diff options
| author | Roy Zang <tie-fei.zang@freescale.com> | 2011-10-28 05:15:36 (GMT) |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2011-11-08 14:18:16 (GMT) |
| commit | afc52db2f76e0215411a916af46c578fcfd02a81 (patch) | |
| tree | a48a045455d0adfd07b9462ccee0c1540a56ee0e /board/freescale | |
| parent | 5721385b187b3154c7768e6c182501022f4e2e45 (diff) | |
| download | u-boot-afc52db2f76e0215411a916af46c578fcfd02a81.tar.xz | |
powerpc/QorIQ: fix network frame manager TBI PHY address settings
TBI PHY address (TBIPA) register has been set in general frame manager
phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c
So remove the duplicate code on QorIQ frame manager Ethernet related
platforms, which include Hydra board, P4080DS board and P2041rdb board.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/corenet_ds/eth_hydra.c | 8 | ||||
| -rw-r--r-- | board/freescale/corenet_ds/eth_p4080.c | 8 | ||||
| -rw-r--r-- | board/freescale/p2041rdb/eth.c | 8 |
3 files changed, 0 insertions, 24 deletions
diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c index a7a5e13..962f380 100644 --- a/board/freescale/corenet_ds/eth_hydra.c +++ b/board/freescale/corenet_ds/eth_hydra.c @@ -377,7 +377,6 @@ void fdt_fixup_board_enet(void *fdt) int board_eth_init(bd_t *bis) { #ifdef CONFIG_FMAN_ENET - struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; unsigned int i, slot; @@ -387,13 +386,6 @@ int board_eth_init(bd_t *bis) initialize_lane_to_slot(); - /* - * Set TBIPA on FM1@DTSEC1. This is needed for configurations - * where FM1@DTSEC1 isn't used directly, since it provides - * MDIO for other ports. - */ - out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); - /* We want to use the PIXIS to configure MUX routing, not GPIOs. */ setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL); diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c index 7ff00d1..1f00c14 100644 --- a/board/freescale/corenet_ds/eth_p4080.c +++ b/board/freescale/corenet_ds/eth_p4080.c @@ -301,7 +301,6 @@ int board_eth_init(bd_t *bis) { #ifdef CONFIG_FMAN_ENET ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; int i; struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; @@ -327,13 +326,6 @@ int board_eth_init(bd_t *bis) SLOT5, /* 17 - Bank 3:D */ }; - /* - * Set TBIPA on FM1@DTSEC1. This is needed for configurations - * where FM1@DTSEC1 isn't used directly, since it provides - * MDIO for other ports. - */ - out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); - /* Initialize the mdio_mux array so we can recognize empty elements */ for (i = 0; i < NUM_FM_PORTS; i++) mdio_mux[i] = EMI_NONE; diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c index 0a1dfa7..4b0d577 100644 --- a/board/freescale/p2041rdb/eth.c +++ b/board/freescale/p2041rdb/eth.c @@ -139,7 +139,6 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, int board_eth_init(bd_t *bis) { #ifdef CONFIG_FMAN_ENET - struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; unsigned int i, slot; @@ -149,13 +148,6 @@ int board_eth_init(bd_t *bis) initialize_lane_to_slot(); - /* - * Set TBIPA on FM1@DTSEC1. This is needed for configurations - * where FM1@DTSEC1 isn't used directly, since it provides - * MDIO for other ports. - */ - out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); - dtsec_mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; |