diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2014-02-21 00:55:16 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-03-10 15:38:13 (GMT) |
commit | ba650e9b5263bfc7579e6775676441eeeca2edc4 (patch) | |
tree | fe38a8aef9e8df147b16b3012c774e6b01dbd00a /board/freescale/m5271evb | |
parent | 247161b8160fc699b0a517f081220bb50bc502a8 (diff) | |
download | u-boot-ba650e9b5263bfc7579e6775676441eeeca2edc4.tar.xz |
m68k: Remove M5271EVB and idmr board support
CONFIG_SYS_HZ must be always 1000, but M5271EVB.h defines it
as 1000000 and idmr.h defines it as (50000000 / 64).
When compiling these two boards, a warning message is displayed:
time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000
and should not be defined by platforms" [-Wcpp]
There are no board maintainers for them so this commit just
deletes them.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Jason Jin <Jason.jin@freescale.com>
Diffstat (limited to 'board/freescale/m5271evb')
-rw-r--r-- | board/freescale/m5271evb/Makefile | 8 | ||||
-rw-r--r-- | board/freescale/m5271evb/config.mk | 9 | ||||
-rw-r--r-- | board/freescale/m5271evb/m5271evb.c | 115 | ||||
-rw-r--r-- | board/freescale/m5271evb/u-boot.lds | 85 |
4 files changed, 0 insertions, 217 deletions
diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile deleted file mode 100644 index 77138c6..0000000 --- a/board/freescale/m5271evb/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = m5271evb.o diff --git a/board/freescale/m5271evb/config.mk b/board/freescale/m5271evb/config.mk deleted file mode 100644 index 957f584..0000000 --- a/board/freescale/m5271evb/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c deleted file mode 100644 index 5981a27..0000000 --- a/board/freescale/m5271evb/m5271evb.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/immap.h> - -int checkboard (void) { - puts ("Board: Freescale M5271EVB\n"); - return 0; -}; - -phys_size_t initdram (int board_type) { - - int i; - - /* Enable Address lines 23-21 and lower 16bits of data path */ - mbar_writeByte(MCF_GPIO_PAR_AD, MCF_GPIO_AD_ADDR23 | - MCF_GPIO_AD_ADDR22 | MCF_GPIO_AD_ADDR21 | - MCF_GPIO_AD_DATAL); - - /* Set CS2 pin to be SD_CS0 */ - mbar_writeByte(MCF_GPIO_PAR_CS, mbar_readByte(MCF_GPIO_PAR_CS) - | MCF_GPIO_PAR_CS_PAR_CS2); - - /* Configure SDRAM Control Pin Assignemnt Register */ - mbar_writeByte(MCF_GPIO_PAR_SDRAM, MCF_GPIO_SDRAM_CSSDCS_00 | - MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS | - MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE | - MCF_GPIO_SDRAM_SDCS_11); - asm(" nop"); - - /* - * Check to see if the SDRAM has already been initialized - * by a run control tool - */ - if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) { - /* Initialize DRAM Control Register: DCR */ - mbar_writeShort(MCF_SDRAMC_DCR, - MCF_SDRAMC_DCR_RTIM(2) - | MCF_SDRAMC_DCR_RC(0x2E)); - asm(" nop"); - - /* - * Initialize DACR0 - * - * CASL: 01 - * CBM: cmd at A20, bank select bits 21 and up - * PS: 32bit port size - */ - mbar_writeLong(MCF_SDRAMC_DACR0, - MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) - | MCF_SDRAMC_DACRn_CASL(1) - | MCF_SDRAMC_DACRn_CBM(3) - | MCF_SDRAMC_DACRn_PS(0)); - asm(" nop"); - - /* Initialize DMR0 */ - mbar_writeLong(MCF_SDRAMC_DMR0, - MCF_SDRAMC_DMRn_BAM_16M - | MCF_SDRAMC_DMRn_V); - asm(" nop"); - - /* Set IP bit in DACR */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_IP); - asm(" nop"); - - /* Wait at least 20ns to allow banks to precharge */ - for (i = 0; i < 5; i++) - asm(" nop"); - - /* Write to this block to initiate precharge */ - *(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5; - asm(" nop"); - - /* Set RE bit in DACR */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_RE); - - /* Wait for at least 8 auto refresh cycles to occur */ - for (i = 0; i < 2000; i++) - asm(" nop"); - - /* Finish the configuration by issuing the MRS */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_MRS); - asm(" nop"); - - /* - * Write to the SDRAM Mode Register A0-A11 = 0x400 - * - * Write Burst Mode = Programmed Burst Length - * Op Mode = Standard Op - * CAS Latency = 2 - * Burst Type = Sequential - * Burst Length = 1 - */ - *(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5; - asm(" nop"); - } - - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -}; - -int testdram (void) { - - /* TODO: XXX XXX XXX */ - printf ("DRAM test not implemented!\n"); - - return (0); -} diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds deleted file mode 100644 index 3defcd2..0000000 --- a/board/freescale/m5271evb/u-boot.lds +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(m68k) - -SECTIONS -{ - .text : - { - arch/m68k/cpu/mcf52x2/start.o (.text*) - - . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.ppcenv) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - - .reloc : - { - __got_start = .; - KEEP(*(.got)) - __got_end = .; - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - _sbss = .; - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - _ebss = .; - } - __bss_end = . ; - PROVIDE (end = .); -} |