diff options
author | Stefano Babic <sbabic@denx.de> | 2011-01-20 08:05:15 (GMT) |
---|---|---|
committer | Albert Aribaud <albert.aribaud@free.fr> | 2011-02-01 23:54:43 (GMT) |
commit | eae4988b45e17054f27d58b6fe0b42e080951382 (patch) | |
tree | 28cb3dffaef3be150910677ce7b0c4e01a177d6c /board/freescale/mx35pdk/lowlevel_init.S | |
parent | ac87c17d344ede52d8d421addf92cbb2e271f73e (diff) | |
download | u-boot-eae4988b45e17054f27d58b6fe0b42e080951382.tar.xz |
Add support for Freescale's mx35pdk board.
The patch adds suupport for the Freescale's mx35pdk board
(known as well as mx35_3stack).
The board boots from the NOR flash. Following devices
are supported:
- two ethernet devices (FEC and SMC911x on debug board)
- I2C
- PMIC (MC13892) via I2C interface
- UART
- NOR flash (64MB)
- NAND flash (2GB)
- basic access to mc9sdz60 registers via I2C interface
Signed-off-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/freescale/mx35pdk/lowlevel_init.S')
-rw-r--r-- | board/freescale/mx35pdk/lowlevel_init.S | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S new file mode 100644 index 0000000..9b0f1b5 --- /dev/null +++ b/board/freescale/mx35pdk/lowlevel_init.S @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/asm-offsets.h> +#include "mx35pdk.h" + +/* + * return soc version + * 0x10: TO1 + * 0x20: TO2 + * 0x30: TO3 + */ +.macro check_soc_version ret, tmp + ldr \tmp, =IIM_BASE_ADDR + ldr \ret, [\tmp, #IIM_SREV] + cmp \ret, #0x00 + moveq \tmp, #ROMPATCH_REV + ldreq \ret, [\tmp] + moveq \ret, \ret, lsl #4 + addne \ret, \ret, #0x10 +.endm + +/* + * AIPS setup - Only setup MPROTx registers. + * The PACR default values are good. + */ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =AIPS_MPR_CONFIG + str r1, [r0, #0x00] + str r1, [r0, #0x04] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x00] + str r1, [r0, #0x04] + + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =AIPS_OPACR_CONFIG + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] +.endm + +/* MAX (Multi-Layer AHB Crossbar Switch) setup */ +.macro init_max + ldr r0, =MAX_BASE_ADDR + /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ + ldr r1, =MAX_MPR_CONFIG + str r1, [r0, #0x000] /* for S0 */ + str r1, [r0, #0x100] /* for S1 */ + str r1, [r0, #0x200] /* for S2 */ + str r1, [r0, #0x300] /* for S3 */ + str r1, [r0, #0x400] /* for S4 */ + /* SGPCR - always park on last master */ + ldr r1, =MAX_SGPCR_CONFIG + str r1, [r0, #0x010] /* for S0 */ + str r1, [r0, #0x110] /* for S1 */ + str r1, [r0, #0x210] /* for S2 */ + str r1, [r0, #0x310] /* for S3 */ + str r1, [r0, #0x410] /* for S4 */ + /* MGPCR - restore default values */ + ldr r1, =MAX_MGPCR_CONFIG + str r1, [r0, #0x800] /* for M0 */ + str r1, [r0, #0x900] /* for M1 */ + str r1, [r0, #0xA00] /* for M2 */ + str r1, [r0, #0xB00] /* for M3 */ + str r1, [r0, #0xC00] /* for M4 */ + str r1, [r0, #0xD00] /* for M5 */ +.endm + +/* M3IF setup */ +.macro init_m3if + /* Configure M3IF registers */ + ldr r1, =M3IF_BASE_ADDR + /* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ + ldr r0, =M3IF_CONFIG + str r0, [r1] /* M3IF control reg */ +.endm + +/* CPLD on CS5 setup */ +.macro init_debug_board + ldr r0, =DBG_BASE_ADDR + ldr r1, =DBG_CSCR_U_CONFIG + str r1, [r0, #0x00] + ldr r1, =DBG_CSCR_L_CONFIG + str r1, [r0, #0x04] + ldr r1, =DBG_CSCR_A_CONFIG + str r1, [r0, #0x08] +.endm + +/* clock setup */ +.macro init_clock + ldr r0, =CCM_BASE_ADDR + + /* default CLKO to 1/32 of the ARM core*/ + ldr r1, [r0, #CLKCTL_COSR] + bic r1, r1, #0x00000FF00 + bic r1, r1, #0x0000000FF + mov r2, #0x00006C00 + add r2, r2, #0x67 + orr r1, r1, r2 + str r1, [r0, #CLKCTL_COSR] + + ldr r2, =CCM_CCMR_CONFIG + str r2, [r0, #CLKCTL_CCMR] + + check_soc_version r1, r2 + cmp r1, #CHIP_REV_2_0 + ldrhs r3, =CCM_MPLL_532_HZ + bhs 1f + ldr r2, [r0, #CLKCTL_PDR0] + tst r2, #CLKMODE_CONSUMER + ldrne r3, =CCM_MPLL_532_HZ /* consumer path*/ + ldreq r3, =CCM_MPLL_399_HZ /* auto path*/ +1: + str r3, [r0, #CLKCTL_MPCTL] + + ldr r1, =CCM_PPLL_300_HZ + str r1, [r0, #CLKCTL_PPCTL] + + ldr r1, =CCM_PDR0_CONFIG + bic r1, r1, #0x800000 + str r1, [r0, #CLKCTL_PDR0] + + ldr r1, [r0, #CLKCTL_CGR0] + orr r1, r1, #0x0C300000 + str r1, [r0, #CLKCTL_CGR0] + + ldr r1, [r0, #CLKCTL_CGR1] + orr r1, r1, #0x00000C00 + orr r1, r1, #0x00000003 + str r1, [r0, #CLKCTL_CGR1] +.endm + +.macro setup_sdram + ldr r0, =ESDCTL_BASE_ADDR + mov r3, #0x2000 + str r3, [r0, #0x0] + str r3, [r0, #0x8] + + /*ip(r12) has used to save lr register in upper calling*/ + mov fp, lr + + mov r5, #0x00 + mov r2, #0x00 + mov r1, #CSD0_BASE_ADDR + bl setup_sdram_bank + cmp r3, #0x0 + orreq r5, r5, #1 + eorne r2, r2, #0x1 + blne setup_sdram_bank + + mov lr, fp + +1: + ldr r3, =ESDCTL_DELAY_LINE5 + str r3, [r0, #0x30] +.endm + +.globl lowlevel_init +lowlevel_init: + mov r10, lr + + mrc 15, 0, r1, c1, c0, 0 + + mrc 15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr 15, 0, r0, c1, c0, 1 + orr r1, r1, #(1<<11) + + /* Set unaligned access enable */ + orr r1, r1, #(1<<22) + + /* Set low int latency enable */ + orr r1, r1, #(1<<21) + + mcr 15, 0, r1, c1, c0, 0 + + mov r0, #0 + + /* Set branch prediction enable */ + mcr 15, 0, r0, c15, c2, 4 + + mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ + mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ + mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + + /* + * initializes very early AIPS + * Then it also initializes Multi-Layer AHB Crossbar Switch, + * M3IF + * Also setup the Peripheral Port Remap register inside the core + */ + ldr r0, =0x40000015 /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 + + init_aips + + init_max + + init_m3if + + init_clock + init_debug_board + + cmp pc, #PHYS_SDRAM_1 + blo init_sdram_start + cmp pc, #(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) + blo skip_sdram_setup + +init_sdram_start: + /*init_sdram*/ + setup_sdram + +skip_sdram_setup: + mov lr, r10 + mov pc, lr + + +/* + * r0: ESDCTL control base, r1: sdram slot base + * r2: DDR type(0:DDR2, 1:MDDR) r3, r4:working base + */ +setup_sdram_bank: + mov r3, #0xE + tst r2, #0x1 + orreq r3, r3, #0x300 /*DDR2*/ + str r3, [r0, #0x10] + bic r3, r3, #0x00A + str r3, [r0, #0x10] + beq 2f + + mov r3, #0x20000 +1: subs r3, r3, #1 + bne 1b + +2: tst r2, #0x1 + ldreq r3, =ESDCTL_DDR2_CONFIG + ldrne r3, =ESDCTL_MDDR_CONFIG + cmp r1, #CSD1_BASE_ADDR + strlo r3, [r0, #0x4] + strhs r3, [r0, #0xC] + + ldr r3, =ESDCTL_0x92220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_PRECHARGE + strb r3, [r1, r4] + + tst r2, #0x1 + bne skip_set_mode + + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0xB2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_DDR2_EMR2 + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_EMR3 + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_EN_DLL + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_RESET_DLL + strb r3, [r1, r4] + + ldr r3, =ESDCTL_0x92220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_PRECHARGE + strb r3, [r1, r4] + +skip_set_mode: + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0xA2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + strb r3, [r1] + strb r3, [r1] + + ldr r3, =ESDCTL_0xB2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + tst r2, #0x1 + ldreq r4, =ESDCTL_DDR2_MR + ldrne r4, =ESDCTL_MDDR_MR + mov r3, #0xDA + strb r3, [r1, r4] + ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT + streqb r3, [r1, r4] + ldreq r4, =ESDCTL_DDR2_EN_DLL + ldrne r4, =ESDCTL_MDDR_EMR + strb r3, [r1, r4] + + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0x82228080 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + + tst r2, #0x1 + moveq r4, #0x20000 + movne r4, #0x200 +1: subs r4, r4, #1 + bne 1b + + str r3, [r1, #0x100] + ldr r4, [r1, #0x100] + cmp r3, r4 + movne r3, #1 + moveq r3, #0 + + mov pc, lr |