diff options
author | Alison Wang <b18965@freescale.com> | 2014-12-09 09:38:02 (GMT) |
---|---|---|
committer | York Sun <yorksun@freescale.com> | 2014-12-11 17:40:14 (GMT) |
commit | d612f0ab34b27be4ad50b1236fbd6c84450997f1 (patch) | |
tree | d175f1c357b997510468ebd220712f0a4a414c03 /board/freescale | |
parent | 4c59ab9cfbdd34f5ef1e960470accdc63e2483c1 (diff) | |
download | u-boot-d612f0ab34b27be4ad50b1236fbd6c84450997f1.tar.xz |
arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
This patch adds QSPI boot support for LS1021AQDS/TWR board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then the booting will start from QSPI memory space.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'board/freescale')
-rw-r--r-- | board/freescale/ls1021aqds/MAINTAINERS | 1 | ||||
-rw-r--r-- | board/freescale/ls1021aqds/ls1021aqds.c | 8 | ||||
-rw-r--r-- | board/freescale/ls1021atwr/MAINTAINERS | 1 | ||||
-rw-r--r-- | board/freescale/ls1021atwr/ls1021atwr.c | 14 |
4 files changed, 24 insertions, 0 deletions
diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS index 962176b..7a704cf 100644 --- a/board/freescale/ls1021aqds/MAINTAINERS +++ b/board/freescale/ls1021aqds/MAINTAINERS @@ -7,3 +7,4 @@ F: configs/ls1021aqds_nor_defconfig F: configs/ls1021aqds_ddr4_nor_defconfig F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig F: configs/ls1021aqds_sdcard_defconfig +F: configs/ls1021aqds_qspi_defconfig diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 9eab42d..9fcd129 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -34,7 +34,9 @@ enum { int checkboard(void) { +#ifndef CONFIG_QSPI_BOOT char buf[64]; +#endif #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) u8 sw; #endif @@ -61,12 +63,14 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); #endif +#ifndef CONFIG_QSPI_BOOT printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n", QIXIS_READ(id), QIXIS_READ(arch)); printf("FPGA: v%d (%s), build %d\n", (int)QIXIS_READ(scver), qixis_read_tag(buf), (int)qixis_read_minor()); +#endif return 0; } @@ -164,6 +168,10 @@ int board_early_init_f(void) init_early_memctl_regs(); #endif +#ifdef CONFIG_FSL_QSPI + out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); +#endif + /* Workaround for the issue that DDR could not respond to * barrier transaction which is generated by executing DSB/ISB * instruction. Set CCI-400 control override register to diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS index 2312e00..9176706 100644 --- a/board/freescale/ls1021atwr/MAINTAINERS +++ b/board/freescale/ls1021atwr/MAINTAINERS @@ -6,3 +6,4 @@ F: include/configs/ls1021atwr.h F: configs/ls1021atwr_nor_defconfig F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig F: configs/ls1021atwr_sdcard_defconfig +F: configs/ls1021atwr_qspi_defconfig diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 0faee0a..5c3a282 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -72,6 +72,7 @@ struct cpld_data { u8 rev2; /* Reserved */ }; +#ifndef CONFIG_QSPI_BOOT static void convert_serdes_mux(int type, int need_reset); void cpld_show(void) @@ -107,11 +108,14 @@ void cpld_show(void) in_8(&cpld_data->serdes_mux)); #endif } +#endif int checkboard(void) { puts("Board: LS1021ATWR\n"); +#ifndef CONFIG_QSPI_BOOT cpld_show(); +#endif return 0; } @@ -220,6 +224,7 @@ int board_eth_init(bd_t *bis) } #endif +#ifndef CONFIG_QSPI_BOOT int config_serdes_mux(void) { struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); @@ -251,6 +256,7 @@ int config_serdes_mux(void) return 0; } +#endif int board_early_init_f(void) { @@ -269,6 +275,10 @@ int board_early_init_f(void) out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); #endif +#ifdef CONFIG_FSL_QSPI + out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); +#endif + return 0; } @@ -305,8 +315,10 @@ int board_init(void) #ifndef CONFIG_SYS_FSL_NO_SERDES fsl_serdes_init(); +#ifndef CONFIG_QSPI_BOOT config_serdes_mux(); #endif +#endif #ifdef CONFIG_U_QE u_qe_init(); @@ -354,6 +366,7 @@ u16 flash_read16(void *addr) return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); } +#ifndef CONFIG_QSPI_BOOT static void convert_flash_bank(char bank) { struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); @@ -536,3 +549,4 @@ U_BOOT_CMD( " -change lane C & lane D to PCIeX2\n" "\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n" ); +#endif |