diff options
author | Simon Glass <sjg@chromium.org> | 2017-05-13 03:09:50 (GMT) |
---|---|---|
committer | Heiko Schocher <hs@denx.de> | 2017-05-15 04:17:25 (GMT) |
commit | 7ffce4f17fdbb110f572dae60670ec28db731ef2 (patch) | |
tree | 7ef00f762601cf9dab54e93f63cf79840650da40 /arch | |
parent | eb5ba3aefdf0f6cbd61684eeb61428f11fa7613c (diff) | |
download | u-boot-7ffce4f17fdbb110f572dae60670ec28db731ef2.tar.xz |
i2c: powerpc: Remove use of CONFIG_HARD_I2C
Drop use of this long-deprecated option for powerpc.
Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/cpu/mpc512x/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc512x/i2c.c | 386 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc5xxx/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc5xxx/i2c.c | 456 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8260/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8260/commproc.c | 4 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8260/i2c.c | 741 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xx/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xx/i2c.c | 672 |
9 files changed, 1 insertions, 2263 deletions
diff --git a/arch/powerpc/cpu/mpc512x/Makefile b/arch/powerpc/cpu/mpc512x/Makefile index 98991c6..933deeb 100644 --- a/arch/powerpc/cpu/mpc512x/Makefile +++ b/arch/powerpc/cpu/mpc512x/Makefile @@ -9,7 +9,6 @@ obj-y := cpu.o obj-y += traps.o obj-y += cpu_init.o obj-y += fixed_sdram.o -obj-y += i2c.o obj-y += interrupts.o obj-y += iopin.o obj-y += serial.o diff --git a/arch/powerpc/cpu/mpc512x/i2c.c b/arch/powerpc/cpu/mpc512x/i2c.c deleted file mode 100644 index 15d519a..0000000 --- a/arch/powerpc/cpu/mpc512x/i2c.c +++ /dev/null @@ -1,386 +0,0 @@ -/* - * (C) Copyright 2003 - 2009 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Based on the MPC5xxx code. - */ - -#include <common.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_HARD_I2C - -#include <i2c.h> - -/* by default set I2C bus 0 active */ -static unsigned int bus_num __attribute__ ((section (".data"))) = 0; - -#define I2C_TIMEOUT 100 -#define I2C_RETRIES 3 - -struct mpc512x_i2c_tap { - int scl2tap; - int tap2tap; -}; - -static int mpc_reg_in(volatile u32 *reg); -static void mpc_reg_out(volatile u32 *reg, int val, int mask); -static int wait_for_bb(void); -static int wait_for_pin(int *status); -static int do_address(uchar chip, char rdwr_flag); -static int send_bytes(uchar chip, char *buf, int len); -static int receive_bytes(uchar chip, char *buf, int len); -static int mpc_get_fdr(int); - -static int mpc_reg_in (volatile u32 *reg) -{ - int ret = in_be32(reg) >> 24; - - return ret; -} - -static void mpc_reg_out (volatile u32 *reg, int val, int mask) -{ - if (!mask) { - out_be32(reg, val << 24); - } else { - clrsetbits_be32(reg, mask << 24, (val & mask) << 24); - } -} - -static int wait_for_bb (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - int timeout = I2C_TIMEOUT; - int status; - - status = mpc_reg_in (®s->msr); - - while (timeout-- && (status & I2C_BB)) { - mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); - (void)mpc_reg_in(®s->mdr); - mpc_reg_out (®s->mcr, 0, I2C_STA); - mpc_reg_out (®s->mcr, 0, 0); - mpc_reg_out (®s->mcr, I2C_EN, 0); - - udelay (1000); - status = mpc_reg_in (®s->msr); - } - - return (status & I2C_BB); -} - -static int wait_for_pin (int *status) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - int timeout = I2C_TIMEOUT; - - *status = mpc_reg_in (®s->msr); - - while (timeout-- && !(*status & I2C_IF)) { - udelay (1000); - *status = mpc_reg_in (®s->msr); - } - - if (!(*status & I2C_IF)) { - return -1; - } - - mpc_reg_out (®s->msr, 0, I2C_IF); - - return 0; -} - -static int do_address (uchar chip, char rdwr_flag) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - int status; - - chip <<= 1; - - if (rdwr_flag) { - chip |= 1; - } - - mpc_reg_out (®s->mcr, I2C_TX, I2C_TX); - mpc_reg_out (®s->mdr, chip, 0); - - if (wait_for_pin (&status)) { - return -2; - } - - if (status & I2C_RXAK) { - return -3; - } - - return 0; -} - -static int send_bytes (uchar chip, char *buf, int len) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - int wrcount; - int status; - - for (wrcount = 0; wrcount < len; ++wrcount) { - - mpc_reg_out (®s->mdr, buf[wrcount], 0); - - if (wait_for_pin (&status)) { - break; - } - - if (status & I2C_RXAK) { - break; - } - - } - - return !(wrcount == len); -} - -static int receive_bytes (uchar chip, char *buf, int len) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - int dummy = 1; - int rdcount = 0; - int status; - int i; - - mpc_reg_out (®s->mcr, 0, I2C_TX); - - for (i = 0; i < len; ++i) { - buf[rdcount] = mpc_reg_in (®s->mdr); - - if (dummy) { - dummy = 0; - } else { - rdcount++; - } - - if (wait_for_pin (&status)) { - return -4; - } - } - - mpc_reg_out (®s->mcr, I2C_TXAK, I2C_TXAK); - buf[rdcount++] = mpc_reg_in (®s->mdr); - - if (wait_for_pin (&status)) { - return -5; - } - - mpc_reg_out (®s->mcr, 0, I2C_TXAK); - - return 0; -} - -/**************** I2C API ****************/ - -void i2c_init (int speed, int saddr) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - int i; - - for (i = 0; i < I2C_BUS_CNT; i++){ - volatile i2c512x_dev_t *regs = &im->i2c.dev[i]; - - mpc_reg_out (®s->mcr, 0, 0); - - /* Set clock */ - mpc_reg_out (®s->mfdr, mpc_get_fdr (speed), 0); - mpc_reg_out (®s->madr, saddr << 1, 0); - - /* Enable module */ - mpc_reg_out (®s->mcr, I2C_EN, I2C_INIT_MASK); - mpc_reg_out (®s->msr, 0, I2C_IF); - } - - /* Disable interrupts */ - out_be32(&im->i2c.icr, 0); - - /* Turn off filters */ - out_be32(&im->i2c.mifr, 0); -} - -static int mpc_get_fdr (int speed) -{ - static int fdr = -1; - - if (fdr == -1) { - ulong best_speed = 0; - ulong divider; - ulong ips, scl; - ulong bestmatch = 0xffffffffUL; - int best_i = 0, best_j = 0, i, j; - int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8}; - struct mpc512x_i2c_tap scltap[] = { - {4, 1}, - {4, 2}, - {6, 4}, - {6, 8}, - {14, 16}, - {30, 32}, - {62, 64}, - {126, 128} - }; - - ips = gd->arch.ips_clk; - for (i = 7; i >= 0; i--) { - for (j = 7; j >= 0; j--) { - scl = 2 * (scltap[j].scl2tap + - (SCL_Tap[i] - 1) * scltap[j].tap2tap - + 2); - if (ips <= speed*scl) { - if ((speed*scl - ips) < bestmatch) { - bestmatch = speed*scl - ips; - best_i = i; - best_j = j; - best_speed = ips/scl; - } - } - } - } - divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2); - if (gd->flags & GD_FLG_RELOC) { - fdr = divider; - } else { - debug("%ld kHz, \n", best_speed / 1000); - return divider; - } - } - - return fdr; -} - -int i2c_probe (uchar chip) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - int i; - - for (i = 0; i < I2C_RETRIES; i++) { - mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); - - if (! do_address (chip, 0)) { - mpc_reg_out (®s->mcr, 0, I2C_STA); - udelay (500); - break; - } - - mpc_reg_out (®s->mcr, 0, I2C_STA); - udelay (500); - } - - return (i == I2C_RETRIES); -} - -int i2c_read (uchar chip, uint addr, int alen, uchar *buf, int len) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - char xaddr[4]; - int ret = -1; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - - if (wait_for_bb ()) { - printf ("i2c_read: bus is busy\n"); - goto Done; - } - - mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); - if (do_address (chip, 0)) { - printf ("i2c_read: failed to address chip\n"); - goto Done; - } - - if (send_bytes (chip, &xaddr[4-alen], alen)) { - printf ("i2c_read: send_bytes failed\n"); - goto Done; - } - - mpc_reg_out (®s->mcr, I2C_RSTA, I2C_RSTA); - if (do_address (chip, 1)) { - printf ("i2c_read: failed to address chip\n"); - goto Done; - } - - if (receive_bytes (chip, (char *)buf, len)) { - printf ("i2c_read: receive_bytes failed\n"); - goto Done; - } - - ret = 0; -Done: - mpc_reg_out (®s->mcr, 0, I2C_STA); - return ret; -} - -int i2c_write (uchar chip, uint addr, int alen, uchar *buf, int len) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; - char xaddr[4]; - int ret = -1; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - - if (wait_for_bb ()) { - printf ("i2c_write: bus is busy\n"); - goto Done; - } - - mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); - if (do_address (chip, 0)) { - printf ("i2c_write: failed to address chip\n"); - goto Done; - } - - if (send_bytes (chip, &xaddr[4-alen], alen)) { - printf ("i2c_write: send_bytes failed\n"); - goto Done; - } - - if (send_bytes (chip, (char *)buf, len)) { - printf ("i2c_write: send_bytes failed\n"); - goto Done; - } - - ret = 0; -Done: - mpc_reg_out (®s->mcr, 0, I2C_STA); - return ret; -} - -int i2c_set_bus_num (unsigned int bus) -{ - if (bus >= I2C_BUS_CNT) { - return -1; - } - bus_num = bus; - - return 0; -} - -unsigned int i2c_get_bus_num (void) -{ - return bus_num; -} - -#endif /* CONFIG_HARD_I2C */ diff --git a/arch/powerpc/cpu/mpc5xxx/Makefile b/arch/powerpc/cpu/mpc5xxx/Makefile index 5c67e1d..88e3b2e 100644 --- a/arch/powerpc/cpu/mpc5xxx/Makefile +++ b/arch/powerpc/cpu/mpc5xxx/Makefile @@ -9,7 +9,6 @@ extra-y = start.o extra-y += traps.o obj-y += io.o obj-y += firmware_sc_task_bestcomm.impl.o -obj-y += i2c.o obj-y += cpu.o obj-y += cpu_init.o obj-y += ide.o diff --git a/arch/powerpc/cpu/mpc5xxx/i2c.c b/arch/powerpc/cpu/mpc5xxx/i2c.c deleted file mode 100644 index 73601ae..0000000 --- a/arch/powerpc/cpu/mpc5xxx/i2c.c +++ /dev/null @@ -1,456 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_HARD_I2C - -#include <mpc5xxx.h> -#include <i2c.h> - -#if !defined(CONFIG_I2C_MULTI_BUS) -#if (CONFIG_SYS_I2C_MODULE == 2) -#define I2C_BASE MPC5XXX_I2C2 -#elif (CONFIG_SYS_I2C_MODULE == 1) -#define I2C_BASE MPC5XXX_I2C1 -#else -#error CONFIG_SYS_I2C_MODULE is not properly configured -#endif -#else -static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = - CONFIG_SYS_SPD_BUS_NUM; -static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, - CONFIG_SYS_I2C_SPEED}; - -static const unsigned long i2c_dev[2] = { - MPC5XXX_I2C1, - MPC5XXX_I2C2, -}; - -#define I2C_BASE ((struct mpc5xxx_i2c *)i2c_dev[i2c_bus_num]) -#endif - -#define I2C_TIMEOUT 6667 -#define I2C_RETRIES 3 - -struct mpc5xxx_i2c_tap { - int scl2tap; - int tap2tap; -}; - -static int mpc_reg_in (volatile u32 *reg); -static void mpc_reg_out (volatile u32 *reg, int val, int mask); -static int wait_for_bb (void); -static int wait_for_pin (int *status); -static int do_address (uchar chip, char rdwr_flag); -static int send_bytes (uchar chip, char *buf, int len); -static int receive_bytes (uchar chip, char *buf, int len); -static int mpc_get_fdr (int); - -static int mpc_reg_in(volatile u32 *reg) -{ - int ret = *reg >> 24; - __asm__ __volatile__ ("eieio"); - return ret; -} - -static void mpc_reg_out(volatile u32 *reg, int val, int mask) -{ - int tmp; - - if (!mask) { - *reg = val << 24; - } else { - tmp = mpc_reg_in(reg); - *reg = ((tmp & ~mask) | (val & mask)) << 24; - } - __asm__ __volatile__ ("eieio"); - - return; -} - -static int wait_for_bb(void) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int timeout = I2C_TIMEOUT; - int status; - - status = mpc_reg_in(®s->msr); - - while (timeout-- && (status & I2C_BB)) { - mpc_reg_out(®s->mcr, I2C_STA, I2C_STA); - (void)mpc_reg_in(®s->mdr); - mpc_reg_out(®s->mcr, 0, I2C_STA); - mpc_reg_out(®s->mcr, 0, 0); - mpc_reg_out(®s->mcr, I2C_EN, 0); - udelay(15); - status = mpc_reg_in(®s->msr); - } - - return (status & I2C_BB); -} - -static int wait_for_pin(int *status) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int timeout = I2C_TIMEOUT; - - *status = mpc_reg_in(®s->msr); - - while (timeout-- && !(*status & I2C_IF)) { - udelay(15); - *status = mpc_reg_in(®s->msr); - } - - if (!(*status & I2C_IF)) { - return -1; - } - - mpc_reg_out(®s->msr, 0, I2C_IF); - - return 0; -} - -static int do_address(uchar chip, char rdwr_flag) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int status; - - chip <<= 1; - - if (rdwr_flag) { - chip |= 1; - } - - mpc_reg_out(®s->mcr, I2C_TX, I2C_TX); - mpc_reg_out(®s->mdr, chip, 0); - - if (wait_for_pin(&status)) { - return -2; - } - - if (status & I2C_RXAK) { - return -3; - } - - return 0; -} - -static int send_bytes(uchar chip, char *buf, int len) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int wrcount; - int status; - - for (wrcount = 0; wrcount < len; ++wrcount) { - - mpc_reg_out(®s->mdr, buf[wrcount], 0); - - if (wait_for_pin(&status)) { - break; - } - - if (status & I2C_RXAK) { - break; - } - - } - - return !(wrcount == len); -} - -static int receive_bytes(uchar chip, char *buf, int len) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int dummy = 1; - int rdcount = 0; - int status; - int i; - - mpc_reg_out(®s->mcr, 0, I2C_TX); - - for (i = 0; i < len; ++i) { - buf[rdcount] = mpc_reg_in(®s->mdr); - - if (dummy) { - dummy = 0; - } else { - rdcount++; - } - - - if (wait_for_pin(&status)) { - return -4; - } - } - - mpc_reg_out(®s->mcr, I2C_TXAK, I2C_TXAK); - buf[rdcount++] = mpc_reg_in(®s->mdr); - - if (wait_for_pin(&status)) { - return -5; - } - - mpc_reg_out(®s->mcr, 0, I2C_TXAK); - - return 0; -} - -#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX) - -#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3)) -#define FDR432(x) (u8) ((x & 0x1C) >> 2) -/* - * Reset any i2c devices that may have been interrupted during a system reset. - * Normally this would be accomplished by clocking the line until SCL and SDA - * are released and then sending a start condtiion (From an Atmel datasheet). - * There is no direct access to the i2c pins so instead create start commands - * through the i2c interface. Send a start command then delay for the SDA Hold - * time, repeat this by disabling/enabling the bus a total of 9 times. - */ -static void send_reset(void) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int i; - u32 delay; - u8 fdr; - int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2}; - struct mpc5xxx_i2c_tap scltap[] = { - {4, 1}, - {4, 2}, - {6, 4}, - {6, 8}, - {14, 16}, - {30, 32}, - {62, 64}, - {126, 128} - }; - - fdr = (u8)mpc_reg_in(®s->mfdr); - - delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \ - scltap[FDR432(fdr)].tap2tap) + 3; - - for (i = 0; i < 9; i++) { - mpc_reg_out(®s->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK); - udelay(delay); - mpc_reg_out(®s->mcr, 0, I2C_INIT_MASK); - udelay(delay); - } - - mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK); -} -#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */ - -/**************** I2C API ****************/ - -void i2c_init(int speed, int saddr) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - - mpc_reg_out(®s->mcr, 0, 0); - mpc_reg_out(®s->madr, saddr << 1, 0); - - /* Set clock - */ - mpc_reg_out(®s->mfdr, mpc_get_fdr(speed), 0); - - /* Enable module - */ - mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK); - mpc_reg_out(®s->msr, 0, I2C_IF); - -#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX) - send_reset(); -#endif - return; -} - -static int mpc_get_fdr(int speed) -{ - static int fdr = -1; - - if (fdr == -1) { - ulong best_speed = 0; - ulong divider; - ulong ipb, scl; - ulong bestmatch = 0xffffffffUL; - int best_i = 0, best_j = 0, i, j; - int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8}; - struct mpc5xxx_i2c_tap scltap[] = { - {4, 1}, - {4, 2}, - {6, 4}, - {6, 8}, - {14, 16}, - {30, 32}, - {62, 64}, - {126, 128} - }; - - ipb = gd->arch.ipb_clk; - for (i = 7; i >= 0; i--) { - for (j = 7; j >= 0; j--) { - scl = 2 * (scltap[j].scl2tap + - (SCL_Tap[i] - 1) * scltap[j].tap2tap + 2); - if (ipb <= speed*scl) { - if ((speed*scl - ipb) < bestmatch) { - bestmatch = speed*scl - ipb; - best_i = i; - best_j = j; - best_speed = ipb/scl; - } - } - } - } - divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2); - if (gd->flags & GD_FLG_RELOC) { - fdr = divider; - } else { - printf("%ld kHz, ", best_speed / 1000); - return divider; - } - } - - return fdr; -} - -int i2c_probe(uchar chip) -{ - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int i; - - for (i = 0; i < I2C_RETRIES; i++) { - mpc_reg_out(®s->mcr, I2C_STA, I2C_STA); - - if (! do_address(chip, 0)) { - mpc_reg_out(®s->mcr, 0, I2C_STA); - udelay(500); - break; - } - - mpc_reg_out(®s->mcr, 0, I2C_STA); - udelay(500); - } - - return (i == I2C_RETRIES); -} - -int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) -{ - char xaddr[4]; - struct mpc5xxx_i2c * regs = (struct mpc5xxx_i2c *)I2C_BASE; - int ret = -1; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - - if (wait_for_bb()) { - printf("i2c_read: bus is busy\n"); - goto Done; - } - - mpc_reg_out(®s->mcr, I2C_STA, I2C_STA); - if (do_address(chip, 0)) { - printf("i2c_read: failed to address chip\n"); - goto Done; - } - - if (send_bytes(chip, &xaddr[4-alen], alen)) { - printf("i2c_read: send_bytes failed\n"); - goto Done; - } - - mpc_reg_out(®s->mcr, I2C_RSTA, I2C_RSTA); - if (do_address(chip, 1)) { - printf("i2c_read: failed to address chip\n"); - goto Done; - } - - if (receive_bytes(chip, (char *)buf, len)) { - printf("i2c_read: receive_bytes failed\n"); - goto Done; - } - - ret = 0; -Done: - mpc_reg_out(®s->mcr, 0, I2C_STA); - return ret; -} - -int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) -{ - char xaddr[4]; - struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE; - int ret = -1; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - - if (wait_for_bb()) { - printf("i2c_write: bus is busy\n"); - goto Done; - } - - mpc_reg_out(®s->mcr, I2C_STA, I2C_STA); - if (do_address(chip, 0)) { - printf("i2c_write: failed to address chip\n"); - goto Done; - } - - if (send_bytes(chip, &xaddr[4-alen], alen)) { - printf("i2c_write: send_bytes failed\n"); - goto Done; - } - - if (send_bytes(chip, (char *)buf, len)) { - printf("i2c_write: send_bytes failed\n"); - goto Done; - } - - ret = 0; -Done: - mpc_reg_out(®s->mcr, 0, I2C_STA); - return ret; -} - -#if defined(CONFIG_I2C_MULTI_BUS) -int i2c_set_bus_num(unsigned int bus) -{ - if (bus > 1) - return -1; - - i2c_bus_num = bus; - i2c_init(i2c_bus_speed[bus], CONFIG_SYS_I2C_SLAVE); - return 0; -} - -int i2c_set_bus_speed(unsigned int speed) -{ - i2c_init(speed, CONFIG_SYS_I2C_SLAVE); - return 0; -} - -unsigned int i2c_get_bus_num(void) -{ - return i2c_bus_num; -} - -unsigned int i2c_get_bus_speed(void) -{ - return i2c_bus_speed[i2c_bus_num]; -} -#endif - - -#endif /* CONFIG_HARD_I2C */ diff --git a/arch/powerpc/cpu/mpc8260/Makefile b/arch/powerpc/cpu/mpc8260/Makefile index 83adc4c..72dd8ab 100644 --- a/arch/powerpc/cpu/mpc8260/Makefile +++ b/arch/powerpc/cpu/mpc8260/Makefile @@ -7,7 +7,7 @@ extra-y = start.o obj-y = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \ - interrupts.o ether_fcc.o i2c.o commproc.o \ + interrupts.o ether_fcc.o commproc.o \ bedbug_603e.o pci.o spi.o kgdb.o obj-$(CONFIG_ETHER_ON_SCC) += ether_scc.o diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c index 484bd17..ff69881 100644 --- a/arch/powerpc/cpu/mpc8260/commproc.c +++ b/arch/powerpc/cpu/mpc8260/commproc.c @@ -41,10 +41,6 @@ m8260_cpm_reset(void) do { /* Spin until command processed */ __asm__ __volatile__ ("eieio"); } while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000); - -#ifdef CONFIG_HARD_I2C - immr->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)] = 0; -#endif } /* Allocate some memory from the dual ported ram. diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c deleted file mode 100644 index a0de101..0000000 --- a/arch/powerpc/cpu/mpc8260/i2c.c +++ /dev/null @@ -1,741 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * - * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <console.h> - -#if defined(CONFIG_HARD_I2C) - -#include <asm/cpm_8260.h> -#include <i2c.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_I2C_MULTI_BUS) -static unsigned int i2c_bus_num __attribute__ ((section(".data"))) = 0; -#endif /* CONFIG_I2C_MULTI_BUS */ - -/* uSec to wait between polls of the i2c */ -#define DELAY_US 100 -/* uSec to wait for the CPM to start processing the buffer */ -#define START_DELAY_US 1000 - -/* - * tx/rx per-byte timeout: we delay DELAY_US uSec between polls so the - * timeout will be (tx_length + rx_length) * DELAY_US * TOUT_LOOP - */ -#define TOUT_LOOP 5 - -/* - * Set default values - */ -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 -#endif - - -typedef void (*i2c_ecb_t) (int, int, void *); /* error callback function */ - -/* This structure keeps track of the bd and buffer space usage. */ -typedef struct i2c_state { - int rx_idx; /* index to next free Rx BD */ - int tx_idx; /* index to next free Tx BD */ - void *rxbd; /* pointer to next free Rx BD */ - void *txbd; /* pointer to next free Tx BD */ - int tx_space; /* number of Tx bytes left */ - unsigned char *tx_buf; /* pointer to free Tx area */ - i2c_ecb_t err_cb; /* error callback function */ - void *cb_data; /* private data to be passed */ -} i2c_state_t; - -/* flags for i2c_send() and i2c_receive() */ -#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */ -#define I2CF_START_COND 0x02 /* tx: generate start condition */ -#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */ - -/* return codes */ -#define I2CERR_NO_BUFFERS 1 /* no more BDs or buffer space */ -#define I2CERR_MSG_TOO_LONG 2 /* tried to send/receive to much data */ -#define I2CERR_TIMEOUT 3 /* timeout in i2c_doio() */ -#define I2CERR_QUEUE_EMPTY 4 /* i2c_doio called without send/rcv */ -#define I2CERR_IO_ERROR 5 /* had an error during comms */ - -/* error callback flags */ -#define I2CECB_RX_ERR 0x10 /* this is a receive error */ -#define I2CECB_RX_OV 0x02 /* receive overrun error */ -#define I2CECB_RX_MASK 0x0f /* mask for error bits */ -#define I2CECB_TX_ERR 0x20 /* this is a transmit error */ -#define I2CECB_TX_CL 0x01 /* transmit collision error */ -#define I2CECB_TX_UN 0x02 /* transmit underflow error */ -#define I2CECB_TX_NAK 0x04 /* transmit no ack error */ -#define I2CECB_TX_MASK 0x0f /* mask for error bits */ -#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */ - -#define ERROR_I2C_NONE 0 -#define ERROR_I2C_LENGTH 1 - -#define I2C_WRITE_BIT 0x00 -#define I2C_READ_BIT 0x01 - -#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */ - - -#define NUM_RX_BDS 4 -#define NUM_TX_BDS 4 -#define MAX_TX_SPACE 256 - -typedef struct I2C_BD { - unsigned short status; - unsigned short length; - unsigned char *addr; -} I2C_BD; - -#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */ - -#define BD_I2C_TX_CL 0x0001 /* collision error */ -#define BD_I2C_TX_UN 0x0002 /* underflow error */ -#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */ -#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL) - -#define BD_I2C_RX_ERR BD_SC_OV - -/* - * Returns the best value of I2BRG to meet desired clock speed of I2C with - * input parameters (clock speed, filter, and predivider value). - * It returns computer speed value and the difference between it and desired - * speed. - */ -static inline int -i2c_roundrate(int hz, int speed, int filter, int modval, - int *brgval, int *totspeed) -{ - int moddiv = 1 << (5 - (modval & 3)), brgdiv, div; - - debug("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n", - hz, speed, filter, modval); - - div = moddiv * speed; - brgdiv = (hz + div - 1) / div; - - debug("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv); - - *brgval = ((brgdiv + 1) / 2) - 3 - (2 * filter); - - if ((*brgval < 0) || (*brgval > 255)) { - debug("\t\trejected brgval=%d\n", *brgval); - return -1; - } - - brgdiv = 2 * (*brgval + 3 + (2 * filter)); - div = moddiv * brgdiv; - *totspeed = hz / div; - - debug("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed); - - return 0; -} - -/* - * Sets the I2C clock predivider and divider to meet required clock speed. - */ -static int i2c_setrate(int hz, int speed) -{ - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; - int brgval, - modval, /* 0-3 */ - bestspeed_diff = speed, - bestspeed_brgval = 0, - bestspeed_modval = 0, - bestspeed_filter = 0, - totspeed, - filter = 0; /* Use this fixed value */ - - for (modval = 0; modval < 4; modval++) { - if (i2c_roundrate(hz, speed, filter, modval, &brgval, &totspeed) - == 0) { - int diff = speed - totspeed; - - if ((diff >= 0) && (diff < bestspeed_diff)) { - bestspeed_diff = diff; - bestspeed_modval = modval; - bestspeed_brgval = brgval; - bestspeed_filter = filter; - } - } - } - - debug("[I2C] Best is:\n"); - debug("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n", - hz, speed, bestspeed_filter, bestspeed_modval, bestspeed_brgval, - bestspeed_diff); - - i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | - (bestspeed_filter << 3); - i2c->i2c_i2brg = bestspeed_brgval & 0xff; - - debug("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod, - i2c->i2c_i2brg); - - return 1; -} - -void i2c_init(int speed, int slaveadd) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; - volatile iic_t *iip; - ulong rbase, tbase; - volatile I2C_BD *rxbd, *txbd; - uint dpaddr; - -#ifdef CONFIG_SYS_I2C_INIT_BOARD - /* - * call board specific i2c bus reset routine before accessing the - * environment, which might be in a chip on that bus. For details - * about this problem see doc/I2C_Edge_Conditions. - */ - i2c_init_board(); -#endif - - dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)]; - if (dpaddr == 0) { - /* need to allocate dual port ram */ - dpaddr = m8260_cpm_dpalloc(64 + - (NUM_RX_BDS * sizeof(I2C_BD)) + - (NUM_TX_BDS * sizeof(I2C_BD)) + - MAX_TX_SPACE, 64); - immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)] = - dpaddr; - } - - /* - * initialise data in dual port ram: - * - * dpaddr -> parameter ram (64 bytes) - * rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes) - * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes) - * tx buffer (MAX_TX_SPACE bytes) - */ - - iip = (iic_t *)&immap->im_dprambase[dpaddr]; - memset((void *)iip, 0, sizeof(iic_t)); - - rbase = dpaddr + 64; - tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD); - - /* Disable interrupts */ - i2c->i2c_i2mod = 0x00; - i2c->i2c_i2cmr = 0x00; - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2add = slaveadd; - - /* - * Set the I2C BRG Clock division factor from desired i2c rate - * and current CPU rate (we assume sccr dfbgr field is 0; - * divide BRGCLK by 1) - */ - debug("[I2C] Setting rate...\n"); - i2c_setrate(gd->arch.brg_clk, CONFIG_SYS_I2C_SPEED); - - /* Set I2C controller in master mode */ - i2c->i2c_i2com = 0x01; - - /* Initialize Tx/Rx parameters */ - iip->iic_rbase = rbase; - iip->iic_tbase = tbase; - rxbd = (I2C_BD *)((unsigned char *) &immap-> - im_dprambase[iip->iic_rbase]); - txbd = (I2C_BD *)((unsigned char *) &immap-> - im_dprambase[iip->iic_tbase]); - - debug("[I2C] rbase = %04x\n", iip->iic_rbase); - debug("[I2C] tbase = %04x\n", iip->iic_tbase); - debug("[I2C] rxbd = %08x\n", (int) rxbd); - debug("[I2C] txbd = %08x\n", (int) txbd); - - /* Set big endian byte order */ - iip->iic_tfcr = 0x10; - iip->iic_rfcr = 0x10; - - /* Set maximum receive size. */ - iip->iic_mrblr = I2C_RXTX_LEN; - - cp->cp_cpcr = mk_cr_cmd(CPM_CR_I2C_PAGE, - CPM_CR_I2C_SBLOCK, - 0x00, CPM_CR_INIT_TRX) | CPM_CR_FLG; - do { - __asm__ __volatile__("eieio"); - } while (cp->cp_cpcr & CPM_CR_FLG); - - /* Clear events and interrupts */ - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2cmr = 0x00; -} - -static -void i2c_newio(i2c_state_t *state) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile iic_t *iip; - uint dpaddr; - - debug("[I2C] i2c_newio\n"); - - dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)]; - iip = (iic_t *)&immap->im_dprambase[dpaddr]; - state->rx_idx = 0; - state->tx_idx = 0; - state->rxbd = (void *)&immap->im_dprambase[iip->iic_rbase]; - state->txbd = (void *)&immap->im_dprambase[iip->iic_tbase]; - state->tx_space = MAX_TX_SPACE; - state->tx_buf = (uchar *)state->txbd + NUM_TX_BDS * sizeof(I2C_BD); - state->err_cb = NULL; - state->cb_data = NULL; - - debug("[I2C] rxbd = %08x\n", (int)state->rxbd); - debug("[I2C] txbd = %08x\n", (int)state->txbd); - debug("[I2C] tx_buf = %08x\n", (int)state->tx_buf); - - /* clear the buffer memory */ - memset((char *) state->tx_buf, 0, MAX_TX_SPACE); -} - -static -int i2c_send(i2c_state_t *state, - unsigned char address, - unsigned char secondary_address, - unsigned int flags, unsigned short size, unsigned char *dataout) -{ - volatile I2C_BD *txbd; - int i, j; - - debug("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n", - address, secondary_address, flags, size); - - /* trying to send message larger than BD */ - if (size > I2C_RXTX_LEN) - return I2CERR_MSG_TOO_LONG; - - /* no more free bds */ - if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size)) - return I2CERR_NO_BUFFERS; - - txbd = (I2C_BD *)state->txbd; - txbd->addr = state->tx_buf; - - debug("[I2C] txbd = %08x\n", (int) txbd); - - if (flags & I2CF_START_COND) { - debug("[I2C] Formatting addresses...\n"); - if (flags & I2CF_ENABLE_SECONDARY) { - /* Length of message plus dest addresses */ - txbd->length = size + 2; - txbd->addr[0] = address << 1; - txbd->addr[1] = secondary_address; - i = 2; - } else { - /* Length of message plus dest address */ - txbd->length = size + 1; - /* Write destination address to BD */ - txbd->addr[0] = address << 1; - i = 1; - } - } else { - txbd->length = size; /* Length of message */ - i = 0; - } - - /* set up txbd */ - txbd->status = BD_SC_READY; - if (flags & I2CF_START_COND) - txbd->status |= BD_I2C_TX_START; - if (flags & I2CF_STOP_COND) - txbd->status |= BD_SC_LAST | BD_SC_WRAP; - - /* Copy data to send into buffer */ - debug("[I2C] copy data...\n"); - for (j = 0; j < size; i++, j++) - txbd->addr[i] = dataout[j]; - - debug("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - txbd->length, txbd->status, txbd->addr[0], txbd->addr[1]); - - /* advance state */ - state->tx_buf += txbd->length; - state->tx_space -= txbd->length; - state->tx_idx++; - state->txbd = (void *) (txbd + 1); - - return 0; -} - -static -int i2c_receive(i2c_state_t *state, - unsigned char address, - unsigned char secondary_address, - unsigned int flags, - unsigned short size_to_expect, unsigned char *datain) -{ - volatile I2C_BD *rxbd, *txbd; - - debug("[I2C] i2c_receive %02d %02d %02d\n", address, - secondary_address, flags); - - /* Expected to receive too much */ - if (size_to_expect > I2C_RXTX_LEN) - return I2CERR_MSG_TOO_LONG; - - /* no more free bds */ - if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS - || state->tx_space < 2) - return I2CERR_NO_BUFFERS; - - rxbd = (I2C_BD *) state->rxbd; - txbd = (I2C_BD *) state->txbd; - - debug("[I2C] rxbd = %08x\n", (int) rxbd); - debug("[I2C] txbd = %08x\n", (int) txbd); - - txbd->addr = state->tx_buf; - - /* set up TXBD for destination address */ - if (flags & I2CF_ENABLE_SECONDARY) { - txbd->length = 2; - txbd->addr[0] = address << 1; /* Write data */ - txbd->addr[1] = secondary_address; /* Internal address */ - txbd->status = BD_SC_READY; - } else { - txbd->length = 1 + size_to_expect; - txbd->addr[0] = (address << 1) | 0x01; - txbd->status = BD_SC_READY; - memset(&txbd->addr[1], 0, txbd->length); - } - - /* set up rxbd for reception */ - rxbd->status = BD_SC_EMPTY; - rxbd->length = size_to_expect; - rxbd->addr = datain; - - txbd->status |= BD_I2C_TX_START; - if (flags & I2CF_STOP_COND) { - txbd->status |= BD_SC_LAST | BD_SC_WRAP; - rxbd->status |= BD_SC_WRAP; - } - - debug("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - txbd->length, txbd->status, txbd->addr[0], txbd->addr[1]); - debug("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - rxbd->length, rxbd->status, rxbd->addr[0], rxbd->addr[1]); - - /* advance state */ - state->tx_buf += txbd->length; - state->tx_space -= txbd->length; - state->tx_idx++; - state->txbd = (void *) (txbd + 1); - state->rx_idx++; - state->rxbd = (void *) (rxbd + 1); - - return 0; -} - - -static -int i2c_doio(i2c_state_t *state) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile iic_t *iip; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; - volatile I2C_BD *txbd, *rxbd; - int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0; - uint dpaddr; - - debug("[I2C] i2c_doio\n"); - - if (state->tx_idx <= 0 && state->rx_idx <= 0) { - debug("[I2C] No I/O is queued\n"); - return I2CERR_QUEUE_EMPTY; - } - - dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)]; - iip = (iic_t *)&immap->im_dprambase[dpaddr]; - iip->iic_rbptr = iip->iic_rbase; - iip->iic_tbptr = iip->iic_tbase; - - /* Enable I2C */ - debug("[I2C] Enabling I2C...\n"); - i2c->i2c_i2mod |= 0x01; - - /* Begin transmission */ - i2c->i2c_i2com |= 0x80; - - /* Loop until transmit & receive completed */ - - n = state->tx_idx; - - if (n > 0) { - - txbd = ((I2C_BD *) state->txbd) - n; - for (i = 0; i < n; i++) { - txtimeo += TOUT_LOOP * txbd->length; - txbd++; - } - - txbd--; /* wait until last in list is done */ - - debug("[I2C] Transmitting...(txbd=0x%08lx)\n", - (ulong) txbd); - - udelay(START_DELAY_US); /* give it time to start */ - while ((txbd->status & BD_SC_READY) && (++txcnt < txtimeo)) { - udelay(DELAY_US); - if (ctrlc()) - return -1; - __asm__ __volatile__("eieio"); - } - } - - n = state->rx_idx; - - if (txcnt < txtimeo && n > 0) { - - rxbd = ((I2C_BD *) state->rxbd) - n; - for (i = 0; i < n; i++) { - rxtimeo += TOUT_LOOP * rxbd->length; - rxbd++; - } - - rxbd--; /* wait until last in list is done */ - - debug("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong) rxbd); - - udelay(START_DELAY_US); /* give it time to start */ - while ((rxbd->status & BD_SC_EMPTY) && (++rxcnt < rxtimeo)) { - udelay(DELAY_US); - if (ctrlc()) - return -1; - __asm__ __volatile__("eieio"); - } - } - - /* Turn off I2C */ - i2c->i2c_i2mod &= ~0x01; - - n = state->tx_idx; - - if (n > 0) { - for (i = 0; i < n; i++) { - txbd = ((I2C_BD *) state->txbd) - (n - i); - b = txbd->status & BD_I2C_TX_ERR; - if (b != 0) { - if (state->err_cb != NULL) - (*state->err_cb) (I2CECB_TX_ERR | b, - i, state->cb_data); - if (rc == 0) - rc = I2CERR_IO_ERROR; - } - } - } - - n = state->rx_idx; - - if (n > 0) { - for (i = 0; i < n; i++) { - rxbd = ((I2C_BD *) state->rxbd) - (n - i); - b = rxbd->status & BD_I2C_RX_ERR; - if (b != 0) { - if (state->err_cb != NULL) - (*state->err_cb) (I2CECB_RX_ERR | b, - i, state->cb_data); - if (rc == 0) - rc = I2CERR_IO_ERROR; - } - } - } - - if ((txtimeo > 0 && txcnt >= txtimeo) || - (rxtimeo > 0 && rxcnt >= rxtimeo)) { - if (state->err_cb != NULL) - (*state->err_cb) (I2CECB_TIMEOUT, -1, state->cb_data); - if (rc == 0) - rc = I2CERR_TIMEOUT; - } - - return rc; -} - -static void i2c_probe_callback(int flags, int xnum, void *data) -{ - /* - * the only acceptable errors are a transmit NAK or a receive - * overrun - tx NAK means the device does not exist, rx OV - * means the device must have responded to the slave address - * even though the transfer failed - */ - if (flags == (I2CECB_TX_ERR | I2CECB_TX_NAK)) - *(int *) data |= 1; - if (flags == (I2CECB_RX_ERR | I2CECB_RX_OV)) - *(int *) data |= 2; -} - -int i2c_probe(uchar chip) -{ - i2c_state_t state; - int rc, err_flag; - uchar buf[1]; - - i2c_newio(&state); - - state.err_cb = i2c_probe_callback; - state.cb_data = (void *) &err_flag; - err_flag = 0; - - rc = i2c_receive(&state, chip, 0, I2CF_START_COND | I2CF_STOP_COND, 1, - buf); - - if (rc != 0) - return rc; /* probe failed */ - - rc = i2c_doio(&state); - - if (rc == 0) - return 0; /* device exists - read succeeded */ - - if (rc == I2CERR_TIMEOUT) - return -1; /* device does not exist - timeout */ - - if (rc != I2CERR_IO_ERROR || err_flag == 0) - return rc; /* probe failed */ - - if (err_flag & 1) - return -1; /* device does not exist - had transmit NAK */ - - return 0; /* device exists - had receive overrun */ -} - - -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - i2c_state_t state; - uchar xaddr[4]; - int rc; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address - * and the extra bits end up in the "chip address" bit slots. - * This makes a 24WC08 (1Kbyte) chip look like four 256 byte - * chips. - * - * Note that we consider the length of the address field to still - * be one byte because the extra address bits are hidden in the - * chip address. - */ - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - - i2c_newio(&state); - - rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, - &xaddr[4 - alen]); - if (rc != 0) { - printf("i2c_read: i2c_send failed (%d)\n", rc); - return 1; - } - - rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer); - if (rc != 0) { - printf("i2c_read: i2c_receive failed (%d)\n", rc); - return 1; - } - - rc = i2c_doio(&state); - if (rc != 0) { - printf("i2c_read: i2c_doio failed (%d)\n", rc); - return 1; - } - return 0; -} - -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - i2c_state_t state; - uchar xaddr[4]; - int rc; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address - * and the extra bits end up in the "chip address" bit slots. - * This makes a 24WC08 (1Kbyte) chip look like four 256 byte - * chips. - * - * Note that we consider the length of the address field to still - * be one byte because the extra address bits are hidden in the - * chip address. - */ - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - - i2c_newio(&state); - - rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, - &xaddr[4 - alen]); - if (rc != 0) { - printf("i2c_write: first i2c_send failed (%d)\n", rc); - return 1; - } - - rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer); - if (rc != 0) { - printf("i2c_write: second i2c_send failed (%d)\n", rc); - return 1; - } - - rc = i2c_doio(&state); - if (rc != 0) { - printf("i2c_write: i2c_doio failed (%d)\n", rc); - return 1; - } - return 0; -} - -#if defined(CONFIG_I2C_MULTI_BUS) -/* - * Functions for multiple I2C bus handling - */ -unsigned int i2c_get_bus_num(void) -{ - return i2c_bus_num; -} - -int i2c_set_bus_num(unsigned int bus) -{ - if (bus >= CONFIG_SYS_MAX_I2C_BUS) - return -1; - i2c_bus_num = bus; - return 0; -} - -#endif /* CONFIG_I2C_MULTI_BUS */ -#endif /* CONFIG_HARD_I2C */ diff --git a/arch/powerpc/cpu/mpc8xx/Makefile b/arch/powerpc/cpu/mpc8xx/Makefile index 6f81fee..fc91a05 100644 --- a/arch/powerpc/cpu/mpc8xx/Makefile +++ b/arch/powerpc/cpu/mpc8xx/Makefile @@ -14,7 +14,6 @@ obj-y += cpu.o obj-y += cpu_init.o obj-y += fec.o obj-$(CONFIG_OF_LIBFDT) += fdt.o -obj-y += i2c.o obj-y += interrupts.o obj-y += scc.o obj-y += serial.o diff --git a/arch/powerpc/cpu/mpc8xx/i2c.c b/arch/powerpc/cpu/mpc8xx/i2c.c deleted file mode 100644 index 54d5cb5..0000000 --- a/arch/powerpc/cpu/mpc8xx/i2c.c +++ /dev/null @@ -1,672 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * - * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Back ported to the 8xx platform (from the 8260 platform) by - * Murray.Jensen@cmst.csiro.au, 27-Jan-01. - */ - -#include <common.h> -#include <console.h> - -#ifdef CONFIG_HARD_I2C - -#include <commproc.h> -#include <i2c.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */ -#define TOUT_LOOP 1000000 - -#define NUM_RX_BDS 4 -#define NUM_TX_BDS 4 -#define MAX_TX_SPACE 256 -#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */ - -typedef struct I2C_BD { - unsigned short status; - unsigned short length; - unsigned char *addr; -} I2C_BD; - -#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */ - -#define BD_I2C_TX_CL 0x0001 /* collision error */ -#define BD_I2C_TX_UN 0x0002 /* underflow error */ -#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */ -#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL) - -#define BD_I2C_RX_ERR BD_SC_OV - -typedef void (*i2c_ecb_t) (int, int); /* error callback function */ - -/* This structure keeps track of the bd and buffer space usage. */ -typedef struct i2c_state { - int rx_idx; /* index to next free Rx BD */ - int tx_idx; /* index to next free Tx BD */ - void *rxbd; /* pointer to next free Rx BD */ - void *txbd; /* pointer to next free Tx BD */ - int tx_space; /* number of Tx bytes left */ - unsigned char *tx_buf; /* pointer to free Tx area */ - i2c_ecb_t err_cb; /* error callback function */ -} i2c_state_t; - - -/* flags for i2c_send() and i2c_receive() */ -#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */ -#define I2CF_START_COND 0x02 /* tx: generate start condition */ -#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */ - -/* return codes */ -#define I2CERR_NO_BUFFERS 0x01 /* no more BDs or buffer space */ -#define I2CERR_MSG_TOO_LONG 0x02 /* tried to send/receive to much data */ -#define I2CERR_TIMEOUT 0x03 /* timeout in i2c_doio() */ -#define I2CERR_QUEUE_EMPTY 0x04 /* i2c_doio called without send/receive */ - -/* error callback flags */ -#define I2CECB_RX_ERR 0x10 /* this is a receive error */ -#define I2CECB_RX_ERR_OV 0x02 /* receive overrun error */ -#define I2CECB_RX_MASK 0x0f /* mask for error bits */ -#define I2CECB_TX_ERR 0x20 /* this is a transmit error */ -#define I2CECB_TX_CL 0x01 /* transmit collision error */ -#define I2CECB_TX_UN 0x02 /* transmit underflow error */ -#define I2CECB_TX_NAK 0x04 /* transmit no ack error */ -#define I2CECB_TX_MASK 0x0f /* mask for error bits */ -#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */ - -/* - * Returns the best value of I2BRG to meet desired clock speed of I2C with - * input parameters (clock speed, filter, and predivider value). - * It returns computer speed value and the difference between it and desired - * speed. - */ -static inline int -i2c_roundrate(int hz, int speed, int filter, int modval, - int *brgval, int *totspeed) -{ - int moddiv = 1 << (5 - (modval & 3)), brgdiv, div; - - debug("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n", - hz, speed, filter, modval); - - div = moddiv * speed; - brgdiv = (hz + div - 1) / div; - - debug("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv); - - *brgval = ((brgdiv + 1) / 2) - 3 - (2 * filter); - - if ((*brgval < 0) || (*brgval > 255)) { - debug("\t\trejected brgval=%d\n", *brgval); - return -1; - } - - brgdiv = 2 * (*brgval + 3 + (2 * filter)); - div = moddiv * brgdiv; - *totspeed = hz / div; - - debug("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed); - - return 0; -} - -/* - * Sets the I2C clock predivider and divider to meet required clock speed. - */ -static int i2c_setrate(int hz, int speed) -{ - immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile i2c8xx_t *i2c = (i2c8xx_t *) & immap->im_i2c; - int brgval, - modval, /* 0-3 */ - bestspeed_diff = speed, - bestspeed_brgval = 0, - bestspeed_modval = 0, - bestspeed_filter = 0, - totspeed, - filter = 0; /* Use this fixed value */ - - for (modval = 0; modval < 4; modval++) { - if (i2c_roundrate - (hz, speed, filter, modval, &brgval, &totspeed) == 0) { - int diff = speed - totspeed; - - if ((diff >= 0) && (diff < bestspeed_diff)) { - bestspeed_diff = diff; - bestspeed_modval = modval; - bestspeed_brgval = brgval; - bestspeed_filter = filter; - } - } - } - - debug("[I2C] Best is:\n"); - debug("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n", - hz, - speed, - bestspeed_filter, - bestspeed_modval, - bestspeed_brgval, - bestspeed_diff); - - i2c->i2c_i2mod |= - ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3); - i2c->i2c_i2brg = bestspeed_brgval & 0xff; - - debug("[I2C] i2mod=%08x i2brg=%08x\n", - i2c->i2c_i2mod, - i2c->i2c_i2brg); - - return 1; -} - -void i2c_init(int speed, int slaveaddr) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm; - volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c; - volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - ulong rbase, tbase; - volatile I2C_BD *rxbd, *txbd; - uint dpaddr; - -#ifdef CONFIG_SYS_I2C_INIT_BOARD - /* call board specific i2c bus reset routine before accessing the */ - /* environment, which might be in a chip on that bus. For details */ - /* about this problem see doc/I2C_Edge_Conditions. */ - i2c_init_board(); -#endif - -#ifdef CONFIG_SYS_I2C_UCODE_PATCH - iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase]; -#else - /* Disable relocation */ - iip->iic_rpbase = 0; -#endif - - dpaddr = CPM_I2C_BASE; - - /* - * initialise data in dual port ram: - * - * dpaddr->rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes) - * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes) - * tx buffer (MAX_TX_SPACE bytes) - */ - - rbase = dpaddr; - tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD); - - /* Initialize Port B I2C pins. */ - cp->cp_pbpar |= 0x00000030; - cp->cp_pbdir |= 0x00000030; - cp->cp_pbodr |= 0x00000030; - - /* Disable interrupts */ - i2c->i2c_i2mod = 0x00; - i2c->i2c_i2cmr = 0x00; - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2add = slaveaddr; - - /* - * Set the I2C BRG Clock division factor from desired i2c rate - * and current CPU rate (we assume sccr dfbgr field is 0; - * divide BRGCLK by 1) - */ - debug("[I2C] Setting rate...\n"); - i2c_setrate(gd->cpu_clk, CONFIG_SYS_I2C_SPEED); - - /* Set I2C controller in master mode */ - i2c->i2c_i2com = 0x01; - - /* Set SDMA bus arbitration level to 5 (SDCR) */ - immap->im_siu_conf.sc_sdcr = 0x0001; - - /* Initialize Tx/Rx parameters */ - iip->iic_rbase = rbase; - iip->iic_tbase = tbase; - rxbd = (I2C_BD *) ((unsigned char *) &cp->cp_dpmem[iip->iic_rbase]); - txbd = (I2C_BD *) ((unsigned char *) &cp->cp_dpmem[iip->iic_tbase]); - - debug("[I2C] rbase = %04x\n", iip->iic_rbase); - debug("[I2C] tbase = %04x\n", iip->iic_tbase); - debug("[I2C] rxbd = %08x\n", (int)rxbd); - debug("[I2C] txbd = %08x\n", (int)txbd); - - /* Set big endian byte order */ - iip->iic_tfcr = 0x10; - iip->iic_rfcr = 0x10; - - /* Set maximum receive size. */ - iip->iic_mrblr = I2C_RXTX_LEN; - -#ifdef CONFIG_SYS_I2C_UCODE_PATCH - /* - * Initialize required parameters if using microcode patch. - */ - iip->iic_rbptr = iip->iic_rbase; - iip->iic_tbptr = iip->iic_tbase; - iip->iic_rstate = 0; - iip->iic_tstate = 0; -#else - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG; - do { - __asm__ __volatile__("eieio"); - } while (cp->cp_cpcr & CPM_CR_FLG); -#endif - - /* Clear events and interrupts */ - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2cmr = 0x00; -} - -static void i2c_newio(i2c_state_t *state) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm; - volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - - debug("[I2C] i2c_newio\n"); - -#ifdef CONFIG_SYS_I2C_UCODE_PATCH - iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase]; -#endif - state->rx_idx = 0; - state->tx_idx = 0; - state->rxbd = (void *)&cp->cp_dpmem[iip->iic_rbase]; - state->txbd = (void *)&cp->cp_dpmem[iip->iic_tbase]; - state->tx_space = MAX_TX_SPACE; - state->tx_buf = (uchar *)state->txbd + NUM_TX_BDS * sizeof(I2C_BD); - state->err_cb = NULL; - - debug("[I2C] rxbd = %08x\n", (int)state->rxbd); - debug("[I2C] txbd = %08x\n", (int)state->txbd); - debug("[I2C] tx_buf = %08x\n", (int)state->tx_buf); - - /* clear the buffer memory */ - memset((char *)state->tx_buf, 0, MAX_TX_SPACE); -} - -static int -i2c_send(i2c_state_t *state, - unsigned char address, - unsigned char secondary_address, - unsigned int flags, unsigned short size, unsigned char *dataout) -{ - volatile I2C_BD *txbd; - int i, j; - - debug("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n", - address, secondary_address, flags, size); - - /* trying to send message larger than BD */ - if (size > I2C_RXTX_LEN) - return I2CERR_MSG_TOO_LONG; - - /* no more free bds */ - if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size)) - return I2CERR_NO_BUFFERS; - - txbd = (I2C_BD *) state->txbd; - txbd->addr = state->tx_buf; - - debug("[I2C] txbd = %08x\n", (int)txbd); - - if (flags & I2CF_START_COND) { - debug("[I2C] Formatting addresses...\n"); - if (flags & I2CF_ENABLE_SECONDARY) { - /* Length of msg + dest addr */ - txbd->length = size + 2; - - txbd->addr[0] = address << 1; - txbd->addr[1] = secondary_address; - i = 2; - } else { - /* Length of msg + dest addr */ - txbd->length = size + 1; - /* Write dest addr to BD */ - txbd->addr[0] = address << 1; - i = 1; - } - } else { - txbd->length = size; /* Length of message */ - i = 0; - } - - /* set up txbd */ - txbd->status = BD_SC_READY; - if (flags & I2CF_START_COND) - txbd->status |= BD_I2C_TX_START; - if (flags & I2CF_STOP_COND) - txbd->status |= BD_SC_LAST | BD_SC_WRAP; - - /* Copy data to send into buffer */ - debug("[I2C] copy data...\n"); - for(j = 0; j < size; i++, j++) - txbd->addr[i] = dataout[j]; - - debug("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - txbd->length, - txbd->status, - txbd->addr[0], - txbd->addr[1]); - - /* advance state */ - state->tx_buf += txbd->length; - state->tx_space -= txbd->length; - state->tx_idx++; - state->txbd = (void *) (txbd + 1); - - return 0; -} - -static int -i2c_receive(i2c_state_t *state, - unsigned char address, - unsigned char secondary_address, - unsigned int flags, - unsigned short size_to_expect, unsigned char *datain) -{ - volatile I2C_BD *rxbd, *txbd; - - debug("[I2C] i2c_receive %02d %02d %02d\n", - address, secondary_address, flags); - - /* Expected to receive too much */ - if (size_to_expect > I2C_RXTX_LEN) - return I2CERR_MSG_TOO_LONG; - - /* no more free bds */ - if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS - || state->tx_space < 2) - return I2CERR_NO_BUFFERS; - - rxbd = (I2C_BD *) state->rxbd; - txbd = (I2C_BD *) state->txbd; - - debug("[I2C] rxbd = %08x\n", (int)rxbd); - debug("[I2C] txbd = %08x\n", (int)txbd); - - txbd->addr = state->tx_buf; - - /* set up TXBD for destination address */ - if (flags & I2CF_ENABLE_SECONDARY) { - txbd->length = 2; - txbd->addr[0] = address << 1; /* Write data */ - txbd->addr[1] = secondary_address; /* Internal address */ - txbd->status = BD_SC_READY; - } else { - txbd->length = 1 + size_to_expect; - txbd->addr[0] = (address << 1) | 0x01; - txbd->status = BD_SC_READY; - memset(&txbd->addr[1], 0, txbd->length); - } - - /* set up rxbd for reception */ - rxbd->status = BD_SC_EMPTY; - rxbd->length = size_to_expect; - rxbd->addr = datain; - - txbd->status |= BD_I2C_TX_START; - if (flags & I2CF_STOP_COND) { - txbd->status |= BD_SC_LAST | BD_SC_WRAP; - rxbd->status |= BD_SC_WRAP; - } - - debug("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - txbd->length, - txbd->status, - txbd->addr[0], - txbd->addr[1]); - debug("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - rxbd->length, - rxbd->status, - rxbd->addr[0], - rxbd->addr[1]); - - /* advance state */ - state->tx_buf += txbd->length; - state->tx_space -= txbd->length; - state->tx_idx++; - state->txbd = (void *) (txbd + 1); - state->rx_idx++; - state->rxbd = (void *) (rxbd + 1); - - return 0; -} - - -static int i2c_doio(i2c_state_t *state) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm; - volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c; - volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - volatile I2C_BD *txbd, *rxbd; - volatile int j = 0; - - debug("[I2C] i2c_doio\n"); - -#ifdef CONFIG_SYS_I2C_UCODE_PATCH - iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase]; -#endif - - if (state->tx_idx <= 0 && state->rx_idx <= 0) { - debug("[I2C] No I/O is queued\n"); - return I2CERR_QUEUE_EMPTY; - } - - iip->iic_rbptr = iip->iic_rbase; - iip->iic_tbptr = iip->iic_tbase; - - /* Enable I2C */ - debug("[I2C] Enabling I2C...\n"); - i2c->i2c_i2mod |= 0x01; - - /* Begin transmission */ - i2c->i2c_i2com |= 0x80; - - /* Loop until transmit & receive completed */ - - if (state->tx_idx > 0) { - txbd = ((I2C_BD*)state->txbd) - 1; - - debug("[I2C] Transmitting...(txbd=0x%08lx)\n", - (ulong)txbd); - - while ((txbd->status & BD_SC_READY) && (j++ < TOUT_LOOP)) { - if (ctrlc()) - return (-1); - - __asm__ __volatile__("eieio"); - } - } - - if ((state->rx_idx > 0) && (j < TOUT_LOOP)) { - rxbd = ((I2C_BD*)state->rxbd) - 1; - - debug("[I2C] Receiving...(rxbd=0x%08lx)\n", - (ulong)rxbd); - - while ((rxbd->status & BD_SC_EMPTY) && (j++ < TOUT_LOOP)) { - if (ctrlc()) - return (-1); - - __asm__ __volatile__("eieio"); - } - } - - /* Turn off I2C */ - i2c->i2c_i2mod &= ~0x01; - - if (state->err_cb != NULL) { - int n, i, b; - - /* - * if we have an error callback function, look at the - * error bits in the bd status and pass them back - */ - - if ((n = state->tx_idx) > 0) { - for (i = 0; i < n; i++) { - txbd = ((I2C_BD *) state->txbd) - (n - i); - if ((b = txbd->status & BD_I2C_TX_ERR) != 0) - (*state->err_cb) (I2CECB_TX_ERR | b, - i); - } - } - - if ((n = state->rx_idx) > 0) { - for (i = 0; i < n; i++) { - rxbd = ((I2C_BD *) state->rxbd) - (n - i); - if ((b = rxbd->status & BD_I2C_RX_ERR) != 0) - (*state->err_cb) (I2CECB_RX_ERR | b, - i); - } - } - - if (j >= TOUT_LOOP) - (*state->err_cb) (I2CECB_TIMEOUT, 0); - } - - return (j >= TOUT_LOOP) ? I2CERR_TIMEOUT : 0; -} - -static int had_tx_nak; - -static void i2c_test_callback(int flags, int xnum) -{ - if ((flags & I2CECB_TX_ERR) && (flags & I2CECB_TX_NAK)) - had_tx_nak = 1; -} - -int i2c_probe(uchar chip) -{ - i2c_state_t state; - int rc; - uchar buf[1]; - - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - i2c_newio(&state); - - state.err_cb = i2c_test_callback; - had_tx_nak = 0; - - rc = i2c_receive(&state, chip, 0, I2CF_START_COND | I2CF_STOP_COND, 1, - buf); - - if (rc != 0) - return (rc); - - rc = i2c_doio(&state); - - if ((rc != 0) && (rc != I2CERR_TIMEOUT)) - return (rc); - - return (had_tx_nak); -} - -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - i2c_state_t state; - uchar xaddr[4]; - int rc; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones like - * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the - * extra bits end up in the "chip address" bit slots. This makes - * a 24WC08 (1Kbyte) chip look like four 256 byte chips. - * - * Note that we consider the length of the address field to still - * be one byte because the extra address bits are hidden in the - * chip address. - */ - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - - i2c_newio(&state); - - rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, - &xaddr[4 - alen]); - if (rc != 0) { - printf("i2c_read: i2c_send failed (%d)\n", rc); - return 1; - } - - rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer); - if (rc != 0) { - printf("i2c_read: i2c_receive failed (%d)\n", rc); - return 1; - } - - rc = i2c_doio(&state); - if (rc != 0) { - printf("i2c_read: i2c_doio failed (%d)\n", rc); - return 1; - } - return 0; -} - -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - i2c_state_t state; - uchar xaddr[4]; - int rc; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones like - * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the - * extra bits end up in the "chip address" bit slots. This makes - * a 24WC08 (1Kbyte) chip look like four 256 byte chips. - * - * Note that we consider the length of the address field to still - * be one byte because the extra address bits are hidden in the - * chip address. - */ - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - - i2c_newio(&state); - - rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, - &xaddr[4 - alen]); - if (rc != 0) { - printf("i2c_write: first i2c_send failed (%d)\n", rc); - return 1; - } - - rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer); - if (rc != 0) { - printf("i2c_write: second i2c_send failed (%d)\n", rc); - return 1; - } - - rc = i2c_doio(&state); - if (rc != 0) { - printf("i2c_write: i2c_doio failed (%d)\n", rc); - return 1; - } - return 0; -} - -#endif /* CONFIG_HARD_I2C */ |