board: sama5d3xek: Convert to CONFIG_DM_VIDEO

Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

1 files changed, 3 insertions, 80 deletions

diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 6d473fc..98d846f 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -13,9 +13,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <debug_uart.h>
-#include <lcd.h>
 #include <linux/ctype.h>
-#include <atmel_hlcdc.h>
 #include <phy.h>
 #include <micrel.h>
 #include <spl.h>
@@ -132,80 +130,6 @@ static void sama5d3xek_mci_hw_init(void)
 }
 #endif
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	.vl_col = 800,
-	.vl_row = 480,
-	.vl_clk = 24000000,
-	.vl_bpix = LCD_BPP,
-	.vl_tft = 1,
-	.vl_hsync_len = 128,
-	.vl_left_margin = 64,
-	.vl_right_margin = 64,
-	.vl_vsync_len = 2,
-	.vl_upper_margin = 22,
-	.vl_lower_margin = 21,
-	.mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-static void sama5d3xek_lcd_hw_init(void)
-{
-	gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
-
-	/* The higher 8 bit of LCD is board related */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD16 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0);	/* LCDD17 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD18 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD19 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD20 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD21 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0);	/* LCDD22 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0);	/* LCDD23 */
-
-	/* Configure lower 16 bit of LCD and enable clock */
-	at91_lcd_hw_init();
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
-	ulong dram_size;
-	uint64_t nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf("%s\n", U_BOOT_VERSION);
-	lcd_printf("(C) 2013 ATMEL Corp\n");
-	lcd_printf("at91@atmel.com\n");
-	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-		   strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-
-	nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
-#endif
-	lcd_printf("%ld MB SDRAM, %lld MB NAND\n",
-		   dram_size >> 20, nand_size >> 20);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
-
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 void board_debug_uart_init(void)
 {
@@ -240,10 +164,6 @@ int board_init(void)
 #ifdef CONFIG_GENERIC_ATMEL_MCI
 	sama5d3xek_mci_hw_init();
 #endif
-#ifdef CONFIG_LCD
-	if (has_lcdc())
-		sama5d3xek_lcd_hw_init();
-#endif
 	return 0;
 }
 
@@ -269,6 +189,9 @@ int board_late_init(void)
 	strcat(name, "ek.dtb");
 	env_set("dtb_name", name);
 #endif
+#ifdef CONFIG_DM_VIDEO
+	at91_video_show_board_info();
+#endif
 	return 0;
 }
 #endif