Merge tag 'xilinx-for-v2017.07' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.07

ZynqMP:
- config cleanup
- SD LS mode support
- psu_init* cleanup
- unmap OCM
- Support for SMC

Zynq:
- add ddrc to Kconfig
- add topic-miamilite board support

8 files changed, 157 insertions, 10 deletions

diff --git a/arch/arm/cpu/armv8/zynqmp/cpu.c b/arch/arm/cpu/armv8/zynqmp/cpu.c
index b0f1295..94ecf90 100644
--- a/arch/arm/cpu/armv8/zynqmp/cpu.c
+++ b/arch/arm/cpu/armv8/zynqmp/cpu.c
@@ -38,12 +38,6 @@ static struct mm_region zynqmp_mem_map[] = {
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	}, {
-		.virt = 0xffe00000UL,
-		.phys = 0xffe00000UL,
-		.size = 0x00200000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	}, {
 		.virt = 0x400000000UL,
 		.phys = 0x400000000UL,
 		.size = 0x200000000UL,
@@ -104,3 +98,111 @@ unsigned int zynqmp_get_silicon_version(void)
 
 	return ZYNQMP_CSU_VERSION_SILICON;
 }
+
+#define ZYNQMP_MMIO_READ	0xC2000014
+#define ZYNQMP_MMIO_WRITE	0xC2000013
+
+#ifndef CONFIG_SPL_BUILD
+int invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3,
+	       u32 *ret_payload)
+{
+	/*
+	 * Added SIP service call Function Identifier
+	 * Make sure to stay in x0 register
+	 */
+	struct pt_regs regs;
+
+	regs.regs[0] = pm_api_id;
+	regs.regs[1] = ((u64)arg1 << 32) | arg0;
+	regs.regs[2] = ((u64)arg3 << 32) | arg2;
+
+	smc_call(&regs);
+
+	if (ret_payload != NULL) {
+		ret_payload[0] = (u32)regs.regs[0];
+		ret_payload[1] = upper_32_bits(regs.regs[0]);
+		ret_payload[2] = (u32)regs.regs[1];
+		ret_payload[3] = upper_32_bits(regs.regs[1]);
+		ret_payload[4] = (u32)regs.regs[2];
+	}
+
+	return regs.regs[0];
+}
+
+#define ZYNQMP_SIP_SVC_GET_API_VERSION		0xC2000001
+
+#define ZYNQMP_PM_VERSION_MAJOR		0
+#define ZYNQMP_PM_VERSION_MINOR		3
+#define ZYNQMP_PM_VERSION_MAJOR_SHIFT	16
+#define ZYNQMP_PM_VERSION_MINOR_MASK	0xFFFF
+
+#define ZYNQMP_PM_VERSION	\
+	((ZYNQMP_PM_VERSION_MAJOR << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | \
+				 ZYNQMP_PM_VERSION_MINOR)
+
+#if defined(CONFIG_CLK_ZYNQMP)
+void zynqmp_pmufw_version(void)
+{
+	int ret;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	u32 pm_api_version;
+
+	ret = invoke_smc(ZYNQMP_SIP_SVC_GET_API_VERSION, 0, 0, 0, 0,
+			 ret_payload);
+	pm_api_version = ret_payload[1];
+
+	if (ret)
+		panic("PMUFW is not found - Please load it!\n");
+
+	printf("PMUFW:\tv%d.%d\n",
+	       pm_api_version >> ZYNQMP_PM_VERSION_MAJOR_SHIFT,
+	       pm_api_version & ZYNQMP_PM_VERSION_MINOR_MASK);
+
+	if (pm_api_version != ZYNQMP_PM_VERSION)
+		panic("PMUFW version error. Expected: v%d.%d\n",
+		      ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR);
+}
+#endif
+
+int zynqmp_mmio_write(const u32 address,
+		      const u32 mask,
+		      const u32 value)
+{
+	return invoke_smc(ZYNQMP_MMIO_WRITE, address, mask, value, 0, NULL);
+}
+
+int zynqmp_mmio_read(const u32 address, u32 *value)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	u32 ret;
+
+	if (!value)
+		return -EINVAL;
+
+	ret = invoke_smc(ZYNQMP_MMIO_READ, address, 0, 0, 0, ret_payload);
+	*value = ret_payload[1];
+
+	return ret;
+}
+#else
+int zynqmp_mmio_write(const u32 address,
+		      const u32 mask,
+		      const u32 value)
+{
+	u32 data;
+	u32 value_local = value;
+
+	zynqmp_mmio_read(address, &data);
+	data &= ~mask;
+	value_local &= mask;
+	value_local |= data;
+	writel(value_local, (ulong)address);
+	return 0;
+}
+
+int zynqmp_mmio_read(const u32 address, u32 *value)
+{
+	*value = readl((ulong)address);
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c
index 0a5f430..26bf80e 100644
--- a/arch/arm/cpu/armv8/zynqmp/spl.c
+++ b/arch/arm/cpu/armv8/zynqmp/spl.c
@@ -83,9 +83,15 @@ u32 spl_boot_device(void)
 	case JTAG_MODE:
 		return BOOT_DEVICE_RAM;
 #ifdef CONFIG_SPL_MMC_SUPPORT
-	case EMMC_MODE:
-	case SD_MODE:
 	case SD_MODE1:
+	case SD1_LSHFT_MODE: /* not working on silicon v1 */
+/* if both controllers enabled, then these two are the second controller */
+#if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1)
+		return BOOT_DEVICE_MMC2;
+/* else, fall through, the one SDHCI controller that is enabled is number 1 */
+#endif
+	case SD_MODE:
+	case EMMC_MODE:
 		return BOOT_DEVICE_MMC1;
 #endif
 #ifdef CONFIG_SPL_DFU_SUPPORT
@@ -106,10 +112,11 @@ u32 spl_boot_device(void)
 
 u32 spl_boot_mode(const u32 boot_device)
 {
-	switch (spl_boot_device()) {
+	switch (boot_device) {
 	case BOOT_DEVICE_RAM:
 		return 0;
 	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
 		return MMCSD_MODE_FS;
 	default:
 		puts("spl: error: unsupported device\n");
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7b405e5..a01c9b6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-microzed.dtb \
 	zynq-picozed.dtb \
 	zynq-topic-miami.dtb \
+	zynq-topic-miamilite.dtb \
 	zynq-topic-miamiplus.dtb \
 	zynq-zc770-xm010.dtb \
 	zynq-zc770-xm011.dtb \
diff --git a/arch/arm/dts/zynq-topic-miamilite.dts b/arch/arm/dts/zynq-topic-miamilite.dts
new file mode 100644
index 0000000..f88cb4b
--- /dev/null
+++ b/arch/arm/dts/zynq-topic-miamilite.dts
@@ -0,0 +1,17 @@
+/*
+ * Topic Miami Lite board DTS
+ *
+ * Copyright (C) 2017 Topic Embedded Products
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include "zynq-topic-miami.dts"
+
+/ {
+	model = "Topic Miami Lite Zynq Board";
+	compatible = "topic,miamilite", "xlnx,zynq-7000";
+};
+
+&qspi {
+	is-dual = <1>;
+};
diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
index 7b11895..d91d98a 100644
--- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
@@ -8,6 +8,8 @@
 #ifndef _ASM_ARCH_SYS_PROTO_H
 #define _ASM_ARCH_SYS_PROTO_H
 
+#define PAYLOAD_ARG_CNT		5
+
 int zynq_slcr_get_mio_pin_status(const char *periph);
 
 unsigned int zynqmp_get_silicon_version(void);
@@ -16,4 +18,10 @@ void psu_init(void);
 
 void handoff_setup(void);
 
+void zynqmp_pmufw_version(void);
+int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value);
+int zynqmp_mmio_read(const u32 address, u32 *value);
+int invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3,
+	       u32 *ret_payload);
+
 #endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 2529c9f..c428ce5 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -24,6 +24,14 @@ config SPL_SPI_FLASH_SUPPORT
 config SPL_SPI_SUPPORT
 	default y if ZYNQ_QSPI
 
+config ZYNQ_DDRC_INIT
+	bool "Zynq DDRC initialization"
+	default y
+	help
+	  This option used to perform DDR specific initialization
+	  if required. There might be cases like ddr less where we
+	  want to skip ddr init and this option is useful for it.
+
 config SYS_BOARD
 	default "zynq"
 
diff --git a/arch/arm/mach-zynq/ddrc.c b/arch/arm/mach-zynq/ddrc.c
index d74f8db..bde52d6 100644
--- a/arch/arm/mach-zynq/ddrc.c
+++ b/arch/arm/mach-zynq/ddrc.c
@@ -12,6 +12,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifndef CONFIG_ZYNQ_DDRC_INIT
+void zynq_ddrc_init(void) {}
+#else
 /* Control regsiter bitfield definitions */
 #define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK		0xC
 #define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT	2
@@ -46,3 +49,4 @@ void zynq_ddrc_init(void)
 		puts("ECC disabled ");
 	}
 }
+#endif
diff --git a/arch/microblaze/dts/Makefile b/arch/microblaze/dts/Makefile
index 5e70d9e..f80d8fd 100644
--- a/arch/microblaze/dts/Makefile
+++ b/arch/microblaze/dts/Makefile
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-dtb-y += microblaze-generic.dtb
+dtb-y += $(shell echo $(CONFIG_DEFAULT_DEVICE_TREE)).dtb
 
 targets += $(dtb-y)