diff options
| author | York Sun <york.sun@nxp.com> | 2016-11-21 18:46:53 (GMT) |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2016-11-24 07:42:13 (GMT) |
| commit | a016735c7902d1b50940dce48980c4e302c1bfe9 (patch) | |
| tree | 7cc67a6c79ea6a594b7e96f34941c18c10097876 /board/freescale/t104xrdb | |
| parent | 5d737010738c3a02ff346cae3d69cf20ab328d7f (diff) | |
| download | u-boot-a016735c7902d1b50940dce48980c4e302c1bfe9.tar.xz | |
powerpc: T1040D4RDB: Separate from T1040RDB in Kconfig
Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace
CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros.
Signed-off-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'board/freescale/t104xrdb')
| -rw-r--r-- | board/freescale/t104xrdb/Kconfig | 2 | ||||
| -rw-r--r-- | board/freescale/t104xrdb/eth.c | 2 | ||||
| -rw-r--r-- | board/freescale/t104xrdb/t104xrdb.c | 2 |
3 files changed, 3 insertions, 3 deletions
diff --git a/board/freescale/t104xrdb/Kconfig b/board/freescale/t104xrdb/Kconfig index 5b6095b..2a633c0 100644 --- a/board/freescale/t104xrdb/Kconfig +++ b/board/freescale/t104xrdb/Kconfig @@ -1,4 +1,4 @@ -if TARGET_T1040RDB || TARGET_T1042RDB +if TARGET_T1040RDB || TARGET_T1040D4RDB || TARGET_T1042RDB config SYS_BOARD default "t104xrdb" diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index 52cd112..ea9f450 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -43,7 +43,7 @@ int board_eth_init(bd_t *bis) int idx = i - FM1_DTSEC1; switch (fm_info_get_enet_if(i)) { -#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB) +#if defined(CONFIG_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB) case PHY_INTERFACE_MODE_SGMII: /* T1040RDB & T1040D4RDB only supports SGMII on * DTSEC3 diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index 6bad6a454..803666e 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -105,7 +105,7 @@ int misc_init_r(void) CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL); -#if defined(CONFIG_T1040D4RDB) +#if defined(CONFIG_TARGET_T1040D4RDB) if (hwconfig("qe-tdm")) { CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) | MISC_MUX_QE_TDM); |