ARM: mxs: Rename M28EVK

The board is now manufactured by Aries Embedded GmbH , rename it.

Signed-off-by: Marek Vasut <marex@denx.de>

1 files changed, 0 insertions, 173 deletions

diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
deleted file mode 100644
index 33d38cf..0000000
--- a/board/denx/m28evk/m28evk.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * DENX M28 module
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
-	/* IO0 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK0, 480000);
-	/* IO1 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK1, 480000);
-
-	/* SSP0 clock at 96MHz */
-	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-	/* SSP2 clock at 160MHz */
-	mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
-
-#ifdef	CONFIG_CMD_USB
-	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
-	mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
-			MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
-	gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
-
-	mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
-			MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
-	gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
-#endif
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	return mxs_dram_init();
-}
-
-#ifdef	CONFIG_CMD_MMC
-static int m28_mmc_wp(int id)
-{
-	if (id != 0) {
-		printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
-		return 1;
-	}
-
-	return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	/* Configure WP as input. */
-	gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
-	/* Turn on the power to the card. */
-	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-
-	return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
-}
-#endif
-
-#ifdef	CONFIG_CMD_NET
-
-#define	MII_OPMODE_STRAP_OVERRIDE	0x16
-#define	MII_PHY_CTRL1			0x1e
-#define	MII_PHY_CTRL2			0x1f
-
-int fecmxc_mii_postcall(int phy)
-{
-#if	defined(CONFIG_DENX_M28_V11) || defined(CONFIG_DENX_M28_V10)
-	/* KZ8031 PHY on old boards. */
-	const uint32_t freq = 0x0080;
-#else
-	/* KZ8021 PHY on new boards. */
-	const uint32_t freq = 0x0000;
-#endif
-
-	miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
-	miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
-	if (phy == 3)
-		miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	struct mxs_clkctrl_regs *clkctrl_regs =
-		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-	struct eth_device *dev;
-	int ret;
-
-	ret = cpu_eth_init(bis);
-	if (ret)
-		return ret;
-
-	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
-		CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
-		CLKCTRL_ENET_TIME_SEL_RMII_CLK);
-
-#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
-	/* Reset the new PHY */
-	gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
-	udelay(10000);
-	gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
-	udelay(10000);
-#endif
-
-	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
-	if (ret) {
-		printf("FEC MXS: Unable to init FEC0\n");
-		return ret;
-	}
-
-	ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
-	if (ret) {
-		printf("FEC MXS: Unable to init FEC1\n");
-		return ret;
-	}
-
-	dev = eth_get_dev_by_name("FEC0");
-	if (!dev) {
-		printf("FEC MXS: Unable to get FEC0 device entry\n");
-		return -EINVAL;
-	}
-
-	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
-	if (ret) {
-		printf("FEC MXS: Unable to register FEC0 mii postcall\n");
-		return ret;
-	}
-
-	dev = eth_get_dev_by_name("FEC1");
-	if (!dev) {
-		printf("FEC MXS: Unable to get FEC1 device entry\n");
-		return -EINVAL;
-	}
-
-	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
-	if (ret) {
-		printf("FEC MXS: Unable to register FEC1 mii postcall\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-#endif