diff options
| author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2015-10-14 08:46:36 (GMT) |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2015-10-14 08:46:36 (GMT) |
| commit | 13a3972585af60ec367d209cedbd3601e0c77467 (patch) | |
| tree | 4b3312669b3e501f6bc10b39d8c7bbf516f07aac /board/freescale/mx6ul_14x14_evk/README | |
| parent | 208bd51396fb606dbdcf45b064e6b372d7dd3e81 (diff) | |
| parent | 297faccca2235e359012118495b9b73451d54bb9 (diff) | |
| download | u-boot-13a3972585af60ec367d209cedbd3601e0c77467.tar.xz | |
Merge remote-tracking branch 'u-boot/master'
Diffstat (limited to 'board/freescale/mx6ul_14x14_evk/README')
| -rw-r--r-- | board/freescale/mx6ul_14x14_evk/README | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README new file mode 100644 index 0000000..d48c7ba --- /dev/null +++ b/board/freescale/mx6ul_14x14_evk/README @@ -0,0 +1,32 @@ +How to use U-boot on Freescale MX6UL 14x14 EVK +----------------------------------------------- + +- Build U-boot for MX6UL 14x14 EVK: + +$ make mrproper +$ make mx6ul_14x14_evk_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the micro SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot.img image into the micro SD card: + +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Jumper settings: + +SW601: 0 0 1 0 +Sw602: 1 0 + +where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +- Connect the USB cable between the EVK and the PC for the console. +(The USB console connector is the one close the push buttons) + +- Insert the micro SD card in the board, power it up and U-boot messages should +come up. |