diff options
author | Stefan Roese <sr@denx.de> | 2008-03-19 15:20:49 (GMT) |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2008-03-27 08:54:41 (GMT) |
commit | 4c9e855734c523900322a7c3cdd9099b4f51b51d (patch) | |
tree | 2701c888929cf2559477fd63c03eaf23648d81a9 /board/amcc | |
parent | d8bd643141af4710d7f1b69bbab6b760de0af0a1 (diff) | |
download | u-boot-4c9e855734c523900322a7c3cdd9099b4f51b51d.tar.xz |
ppc4xx: Add AMCC Glacier 406GT eval board support
This patch adds support for the AMCC Glacier 460GT eval board.
The main difference to the Canyonlands board are listed here:
- 4 ethernet ports instead of 2
- no SATA port
- no USB port
Currently EMAC2+3 are not working. This will be fixed in a later
release.
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/amcc')
-rw-r--r-- | board/amcc/canyonlands/canyonlands.c | 25 |
1 files changed, 16 insertions, 9 deletions
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 36779f5..fa3ae85 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -35,6 +35,7 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { u32 sdr0_cust0; + u32 pvr = get_pvr(); /*------------------------------------------------------------------+ * Setup the interrupt controller polarities, triggers, etc. @@ -105,14 +106,16 @@ int board_early_init_f(void) mtdcr(AHB_TOP, 0x8000004B); mtdcr(AHB_BOT, 0x8000004B); - /* - * Configure USB-STP pins as alternate and not GPIO - * It seems to be neccessary to configure the STP pins as GPIO - * input at powerup (perhaps while USB reset is asserted). So - * we configure those pins to their "real" function now. - */ - gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) { + /* + * Configure USB-STP pins as alternate and not GPIO + * It seems to be neccessary to configure the STP pins as GPIO + * input at powerup (perhaps while USB reset is asserted). So + * we configure those pins to their "real" function now. + */ + gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + } return 0; } @@ -369,6 +372,7 @@ int misc_init_r(void) { u32 sdr0_srst1 = 0; u32 eth_cfg; + u32 pvr = get_pvr(); /* * Set EMAC mode/configuration (GMII, SGMII, RGMII...). @@ -382,7 +386,10 @@ int misc_init_r(void) /* Set the for 2 RGMII mode */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL; - eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; + if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) + eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; + else + eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL; mtsdr(SDR0_ETH_CFG, eth_cfg); /* |