diff options
author | Stefan Roese <sr@denx.de> | 2009-05-11 11:46:14 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2009-06-12 18:39:47 (GMT) |
commit | d873133f2ba9bd613d5f6552c31cc70fb13f15d3 (patch) | |
tree | 01a00655040050e5125ef15a24e01e605eb02ec6 /board/amcc/sequoia/init.S | |
parent | 837db3d87f4bfe9261629fb4a1bb433506a3056a (diff) | |
download | u-boot-d873133f2ba9bd613d5f6552c31cc70fb13f15d3.tar.xz |
ppc4xx: Add Sequoia RAM-booting target
This patch adds another build target for the AMCC Sequoia PPC440EPx
eval board. This RAM-booting version is targeted for boards without
NOR FLASH (NAND booting) which need a possibility to initially
program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000)
configured to setup the SDRAM, this debugger can load this RAM-
booting image to the target address in SDRAM (in this case 0x1000000)
and start it there. Then U-Boot's standard NAND commands can be
used to program the NAND FLASH (e.g. "nand write ...").
Here the commands to load and start this image from the BDI2000:
440EPX>reset halt
440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin
440EPX>go 0x1000000
Please note that this image automatically scans for an already
initialized SDRAM TLB (detected by EPN=0). This TLB will not be
cleared. This TLB doesn't need to be TLB #0, this RAM-booting
version will detect it and preserve it. So booting via BDI2000
will work and booting with a complete different TLB init via
U-Boot works as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/amcc/sequoia/init.S')
-rw-r--r-- | board/amcc/sequoia/init.S | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index 4452d26..3c0e400 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -43,12 +43,19 @@ tlbtab: /* vxWorks needs this as first entry for the Machine Check interrupt */ tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + /* + * The RAM-boot version skips the SDRAM TLB (identified by EPN=0). This + * entry is already configured for SDRAM via the JTAG debugger and mustn't + * be re-initialized by this RAM-booting U-Boot version. + */ +#ifndef CONFIG_SYS_RAMBOOT /* TLB-entry for DDR SDRAM (Up to 2GB) */ #ifdef CONFIG_4xx_DCACHE tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G) #else tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) #endif +#endif /* CONFIG_SYS_RAMBOOT */ /* TLB-entry for EBC */ tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) |