diff options
author | Stefan Roese <sr@denx.de> | 2014-10-22 10:13:11 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-10-23 13:59:21 (GMT) |
commit | d5c5132f878394b7487d3f6da0d469aa72737318 (patch) | |
tree | 6e0879ddf2c632f0ed23cdbd6250bcf65f75b423 /board/Seagate/dockstar/dockstar.c | |
parent | 4aceea2088e04724900a9c6f22c48d99293206f2 (diff) | |
download | u-boot-d5c5132f878394b7487d3f6da0d469aa72737318.tar.xz |
arm: marvell: Extract kirkwood gpio functions into new common file gpio.c
This makes is possible to use those gpio functions from other MVEBU SoC's as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Diffstat (limited to 'board/Seagate/dockstar/dockstar.c')
-rw-r--r-- | board/Seagate/dockstar/dockstar.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c index dc73dfa..838f578 100644 --- a/board/Seagate/dockstar/dockstar.c +++ b/board/Seagate/dockstar/dockstar.c @@ -26,9 +26,9 @@ int board_early_init_f(void) * There are maximum 64 gpios controlled through 2 sets of registers * the below configuration configures mainly initial LED status */ - kw_config_gpio(DOCKSTAR_OE_VAL_LOW, - DOCKSTAR_OE_VAL_HIGH, - DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH); + mvebu_config_gpio(DOCKSTAR_OE_VAL_LOW, + DOCKSTAR_OE_VAL_HIGH, + DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ static const u32 kwmpp_config[] = { @@ -143,7 +143,7 @@ void reset_phy(void) static void set_leds(u32 leds, u32 blinking) { - struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE; + struct kwgpio_registers *r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE; u32 oe = readl(&r->oe) | BOTH_LEDS; writel(oe & ~leds, &r->oe); /* active low */ u32 bl = readl(&r->blink_en) & ~BOTH_LEDS; |