gem0_clk_ctrl; /* 0x140 */
 	u32 gem1_clk_ctrl; /* 0x144 */
-	u32 reserved1[46];
+	u32 smc_clk_ctrl; /* 0x148 */
+	u32 lqspi_clk_ctrl; /* 0x14c */
+	u32 sdio_clk_ctrl; /* 0x150 */
+	u32 uart_clk_ctrl; /* 0x154 */
+	u32 spi_clk_ctrl; /* 0x158 */
+	u32 can_clk_ctrl; /* 0x15c */
+	u32 can_mioclk_ctrl; /* 0x160 */
+	u32 dbg_clk_ctrl; /* 0x164 */
+	u32 pcap_clk_ctrl; /* 0x168 */
+	u32 reserved0_4[1];
+	u32 fpga0_clk_ctrl; /* 0x170 */
+	u32 reserved0_5[3];
+	u32 fpga1_clk_ctrl; /* 0x180 */
+	u32 reserved0_6[3];
+	u32 fpga2_clk_ctrl; /* 0x190 */
+	u32 reserved0_7[3];
+	u32 fpga3_clk_ctrl; /* 0x1a0 */
+	u32 reserved0_8[8];
+	u32 clk_621_true; /* 0x1c4 */
+	u32 reserved1[14];
 	u32 pss_rst_ctrl; /* 0x200 */
 	u32 reserved2[15];
 	u32 fpga_rst_ctrl; /* 0x240 */
diff --git a/arch/arm/include/asm/arch-zynq/spl.h b/arch/arm/include/asm/arch-zynq/spl.h
new file mode 100644
index 0000000..5789d28
--- /dev/null
+++ b/arch/arm/include/asm/arch-zynq/spl.h
@@ -0,0 +1,18 @@
+/*
+ * (C) Copyright 2014 Xilinx, Inc. Michal Simek
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+extern void ps7_init(void);
+
+#define BOOT_DEVICE_NONE	0
+#define BOOT_DEVICE_RAM		1
+#define BOOT_DEVICE_SPI		2
+#define BOOT_DEVICE_MMC1	3
+#define BOOT_DEVICE_MMC2	4
+#define BOOT_DEVICE_MMC2_2	5
+
+#endif
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index 8f925af..0a2ba05 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -10,7 +10,7 @@
 extern void zynq_slcr_lock(void);
 extern void zynq_slcr_unlock(void);
 extern void zynq_slcr_cpu_reset(void);
-extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk);
+extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
 extern void zynq_slcr_devcfg_disable(void);
 extern void zynq_slcr_devcfg_enable(void);
 extern u32 zynq_slcr_get_boot_mode(void);
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 60e8726..63e4ad5 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -32,9 +32,6 @@ struct arch_global_data {
 	unsigned long tbl;
 	unsigned long lastinc;
 	unsigned long long timer_reset_value;
-#ifdef CONFIG_IXP425
-	unsigned long timestamp;
-#endif
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
 	unsigned long tlb_addr;
 	unsigned long tlb_size;
diff --git a/arch/arm/include/asm/kona-common/clk.h b/arch/arm/include/asm/kona-common/clk.h
new file mode 100644
index 0000000..2c7e829
--- /dev/null
+++ b/arch/arm/include/asm/kona-common/clk.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+/* This API file is loosely based on u-boot/drivers/video/ipu.h and linux */
+
+#ifndef __KONA_COMMON_CLK_H
+#define __KONA_COMMON_CLK_H
+
+#include <linux/types.h>
+
+struct clk;
+
+/* Only implement required functions for your specific architecture */
+int clk_init(void);
+struct clk *clk_get(const char *id);
+int clk_enable(struct clk *clk);
+void clk_disable(struct clk *clk);
+unsigned long clk_get_rate(struct clk *clk);
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+struct clk *clk_get_parent(struct clk *clk);
+int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep);
+int clk_bsc_enable(void *base);
+
+#endif
diff --git a/arch/arm/include/asm/kona-common/kona_sdhci.h b/arch/arm/include/asm/kona-common/kona_sdhci.h
new file mode 100644
index 0000000..1ff0e55
--- /dev/null
+++ b/arch/arm/include/asm/kona-common/kona_sdhci.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __KONA_SDHCI_H
+#define __KONA_SDHCI_H
+
+int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks);
+
+#endif
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 321997c..45febcf 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -32,7 +32,6 @@ endif
 ifndef CONFIG_SYS_GENERIC_BOARD
 obj-y	+= board.o
 endif
-obj-y	+= sections.o
 
 obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
@@ -43,6 +42,7 @@ else
 obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
 endif
 
+obj-y	+= sections.o
 ifdef CONFIG_ARM64
 obj-y	+= interrupts_64.o
 else
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index b770e25..e9a7708 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -105,8 +105,8 @@ static int display_banner(void)
 {
 	printf("\n\n%s\n\n", version_string);
 	debug("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
-	       _TEXT_BASE,
-	       _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE);
+	       (ulong)&_start,
+	       (ulong)&__bss_start, (ulong)&__bss_end);
 #ifdef CONFIG_MODEM_SUPPORT
 	debug("Modem Support enabled\n");
 #endif
@@ -197,8 +197,6 @@ static int arm_pci_init(void)
  */
 typedef int (init_fnc_t) (void);
 
-int print_cpuinfo(void);
-
 void __dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
@@ -250,9 +248,7 @@ init_fnc_t *init_sequence[] = {
 	serial_init,		/* serial communications setup */
 	console_init_f,		/* stage 1 init of console */
 	display_banner,		/* say that we are here */
-#if defined(CONFIG_DISPLAY_CPUINFO)
 	print_cpuinfo,		/* display cpu info (and speed) */
-#endif
 #if defined(CONFIG_DISPLAY_BOARDINFO)
 	checkboard,		/* display board info */
 #endif
@@ -277,13 +273,13 @@ void board_init_f(ulong bootflag)
 
 	memset((void *)gd, 0, sizeof(gd_t));
 
-	gd->mon_len = _bss_end_ofs;
+	gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #ifdef CONFIG_OF_EMBED
 	/* Get a pointer to the FDT */
-	gd->fdt_blob = _binary_dt_dtb_start;
+	gd->fdt_blob = __dtb_db_begin;
 #elif defined CONFIG_OF_SEPARATE
 	/* FDT is at end of image */
-	gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE);
+	gd->fdt_blob = &_end;
 #endif
 	/* Allow the early environment to override the fdt address */
 	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
@@ -322,7 +318,7 @@ void board_init_f(ulong bootflag)
 	gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
 #endif
 
-	addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
+	addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
 
 #ifdef CONFIG_LOGBUFFER
 #ifndef CONFIG_ALT_LB_ADDR
@@ -455,7 +451,7 @@ void board_init_f(ulong bootflag)
 
 	gd->relocaddr = addr;
 	gd->start_addr_sp = addr_sp;
-	gd->reloc_off = addr - _TEXT_BASE;
+	gd->reloc_off = addr - (ulong)&_start;
 	debug("relocation Offset is: %08lx\n", gd->reloc_off);
 	if (new_fdt) {
 		memcpy(new_fdt, gd->fdt_blob, fdt_size);
@@ -520,7 +516,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
 
-	monitor_flash_len = _end_ofs;
+	monitor_flash_len = (ulong)&__rel_dyn_end - (ulong)_start;
 
 	/* Enable caches */
 	enable_caches();
diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
index 603bf14..758b013 100644
--- a/arch/arm/lib/interrupts.c
+++ b/arch/arm/lib/interrupts.c
@@ -153,7 +153,7 @@ void do_prefetch_abort (struct pt_regs *pt_regs)
 
 void do_data_abort (struct pt_regs *pt_regs)
 {
-	printf ("data abort\n\n    MAYBE you should read doc/README.arm-unaligned-accesses\n\n");
+	printf ("data abort\n");
 	show_regs (pt_regs);
 	bad_mode ();
 }
diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c
index e35687c..5b30bcb 100644
--- a/arch/arm/lib/sections.c
+++ b/arch/arm/lib/sections.c
@@ -25,3 +25,4 @@ char __image_copy_start[0] __attribute__((section(".__image_copy_start")));
 char __image_copy_end[0] __attribute__((section(".__image_copy_end")));
 char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start")));
 char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end")));
+char _end[0] __attribute__((section(".__end")));
diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk
index 73fa798..c752025 100644
--- a/arch/blackfin/config.mk
+++ b/arch/blackfin/config.mk
@@ -12,7 +12,7 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x1000 -m elf32bfin
 ifeq ($(CONFIG_BFIN_CPU),)
 CONFIG_BFIN_CPU := \
 	$(shell awk '$$2 == "CONFIG_BFIN_CPU" { print $$3 }' \
-		$(src)include/configs/$(BOARD).h)
+		$(srctree)/include/configs/$(BOARD).h)
 else
 CONFIG_BFIN_CPU := $(strip $(CONFIG_BFIN_CPU:"%"=%))
 endif
@@ -28,10 +28,10 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
 PLATFORM_RELFLAGS += -mcpu=$(CONFIG_BFIN_CPU)
 
 ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
-ALL-y += $(obj)u-boot.ldr
+ALL-y += u-boot.ldr
 endif
 ifeq ($(CONFIG_ENV_IS_EMBEDDED_IN_LDR),y)
-CREATE_LDR_ENV = $(obj)tools/envcrc --binary > $(obj)env-ldr.o
+CREATE_LDR_ENV = tools/envcrc --binary > env-ldr.o
 HOSTCFLAGS_NOPED_ADSP := \
 	$(shell $(CPP) -dD - -mcpu=$(CONFIG_BFIN_CPU) </dev/null \
 		| awk '$$2 ~ /ADSP/ { print "-D" $$2 }')
@@ -47,10 +47,10 @@ LDR_FLAGS-$(CONFIG_BFIN_BOOTROM_USES_EVT1) += -J
 
 LDR_FLAGS += --bmode $(subst BFIN_BOOT_,,$(CONFIG_BFIN_BOOT_MODE))
 LDR_FLAGS += --use-vmas
-LDR_FLAGS += --initcode $(obj)$(CPUDIR)/initcode.o
+LDR_FLAGS += --initcode $(CPUDIR)/initcode.o
 ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_UART)
 LDR_FLAGS-$(CONFIG_ENV_IS_EMBEDDED_IN_LDR) += \
-	--punchit $$(($(CONFIG_ENV_OFFSET))):$$(($(CONFIG_ENV_SIZE))):$(obj)env-ldr.o
+	--punchit $$(($(CONFIG_ENV_OFFSET))):$$(($(CONFIG_ENV_SIZE))):env-ldr.o
 endif
 ifneq (,$(findstring s,$(MAKEFLAGS)))
 LDR_FLAGS += --quiet
diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile
index a61594a..cfbcd31 100644
--- a/arch/blackfin/cpu/Makefile
+++ b/arch/blackfin/cpu/Makefile
@@ -22,12 +22,13 @@ obj-y  += reset.o
 obj-y  += traps.o
 
 extra-y += check_initcode
+clean-files := init.lds
 
 # make sure our initcode (which goes into LDR) does not
 # have relocs or external references
-$(obj)initcode.o: CFLAGS += -fno-function-sections -fno-data-sections
+CFLAGS_REMOVE_initcode.o := -ffunction-sections -fdata-sections
 READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $<
-$(obj)check_initcode: $(obj)initcode.o
+$(obj)/check_initcode: $(obj)/initcode.o
 ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
 	@if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \
 		echo "$< contains external references!" 1>&2 ; \
@@ -35,7 +36,10 @@ ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
 	fi
 endif
 
-$(obj)init.lds: init.lds.S
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P $^ -o $@
-$(obj)init.elf: $(obj)init.lds $(obj)init.o $(obj)initcode.o
-	$(LD) $(LDFLAGS) -T $^ -o $@
+CPPFLAGS_init.lds := -ansi
+
+quiet_cmd_link_init = LD      $@
+      cmd_link_init = $(LD) $(LDFLAGS) -T $^ -o $@
+$(obj)/init.elf: $(obj)/init.lds $(obj)/init.o $(obj)/initcode.o
+	$(call if_changed,link_init)
+targets += init.lds init.o
diff --git a/arch/blackfin/cpu/initcode.h b/arch/blackfin/cpu/initcode.h
index 1fec7f3..ab7fa45 100644
--- a/arch/blackfin/cpu/initcode.h
+++ b/arch/blackfin/cpu/initcode.h
@@ -49,7 +49,7 @@ program_async_controller(ADI_BOOT_DATA *bs)
 
 	serial_putc('a');
 
-#ifdef __ADSPBF60x__
+#ifndef __ADSPBF60x__
 	/* Program the async banks controller. */
 #ifdef EBIU_AMGCTL
 	bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL);
@@ -74,7 +74,7 @@ program_async_controller(ADI_BOOT_DATA *bs)
 
 	serial_putc('c');
 
-#else   /* __ADSPBF60x__ */
+#else 	/* __ADSPBF60x__ */
 	/* Program the static memory controller. */
 # ifdef CONFIG_SMC_GCTL_VAL
 	bfin_write_SMC_GCTL(CONFIG_SMC_GCTL_VAL);
@@ -116,7 +116,7 @@ program_async_controller(ADI_BOOT_DATA *bs)
 	bfin_write_SMC_B3ETIM(CONFIG_SMC_B3ETIM_VAL);
 # endif
 
-#endif
+#endif /* __ADSPBF60x__ */
 	serial_putc('d');
 }
 
diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
index c99cf49..29a7c23 100644
--- a/arch/blackfin/cpu/start.S
+++ b/arch/blackfin/cpu/start.S
@@ -190,6 +190,7 @@ ENTRY(_start)
 	call _memcpy_ASM;
 #endif
 
+.Lnorelocate:
 	/* Initialize BSS section ... we know that memset() does not
 	 * use the BSS, so it is safe to call here.  The bootrom LDR
 	 * takes care of clearing things for us.
@@ -202,7 +203,6 @@ ENTRY(_start)
 	r2.h = __bss_len;
 	call _memset;
 
-.Lnorelocate:
 
 	/* Setup the actual stack in external memory */
 	sp.h = HI(CONFIG_STACKBASE);
diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h
index 4d6eeab..868c82e 100644
--- a/arch/blackfin/include/asm/blackfin_local.h
+++ b/arch/blackfin/include/asm/blackfin_local.h
@@ -42,13 +42,6 @@
 
 # include <linux/types.h>
 
-extern u_long get_vco(void);
-extern u_long get_cclk(void);
-extern u_long get_sclk(void);
-extern u_long get_sclk0(void);
-extern u_long get_sclk1(void);
-extern u_long get_dclk(void);
-
 # define bfin_revid() (bfin_read_CHIPID() >> 28)
 
 extern int bfin_os_log_check(void);
diff --git a/arch/blackfin/include/asm/clock.h b/arch/blackfin/include/asm/clock.h
index fc84fe4..59d3faa 100644
--- a/arch/blackfin/include/asm/clock.h
+++ b/arch/blackfin/include/asm/clock.h
@@ -68,10 +68,21 @@ static inline uint32_t early_get_uart_clk(void)
 	return uclk;
 }
 
+extern u_long get_vco(void);
+extern u_long get_cclk(void);
+extern u_long get_sclk(void);
+
 #ifdef CGU_DIV
+extern u_long get_sclk0(void);
+extern u_long get_sclk1(void);
+extern u_long get_dclk(void);
 # define get_uart_clk get_sclk0
+# define get_i2c_clk get_sclk0
+# define get_spi_clk get_sclk0
 #else
 # define get_uart_clk get_sclk
+# define get_i2c_clk get_sclk
+# define get_spi_clk get_sclk
 #endif
 
 #endif
diff --git a/arch/blackfin/include/asm/mach-common/bits/emac.h b/arch/blackfin/include/asm/mach-common/bits/emac.h
index 7a43bbb..4c9bc9d 100644
--- a/arch/blackfin/include/asm/mach-common/bits/emac.h
+++ b/arch/blackfin/include/asm/mach-common/bits/emac.h
@@ -217,4 +217,7 @@
 #define	TX_GE1024_CNT	0x00200000	/* 1024-Max-Byte TX Frames Sent */
 #define	TX_ABORT_CNT	0x00400000	/* TX Frames Aborted */
 
+/*default value for EMAC_VLANx reg*/
+#define EMAC_VLANX_DEF_VAL 0xFFFF
+
 #endif
diff --git a/arch/blackfin/include/asm/twi.h b/arch/blackfin/include/asm/twi.h
new file mode 100644
index 0000000..922cdbd
--- /dev/null
+++ b/arch/blackfin/include/asm/twi.h
@@ -0,0 +1,15 @@
+/*
+ * i2c.c - driver for Blackfin on-chip TWI/I2C
+ *
+ * Copyright (c) 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_TWI_H
+#define __ARCH_TWI_H
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/twi.h>
+
+#endif
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index a5c552f..4ba7bf6 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -9,7 +9,10 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-CFLAGS += -DBFIN_BOARD_NAME='"$(BOARD)"'
+# Unnecessary.
+# Use CONFIG_SYS_BOARD instead of BFIN_BOARD_NAME
+# and delete this.
+ccflags-y += -DBFIN_BOARD_NAME='"$(BOARD)"'
 
 obj-y	+= ins.o
 obj-y	+= memcmp.o
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index 392d72d..6234201 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -23,6 +23,7 @@
 
 #include <asm/cplb.h>
 #include <asm/mach-common/bits/mpu.h>
+#include <asm/clock.h>
 #include <kgdb.h>
 
 #ifdef CONFIG_CMD_NAND
@@ -142,7 +143,8 @@ void init_cplbtables(void)
 	++i;
 #if defined(__ADSPBF60x__)
 	icplb_add(0x0, 0x0);
-	dcplb_add(CONFIG_SYS_FLASH_BASE, SDRAM_EBIU);
+	dcplb_add(CONFIG_SYS_FLASH_BASE, PAGE_SIZE_16MB | CPLB_DIRTY |
+		CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID);
 	++i;
 #endif
 
diff --git a/arch/m68k/cpu/mcf5227x/Makefile b/arch/m68k/cpu/mcf5227x/Makefile
index a47fd56..e0c5db6 100644
--- a/arch/m68k/cpu/mcf5227x/Makefile
+++ b/arch/m68k/cpu/mcf5227x/Makefile
@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# CFLAGS += -DET_DEBUG
+# ccflags-y += -DET_DEBUG
 
 extra-y	= start.o
 obj-y	= cpu.o speed.o cpu_init.o interrupts.o
diff --git a/arch/m68k/cpu/mcf523x/Makefile b/arch/m68k/cpu/mcf523x/Makefile
index a47fd56..e0c5db6 100644
--- a/arch/m68k/cpu/mcf523x/Makefile
+++ b/arch/m68k/cpu/mcf523x/Makefile
@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# CFLAGS += -DET_DEBUG
+# ccflags-y += -DET_DEBUG
 
 extra-y	= start.o
 obj-y	= cpu.o speed.o cpu_init.o interrupts.o
diff --git a/arch/m68k/cpu/mcf52x2/Makefile b/arch/m68k/cpu/mcf52x2/Makefile
index d9bf900..b92fd86 100644
--- a/arch/m68k/cpu/mcf52x2/Makefile
+++ b/arch/m68k/cpu/mcf52x2/Makefile
@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# CFLAGS += -DET_DEBUG
+# ccflags-y += -DET_DEBUG
 
 extra-y	= start.o
 obj-y	= interrupts.o cpu.o speed.o cpu_init.o
diff --git a/arch/m68k/cpu/mcf532x/Makefile b/arch/m68k/cpu/mcf532x/Makefile
index 97aa3f1..9c53c50 100644
--- a/arch/m68k/cpu/mcf532x/Makefile
+++ b/arch/m68k/cpu/mcf532x/Makefile
@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# CFLAGS += -DET_DEBUG
+# ccflags-y += -DET_DEBUG
 
 extra-y := start.o
 obj-y	= cpu.o speed.o cpu_init.o interrupts.o
diff --git a/arch/m68k/cpu/mcf5445x/Makefile b/arch/m68k/cpu/mcf5445x/Makefile
index b506719..9be91ed 100644
--- a/arch/m68k/cpu/mcf5445x/Makefile
+++ b/arch/m68k/cpu/mcf5445x/Makefile
@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# CFLAGS += -DET_DEBUG
+# ccflags-y += -DET_DEBUG
 
 extra-y	= start.o
 obj-y	= cpu.o speed.o cpu_init.o interrupts.o pci.o
diff --git a/arch/m68k/cpu/mcf547x_8x/Makefile b/arch/m68k/cpu/mcf547x_8x/Makefile
index 0fa50bf..4f82099 100644
--- a/arch/m68k/cpu/mcf547x_8x/Makefile
+++ b/arch/m68k/cpu/mcf547x_8x/Makefile
@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# CFLAGS += -DET_DEBUG
+# ccflags-y += -DET_DEBUG
 
 extra-y = start.o
 obj-y	= cpu.o speed.o cpu_init.o pci.o interrupts.o slicetimer.o
diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile
index 6e201f2..4955e81 100644
--- a/arch/microblaze/cpu/Makefile
+++ b/arch/microblaze/cpu/Makefile
@@ -8,3 +8,4 @@
 extra-y	= start.o
 obj-y	= irq.o
 obj-y	+= cpu.o interrupts.o cache.o exception.o timer.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c
index 9218355..227842f 100644
--- a/arch/microblaze/cpu/exception.c
+++ b/arch/microblaze/cpu/exception.c
@@ -35,6 +35,9 @@ void _hw_exception_handler (void)
 		puts ("Divide by zero exception\n");
 		break;
 #ifdef MICROBLAZE_V5
+	case 0x7:
+		puts("Priviledged or stack protection violation exception\n");
+		break;
 	case 0x1000:
 		puts ("Exception in delay slot\n");
 		break;
diff --git a/arch/microblaze/cpu/spl.c b/arch/microblaze/cpu/spl.c
new file mode 100644
index 0000000..0912261
--- /dev/null
+++ b/arch/microblaze/cpu/spl.c
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2013 - 2014 Xilinx, Inc
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <image.h>
+#include <spl.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/u-boot.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+bool boot_linux;
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NOR;
+}
+
+/* Board initialization after bss clearance */
+void spl_board_init(void)
+{
+	gd = (gd_t *)CONFIG_SPL_STACK_ADDR;
+
+	/* enable console uart printing */
+	preloader_console_init();
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+void __noreturn jump_to_image_linux(void *arg)
+{
+	debug("Entering kernel arg pointer: 0x%p\n", arg);
+	typedef void (*image_entry_arg_t)(char *, ulong, ulong)
+		__attribute__ ((noreturn));
+	image_entry_arg_t image_entry =
+		(image_entry_arg_t)spl_image.entry_point;
+
+	image_entry(NULL, 0, (ulong)arg);
+}
+#endif /* CONFIG_SPL_OS_BOOT */
+
+int spl_start_uboot(void)
+{
+#ifdef CONFIG_SPL_OS_BOOT
+	if (boot_linux)
+		return 0;
+#endif
+
+	return 1;
+}
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 8928024..1757bbf 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -22,6 +22,11 @@ _start:
 	 */
 
 	mts	rmsr, r0	/* disable cache */
+
+#if defined(CONFIG_SPL_BUILD)
+	addi	r1, r0, CONFIG_SPL_STACK_ADDR
+	addi	r1, r1, -4	/* Decrement SP to top of memory */
+#else
 	addi	r1, r0, CONFIG_SYS_INIT_SP_OFFSET
 	addi	r1, r1, -4	/* Decrement SP to top of memory */
 
@@ -115,6 +120,7 @@ _start:
 	sh	r7, r0, r8
 	rsubi	r8, r10, 0x26
 	sh	r6, r0, r8
+#endif /* BUILD_SPL */
 
 	/* Flush cache before enable cache */
 	addik	r5, r0, 0
@@ -139,9 +145,14 @@ clear_bss:
 	cmp     r6, r5, r4 /* check if we have reach the end */
 	bnei    r6, 2b
 3:	/* jumping to board_init */
+#ifndef CONFIG_SPL_BUILD
 	brai	board_init_f
+#else
+	brai	board_init_r
+#endif
 1:	bri	1b
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * Read 16bit little endian
  */
@@ -174,3 +185,4 @@ out16:	bslli	r3, r6, 8
 	rtsd	r15, 8
 	or	r0, r0, r0
 	.end	out16
+#endif
diff --git a/arch/microblaze/cpu/timer.c b/arch/microblaze/cpu/timer.c
index 69ae6d4..3960bbb 100644
--- a/arch/microblaze/cpu/timer.c
+++ b/arch/microblaze/cpu/timer.c
@@ -34,6 +34,7 @@ void __udelay(unsigned long usec)
 	}
 }
 
+#ifndef CONFIG_SPL_BUILD
 static void timer_isr(void *arg)
 {
 	timestamp++;
@@ -62,10 +63,15 @@ int timer_init (void)
 		if (ret)
 			tmr = NULL;
 	}
-
 	/* No problem if timer is not found/initialized */
 	return 0;
 }
+#else
+int timer_init(void)
+{
+	return 0;
+}
+#endif
 
 /*
  * This function is derived from PowerPC code (read timebase as long long).
diff --git a/arch/microblaze/cpu/u-boot-spl.lds b/arch/microblaze/cpu/u-boot-spl.lds
new file mode 100644
index 0000000..96353cd
--- /dev/null
+++ b/arch/microblaze/cpu/u-boot-spl.lds
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2013 - 2014 Xilinx, Inc
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text ALIGN(0x4):
+	{
+		__text_start = .;
+		arch/microblaze/cpu/start.o (.text)
+		*(.text)
+		*(.text.*)
+		__text_end = .;
+	}
+
+	.rodata ALIGN(0x4):
+	{
+		__rodata_start = .;
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+		__rodata_end = .;
+	}
+
+	.data ALIGN(0x4):
+	{
+		__data_start = .;
+		*(.data)
+		*(.data.*)
+		__data_end = .;
+	}
+
+	.bss ALIGN(0x4):
+	{
+		__bss_start = .;
+		*(.sbss)
+		*(.scommon)
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(4);
+		__bss_end = .;
+	}
+	__end = . ;
+}
+
+#if defined(CONFIG_SPL_MAX_FOOTPRINT)
+ASSERT(__end - _start < (CONFIG_SPL_MAX_FOOTPRINT), \
+        "SPL image plus BSS too big");
+#endif
diff --git a/arch/microblaze/dts/.gitignore b/arch/microblaze/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/microblaze/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/microblaze/dts/Makefile b/arch/microblaze/dts/Makefile
new file mode 100644
index 0000000..6d4a11f
--- /dev/null
+++ b/arch/microblaze/dts/Makefile
@@ -0,0 +1,11 @@
+dtb-y += microblaze-generic.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+	@:
+
+clean-files := *.dtb
diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts
new file mode 100644
index 0000000..2033309
--- /dev/null
+++ b/arch/microblaze/dts/microblaze-generic.dts
@@ -0,0 +1,7 @@
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	aliases {
+	} ;
+} ;
diff --git a/arch/microblaze/include/asm/spl.h b/arch/microblaze/include/asm/spl.h
new file mode 100644
index 0000000..c1cae6c
--- /dev/null
+++ b/arch/microblaze/include/asm/spl.h
@@ -0,0 +1,16 @@
+/*
+ * (C) Copyright 2013 - 2014 Xilinx, Inc
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_MICROBLAZE_SPL_H_
+#define _ASM_MICROBLAZE_SPL_H_
+
+#define BOOT_DEVICE_RAM		1
+#define BOOT_DEVICE_NOR		2
+#define BOOT_DEVICE_SPI		3
+
+#endif
diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h
index 31b014c..ab3f232 100644
--- a/arch/microblaze/include/asm/u-boot.h
+++ b/arch/microblaze/include/asm/u-boot.h
@@ -25,6 +25,7 @@ typedef struct bd_info {
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
 	unsigned int	bi_baudrate;	/* Console Baudrate */
+	ulong		bi_boot_params; /* where this board expects params */
 } bd_t;
 
 /* For image.h:image_check_target_arch() */
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 896e73a..fafeeae 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -24,6 +24,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static int display_banner(void)
+{
+	printf("\n\n%s\n\n", version_string);
+	return 0;
+}
+
 /*
  * All attempts to come up with a "common" initialization sequence
  * that works for all boards and architectures failed: some of the
@@ -44,9 +50,14 @@ init_fnc_t *init_sequence[] = {
 	fdtdec_check_fdt,
 #endif
 	serial_init,
+#ifndef CONFIG_SPL_BUILD
 	console_init_f,
+#endif
+	display_banner,
+#ifndef CONFIG_SPL_BUILD
 	interrupts_init,
 	timer_init,
+#endif
 	NULL,
 };
 
@@ -59,7 +70,7 @@ void board_init_f(ulong not_used)
 	gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
 	bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET
 						- GENERATED_BD_INFO_SIZE);
-#if defined(CONFIG_CMD_FLASH)
+#if defined(CONFIG_CMD_FLASH) && !defined(CONFIG_SPL_BUILD)
 	ulong flash_size = 0;
 #endif
 	asm ("nop");	/* FIXME gd is not initialize - wait */
@@ -76,14 +87,17 @@ void board_init_f(ulong not_used)
 
 #ifdef CONFIG_OF_EMBED
 	/* Get a pointer to the FDT */
-	gd->fdt_blob = _binary_dt_dtb_start;
+	gd->fdt_blob = __dtb_dt_begin;
 #elif defined CONFIG_OF_SEPARATE
 	/* FDT is at end of image */
 	gd->fdt_blob = (void *)__end;
 #endif
+
+#ifndef CONFIG_SPL_BUILD
 	/* Allow the early environment to override the fdt address */
 	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
 						(uintptr_t)gd->fdt_blob);
+#endif
 
 	/*
 	 * The Malloc area is immediately below the monitor copy in DRAM
@@ -103,6 +117,7 @@ void board_init_f(ulong not_used)
 			hang();
 	}
 
+#ifndef CONFIG_SPL_BUILD
 #ifdef CONFIG_OF_CONTROL
 	/* For now, put this check after the console is ready */
 	if (fdtdec_prepare_fdt())
@@ -183,4 +198,5 @@ void board_init_f(ulong not_used)
 		WATCHDOG_RESET();
 		main_loop();
 	}
+#endif /* CONFIG_SPL_BUILD */
 }
diff --git a/arch/microblaze/lib/time.c b/arch/microblaze/lib/time.c
deleted file mode 100644
index e69de29..0000000
--- a/arch/microblaze/lib/time.c
+++ /dev/null
diff --git a/arch/mips/config.mk b/arch/mips/config.mk
index c3f81b5..2abdebb 100644
--- a/arch/mips/config.mk
+++ b/arch/mips/config.mk
@@ -50,4 +50,4 @@ PLATFORM_CPPFLAGS		+= -msoft-float
 PLATFORM_LDFLAGS		+= -G 0 -static -n -nostdlib $(ENDIANNESS)
 PLATFORM_RELFLAGS		+= -ffunction-sections -fdata-sections
 LDFLAGS_FINAL			+= --gc-sections -pie
-OBJCFLAGS			+= --remove-section=.dynsym
+OBJCOPYFLAGS			+= --remove-section=.dynsym
diff --git a/arch/mips/cpu/mips32/config.mk b/arch/mips/cpu/mips32/config.mk
index 067f871..7ee7faa 100644
--- a/arch/mips/cpu/mips32/config.mk
+++ b/arch/mips/cpu/mips32/config.mk
@@ -21,4 +21,4 @@ else
 PLATFORM_LDFLAGS  += -m elf32ltsmip
 endif
 
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds
+CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T $(srctree)/$(src)/mips.lds
diff --git a/arch/mips/cpu/mips64/config.mk b/arch/mips/cpu/mips64/config.mk
index d1a8b2c..02113a1 100644
--- a/arch/mips/cpu/mips64/config.mk
+++ b/arch/mips/cpu/mips64/config.mk
@@ -21,4 +21,4 @@ else
 PLATFORM_LDFLAGS  += -m elf64ltsmip
 endif
 
-CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T mips64.lds
+CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T $(srctree)/$(src)/mips64.lds
diff --git a/arch/mips/cpu/xburst/config.mk b/arch/mips/cpu/xburst/config.mk
index d81da21..00b0fd9 100644
--- a/arch/mips/cpu/xburst/config.mk
+++ b/arch/mips/cpu/xburst/config.mk
@@ -12,4 +12,4 @@ else
 PLATFORM_LDFLAGS  += -m elf32ltsmip
 endif
 
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds
+CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T $(srctree)/$(src)/mips.lds
diff --git a/arch/nds32/config.mk b/arch/nds32/config.mk
index e93e3a8..550f8a4 100644
--- a/arch/nds32/config.mk
+++ b/arch/nds32/config.mk
@@ -10,7 +10,7 @@
 
 CROSS_COMPILE ?= nds32le-linux-
 
-CONFIG_STANDALONE_LOAD_ADDR = 0x300000 -T nds32.lds
+CONFIG_STANDALONE_LOAD_ADDR = 0x300000 -T $(srctree)/$(src)/nds32.lds
 
 PLATFORM_RELFLAGS	+= -fno-strict-aliasing -fno-common -mrelax
 PLATFORM_RELFLAGS	+= -gdwarf-2
diff --git a/arch/nds32/cpu/n1213/Makefile b/arch/nds32/cpu/n1213/Makefile
index bb3550e..206d304 100644
--- a/arch/nds32/cpu/n1213/Makefile
+++ b/arch/nds32/cpu/n1213/Makefile
@@ -9,4 +9,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+# necessary to create built-in.o
+obj- := __dummy__.o
+
 extra-y	= start.o
diff --git a/arch/nds32/cpu/n1213/ag101/asm-offsets.c b/arch/nds32/cpu/n1213/ag101/asm-offsets.c
index 92ada8a..cfe52d1 100644
--- a/arch/nds32/cpu/n1213/ag101/asm-offsets.c
+++ b/arch/nds32/cpu/n1213/ag101/asm-offsets.c
@@ -21,6 +21,7 @@ int main(void)
 #endif
 	BLANK();
 #ifdef CONFIG_FTAHBC020S
+	OFFSET(FTAHBC020S_SLAVE_BSR_4,	ftahbc02s, s_bsr[4]);
 	OFFSET(FTAHBC020S_SLAVE_BSR_6,	ftahbc02s, s_bsr[6]);
 	OFFSET(FTAHBC020S_CR,		ftahbc02s, cr);
 #endif
diff --git a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S
index 810326d..d6484b9 100644
--- a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S
+++ b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S
@@ -32,6 +32,15 @@
 #define SDMC_B0_BSR_D		CONFIG_SYS_FTSDMC021_BANK0_BSR
 #define SDMC_B1_BSR_D		CONFIG_SYS_FTSDMC021_BANK1_BSR
 
+
+/*
+ * for Orca and Emerald
+ */
+#define BOARD_ID_REG		0x104
+#define BOARD_ID_FAMILY_MASK 	0xfff000
+#define BOARD_ID_FAMILY_V5   	0x556000
+#define BOARD_ID_FAMILY_K7   	0x74b000
+
 /*
  * parameters for the static memory controller
  */
@@ -47,6 +56,10 @@
 #define AHBC_CR_A		(CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
 #define AHBC_BSR6_A	(CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
 
+/*
+ * for Orca and Emerald
+ */
+#define AHBC_BSR4_A	(CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_4)
 #define AHBC_BSR6_D		CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
 
 /*
@@ -100,14 +113,49 @@ mem_init:
 	 *	we need to set onboard SDRAM before remap and relocation.
 	 */
 	led	0x01
-	write32	SMC_BANK0_CR_A, SMC_BANK0_CR_D			! 0x10000052
-	write32	SMC_BANK0_TPR_A, SMC_BANK0_TPR_D		! 0x00151151
+
+  /*
+   * for Orca and Emerald
+   * disable write protection and reset bank size
+   */
+	li	$r0, SMC_BANK0_CR_A
+	lwi $r1, [$r0+#0x00]
+	ori $r1, $r1, 0x8f0
+	xori $r1, $r1, 0x8f0
+  /*
+   * check board
+   */
+	li      $r3, CONFIG_FTPMU010_BASE + BOARD_ID_REG
+  lwi     $r3, [$r3]
+  li      $r4, BOARD_ID_FAMILY_MASK
+  and     $r3, $r3, $r4
+  li      $r4, BOARD_ID_FAMILY_K7
+  xor     $r4, $r3, $r4
+  beqz    $r4, use_flash_16bit_boot
+  /*
+   * 32-bit mode
+   */
+use_flash_32bit_boot:
+	ori     $r1, $r1, 0x50
+  li      $r2, 0x00151151
+  j       sdram_b0_cr
+  /*
+   * 16-bit mode
+   */
+use_flash_16bit_boot:
+  ori     $r1, $r1, 0x60
+  li      $r2, 0x00153153
+  /*
+   * SRAM bank0 config
+   */
+sdram_b0_cr:
+  swi     $r1, [$r0+#0x00]
+  swi     $r2, [$r0+#0x04]
 
 	/*
 	 * config AHB Controller
 	 */
 	led	0x02
-	write32	AHBC_BSR6_A, AHBC_BSR6_D
 
 	/*
 	 * config PMU controller
@@ -194,7 +242,16 @@ relo_base:
 	 * a FLASH connected to bank0.
 	 */
 	led	0x11
-	li	$r4, PHYS_SDRAM_0_AT_INIT		/* 0x10000000 */
+   /*
+    * for Orca and Emerald
+    * read sdram base address automatically
+    */
+	li	$r5, AHBC_BSR6_A
+	lwi $r8, [$r5]
+	li	$r4, 0xfff00000
+	and $r4, $r4, $r8
+
+
 	li	$r5, 0x0
 	la	$r1, relo_base				/* get $pc or $lp */
 	sub	$r2, $r0, $r1
@@ -218,6 +275,29 @@ relo_base:
 	write32 SDMC_B1_BSR_A, 0x00001040
 	setbf15	AHBC_CR_A, FTAHBC020S_CR_REMAP		! 0x1
 
+  /*
+   * for Orca and Emerald
+   * extend sdram size from 256MB to 2GB
+   */
+	li	$r5, AHBC_BSR6_A
+	lwi $r6, [$r5]
+	li  $r4, 0xfff0ffff
+	and $r6 ,$r4 , $r6
+	li	$r4, 0x000b0000
+	or  $r6, $r4,	$r6
+	swi	$r6, [$r5]
+
+  /*
+   * for Orca and Emerald
+   * extend rom base from 256MB to 2GB
+   */
+	li	$r4, AHBC_BSR4_A
+	lwi $r5, [$r4]
+	li	$r6, 0xffffff
+	and $r5, $r5, $r6
+	li  $r6, 0x80000000
+	or  $r5, $r5, $r6
+	swi $r5,	[$r4]
 #endif /* #ifdef CONFIG_MEM_REMAP */
 	move	$lp, $r11
 2:
diff --git a/arch/powerpc/cpu/mpc512x/traps.c b/arch/powerpc/cpu/mpc512x/traps.c
index 1016991..9f5bcd7 100644
--- a/arch/powerpc/cpu/mpc512x/traps.c
+++ b/arch/powerpc/cpu/mpc512x/traps.c
@@ -27,7 +27,6 @@ extern unsigned long search_exception_table(unsigned long);
  * amount of memory on the system if we're unable to keep all
  * the memory mapped in.
  */
-extern ulong get_effective_memsize(void);
 #define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
 
 /*
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index 25db899..70e09ea 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -75,6 +75,8 @@ static const char *serdes_prtcl_str[] = {
 	[XFI_FM2_MAC9] = "XFI_FM2_MAC9",
 	[XFI_FM2_MAC10] = "XFI_FM2_MAC10",
 	[INTERLAKEN] = "INTERLAKEN",
+	[QSGMII_SW1_A] = "QSGMII_SW1_A",
+	[QSGMII_SW1_B] = "QSGMII_SW1_B",
 };
 #endif
 
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 35867df..adf09ef 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -151,7 +151,8 @@ void get_sys_info(sys_info_t *sys_info)
 		sys_info->freq_processor[cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
-#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080)
+#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080) || \
+	defined(CONFIG_PPC_T2081)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
 #else
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
index 32075ce..68160a9 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -21,21 +21,6 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
 	SET_QP_INFO(8, 34, 1, 3),
 	SET_QP_INFO(9, 35, 1, 0),
 	SET_QP_INFO(10, 36, 1, 0),
-	SET_QP_INFO(11, 37, 1, 1),
-	SET_QP_INFO(12, 38, 1, 1),
-	SET_QP_INFO(13, 39, 1, 2),
-	SET_QP_INFO(14, 40, 1, 2),
-	SET_QP_INFO(15, 41, 1, 3),
-	SET_QP_INFO(16, 42, 1, 3),
-	SET_QP_INFO(17, 43, 1, 0),
-	SET_QP_INFO(18, 44, 1, 0),
-	SET_QP_INFO(19, 45, 1, 1),
-	SET_QP_INFO(20, 46, 1, 1),
-	SET_QP_INFO(21, 47, 1, 2),
-	SET_QP_INFO(22, 48, 1, 2),
-	SET_QP_INFO(23, 49, 1, 3),
-	SET_QP_INFO(24, 50, 1, 3),
-	SET_QP_INFO(25, 51, 1, 0),
 };
 #endif
 
@@ -60,11 +45,6 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_DMA_LIODN(1, 147),
 	SET_DMA_LIODN(2, 227),
 
-	SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
-	SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
-	SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
-	SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
-
 	/* SET_NEXUS_LIODN(557), -- not yet implemented */
 };
 int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
@@ -77,8 +57,6 @@ struct liodn_id_table fman1_liodn_tbl[] = {
 	SET_FMAN_RX_1G_LIODN(1, 3, 91),
 	SET_FMAN_RX_1G_LIODN(1, 4, 92),
 	SET_FMAN_RX_1G_LIODN(1, 5, 93),
-	SET_FMAN_RX_10G_LIODN(1, 0, 94),
-	SET_FMAN_RX_10G_LIODN(1, 1, 95),
 };
 int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
 #endif
@@ -97,23 +75,9 @@ struct liodn_id_table sec_liodn_tbl[] = {
 };
 int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
 
-#ifdef CONFIG_SYS_DPAA_RMAN
-struct liodn_id_table rman_liodn_tbl[] = {
-	/* Set RMan block 0-3 liodn offset */
-	SET_RMAN_LIODN(0, 678),
-	SET_RMAN_LIODN(1, 679),
-	SET_RMAN_LIODN(2, 680),
-	SET_RMAN_LIODN(3, 681),
-};
-int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
-#endif
-
 struct liodn_id_table liodn_bases[] = {
 	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(462, 558),
 #ifdef CONFIG_SYS_DPAA_FMAN
 	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
 #endif
-#ifdef CONFIG_SYS_DPAA_RMAN
-	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
-#endif
 };
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
index 94814ac..d86bb27 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
@@ -8,68 +8,59 @@
 #include <asm/fsl_serdes.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include "fsl_corenet2_serdes.h"
 
-static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = {
-	{	/* SerDes 1 */
-	[0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
-		PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1},
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+	[0x00] = {PCIE1, PCIE1, PCIE1, PCIE1,
+		PCIE2, PCIE2, PCIE2, PCIE2},
+	[0x06] = {PCIE1, PCIE1, PCIE1, PCIE1,
+		PCIE2, PCIE3, PCIE4, SATA1},
+	[0x08] = {PCIE1, PCIE1, PCIE1, PCIE1,
+		PCIE2, PCIE3, SATA2, SATA1},
+	[0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE2, PCIE2, PCIE2, PCIE2},
+	[0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+		PCIE2, PCIE2, PCIE2, PCIE2},
 	[0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
 		PCIE2, PCIE3, PCIE4, SATA1},
 	[0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
 		PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
-	[0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
-		PCIE2, PCIE2, PCIE2, PCIE2},
-	[0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
-		PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5},
-	[0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
-		PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1},
+	[0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+		PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1},
 	[0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		PCIE2, PCIE3, PCIE4, SATA1},
+	[0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
 	[0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
-	[0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		 PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
-	[0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		 PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
-	[0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		PCIE2, PCIE2, PCIE2, PCIE2},
-	[0x06] = {PCIE1, PCIE1, PCIE1, PCIE1,
-		PCIE2, PCIE3, PCIE4, SATA1},
-	[0x08] = {PCIE1, PCIE1, PCIE1, PCIE1,
-		PCIE2, PCIE3, SATA2, SATA1},
+	[0x89] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A,
+		PCIE2, PCIE3, QSGMII_SW1_B, SATA1},
+	[0x8D] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A,
+		PCIE2, QSGMII_SW1_B, QSGMII_SW1_B, QSGMII_SW1_B},
 	[0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
-	[0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
 	[0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
-	[0x00] = {PCIE1, PCIE1, PCIE1, PCIE1,
-		PCIE2, PCIE2, PCIE2, PCIE2},
-	},
-	{
-	},
-	{
-	},
-	{
-	},
+	[0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		 PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+	[0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		 PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
 };
 
-
 enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
 {
-	return serdes_cfg_tbl[serdes][cfg][lane];
+	return serdes_cfg_tbl[cfg][lane];
 }
 
 int is_serdes_prtcl_valid(int serdes, u32 prtcl)
 {
 	int i;
 
-	if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl[serdes]))
+	if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
 		return 0;
 
 	for (i = 0; i < SRDS_MAX_LANES; i++) {
-		if (serdes_cfg_tbl[serdes][prtcl][i] != NONE)
+		if (serdes_cfg_tbl[prtcl][i] != NONE)
 			return 1;
 	}
 
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
index 068e1f2..0bfd447 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
@@ -53,8 +53,10 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_USB_LIODN(1, "fsl-usb2-mph", 553),
 	SET_USB_LIODN(2, "fsl-usb2-dr", 554),
 
+#ifdef CONFIG_FSL_SATA_V2
 	SET_SATA_LIODN(1, 555),
 	SET_SATA_LIODN(2, 556),
+#endif
 
 	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
 	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
index f2fbdeb..07e27de 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
@@ -43,7 +43,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 	{0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10,
 		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
-#if defined(CONFIG_PPC_T2080)
 	{0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
 		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
@@ -129,7 +128,7 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 		XFI_FM1_MAC1, XFI_FM1_MAC2,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
 
-#elif defined(CONFIG_PPC_T2081)
+#if defined(CONFIG_PPC_T2081)
 	{0xAA, {PCIE3, PCIE3, PCIE3, PCIE3,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
 	{0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
diff --git a/arch/powerpc/cpu/mpc85xx/traps.c b/arch/powerpc/cpu/mpc85xx/traps.c
index 3ef6e4a..24adbc3 100644
--- a/arch/powerpc/cpu/mpc85xx/traps.c
+++ b/arch/powerpc/cpu/mpc85xx/traps.c
@@ -35,7 +35,6 @@ extern unsigned long search_exception_table(unsigned long);
  * amount of memory on the system if we're unable to keep all
  * the memory mapped in.
  */
-extern ulong get_effective_memsize(void);
 #define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
 
 static __inline__ void set_tsr(unsigned long val)
diff --git a/arch/powerpc/cpu/mpc86xx/traps.c b/arch/powerpc/cpu/mpc86xx/traps.c
index 0b7ea3b..92fb537 100644
--- a/arch/powerpc/cpu/mpc86xx/traps.c
+++ b/arch/powerpc/cpu/mpc86xx/traps.c
@@ -29,7 +29,6 @@ extern unsigned long search_exception_table(unsigned long);
  * amount of memory on the system if we're unable to keep all
  * the memory mapped in.
  */
-extern ulong get_effective_memsize(void);
 #define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
 
 /*
diff --git a/arch/powerpc/cpu/mpc8xx/Makefile b/arch/powerpc/cpu/mpc8xx/Makefile
index d40bdab..f83fd5e 100644
--- a/arch/powerpc/cpu/mpc8xx/Makefile
+++ b/arch/powerpc/cpu/mpc8xx/Makefile
@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# CFLAGS += -DET_DEBUG
+# ccflags-y += -DET_DEBUG
 
 extra-y += start.o
 extra-y += traps.o
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index be1d9d2..56587ae 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -22,6 +22,9 @@
 #define FSL_DDR_VER_4_7	47
 #define FSL_DDR_VER_5_0	50
 
+/* IP endianness */
+#define CONFIG_SYS_FSL_IFC_BE
+
 /* Number of TLB CAM entries we have on FSL Book-E chips */
 #if defined(CONFIG_E500MC)
 #define CONFIG_SYS_NUM_TLBCAMS		64
@@ -717,8 +720,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
 #define CONFIG_SYS_FSL_TBCLK_DIV	16
 #define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 404ded4..f60cb0a 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -69,13 +69,7 @@ enum srds_prtcl {
 	XFI_FM2_MAC9,
 	XFI_FM2_MAC10,
 	INTERLAKEN,
-	SGMII_SW1_DTSEC1,	/* SW indicates on L2 switch */
-	SGMII_SW1_DTSEC2,
-	SGMII_SW1_DTSEC3,
-	SGMII_SW1_DTSEC4,
-	SGMII_SW1_DTSEC5,
-	SGMII_SW1_DTSEC6,
-	QSGMII_SW1_A,		/* SW indicates on L2 swtich */
+	QSGMII_SW1_A,		/* Indicates ports on L2 Switch */
 	QSGMII_SW1_B,
 };
 
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 68c3c82..9d08321 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1759,6 +1759,17 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	24
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL	0x00fe0000
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	17
+#define FSL_CORENET_RCWSR13_EC1	0x30000000 /* bits 418..419 */
+#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM1_GPIO	0x10000000
+#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII	0x20000000
+#define FSL_CORENET_RCWSR13_EC2	0x0c000000 /* bits 420..421 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO	0x10000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII	0x20000000
+#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL	0x00000080
+#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH	0x00000000
+#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT	0x80000000
 #elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xff000000
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	24
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index a706d3c..e6d8be5 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -54,11 +54,11 @@ ifndef CONFIG_SPL_BUILD
 # Workaround for local bus unaligned access problems
 # on MPC512x and MPC5200
 ifdef CONFIG_MPC512X
-$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy
+AFLAGS_ppcstring.o += -Dmemcpy=__memcpy
 obj-y += memcpy_mpc5200.o
 endif
 ifdef CONFIG_MPC5200
-$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy
+AFLAGS_ppcstring.o += -Dmemcpy=__memcpy
 obj-y += memcpy_mpc5200.o
 endif
 endif
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 34bbfca..13d761c 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -312,17 +312,6 @@ static init_fnc_t *init_sequence[] = {
 	NULL,	/* Terminate this list */
 };
 
-ulong get_effective_memsize(void)
-{
-#ifndef	CONFIG_VERY_BIG_RAM
-	return gd->ram_size;
-#else
-	/* limit stack to what we can reasonable map */
-	return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
-		CONFIG_MAX_MEM_MAPPED : gd->ram_size);
-#endif
-}
-
 static int __fixup_cpu(void)
 {
 	return 0;
@@ -343,13 +332,6 @@ int fixup_cpu(void) __attribute__((weak, alias("__fixup_cpu")));
  * initialized, and stack space is limited to a few kB.
  */
 
-#ifdef CONFIG_LOGBUFFER
-unsigned long logbuffer_base(void)
-{
-	return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
-}
-#endif
-
 void board_init_f(ulong bootflag)
 {
 	bd_t *bd;
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 41fc8f7..c08b62c 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -30,7 +30,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern ulong get_effective_memsize(void);
 static ulong get_sp (void);
 extern void ft_fixup_num_cores(void *blob);
 static void set_clocks_in_mhz (bd_t *kbd);
diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk
index 6142dd4..23b057e 100644
--- a/arch/sandbox/config.mk
+++ b/arch/sandbox/config.mk
@@ -7,3 +7,7 @@ PLATFORM_LIBS += -lrt
 
 # Support generic board on sandbox
 __HAVE_ARCH_GENERIC_BOARD := y
+
+cmd_u-boot__ = $(CC) -o $@ -T u-boot.lds \
+	-Wl,--start-group $(u-boot-main) -Wl,--end-group \
+	$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map
diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile
index 58c2537..63deded 100644
--- a/arch/sandbox/cpu/Makefile
+++ b/arch/sandbox/cpu/Makefile
@@ -10,7 +10,10 @@
 obj-y	:= cpu.o os.o start.o state.o
 
 # os.c is build in the system environment, so needs standard includes
-$(obj)os.o: ALL_CFLAGS := $(BASE_CPPFLAGS) \
-	$(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS))
-$(obj).depend.os: CPPFLAGS := $(BASE_CPPFLAGS) \
-	$(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS))
+# CFLAGS_REMOVE_os.o cannot be used to drop header include path
+quiet_cmd_cc_os.o = CC $(quiet_modtag)  $@
+cmd_cc_os.o = $(CC) $(filter-out -nostdinc, \
+	$(patsubst -I%,-idirafter%,$(c_flags))) -c -o $@ $<
+
+$(obj)/os.o: $(src)/os.c FORCE
+	$(call if_changed_dep,cc_os.o)
diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk
index e94e7cb..9bb3724 100644
--- a/arch/sparc/config.mk
+++ b/arch/sparc/config.mk
@@ -7,6 +7,7 @@
 
 CROSS_COMPILE ?= sparc-elf-
 
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) -T sparc.lds
+CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \
+			-T $(srctree)/$(src)/sparc.lds
 
 PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__
diff --git a/arch/x86/dts/.gitignore b/arch/x86/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/x86/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
new file mode 100644
index 0000000..48265ef
--- /dev/null
+++ b/arch/x86/dts/Makefile
@@ -0,0 +1,12 @@
+dtb-y += link.dtb \
+	alex.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+	@:
+
+clean-files := *.dtb
diff --git a/arch/x86/dts/alex.dts b/arch/x86/dts/alex.dts
new file mode 100644
index 0000000..2f13544
--- /dev/null
+++ b/arch/x86/dts/alex.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "coreboot.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Google Alex";
+	compatible = "google,alex", "intel,atom-pineview";
+
+	config {
+	       silent_console = <0>;
+	};
+
+	gpio: gpio {};
+
+	serial {
+		reg = <0x3f8 8>;
+		clock-frequency = <115200>;
+	};
+
+	chosen { };
+	memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/arch/x86/dts/link.dts b/arch/x86/dts/link.dts
new file mode 100644
index 0000000..4a37dac
--- /dev/null
+++ b/arch/x86/dts/link.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+
+/include/ "coreboot.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Google Link";
+	compatible = "google,link", "intel,celeron-ivybridge";
+
+	config {
+	       silent_console = <0>;
+	};
+
+	gpio: gpio {};
+
+	serial {
+		reg = <0x3f8 8>;
+		clock-frequency = <115200>;
+	};
+
+	chosen { };
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	spi {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "intel,ich9";
+		spi-flash@0 {
+			reg = <0>;
+			compatible = "winbond,w25q64", "spi-flash";
+			memory-map = <0xff800000 0x00800000>;
+		};
+	};
+};
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 638f790..a35d062 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -23,5 +23,5 @@ obj-$(CONFIG_CMD_ZBOOT)	+= zimage.o
 LIBGCC := $(notdir $(NORMAL_LIBGCC))
 extra-y := $(LIBGCC)
 
-$(obj)$(LIBGCC): $(NORMAL_LIBGCC)
+$(obj)/$(LIBGCC): $(NORMAL_LIBGCC)
 	$(OBJCOPY) $< $@ --prefix-symbols=__normal_
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index 582c0ff..b5d937f 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -92,7 +92,7 @@ int find_fdt(void)
 {
 #ifdef CONFIG_OF_EMBED
 	/* Get a pointer to the FDT */
-	gd->fdt_blob = _binary_dt_dtb_start;
+	gd->fdt_blob = __dtb_dt_begin;
 #elif defined CONFIG_OF_SEPARATE
 	/* FDT is at end of image */
 	gd->fdt_blob = (ulong *)&_end;