diff options
| author | wdenk <wdenk> | 2003-12-07 18:32:37 (GMT) |
|---|---|---|
| committer | wdenk <wdenk> | 2003-12-07 18:32:37 (GMT) |
| commit | a2663ea4fc9d18cb8000c97ed92c3c668eda8e04 (patch) | |
| tree | 9eb328b497d6f482e5571635fa00b1d0cae5b185 /board/dbau1x00 | |
| parent | ef5a9672c778e22ecb522db625b5df78ea40ed23 (diff) | |
| download | u-boot-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.tar.xz | |
* Patches by David Müller, 14 Nov 2003:
- board/mpl/common/common_util.c
* implement support for BZIP2 compressed images
* various cleanups (printf -> puts, ...)
- board/mpl/common/flash.c
* report correct errors to upper layers
* check the erase fail and VPP low bits in status reg
- board/mpl/vcma9/cmd_vcma9.c
- board/mpl/vcma9/flash.c
* various cleanups (printf -> puts, ...)
- common/cmd_usb.c
* fix typo in comment
- cpu/arm920t/usb_ohci.c
* support for S3C2410 is missing in #if line
- drivers/cs8900.c
* reinit some registers in case of error (cable missing, ...)
- fs/fat/fat.c
* support for USB/MMC devices is missing in #if line
- include/configs/MIP405.h
- include/configs/PIP405.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
- include/configs/VCMA9.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
* enable USB support
- lib_arm/armlinux.c
* change calling convention of ARM Linux kernel as
described on http://www.arm.linux.org.uk/developer/booting.php
* Patch by Thomas Lange, 14 Nov 2003:
Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
support all these AMD boards.
* Patch by Thomas Lange, 14 Nov 2003:
Workaround for mips au1x00 physical memory accesses (the au1x00
uses a 36 bit bus internally and cannot access physical memory
directly. Use the uncached SDRAM address instead of the physical
one.)
Diffstat (limited to 'board/dbau1x00')
| -rw-r--r-- | board/dbau1x00/dbau1x00.c | 29 |
1 files changed, 23 insertions, 6 deletions
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c index 3b6fcec..8fcbd81 100644 --- a/board/dbau1x00/dbau1x00.c +++ b/board/dbau1x00/dbau1x00.c @@ -39,6 +39,13 @@ long int initdram(int board_type) /* In cpu/mips/cpu.c */ void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ); +#ifdef CONFIG_DBAU1100 +#warning "FIXME Check that bcsr is the same as dbau1000 board!" +#endif +#ifdef CONFIG_DBAU1500 +#warning "FIXME Check that bcsr is the same as dbau1000 board!" +#endif + int checkboard (void) { u16 status; @@ -51,14 +58,24 @@ int checkboard (void) proc_id = read_32bit_cp0_register(CP0_PRID); - switch(proc_id>>24){ + switch (proc_id >> 24) { case 0: - puts("Board: Merlot (DbAu1000)\n"); - printf("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n", - (proc_id>>8)&0xFF,proc_id&0xFF); - break; + puts ("Board: Merlot (DbAu1000)\n"); + printf ("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n", + (proc_id >> 8) & 0xFF, proc_id & 0xFF); + break; + case 1: + puts ("Board: DbAu1500\n"); + printf ("CPU: Au1500, id: 0x%02x, rev: 0x%02x\n", + (proc_id >> 8) & 0xFF, proc_id & 0xFF); + break; + case 2: + puts ("Board: DbAu1100\n"); + printf ("CPU: Au1100, id: 0x%02x, rev: 0x%02x\n", + (proc_id >> 8) & 0xFF, proc_id & 0xFF); + break; default: - printf("Unsupported cpu %d, proc_id=0x%x\n",proc_id>>24,proc_id); + printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } #ifdef CONFIG_IDE_PCMCIA /* Enable 3.3 V on slot 0 ( VCC ) |