diff options
author | Prabhakar Kushwaha <prabhakar@freescale.com> | 2015-03-21 02:28:26 (GMT) |
---|---|---|
committer | York Sun <yorksun@freescale.com> | 2015-04-23 23:46:50 (GMT) |
commit | e60476a01ebe7d8c46aac5673dcf55b661187c19 (patch) | |
tree | d73031d7cf49371660c3fa4c9796c73c62c53e2a /board/freescale | |
parent | e2b65ea975c2ddc67a958bf428e34ee3c543061a (diff) | |
download | u-boot-e60476a01ebe7d8c46aac5673dcf55b661187c19.tar.xz |
board/ls2085qds: Add support ethernet
Add support of ethernet:
- eth.c: mapping lane to slot for (0x2A, 0x07)
- ls2085a.c: To enable/disable dpmac and get link type
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'board/freescale')
-rw-r--r-- | board/freescale/ls2085aqds/Makefile | 1 | ||||
-rw-r--r-- | board/freescale/ls2085aqds/eth.c | 380 | ||||
-rw-r--r-- | board/freescale/ls2085aqds/ls2085aqds.c | 13 | ||||
-rw-r--r-- | board/freescale/ls2085aqds/ls2085aqds_qixis.h | 4 |
4 files changed, 385 insertions, 13 deletions
diff --git a/board/freescale/ls2085aqds/Makefile b/board/freescale/ls2085aqds/Makefile index f174f33..da69a7d 100644 --- a/board/freescale/ls2085aqds/Makefile +++ b/board/freescale/ls2085aqds/Makefile @@ -6,3 +6,4 @@ obj-y += ls2085aqds.o obj-y += ddr.o +obj-y += eth.o diff --git a/board/freescale/ls2085aqds/eth.c b/board/freescale/ls2085aqds/eth.c new file mode 100644 index 0000000..5ba4770 --- /dev/null +++ b/board/freescale/ls2085aqds/eth.c @@ -0,0 +1,380 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch-fsl-lsch3/immap_lsch3.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <fm_eth.h> +#include <fsl-mc/ldpaa_wriop.h> + +#include "../common/qixis.h" + +#include "ls2085aqds_qixis.h" + + +#ifdef CONFIG_FSL_MC_ENET + /* - In LS2085A there are only 16 SERDES lanes, spread across 2 SERDES banks. + * Bank 1 -> Lanes A, B, C, D, E, F, G, H + * Bank 2 -> Lanes A,B, C, D, E, F, G, H + */ + + /* Mapping of 16 SERDES lanes to LS2085A QDS board slots. A value of '0' here + * means that the mapping must be determined dynamically, or that the lane + * maps to something other than a board slot. + */ + +static u8 lane_to_slot_fsm2[] = { + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs + * housed. + */ +static int riser_phy_addr[] = { + SGMII_CARD_PORT1_PHY_ADDR, + SGMII_CARD_PORT2_PHY_ADDR, + SGMII_CARD_PORT3_PHY_ADDR, + SGMII_CARD_PORT4_PHY_ADDR, +}; + +/* Slot2 does not have EMI connections */ +#define EMI_NONE 0xFFFFFFFF +#define EMI1_SLOT1 0 +#define EMI1_SLOT2 1 +#define EMI1_SLOT3 2 +#define EMI1_SLOT4 3 +#define EMI1_SLOT5 4 +#define EMI1_SLOT6 5 +#define EMI2 6 +#define SFP_TX 1 + +static const char * const mdio_names[] = { + "LS2085A_QDS_MDIO0", + "LS2085A_QDS_MDIO1", + "LS2085A_QDS_MDIO2", + "LS2085A_QDS_MDIO3", + "LS2085A_QDS_MDIO4", + "LS2085A_QDS_MDIO5", + DEFAULT_WRIOP_MDIO2_NAME, +}; + +struct ls2085a_qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = ls2085a_qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +static void ls2085a_qds_enable_SFP_TX(u8 muxval) +{ + u8 brdcfg9; + + brdcfg9 = QIXIS_READ(brdcfg[9]); + brdcfg9 &= ~BRDCFG9_SFPTX_MASK; + brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT); + QIXIS_WRITE(brdcfg[9], brdcfg9); +} + +static void ls2085a_qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + + if (muxval <= 5) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int ls2085a_qds_mdio_read(struct mii_dev *bus, int addr, + int devad, int regnum) +{ + struct ls2085a_qds_mdio *priv = bus->priv; + + ls2085a_qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int ls2085a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct ls2085a_qds_mdio *priv = bus->priv; + + ls2085a_qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int ls2085a_qds_mdio_reset(struct mii_dev *bus) +{ + struct ls2085a_qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int ls2085a_qds_mdio_init(char *realbusname, u8 muxval) +{ + struct ls2085a_qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate ls2085a_qds MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate ls2085a_qds private data\n"); + free(bus); + return -1; + } + + bus->read = ls2085a_qds_mdio_read; + bus->write = ls2085a_qds_mdio_write; + bus->reset = ls2085a_qds_mdio_reset; + sprintf(bus->name, ls2085a_qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +/* + * Initialize the dpmac_info array. + * + */ +static void initialize_dpmac_to_slot(void) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) & + FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK) + >> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; + int serdes2_prtcl = (in_le32(&gur->rcwsr[28]) & + FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK) + >> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT; + + + switch (serdes1_prtcl) { + case 0x2A: + printf("qds: WRIOP: Supported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + default: + printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } + + switch (serdes2_prtcl) { + case 0x07: + case 0x08: + printf("qds: WRIOP: Supported SerDes Protocol 0x%02x\n", + serdes2_prtcl); + lane_to_slot_fsm2[0] = EMI1_SLOT4; + lane_to_slot_fsm2[1] = EMI1_SLOT4; + lane_to_slot_fsm2[2] = EMI1_SLOT4; + lane_to_slot_fsm2[3] = EMI1_SLOT4; + /* No MDIO physical connection */ + lane_to_slot_fsm2[4] = EMI1_SLOT6; + lane_to_slot_fsm2[5] = EMI1_SLOT6; + lane_to_slot_fsm2[6] = EMI1_SLOT6; + lane_to_slot_fsm2[7] = EMI1_SLOT6; + break; + default: + printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", + serdes2_prtcl); + break; + } +} + +void ls2085a_handle_phy_interface_sgmii(int dpmac_id) +{ + int lane, slot; + struct mii_dev *bus; + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) & + FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK) + >> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; + int serdes2_prtcl = (in_le32(&gur->rcwsr[28]) & + FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK) + >> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT; + + switch (serdes1_prtcl) { + } + + switch (serdes2_prtcl) { + case 0x07: + case 0x08: + lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 + + (dpmac_id - 9)); + slot = lane_to_slot_fsm2[lane]; + + switch (++slot) { + case 1: + break; + case 3: + break; + case 4: + /* Slot housing a SGMII riser card? */ + wriop_set_phy_address(dpmac_id, + riser_phy_addr[dpmac_id - 9]); + dpmac_info[dpmac_id].board_mux = EMI1_SLOT4; + bus = mii_dev_for_muxval(EMI1_SLOT4); + wriop_set_mdio(dpmac_id, bus); + dpmac_info[dpmac_id].phydev = phy_connect( + dpmac_info[dpmac_id].bus, + dpmac_info[dpmac_id].phy_addr, + NULL, + dpmac_info[dpmac_id].enet_if); + phy_config(dpmac_info[dpmac_id].phydev); + break; + case 5: + break; + case 6: + /* Slot housing a SGMII riser card? */ + wriop_set_phy_address(dpmac_id, + riser_phy_addr[dpmac_id - 13]); + dpmac_info[dpmac_id].board_mux = EMI1_SLOT6; + bus = mii_dev_for_muxval(EMI1_SLOT6); + wriop_set_mdio(dpmac_id, bus); + break; + } + break; + default: + printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", + serdes2_prtcl); + break; + } +} +void ls2085a_handle_phy_interface_xsgmii(int i) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) & + FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK) + >> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; + + switch (serdes1_prtcl) { + case 0x2A: + /* + * XFI does not need a PHY to work, but to avoid U-boot use + * default PHY address which is zero to a MAC when it found + * a MAC has no PHY address, we give a PHY address to XFI + * MAC, and should not use a real XAUI PHY address, since + * MDIO can access it successfully, and then MDIO thinks + * the XAUI card is used for the XFI MAC, which will cause + * error. + */ + wriop_set_phy_address(i, i + 4); + ls2085a_qds_enable_SFP_TX(SFP_TX); + + break; + default: + printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } +} +#endif + +int board_eth_init(bd_t *bis) +{ + int error; +#ifdef CONFIG_FSL_MC_ENET + struct memac_mdio_info *memac_mdio0_info; + struct memac_mdio_info *memac_mdio1_info; + unsigned int i; + + initialize_dpmac_to_slot(); + + memac_mdio0_info = (struct memac_mdio_info *)malloc( + sizeof(struct memac_mdio_info)); + memac_mdio0_info->regs = + (struct memac_mdio_controller *) + CONFIG_SYS_FSL_WRIOP1_MDIO1; + memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME; + + /* Register the real MDIO1 bus */ + fm_memac_mdio_init(bis, memac_mdio0_info); + + memac_mdio1_info = (struct memac_mdio_info *)malloc( + sizeof(struct memac_mdio_info)); + memac_mdio1_info->regs = + (struct memac_mdio_controller *) + CONFIG_SYS_FSL_WRIOP1_MDIO2; + memac_mdio1_info->name = DEFAULT_WRIOP_MDIO2_NAME; + + /* Register the real MDIO2 bus */ + fm_memac_mdio_init(bis, memac_mdio1_info); + + /* Register the muxing front-ends to the MDIO buses */ + ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); + ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2); + ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3); + ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4); + ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5); + ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6); + + ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2); + + for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { + switch (wriop_get_enet_if(i)) { + case PHY_INTERFACE_MODE_QSGMII: + break; + case PHY_INTERFACE_MODE_SGMII: + ls2085a_handle_phy_interface_sgmii(i); + break; + case PHY_INTERFACE_MODE_XGMII: + ls2085a_handle_phy_interface_xsgmii(i); + break; + default: + break; + } + } + + error = cpu_eth_init(bis); +#endif + error = pci_eth_init(bis); + return error; +} diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2085aqds/ls2085aqds.c index f7ed5b9..6a22122 100644 --- a/board/freescale/ls2085aqds/ls2085aqds.c +++ b/board/freescale/ls2085aqds/ls2085aqds.c @@ -214,19 +214,6 @@ unsigned long get_dram_size_to_hide(void) return dram_to_hide; } -int board_eth_init(bd_t *bis) -{ - int error = 0; - -#ifdef CONFIG_FSL_MC_ENET - error = cpu_eth_init(bis); -#endif - - error = pci_eth_init(bis); - - return error; -} - #ifdef CONFIG_FSL_MC_ENET void fdt_fixup_board_enet(void *fdt) { diff --git a/board/freescale/ls2085aqds/ls2085aqds_qixis.h b/board/freescale/ls2085aqds/ls2085aqds_qixis.h index bb43e65..e281e5f 100644 --- a/board/freescale/ls2085aqds/ls2085aqds_qixis.h +++ b/board/freescale/ls2085aqds/ls2085aqds_qixis.h @@ -23,4 +23,8 @@ #define QIXIS_DDRCLK_125 0x2 #define QIXIS_DDRCLK_133 0x3 +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 +#define BRDCFG9_SFPTX_MASK 0x10 +#define BRDCFG9_SFPTX_SHIFT 4 #endif /*__LS2_QDS_QIXIS_H__*/ |