avr32: Retire AVR32 for good

AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

1 files changed, 0 insertions, 109 deletions

diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
deleted file mode 100644
index dacd427..0000000
--- a/board/atmel/atngw100/atngw100.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/sdram.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix.h>
-#include <asm/arch/mmu.h>
-#include <asm/arch/portmux.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
-	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
-					| MMU_VMR_CACHE_NONE,
-	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
-					| MMU_VMR_CACHE_WRBACK,
-	},
-};
-
-static const struct sdram_config sdram_config = {
-	.data_bits	= SDRAM_DATA_16BIT,
-	.row_bits	= 13,
-	.col_bits	= 9,
-	.bank_bits	= 2,
-	.cas		= 3,
-	.twr		= 2,
-	.trc		= 7,
-	.trp		= 2,
-	.trcd		= 2,
-	.tras		= 5,
-	.txsr		= 5,
-	/* 7.81 us */
-	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
-};
-
-int board_early_init_f(void)
-{
-	/* Enable SDRAM in the EBI mux */
-	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
-
-	portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
-	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
-
-	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
-
-#if defined(CONFIG_MACB)
-	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
-	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
-#endif
-#if defined(CONFIG_MMC)
-	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
-#endif
-#if defined(CONFIG_ATMEL_SPI)
-	portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW);
-#endif
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	gd->bd->bi_phy_id[0] = 0x01;
-	gd->bd->bi_phy_id[1] = 0x03;
-	return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bi)
-{
-	macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
-	macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]);
-	return 0;
-}
-#endif
-
-/* SPI chip select control */
-#ifdef CONFIG_ATMEL_SPI
-#include <spi.h>
-
-#define ATNGW100_DATAFLASH_CS_PIN	GPIO_PIN_PA(3)
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1);
-}
-#endif /* CONFIG_ATMEL_SPI */