diff options
author | roy zang <tie-fei.zang@freescale.com> | 2006-12-01 03:47:36 (GMT) |
---|---|---|
committer | Zang Tiefei <roy@bus.ap.freescale.net> | 2006-12-01 03:47:36 (GMT) |
commit | ee311214e0d216f904feea269599d0934bf71f23 (patch) | |
tree | 8f942227d016d8cc52a12f4b66a02e4b1e7ed19b /board/mpc7448hpc2 | |
parent | 6bd87c0aeea441c49d59fd542b84a9be88d08b17 (diff) | |
download | u-boot-ee311214e0d216f904feea269599d0934bf71f23.tar.xz |
Clean up the code according to codestyle:
(1) remove some C++ comments.
(2) remove trailing white space.
(3) remove trailing empty line.
(4) Indentation by table.
(5) remove {} in one line condition.
(6) add space before '(' in function call.
Remove some weird printf () output.
Add necessary comments.
Modified Makefile to support building in a separate directory.
Diffstat (limited to 'board/mpc7448hpc2')
-rw-r--r-- | board/mpc7448hpc2/Makefile | 20 | ||||
-rw-r--r-- | board/mpc7448hpc2/asm_init.S | 1143 | ||||
-rw-r--r-- | board/mpc7448hpc2/mpc7448hpc2.c | 152 | ||||
-rw-r--r-- | board/mpc7448hpc2/tsi108_init.c | 421 |
4 files changed, 851 insertions, 885 deletions
diff --git a/board/mpc7448hpc2/Makefile b/board/mpc7448hpc2/Makefile index d5ed01f..e3d757d 100644 --- a/board/mpc7448hpc2/Makefile +++ b/board/mpc7448hpc2/Makefile @@ -23,26 +23,30 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o tsi108_init.o +COBJS := $(BOARD).o tsi108_init.o +SOBJS := asm_init.o -SOBJS = asm_init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) +.PHONY: distclean distclean: clean rm -f $(LIB) core *.bak .depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude ($obj).depend ######################################################################### diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S index 8c15a3d..a7a40a1 100644 --- a/board/mpc7448hpc2/asm_init.S +++ b/board/mpc7448hpc2/asm_init.S @@ -1,10 +1,10 @@ -/***************************************************************************** +/* * (C) Copyright 2004-05; Tundra Semiconductor Corp. - * + * * Added automatic detect of SDC settings * Copyright (c) 2005 Freescale Semiconductor, Inc. * Maintainer tie-fei.zang@freescale.com - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -19,9 +19,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - ****************************************************************************/ + */ -/*---------------------------------------------------------------------------- +/* * FILENAME: asm_init.s * * Originator: Alex Bounine @@ -29,7 +29,7 @@ * DESCRIPTION: * Initialization code for the Tundra Tsi108 bridge chip * - *---------------------------------------------------------------------------*/ + */ #include <config.h> #include <version.h> @@ -40,15 +40,15 @@ #include <tsi108.h> -/*=========================================================================== +/* * Build Configuration Options */ -/* #define DISABLE_PBM disables usage of PB Master */ -/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */ -/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */ +/* #define DISABLE_PBM disables usage of PB Master */ +/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */ +/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */ -/* =========================================================================== +/* * Hardcoded SDC settings */ @@ -56,571 +56,543 @@ /* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */ -#define VAL_SD_REFRESH (0x61A) -#define VAL_SD_TIMING (0x0308336b) -#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */ -#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */ -#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */ -#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */ +#define VAL_SD_REFRESH (0x61A) +#define VAL_SD_TIMING (0x0308336b) +#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */ +#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */ #endif /* SDC_HARDCODED_INIT */ -/*--------------------------------------------------------------------------- +/* CPU Configuration: CPU Address and Data Parity enables. #define CPU_AP #define CPU_DP +*/ -=========================================================================== - Macros - - !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are - expected to work correctly for the CSR space within 32KB range. - - LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant. - These macros are absolutely identical except their names. This difference - is provided intentionally for better readable code. - -------------------------------------------------------------------------*/ +/* + * Macros + * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are + * expected to work correctly for the CSR space within 32KB range. + * + * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant. + * These macros are absolutely identical except their names. This difference + * is provided intentionally for better readable code. + */ #define LOAD_PTR(reg,const32) \ - addis reg,r0,const32@h; ori reg,reg,const32@l + addis reg,r0,const32@h; ori reg,reg,const32@l #define LOAD_U32(reg,const32) \ - addis reg,r0,const32@h; ori reg,reg,const32@l + addis reg,r0,const32@h; ori reg,reg,const32@l -/* LOADMEM initializes a register with the contents of a specified 32-bit memory - location, usually a CSR value.*/ +/* LOADMEM initializes a register with the contents of a specified 32-bit + * memory location, usually a CSR value. + */ #define LOAD_MEM(reg,addr32) \ - addis reg,r0,addr32@ha; lwz reg,addr32@l(reg) + addis reg,r0,addr32@ha; lwz reg,addr32@l(reg) #ifndef SDC_HARDCODED_INIT sdc_clk_sync: /* MHz: 0,0,183,100,133,167,200,233 */ - .long 0,0, 6, 10, 8, 6, 5, 4 /* nSec */ + .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */ #endif -/*=========================================================================== - board_asm_init() - early initialization function. Coded to be portable to - dual-CPU configuration. - Checks CPU number and performs board HW initialization if called for CPU0. - - Registers used: r3,r4,r5,r6,r19,r29 -=========================================================================== - ---------------------------------------------------------------------------- - NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108 - and the rest of the board. Current implementation demonstrates two - possible ways to identify CPU number: - - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM. - - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108. ----------------------------------------------------------------------------*/ +/* + * board_asm_init() - early initialization function. Coded to be portable to + * dual-CPU configuration. + * Checks CPU number and performs board HW initialization if called for CPU0. + * Registers used: r3,r4,r5,r6,r19,r29 + * + * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108 + * and the rest of the board. Current implementation demonstrates two + * possible ways to identify CPU number: + * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM. + * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108. + */ - .globl board_asm_init + .globl board_asm_init board_asm_init: + mflr r19 /* Save LR to be able return later. */ + bl icache_enable /* Enable icache to reduce reads from flash. */ - mflr r19 /* Save LR to be able return later. */ - - bl icache_enable /* Enable icache to reduce reads from flash. */ +/* Initialize pointer to Tsi108 register space */ - /* Initialize pointer to Tsi108 register space - -------------------------------------------------------------------------*/ + LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ + ori r4,r29,TSI108_PB_REG_OFFSET - LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ - ori r4,r29,TSI108_PB_REG_OFFSET +/* Check Processor Version Number */ - /*------------------------------------------------------------------------- - Check Processor Version Number */ + mfspr r3, PVR + rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */ - mfspr r3, PVR - rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */ + cmpli 0,0,r3,0x8000 /* MPC74xx */ + bne cont_brd_init - cmpli 0,0,r3,0x8000 /* MPC74xx */ - bne cont_brd_init - - /* ------------------------------------------ - For MPC744x/5x enable extended BATs[4-7] - Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1 - to disable prefetch - */ - - mfspr r5, HID0 - oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */ - ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */ - mtspr HID0, r5 - isync - sync + /* + * For MPC744x/5x enable extended BATs[4-7] + * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1 + * to disable prefetch + */ - /* Adding code to disable external interventions in MPX bus mode */ - mfspr r3, 1014 - oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */ - mtspr 1014, r3 - isync - sync + mfspr r5, HID0 + oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */ + ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */ + mtspr HID0, r5 + isync + sync - /* Sri: code to enable FP unit */ - mfmsr r3 - ori r3, r3, 0x2000 - mtmsr r3 - isync - sync + /* Adding code to disable external interventions in MPX bus mode */ + mfspr r3, 1014 + oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */ + mtspr 1014, r3 + isync + sync -#if(1) /* def CONFIG_DUAL_CPU - ------------------------------------------------------------------------- - For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number. - */ + /* Sri: code to enable FP unit */ + mfmsr r3 + ori r3, r3, 0x2000 + mtmsr r3 + isync + sync - mfspr r3,1014 /* read MSSCR0 */ - rlwinm. r3,r3,27,31,31 /* get processor ID number */ - mtspr SPRN_PIR,r3 /* Save CPU ID */ - sync - bne init_done - b do_tsi108_init + /* def CONFIG_DUAL_CPU + * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number. + */ +#if(1) + mfspr r3,1014 /* read MSSCR0 */ + rlwinm. r3,r3,27,31,31 /* get processor ID number */ + mtspr SPRN_PIR,r3 /* Save CPU ID */ + sync + bne init_done + b do_tsi108_init cont_brd_init: - /* An alternative method of checking the processor number (in addition - to configuration using MSSCR0[ID] bit on MPC74xx). - Good for IBM PPC750FX/GX. - */ - - lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */ - rlwinm. r3,r3,24,31,31 /* get processor ID number */ - - bne init_done + /* An alternative method of checking the processor number (in addition + * to configuration using MSSCR0[ID] bit on MPC74xx). + * Good for IBM PPC750FX/GX. + */ + lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */ + rlwinm. r3,r3,24,31,31 /* get processor ID number */ + bne init_done #else cont_brd_init: #endif /* CONFIG_DUAL_CPU */ - /* Initialize Tsi108 chip - --------------------------------------------------------------------------- - */ + /* Initialize Tsi108 chip */ do_tsi108_init: - /*-------------------------------------------------------------------------- - Adjust HLP/Flash parameters. By default after reset the HLP port is set - to support slow devices. Better performance can be achived when an optimal - parameters are used for specific EPROM device. - NOTE: This should be performed ASAP for the emulation platform because - it has 5MHz HLP clocking. - */ + /* + * Adjust HLP/Flash parameters. By default after reset the HLP port is + * set to support slow devices. Better performance can be achived when + * an optimal parameters are used for specific EPROM device. + * NOTE: This should be performed ASAP for the emulation platform + * because it has 5MHz HLP clocking. + */ #ifdef CONFIG_TSI108EMU - ori r4,r29,TSI108_HLP_REG_OFFSET - LOAD_U32(r5,0x434422c0) - stw r5,0x08(r4) /* set HLP B0_CTRL0 */ - sync - LOAD_U32(r5,0xd0012000) - stw r5,0x0c(r4) /* set HLP B0_CTRL1 */ - sync + ori r4,r29,TSI108_HLP_REG_OFFSET + LOAD_U32(r5,0x434422c0) + stw r5,0x08(r4) /* set HLP B0_CTRL0 */ + sync + LOAD_U32(r5,0xd0012000) + stw r5,0x0c(r4) /* set HLP B0_CTRL1 */ + sync #endif - /* ------------------------------------------------------------------------- - * Initialize PB interface. - */ + /* Initialize PB interface. */ - ori r4,r29,TSI108_PB_REG_OFFSET + ori r4,r29,TSI108_PB_REG_OFFSET #if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE) - /* Relocate (if required) Tsi108 registers. Set new value for PB_REG_BAR: - * Note we are in the 32-bit address mode. - */ - LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* value for PB_REG_BAR: BA + EN*/ - stw r5,PB_REG_BAR(r4) - andis. r29,r5,0xFFFF - sync - - ori r4,r29,TSI108_PB_REG_OFFSET + /* Relocate (if required) Tsi108 registers. Set new value for + * PB_REG_BAR: + * Note we are in the 32-bit address mode. + */ + LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */ + stw r5,PB_REG_BAR(r4) + andis. r29,r5,0xFFFF + sync + ori r4,r29,TSI108_PB_REG_OFFSET #endif - /* Set PB Slave configuration register */ + /* Set PB Slave configuration register */ -/* LOAD_U32(r5,0x000024C7) value for PB_SCR: TEA enabled,AACK delay = 7 */ - LOAD_U32(r5,0x00002481) /* value for PB_SCR: TEA enabled,AACK delay = 1 */ - lwz r3, PB_RSR(r4) /* get PB bus mode */ - xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */ - rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */ - stw r5,PB_SCR(r4) - sync + LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */ + lwz r3, PB_RSR(r4) /* get PB bus mode */ + xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */ + rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */ + stw r5,PB_SCR(r4) + sync - /* Configure PB Arbiter */ + /* Configure PB Arbiter */ - lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ - li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */ + lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */ #ifdef DISABLE_PBM - ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */ + ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */ #endif - andc r5,r5,r3 /* Clear the masked bit fields */ -/* ori r5,r5,0x0040 Set pipeline depth 4 - ori r5,r5,0x0080 Set pipeline depth 8 - ori r5,r5,0x0020 !!!avb Testing: set pipeline depth 2 */ - ori r5,r5,0x0001 - stw r5,PB_ARB_CTRL(r4) - -#if (0) /* currently using the default settings for PBM after reset */ - LOAD_U32(r5,0x) /* value for PB_MCR */ - stw r5,PB_MCR(r4) - sync - - LOAD_U32(r5,0x) /* value for PB_MCMD */ - stw r5,PB_MCMD(r4) - sync + andc r5,r5,r3 /* Clear the masked bit fields */ + ori r5,r5,0x0001 /* Set pipeline depth */ + stw r5,PB_ARB_CTRL(r4) + +#if (0) /* currently using the default settings for PBM after reset */ + LOAD_U32(r5,0x) /* value for PB_MCR */ + stw r5,PB_MCR(r4) + sync + + LOAD_U32(r5,0x) /* value for PB_MCMD */ + stw r5,PB_MCMD(r4) + sync #endif -/* Disable or enable PVT based on processor bus frequency - 1. Read CG_PWRUP_STATUS register field bits 18,17,16 - 2. See if the value is < or > 133mhz (18:16 = 100) - 3. If > enable PVT - */ + /* Disable or enable PVT based on processor bus frequency + * 1. Read CG_PWRUP_STATUS register field bits 18,17,16 + * 2. See if the value is < or > 133mhz (18:16 = 100) + * 3. If > enable PVT + */ - LOAD_U32(r3,0xC0002234) - lwz r3,0(r3) - rlwinm r3,r3,16,29,31 + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,16,29,31 - cmpi 0,0,r3,0x0004 - bgt sdc_init + cmpi 0,0,r3,0x0004 + bgt sdc_init #ifndef CONFIG_TSI108EMU - /* FIXME: Disable PB calibration control for any real Tsi108 board */ - li r5,0x0101 /* disable calibration control */ - stw r5,PB_PVT_CTRL2(r4) - sync + /* FIXME: Disable PB calibration control for any real Tsi108 board */ + li r5,0x0101 /* disable calibration control */ + stw r5,PB_PVT_CTRL2(r4) + sync #endif -/*--------------------------------------------------------------------------- - Initialize SDRAM controller. -----------------------------------------------------------------------------*/ + /* Initialize SDRAM controller. */ sdc_init: #ifndef SDC_HARDCODED_INIT - /* get SDC clock prior doing sdram controller autoconfig */ - ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */ - lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */ - rlwinm r3,r3,12,29,31 /* r3 - SD clk */ - lis r5,sdc_clk_sync@h - ori r5,r5,sdc_clk_sync@l - /* Sri: At this point check if r3 = 001. If yes, - * the memory frequency should be same as the - * MPX bus frequency - */ - cmpi 0,0,r3,0x0001 - bne get_nsec - lwz r6, CG_PWRUP_STATUS(r4) - rlwinm r6,r6,16,29,31 - mr r3,r6 + /* get SDC clock prior doing sdram controller autoconfig */ + ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */ + lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */ + rlwinm r3,r3,12,29,31 /* r3 - SD clk */ + lis r5,sdc_clk_sync@h + ori r5,r5,sdc_clk_sync@l + /* Sri: At this point check if r3 = 001. If yes, + * the memory frequency should be same as the + * MPX bus frequency + */ + cmpi 0,0,r3,0x0001 + bne get_nsec + lwz r6, CG_PWRUP_STATUS(r4) + rlwinm r6,r6,16,29,31 + mr r3,r6 get_nsec: - rlwinm r3,r3,2,0,31 - lwzx r9,r5,r3 /* get SD clk rate in nSec */ - /* ATTN: r9 will be used by SPD routine */ + rlwinm r3,r3,2,0,31 + lwzx r9,r5,r3 /* get SD clk rate in nSec */ + /* ATTN: r9 will be used by SPD routine */ #endif /* !SDC_HARDCODED_INIT */ - ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */ + ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */ - /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */ + /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */ - LOAD_U32(r5,0x00) - stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */ + LOAD_U32(r5,0x00) + stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */ #ifdef ENABLE_SDRAM_ECC - li r5, 0x01 + li r5, 0x01 #endif /* ENABLE_SDRAM_ECC */ - stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */ - sync + stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */ + sync #ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */ - /* First read the CG_PWRUP_STATUS register to get the - memory speed from bits 22,21,20 */ - - LOAD_U32(r3,0xC0002234) - lwz r3,0(r3) - rlwinm r3,r3,12,29,31 + /* First read the CG_PWRUP_STATUS register to get the + * memory speed from bits 22,21,20 + */ - /* Now first check for 166, then 200, or default */ + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,12,29,31 - cmpi 0,0,r3,0x0005 - bne check_for_200mhz + /* Now first check for 166, then 200, or default */ - /* set values for 166 Mhz memory speed */ + cmpi 0,0,r3,0x0005 + bne check_for_200mhz - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,0x00000515) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,0x03073368) - stw r5,SD_TIMING(r4) - sync + /* set values for 166 Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x00000515) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03073368) + stw r5,SD_TIMING(r4) + sync - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync - - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync + + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync - b sdc_init_done + b sdc_init_done check_for_200mhz: - cmpi 0,0,r3,0x0006 - bne set_default_values + cmpi 0,0,r3,0x0006 + bne set_default_values - /* set values for 200Mhz memory speed */ - - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,0x0000061a) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,0x03083348) - stw r5,SD_TIMING(r4) - sync + /* set values for 200Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x0000061a) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03083348) + stw r5,SD_TIMING(r4) + sync - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync - - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync + + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync - b sdc_init_done + b sdc_init_done set_default_values: - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,VAL_SD_REFRESH) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,VAL_SD_TIMING) - stw r5,SD_TIMING(r4) - sync + /* Set refresh rate and timing parameters */ + LOAD_U32(r5,VAL_SD_REFRESH) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,VAL_SD_TIMING) + stw r5,SD_TIMING(r4) + sync - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync - - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync + + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync - + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync #else /* !SDC_HARDCODED_INIT */ - - bl tsi108_sdram_spd /* automatically detect SDC settings */ - + bl tsi108_sdram_spd /* automatically detect SDC settings */ #endif /* SDC_HARDCODED_INIT */ sdc_init_done: #ifdef DISABLE_PBM - LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */ + LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */ #else - LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */ + LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */ #endif /* DISABLE_PBM */ #ifdef CONFIG_TSI108EMU - oris r5,r5,0x0010 /* set EMULATION_MODE bit */ + oris r5,r5,0x0010 /* set EMULATION_MODE bit */ #endif - stw r5,SD_CTRL(r4) - eieio - sync + stw r5,SD_CTRL(r4) + eieio + sync - /* Enable SDRAM access */ + /* Enable SDRAM access */ - oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */ - stw r5,SD_CTRL(r4) - sync + oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */ + stw r5,SD_CTRL(r4) + sync wait_init_complete: - lwz r5,SD_STATUS(r4) - andi. r5,r5,0x0001 - beq wait_init_complete /* wait until SDRAM initialization is complete */ - -/*--------------------------------------------------------------------------- - Map SDRAM into the processor bus address space ----------------------------------------------------------------------------*/ + lwz r5,SD_STATUS(r4) + andi. r5,r5,0x0001 + /* wait until SDRAM initialization is complete */ + beq wait_init_complete - ori r4,r29,TSI108_PB_REG_OFFSET + /* Map SDRAM into the processor bus address space */ - /* Setup BARs associated with direct path PB<->SDRAM */ + ori r4,r29,TSI108_PB_REG_OFFSET - /* PB_SDRAM_BAR1: - provides a direct path to the main system memory (cacheable SDRAM) */ + /* Setup BARs associated with direct path PB<->SDRAM */ - LOAD_U32(r5, 0x00000011) /* BA=0,Size=512MB, ENable, No Addr.Translation */ - stw r5,PB_SDRAM_BAR1(r4) - sync + /* PB_SDRAM_BAR1: + * provides a direct path to the main system memory (cacheable SDRAM) + */ - /* Make sure that PB_SDRAM_BAR1 decoder is set - (to allow following immediate read from SDRAM) */ - lwz r5,PB_SDRAM_BAR1(r4) - sync + /* BA=0,Size=512MB, ENable, No Addr.Translation */ + LOAD_U32(r5, 0x00000011) + stw r5,PB_SDRAM_BAR1(r4) + sync - /* PB_SDRAM_BAR2: - provides non-cacheable alias (via the direct path) to main system memory. - Size = 512MB, ENable, Addr.Translation - ON, - BA = 0x0_40000000, TA = 0x0_00000000 */ + /* Make sure that PB_SDRAM_BAR1 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR1(r4) + sync - LOAD_U32(r5, 0x40010011) - stw r5,PB_SDRAM_BAR2(r4) - sync + /* PB_SDRAM_BAR2: + * provides non-cacheable alias (via the direct path) to main + * system memory. + * Size = 512MB, ENable, Addr.Translation - ON, + * BA = 0x0_40000000, TA = 0x0_00000000 + */ - /* Make sure that PB_SDRAM_BAR2 decoder is set - (to allow following immediate read from SDRAM) */ - lwz r5,PB_SDRAM_BAR2(r4) - sync + LOAD_U32(r5, 0x40010011) + stw r5,PB_SDRAM_BAR2(r4) + sync + /* Make sure that PB_SDRAM_BAR2 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR2(r4) + sync init_done: - /* All done. Restore LR and return. */ - mtlr r19 - blr + /* All done. Restore LR and return. */ + mtlr r19 + blr #if (0) -/*=========================================================================== - init_cpu1 - - This routine enables CPU1 on the dual-processor system. -===========================================================================*/ + /* + * init_cpu1 + * This routine enables CPU1 on the dual-processor system. + * Now there is only one processor in the system + */ - .global enable_cpu1 + .global enable_cpu1 enable_cpu1: - lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */ - addi r3,r3,Tsi108_Base@l - lwz r3,0(r3) /* R3 = CSR Base Addr */ - ori r4,r3,TSI108_PB_REG_OFFSET - lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ - ori r3,r3,0x0200 /* Set M1_EN bit */ - stw r3,PB_ARB_CTRL(r4) + lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */ + addi r3,r3,Tsi108_Base@l + lwz r3,0(r3) /* R3 = CSR Base Addr */ + ori r4,r3,TSI108_PB_REG_OFFSET + lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + ori r3,r3,0x0200 /* Set M1_EN bit */ + stw r3,PB_ARB_CTRL(r4) - blr + blr #endif -/*=========================================================================== - enable_EI - - Enable CPU core external interrupt -===========================================================================*/ + /* + * enable_EI + * Enable CPU core external interrupt + */ - .global enable_EI + .global enable_EI enable_EI: - mfmsr r3 - ori r3,r3,0x8000 /* set EE bit */ - mtmsr r3 - blr - -/*=========================================================================== - disable_EI + mfmsr r3 + ori r3,r3,0x8000 /* set EE bit */ + mtmsr r3 + blr - Disable CPU core external interrupt -===========================================================================*/ + /* + * disable_EI + * Disable CPU core external interrupt + */ - .global disable_EI + .global disable_EI disable_EI: - mfmsr r3 - li r4,-32768 /* aka "li r4,0x8000" */ - andc r3,r3,r4 /* clear EE bit */ - mtmsr r3 - blr + mfmsr r3 + li r4,-32768 /* aka "li r4,0x8000" */ + andc r3,r3,r4 /* clear EE bit */ + mtmsr r3 + blr #ifdef ENABLE_SDRAM_ECC -/*=========================================================================== - enable_ECC + /* enables SDRAM ECC */ - enables SDRAM ECC -===========================================================================*/ - - .global enable_ECC + .global enable_ECC enable_ECC: - ori r4,r29,TSI108_SD_REG_OFFSET - lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */ - ori r3,r3,0x0001 /* Set ECC_EN bit */ - stw r3,SD_ECC_CTRL(r4) - blr - -/*=========================================================================== - clear_ECC_err + ori r4,r29,TSI108_SD_REG_OFFSET + lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */ + ori r3,r3,0x0001 /* Set ECC_EN bit */ + stw r3,SD_ECC_CTRL(r4) + blr - Clears all pending SDRAM ECC errors - (normally after SDRAM scrubbing/initialization) -===========================================================================*/ + /* + * clear_ECC_err + * Clears all pending SDRAM ECC errors + * (normally after SDRAM scrubbing/initialization) + */ - .global clear_ECC_err + .global clear_ECC_err clear_ECC_err: - ori r4,r29,TSI108_SD_REG_OFFSET -/* lwz r3,SD_INT_STATUS(r4) Read SDRAM ECC Control Register */ - ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */ - stw r3,SD_INT_STATUS(r4) - blr + ori r4,r29,TSI108_SD_REG_OFFSET + ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */ + stw r3,SD_INT_STATUS(r4) + blr #endif /* ENABLE_SDRAM_ECC */ #ifndef SDC_HARDCODED_INIT -/******************************************************************** - * SDRAM SPD Support - */ - + /* SDRAM SPD Support */ #define SD_I2C_CTRL1 (0x400) #define SD_I2C_CTRL2 (0x404) #define SD_I2C_RD_DATA (0x408) -#define SD_I2C_WR_DATA (0x40C) +#define SD_I2C_WR_DATA (0x40C) -/* - * SDRAM SPD Support Macros - */ + /* + * SDRAM SPD Support Macros + */ #define SPD_DIMM0 (0x00000100) -#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */ +#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */ #define SPD_RDIMM (0x01) #define SPD_UDIMM (0x02) @@ -651,30 +623,30 @@ clear_ECC_err: * r10 - number of DDR slot where first SPD device is detected */ -#define READ_SPD(byte_num) \ - addis r3, 0, byte_num@l;\ - or r3, r3, r10;\ - ori r3, r3, 0x0A;\ - stw r3, SD_I2C_CTRL1(r4);\ - li r3, I2C_CNTRL2_START;\ - stw r3, SD_I2C_CTRL2(r4);\ - eieio;\ - sync;\ - li r3, 0x100;\ -1: ;\ - addic. r3, r3, -1;\ - bne 1b;\ -2: ;\ - lwz r5, SD_I2C_CTRL2(r4);\ - rlwinm. r3,r5,0,23,23;\ - bne 2b;\ - rlwinm. r3,r5,0,3,3;\ - lwz r3, SD_I2C_RD_DATA(r4) +#define READ_SPD(byte_num) \ + addis r3, 0, byte_num@l; \ + or r3, r3, r10; \ + ori r3, r3, 0x0A; \ + stw r3, SD_I2C_CTRL1(r4); \ + li r3, I2C_CNTRL2_START; \ + stw r3, SD_I2C_CTRL2(r4); \ + eieio; \ + sync; \ + li r3, 0x100; \ +1:; \ + addic. r3, r3, -1; \ + bne 1b; \ +2:; \ + lwz r5, SD_I2C_CTRL2(r4); \ + rlwinm. r3,r5,0,23,23; \ + bne 2b; \ + rlwinm. r3,r5,0,3,3; \ + lwz r3,SD_I2C_RD_DATA(r4) #define SPD_MIN_RFRSH (0x80) #define SPD_MAX_RFRSH (0x85) -refresh_rates: /* in nSec */ +refresh_rates: /* in nSec */ .long 15625 /* Normal (0x80) */ .long 3900 /* Reduced 0.25x (0x81) */ .long 7800 /* Reduced 0.5x (0x82) */ @@ -682,274 +654,265 @@ refresh_rates: /* in nSec */ .long 62500 /* Extended 4x (0x84) */ .long 125000 /* Extended 8x (0x85) */ -/*=========================================================================== +/* * tsi108_sdram_spd * * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data * Uses registers: r4 - SDC base address (not changed) * r9 - SDC clocking period in nSec * Changes registers: r3,r5,r6,r7,r8,r10,r11 - *==========================================================================*/ + */ tsi108_sdram_spd: - li r10,SPD_DIMM0 + li r10,SPD_DIMM0 xor r11,r11,r11 /* DIMM Base Address: starts from 0 */ do_first_dimm: - /************************************** - * Program Refresh Rate Register - */ + /* Program Refresh Rate Register */ + + READ_SPD(12) /* get Refresh Rate */ + beq check_next_slot + li r5, ERR_RFRSH_RATE + cmpi 0,0,r3,SPD_MIN_RFRSH + ble spd_fail + cmpi 0,0,r3,SPD_MAX_RFRSH + bgt spd_fail + addi r3,r3,-SPD_MIN_RFRSH + rlwinm r3,r3,2,0,31 + lis r5,refresh_rates@h + ori r5,r5,refresh_rates@l + lwzx r5,r5,r3 /* get refresh rate in nSec */ + divwu r5,r5,r9 /* calculate # of SDC clocks */ + stw r5,SD_REFRESH(r4) /* Set refresh rate */ + sync - READ_SPD(12) /* get Refresh Rate */ - beq check_next_slot - li r5, ERR_RFRSH_RATE - cmpi 0,0,r3,SPD_MIN_RFRSH - ble spd_fail - cmpi 0,0,r3,SPD_MAX_RFRSH - bgt spd_fail - addi r3,r3,-SPD_MIN_RFRSH - rlwinm r3,r3,2,0,31 - lis r5,refresh_rates@h - ori r5,r5,refresh_rates@l - lwzx r5,r5,r3 /* get refresh rate in nSec */ - divwu r5,r5,r9 /* calculate # of SDC clocks */ - stw r5,SD_REFRESH(r4) /* Set refresh rate */ - sync - - /************************************** - * Program SD Timing Register - */ + /* Program SD Timing Register */ - li r7, 0 /* clear r7 prior parameter collection */ + li r7, 0 /* clear r7 prior parameter collection */ - READ_SPD(20) /* get DIMM type: Registered or Unbuffered */ + READ_SPD(20) /* get DIMM type: Registered or Unbuffered */ beq spd_read_fail - li r5, ERR_DIMM_TYPE - cmpi 0,0,r3,SPD_UDIMM - beq do_cl - cmpi 0,0,r3,SPD_RDIMM - bne spd_fail - oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */ + li r5, ERR_DIMM_TYPE + cmpi 0,0,r3,SPD_UDIMM + beq do_cl + cmpi 0,0,r3,SPD_RDIMM + bne spd_fail + oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */ do_cl: - READ_SPD(18) /* Get CAS Latency */ + READ_SPD(18) /* Get CAS Latency */ beq spd_read_fail - li r5,ERR_CL_VALUE - andi. r6,r3,SPD_CAS_3 - beq cl_4 - li r6,3 - b set_cl + li r5,ERR_CL_VALUE + andi. r6,r3,SPD_CAS_3 + beq cl_4 + li r6,3 + b set_cl cl_4: - andi. r6,r3,SPD_CAS_4 - beq cl_5 - li r6,4 - b set_cl + andi. r6,r3,SPD_CAS_4 + beq cl_5 + li r6,4 + b set_cl cl_5: - andi. r6,r3,SPD_CAS_5 - beq spd_fail - li r6,5 + andi. r6,r3,SPD_CAS_5 + beq spd_fail + li r6,5 set_cl: - rlwimi r7,r6,24,5,7 + rlwimi r7,r6,24,5,7 - READ_SPD(30) /* Get tRAS */ + READ_SPD(30) /* Get tRAS */ beq spd_read_fail - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_tras - addi r6,r6,1 + addi r6,r6,1 set_tras: li r5,ERR_TRAS_FAIL - cmpi 0,0,r6,0x0F /* max supported value */ - bgt spd_fail - rlwimi r7,r6,16,12,15 + cmpi 0,0,r6,0x0F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,16,12,15 READ_SPD(29) /* Get tRCD */ beq spd_read_fail - rlwinm r3,r3,30,2,31/* right shift tRCD by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + /* right shift tRCD by 2 bits as per DDR2 spec */ + rlwinm r3,r3,30,2,31 + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trcd - addi r6,r6,1 + addi r6,r6,1 set_trcd: - li r5,ERR_TRCD_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,12,17,19 + li r5,ERR_TRCD_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,12,17,19 READ_SPD(27) /* Get tRP value */ beq spd_read_fail - rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trp - addi r6,r6,1 + addi r6,r6,1 set_trp: - li r5,ERR_TRP_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,8,21,23 + li r5,ERR_TRP_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,8,21,23 READ_SPD(36) /* Get tWR value */ beq spd_read_fail - rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_twr - addi r6,r6,1 + addi r6,r6,1 set_twr: - addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */ - li r5,ERR_TWR_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,5,24,26 + addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */ + li r5,ERR_TWR_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,5,24,26 READ_SPD(42) /* Get tRFC */ beq spd_read_fail - li r5, ERR_TRFC_FAIL + li r5, ERR_TRFC_FAIL /* Tsi108 spec: tRFC=(tRFC + 1)/2 */ - addi r3,r3,1 - rlwinm. r3,r3,31,1,31 /* divide by 2 */ - beq spd_fail - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + addi r3,r3,1 + rlwinm. r3,r3,31,1,31 /* divide by 2 */ + beq spd_fail + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trfc - addi r6,r6,1 + addi r6,r6,1 set_trfc: - cmpi 0,0,r6,0x1F /* max supported value */ - bgt spd_fail - rlwimi r7,r6,0,27,31 + cmpi 0,0,r6,0x1F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,0,27,31 stw r7,SD_TIMING(r4) sync - /*===================================================================== + /* * The following two registers are set on per-DIMM basis. * The SD_REFRESH and SD_TIMING settings are common for both DIMMS - *===================================================================== */ do_each_dimm: - /***************************************** - * Program SDRAM DIMM Control Register - */ + /* Program SDRAM DIMM Control Register */ - li r7, 0 /* clear r7 prior parameter collection */ + li r7, 0 /* clear r7 prior parameter collection */ READ_SPD(13) /* Get Primary SDRAM Width */ beq spd_read_fail - cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */ - beq do_nbank - oris r7,r7,0x0010 /* Set MEM_WIDTH bit */ + cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */ + beq do_nbank + oris r7,r7,0x0010 /* Set MEM_WIDTH bit */ do_nbank: READ_SPD(17) /* Get Number of banks on SDRAM device */ beq spd_read_fail /* Grendel only distinguish betw. 4 or 8-bank memory parts */ - li r5,ERR_UNKNOWN_PART /* non-supported memory part */ - cmpi 0,0,r3,4 - beq do_nrank - cmpi 0,0,r3,8 - bne spd_fail - ori r7,r7,0x1000 + li r5,ERR_UNKNOWN_PART /* non-supported memory part */ + cmpi 0,0,r3,4 + beq do_nrank + cmpi 0,0,r3,8 + bne spd_fail + ori r7,r7,0x1000 do_nrank: - READ_SPD(5) /* Get # of Ranks */ + READ_SPD(5) /* Get # of Ranks */ beq spd_read_fail - li r5,ERR_NRANK_INVALID - andi. r6,r3,0x7 /* Use bits [2..0] only */ - beq do_addr_mode - cmpi 0,0,r6,1 - bgt spd_fail - rlwimi r7,r6,8,23,23 + li r5,ERR_NRANK_INVALID + andi. r6,r3,0x7 /* Use bits [2..0] only */ + beq do_addr_mode + cmpi 0,0,r6,1 + bgt spd_fail + rlwimi r7,r6,8,23,23 do_addr_mode: - READ_SPD(4) /* Get # of Column Addresses */ + READ_SPD(4) /* Get # of Column Addresses */ beq spd_read_fail - li r5, ERR_ADDR_MODE - andi. r3,r3,0x0f /* cut off reserved bits */ - cmpi 0,0,r3,8 - ble spd_fail - cmpi 0,0,r3,15 - bgt spd_fail - addi r6,r3,-8 /* calculate ADDR_MODE parameter */ - rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */ + li r5, ERR_ADDR_MODE + andi. r3,r3,0x0f /* cut off reserved bits */ + cmpi 0,0,r3,8 + ble spd_fail + cmpi 0,0,r3,15 + bgt spd_fail + addi r6,r3,-8 /* calculate ADDR_MODE parameter */ + rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */ set_dimm_ctrl: #ifdef SDC_AUTOPRECH_EN - oris r7,r7,0x0001 /* set auto precharge EN bit */ + oris r7,r7,0x0001 /* set auto precharge EN bit */ #endif - ori r7,r7,1 /* set ENABLE bit */ - cmpi 0,0,r10,SPD_DIMM0 - bne 1f - stw r7,SD_D0_CTRL(r4) + ori r7,r7,1 /* set ENABLE bit */ + cmpi 0,0,r10,SPD_DIMM0 + bne 1f + stw r7,SD_D0_CTRL(r4) sync - b set_dimm_bar + b set_dimm_bar 1: - stw r7,SD_D1_CTRL(r4) + stw r7,SD_D1_CTRL(r4) sync - /******************************************** - * Program SDRAM DIMMx Base Address Register - */ + /* Program SDRAM DIMMx Base Address Register */ set_dimm_bar: READ_SPD(5) /* get # of Ranks */ beq spd_read_fail - andi.r7,r3,0x7 - addi r7,r7,1 - READ_SPD(31) /* Read DIMM rank density */ + andi. r7,r3,0x7 + addi r7,r7,1 + READ_SPD(31) /* Read DIMM rank density */ beq spd_read_fail - rlwinm r5,r3,27,29,31 - rlwinm r6,r3,3,24,28 - or r5,r6,r5 /* r5 = Normalized Rank Density byte */ - lis r8, 0x0080 /* 128MB >> 4 */ - mullw r8,r8,r5 /* r8 = (rank_size >> 4) */ - mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */ - neg r7,r8 - rlwinm r7,r7,28,4,31 - or r7,r7,r11 /* set ADDR field */ - rlwinm r8,r8,12,20,31 - add r11,r11,r8 /* set Base Addr for next DIMM */ - - cmpi 0,0,r10,SPD_DIMM0 - bne set_dimm1_size - stw r7,SD_D0_BAR(r4) - sync - li r10,SPD_DIMM1 + rlwinm r5,r3,27,29,31 + rlwinm r6,r3,3,24,28 + or r5,r6,r5 /* r5 = Normalized Rank Density byte */ + lis r8, 0x0080 /* 128MB >> 4 */ + mullw r8,r8,r5 /* r8 = (rank_size >> 4) */ + mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */ + neg r7,r8 + rlwinm r7,r7,28,4,31 + or r7,r7,r11 /* set ADDR field */ + rlwinm r8,r8,12,20,31 + add r11,r11,r8 /* set Base Addr for next DIMM */ + + cmpi 0,0,r10,SPD_DIMM0 + bne set_dimm1_size + stw r7,SD_D0_BAR(r4) + sync + li r10,SPD_DIMM1 READ_SPD(0) bne do_each_dimm b spd_done set_dimm1_size: - stw r7,SD_D1_BAR(r4) + stw r7,SD_D1_BAR(r4) sync spd_done: blr check_next_slot: - cmpi 0,0,r10,SPD_DIMM1 - beq spd_read_fail - li r10,SPD_DIMM1 - b do_first_dimm + cmpi 0,0,r10,SPD_DIMM1 + beq spd_read_fail + li r10,SPD_DIMM1 + b do_first_dimm spd_read_fail: ori r3,r0,0xdead - b err_hung + b err_hung spd_fail: li r3,0x0bad sync -err_hung: /* hang here for debugging */ - nop - nop - b err_hung +err_hung: /* hang here for debugging */ + nop + nop + b err_hung #endif /* !SDC_HARDCODED_INIT */ - diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c index f90a751..4d221e7 100644 --- a/board/mpc7448hpc2/mpc7448hpc2.c +++ b/board/mpc7448hpc2/mpc7448hpc2.c @@ -25,7 +25,7 @@ */ /* - * board support/init functions for the + * board support/init functions for the * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform). */ @@ -33,39 +33,38 @@ #include <74xx_7xx.h> #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> -extern void ft_cpu_setup(void *blob, bd_t *bd); +extern void ft_cpu_setup (void *blob, bd_t *bd); #endif #undef DEBUG -extern void flush_data_cache(void); -extern void invalidate_l1_instruction_cache(void); -extern void tsi108_init_f(void); +extern void flush_data_cache (void); +extern void invalidate_l1_instruction_cache (void); +extern void tsi108_init_f (void); -int display_mem_map(void); +int display_mem_map (void); -void after_reloc(ulong dest_addr) +void after_reloc (ulong dest_addr) { DECLARE_GLOBAL_DATA_PTR; /* * Jump to the main U-Boot board init code */ - board_init_r((gd_t *) gd, dest_addr); + board_init_r ((gd_t *) gd, dest_addr); /* NOTREACHED */ } /* * Check Board Identity: - * * report board type */ -int checkboard(void) +int checkboard (void) { int l_type = 0; - printf("BOARD: %s\n", CFG_BOARD_NAME); + printf ("BOARD: %s\n", CFG_BOARD_NAME); return (l_type); } @@ -75,19 +74,19 @@ int checkboard(void) * report calling processor number */ -int read_pid(void) +int read_pid (void) { return 0; /* we are on single CPU platform for a while */ } -long int dram_size(int board_type) +long int dram_size (int board_type) { return 0x20000000; /* 256M bytes */ } -long int initdram(int board_type) +long int initdram (int board_type) { - return dram_size(board_type); + return dram_size (board_type); } /* DRAM check routines copied from gw8260 */ @@ -114,11 +113,11 @@ long int initdram(int board_type) /* May cloober fr0. */ /* */ /*********************************************************************/ -static void move64(unsigned long long *src, unsigned long long *dest) +static void move64 (unsigned long long *src, unsigned long long *dest) { - asm("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ - "stfd 0, 0(4)" /* *dest = fpr0 */ - : : :"fr0"); /* Clobbers fr0 */ + asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ + "stfd 0, 0(4)" /* *dest = fpr0 */ + : : :"fr0"); /* Clobbers fr0 */ return; } @@ -183,28 +182,28 @@ unsigned long long pattern[] = { /* Assumes only one one SDRAM bank */ /* */ /*********************************************************************/ -int mem_test_data(void) +int mem_test_data (void) { unsigned long long *pmem = (unsigned long long *)CFG_MEMTEST_START; unsigned long long temp64; - int num_patterns = sizeof(pattern) / sizeof(pattern[0]); + int num_patterns = sizeof (pattern) / sizeof (pattern[0]); int i; unsigned int hi, lo; for (i = 0; i < num_patterns; i++) { - move64(&(pattern[i]), pmem); - move64(pmem, &temp64); + move64 (&(pattern[i]), pmem); + move64 (pmem, &temp64); - /* hi = (temp64>>32) & 0xffffffff; */ - /* lo = temp64 & 0xffffffff; */ - /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ + /* hi = (temp64>>32) & 0xffffffff; */ + /* lo = temp64 & 0xffffffff; */ + /* printf ("\ntemp64 = 0x%08x%08x", hi, lo); */ hi = (pattern[i] >> 32) & 0xffffffff; lo = pattern[i] & 0xffffffff; - /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ + /* printf ("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ if (temp64 != pattern[i]) { - printf("\n Data Test Failed, pattern 0x%08x%08x", + printf ("\n Data Test Failed, pattern 0x%08x%08x", hi, lo); return 1; } @@ -236,7 +235,7 @@ int mem_test_data(void) /* */ /* */ /*********************************************************************/ -int mem_test_address(void) +int mem_test_address (void) { volatile unsigned int *pmem = (volatile unsigned int *)CFG_MEMTEST_START; @@ -251,13 +250,13 @@ int mem_test_address(void) /* verify each loaction */ for (i = 0; i < size; i++) { if (pmem[i] != i) { - printf("\n Address Test Failed at 0x%x", i); + printf ("\n Address Test Failed at 0x%x", i); return 1; } } return 0; } -#endif /* CFG_DRAM_TEST_ADDRESS */ +#endif /* CFG_DRAM_TEST_ADDRESS */ #if defined (CFG_DRAM_TEST_WALK) /*********************************************************************/ @@ -287,7 +286,7 @@ int mem_test_address(void) /* */ /* */ /*********************************************************************/ -int mem_march(volatile unsigned long long *base, +int mem_march (volatile unsigned long long *base, unsigned int size, unsigned long long rmask, unsigned long long wmask, short read, short write) @@ -299,14 +298,14 @@ int mem_march(volatile unsigned long long *base, for (i = 0; i < size; i++) { if (read != 0) { /* temp = base[i]; */ - move64((unsigned long long *)&(base[i]), &temp); + move64 ((unsigned long long *)&(base[i]), &temp); if (rmask != temp) { hitemp = (temp >> 32) & 0xffffffff; lotemp = temp & 0xffffffff; himask = (rmask >> 32) & 0xffffffff; lomask = rmask & 0xffffffff; - printf("\n Walking one's test failed: \ + printf ("\n Walking one's test failed: \ address = 0x%08x," "\n\texpected \ 0x%08x%08x, found 0x%08x%08x", i << 3,\ himask, lomask, hitemp, lotemp); @@ -315,12 +314,12 @@ int mem_march(volatile unsigned long long *base, } if (write != 0) { /* base[i] = wmask; */ - move64(&wmask, (unsigned long long *)&(base[i])); + move64 (&wmask, (unsigned long long *)&(base[i])); } } return 0; } -#endif /* CFG_DRAM_TEST_WALK */ +#endif /* CFG_DRAM_TEST_WALK */ /*********************************************************************/ /* NAME: mem_test_walk() - a simple walking ones test */ @@ -348,7 +347,7 @@ int mem_march(volatile unsigned long long *base, /* */ /* */ /*********************************************************************/ -int mem_test_walk(void) +int mem_test_walk (void) { unsigned long long mask; volatile unsigned long long *pmem = @@ -359,32 +358,31 @@ int mem_test_walk(void) mask = 0x01; - printf("Initial Pass"); - mem_march(pmem, size, 0x0, 0x1, 0, 1); + printf ("Initial Pass"); + mem_march (pmem, size, 0x0, 0x1, 0, 1); - printf("\b\b\b\b\b\b\b\b\b\b\b\b"); - printf(" "); - printf(" "); - printf("\b\b\b\b\b\b\b\b\b\b\b\b"); + printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); + printf (" "); + printf (" "); + printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); for (i = 0; i < 63; i++) { - printf("Pass %2d", i + 2); - if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0) { - /*printf("mask: 0x%x, pass: %d, ", mask, i); */ + printf ("Pass %2d", i + 2); + if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0) + /*printf ("mask: 0x%x, pass: %d, ", mask, i); */ return 1; - } mask = mask << 1; - printf("\b\b\b\b\b\b\b"); + printf ("\b\b\b\b\b\b\b"); } - printf("Last Pass"); + printf ("Last Pass"); if (mem_march(pmem, size, 0, mask, 0, 1) != 0) { - /* printf("mask: 0x%x", mask); */ + /* printf ("mask: 0x%x", mask); */ return 1; } - printf("\b\b\b\b\b\b\b\b\b"); - printf(" "); - printf("\b\b\b\b\b\b\b\b\b"); + printf ("\b\b\b\b\b\b\b\b\b"); + printf (" "); + printf ("\b\b\b\b\b\b\b\b\b"); return 0; } @@ -412,60 +410,58 @@ int mem_test_walk(void) /* */ /* */ /*********************************************************************/ -int testdram(void) +int testdram (void) { char *s; int rundata, runaddress, runwalk; - s = getenv("testdramdata"); + s = getenv ("testdramdata"); rundata = (s && (*s == 'y')) ? 1 : 0; - s = getenv("testdramaddress"); + s = getenv ("testdramaddress"); runaddress = (s && (*s == 'y')) ? 1 : 0; - s = getenv("testdramwalk"); + s = getenv ("testdramwalk"); runwalk = (s && (*s == 'y')) ? 1 : 0; /* rundata = 1; */ /* runaddress = 0; */ /* runwalk = 0; */ - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { - printf("Testing RAM from 0x%08x to 0x%08x ... \ + if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) + printf ("Testing RAM from 0x%08x to 0x%08x ... \ (don't panic... that will take a moment !!!!)\n", \ CFG_MEMTEST_START, CFG_MEMTEST_END); - } #ifdef CFG_DRAM_TEST_DATA if (rundata == 1) { - printf("Test DATA ... "); + printf ("Test DATA ... "); if (mem_test_data () == 1) { - printf("failed \n"); + printf ("failed \n"); return 1; } else - printf("ok \n"); + printf ("ok \n"); } #endif #ifdef CFG_DRAM_TEST_ADDRESS if (runaddress == 1) { - printf("Test ADDRESS ... "); + printf ("Test ADDRESS ... "); if (mem_test_address () == 1) { - printf("failed \n"); + printf ("failed \n"); return 1; } else - printf("ok \n"); + printf ("ok \n"); } #endif #ifdef CFG_DRAM_TEST_WALK if (runwalk == 1) { - printf("Test WALKING ONEs ... "); - if (mem_test_walk() == 1) { - printf("failed \n"); + printf ("Test WALKING ONEs ... "); + if (mem_test_walk () == 1) { + printf ("failed \n"); return 1; } else - printf("ok \n"); + printf ("ok \n"); } #endif - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { - printf("passed\n"); - } + if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) + printf ("passed\n"); return 0; } @@ -473,17 +469,17 @@ int testdram(void) #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) void -ft_board_setup(void *blob, bd_t *bd) +ft_board_setup (void *blob, bd_t *bd) { u32 *p; int len; - ft_cpu_setup(blob, bd); + ft_cpu_setup (blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); + p = ft_get_prop (blob, "/memory/reg", &len); if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); + *p++ = cpu_to_be32 (bd->bi_memstart); + *p = cpu_to_be32 (bd->bi_memsize); } } #endif diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c index 6f517f5..fdb5365 100644 --- a/board/mpc7448hpc2/tsi108_init.c +++ b/board/mpc7448hpc2/tsi108_init.c @@ -1,6 +1,6 @@ /***************************************************************************** * (C) Copyright 2003; Tundra Semiconductor Corp. - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -33,7 +33,7 @@ #include <asm/processor.h> #include <tsi108.h> -extern void mpicInit(int verbose); +extern void mpicInit (int verbose); /* * Configuration Options @@ -118,11 +118,11 @@ static PLL_CTRL_SET pll0_config[8] = { static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 }; /* - * get_board_bus_clk() + * get_board_bus_clk () * * returns the bus clock in Hz. */ -unsigned long get_board_bus_clk(void) +unsigned long get_board_bus_clk (void) { ulong i; @@ -134,37 +134,38 @@ unsigned long get_board_bus_clk(void) } /* - * board_early_init_f() + * board_early_init_f () * * board-specific initialization executed from flash */ -int board_early_init_f(void) +int board_early_init_f (void) { DECLARE_GLOBAL_DATA_PTR; ulong i; gd->mem_clk = 0; - i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); - i = (i >> 20) & 0x07; + i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + + CG_PWRUP_STATUS); + i = (i >> 20) & 0x07; /* value of SW4[4:7] */ switch (i) { - case 0: - printf("Using external clock\n"); + case 0: /* external clock */ + printf ("Using external clock\n"); break; - case 1: + case 1: /* system clock */ gd->mem_clk = gd->bus_clk; break; - case 4: - case 5: - case 6: + case 4: /* 133 MHz */ + case 5: /* 166 MHz */ + case 6: /* 200 MHz */ gd->mem_clk = pb_clk_sel[i] * 1000000; break; default: - printf("Invalid DDR2 clock setting\n"); + printf ("Invalid DDR2 clock setting\n"); return -1; } - printf("BUS! %d MHz\n", get_board_bus_clk() / 1000000); - printf("MEM! %d MHz\n", gd->mem_clk / 1000000); + printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000); + printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); return 0; } @@ -173,175 +174,174 @@ int board_early_init_f(void) * relocation. Contains code that cannot be executed from flash. */ -int board_early_init_r(void) +int board_early_init_r (void) { ulong temp, i; ulong reg_val; volatile ulong *reg_ptr; reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900); for (i = 0; i < 32; i++) { *reg_ptr++ = 0x00000201; /* SWAP ENABLED */ *reg_ptr++ = 0x00; } - __asm__ __volatile__("eieio"); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */ - out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2, - 0x80000001); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2, + 0x80000001); + __asm__ __volatile__ ("sync"); /* Make sure that OCN_BAR2 decoder is set (to allow following immediate - * read from SDRAM) + * read from SDRAM) */ temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("sync"); /* * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the * processor bus address space. Immediately after reset LUT and address * translation are disabled for this BAR. Now we have to initialize LUT * and switch from the BOOT mode to the normal operation mode. - * + * * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000 - * and covers 512MB of address space. To allow larger aperture we also + * and covers 512MB of address space. To allow larger aperture we also * have to relocate register window of Tsi108 * - * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT + * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT * mode. - * + * * initialize pointer to LUT associated with PB_OCN_BAR1 */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800); for (i = 0; i < 32; i++) { *reg_ptr++ = pb2ocn_lut1[i].lower; *reg_ptr++ = pb2ocn_lut1[i].upper; } - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("sync"); /* Base addresses for Cs0, CS1, CS2, CS3 */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, - 0x00000000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, + 0x00000000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR, - 0x00100000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR, + 0x00100000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR, - 0x00200000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR, + 0x00200000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR, - 0x00300000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR, + 0x00300000); + __asm__ __volatile__ ("sync"); /* Masks for HLP banks */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); /* Set CTRL0 values for banks */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0, - 0x7FFC44C2); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0, + 0x7FFC44C2); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0, - 0x7FFC44C0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0, + 0x7FFC44C0); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0, - 0x7FFC44C0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0, + 0x7FFC44C0); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0, - 0x7FFC44C2); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0, + 0x7FFC44C2); + __asm__ __volatile__ ("sync"); /* Set banks to latched mode, enabled, and other default settings */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); /* * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode. * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1, - 0xE0000011); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1, + 0xE0000011); + __asm__ __volatile__ ("sync"); - /* Make sure that OCN_BAR2 decoder is set (to allow following - * immediate read from SDRAM) + /* Make sure that OCN_BAR2 decoder is set (to allow following + * immediate read from SDRAM) */ - + temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("sync"); /* * SRI: At this point we have enabled the HLP banks. That means we can * now read from the NVRAM and initialize the environment variables. * We will over-ride the env_init called in board_init_f * This is really a work-around because, the HLP bank 1 - * where NVRAM resides is not visible during board_init_f + * where NVRAM resides is not visible during board_init_f * (lib_ppc/board.c) * Alternatively, we could use the I2C EEPROM at start-up to configure * and enable all HLP banks and not just HLP 0 as is being done for * Taiga Rev. 2. */ - env_init(); + env_init (); #ifndef DISABLE_PBM /* - * For IBM processors we have to set Address-Only commands generated + * For IBM processors we have to set Address-Only commands generated * by PBM that are different from ones set after reset. */ - temp = get_cpu_type(); + temp = get_cpu_type (); - if ((CPU_750FX == temp) || (CPU_750GX == temp)) { - out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD, - 0x00009955); - } + if ((CPU_750FX == temp) || (CPU_750GX == temp)) + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD, + 0x00009955); #endif /* DISABLE_PBM */ #ifdef CONFIG_PCI @@ -350,42 +350,42 @@ int board_early_init_r(void) */ /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0_UPPER, - 0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + PCI_PFAB_BAR0_UPPER, 0); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0, - 0xFB000001); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0, + 0xFB000001); + __asm__ __volatile__ ("sync"); /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */ - temp = - in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT); + temp = in32(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT); temp &= ~0xFF00; /* Clear the BUS_NUM field */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT, - temp); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT, + temp); /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER, - 0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER, + 0); + __asm__ __volatile__ ("sync"); /* This register is on the PCI side to interpret the address it receives - * and maps it as a IO address. + * and maps it as a IO address. */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO, - 0xFA000001); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO, + 0xFA000001); + __asm__ __volatile__ ("sync"); /* * Map PCI/X Memory Space * - * Transactions directed from OCM to PCI Memory Space are directed + * Transactions directed from OCM to PCI Memory Space are directed * from PB to PCI * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings). * If address remapping is required the corresponding PCI_PFAB_MEM32 @@ -393,7 +393,7 @@ int board_early_init_r(void) * * Map the path from the PCI/X bus into the system memory * - * The memory mapped window assotiated with PCI P2O_BAR2 provides + * The memory mapped window assotiated with PCI P2O_BAR2 provides * access to the system memory without address remapping. * All system memory is opened for accesses initiated by PCI/X bus * masters. @@ -404,13 +404,13 @@ int board_early_init_r(void) */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500); #ifdef DISABLE_PBM - /* In case when PBM is disabled (no HW supported cache snoopng on PB) - * P2O_BAR2 is directly mapped into the system memory without address - * translation. + /* In case when PBM is disabled (no HW supported cache snoopng on PB) + * P2O_BAR2 is directly mapped into the system memory without address + * translation. */ reg_val = 0x00000004; /* SDRAM port + NO Addr_Translation */ @@ -438,30 +438,30 @@ int board_early_init_r(void) reg_val = 0x00007100; #endif - __asm__ __volatile__("eieio"); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, - reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + reg_val); + __asm__ __volatile__ ("sync"); - /* Set 64-bit PCI bus address for system memory - * ( 0 is the best choice for easy mapping) + /* Set 64-bit PCI bus address for system memory + * ( 0 is the best choice for easy mapping) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2, - 0x00000000); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER, - 0x00000000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER, + 0x00000000); + __asm__ __volatile__ ("sync"); #ifndef DISABLE_PBM /* - * The memory mapped window assotiated with PCI P2O_BAR3 provides - * access to the system memory using SDRAM OCN port and address - * translation. This is alternative way to access SDRAM from PCI + * The memory mapped window assotiated with PCI P2O_BAR3 provides + * access to the system memory using SDRAM OCN port and address + * translation. This is alternative way to access SDRAM from PCI * required for Tsi108 emulation testing. - * All system memory is opened for accesses initiated by + * All system memory is opened for accesses initiated by * PCI/X bus masters. * * Initialize LUT associated with PCI P2O_BAR3 @@ -469,7 +469,7 @@ int board_early_init_r(void) * set pointer to LUT associated with PCI P2O_BAR3 */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600); reg_val = 0x00000004; /* Destination port = SDC */ @@ -483,45 +483,45 @@ int board_early_init_r(void) reg_val += 0x01000000; } - __asm__ __volatile__("eieio"); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */ reg_val = - in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES); reg_val &= ~0x00FF; reg_val |= 0x0071; - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, - reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + reg_val); + __asm__ __volatile__ ("sync"); /* Set 64-bit base PCI bus address for window (0x20000000) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER, - 0x00000000); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3, - 0x20000000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3, + 0x20000000); + __asm__ __volatile__ ("sync"); #endif /* !DISABLE_PBM */ #ifdef ENABLE_PCI_CSR_BAR /* open if required access to Tsi108 CSRs from the PCI/X bus */ /* enable BAR0 on the PCI/X bus */ - reg_val = - in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR); + reg_val = in32(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR); reg_val |= 0x02; - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR, - reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR, + reg_val); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER, - 0x00000000); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0, - CFG_TSI108_CSR_BASE); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0, + CFG_TSI108_CSR_BASE); + __asm__ __volatile__ ("sync"); #endif @@ -531,32 +531,32 @@ int board_early_init_r(void) reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR); reg_val |= 0x06; - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val); + __asm__ __volatile__ ("sync"); #endif /* CONFIG_PCI */ /* * Initialize MPIC outputs (interrupt pins): * Interrupt routing on the Grendel Emul. Board: - * PB_INT[0] -> INT (CPU0) - * PB_INT[1] -> INT (CPU1) - * PB_INT[2] -> MCP (CPU0) - * PB_INT[3] -> MCP (CPU1) + * PB_INT[0] -> INT (CPU0) + * PB_INT[1] -> INT (CPU1) + * PB_INT[2] -> MCP (CPU0) + * PB_INT[3] -> MCP (CPU1) * Set interrupt controller outputs as Level_Sensitive/Active_Low */ - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02); - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02); - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02); - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02); + __asm__ __volatile__ ("sync"); /* * Ensure that Machine Check exception is enabled * We need it to support PCI Bus probing (configuration reads) */ - reg_val = mfmsr(); + reg_val = mfmsr (); mtmsr(reg_val | MSR_ME); return 0; @@ -567,7 +567,7 @@ int board_early_init_r(void) * used in the misc_init_r function */ -unsigned long get_l2cr(void) +unsigned long get_l2cr (void) { unsigned long l2controlreg; asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):); @@ -581,79 +581,82 @@ unsigned long get_l2cr(void) * */ -int misc_init_r(void) +int misc_init_r (void) { DECLARE_GLOBAL_DATA_PTR; #ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */ ulong i; /* Ensure that Spread-Spectrum is disabled */ - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0); - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0); /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5% */ - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x002e0044); /* D = 0.25% */ - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, 0x00000039); /* BWADJ */ + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + 0x002e0044); /* D = 0.25% */ + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, + 0x00000039); /* BWADJ */ /* Initialize PLL0: CG_PB_CLKO */ /* Detect PB clock freq. */ i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); i = (i >> 16) & 0x07; /* Get PB PLL multiplier */ - out32(CFG_TSI108_CSR_BASE + - TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0); - out32(CFG_TSI108_CSR_BASE + - TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1); + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0); + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1); /* Wait and set SSEN for both PLL0 and 1 */ - udelay(1000); - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x802e0044); /* D=0.25% */ - out32(CFG_TSI108_CSR_BASE + - TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, - 0x80000000 | pll0_config[i].ctrl0); + udelay (1000); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + 0x802e0044); /* D=0.25% */ + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, + 0x80000000 | pll0_config[i].ctrl0); #endif /* CFG_CLK_SPREAD */ #ifdef CFG_L2 - l2cache_enable(); + l2cache_enable (); #endif - printf("BUS: %d MHz\n", gd->bus_clk / 1000000); - printf("MEM: %d MHz\n", gd->mem_clk / 1000000); + printf ("BUS: %d MHz\n", gd->bus_clk / 1000000); + printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); /* - * All the information needed to print the cache details is avaiblable - * at this point i.e. above call to l2cache_enable is the very last - * thing done with regards to enabling diabling the cache. + * All the information needed to print the cache details is avaiblable + * at this point i.e. above call to l2cache_enable is the very last + * thing done with regards to enabling diabling the cache. * So this seems like a good place to print all this information */ - printf("CACHE: "); + printf ("CACHE: "); switch (get_cpu_type()) { case CPU_7447A: - printf("L1 Instruction cache - 32KB 8-way"); - (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" L1 Data cache - 32KB 8-way"); - (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" Unified L2 cache - 512KB 8-way"); - (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf("\n"); + printf ("L1 Instruction cache - 32KB 8-way"); + (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("L1 Data cache - 32KB 8-way"); + (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("Unified L2 cache - 512KB 8-way"); + (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("\n"); break; case CPU_7448: - printf("L1 Instruction cache - 32KB 8-way"); - (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" L1 Data cache - 32KB 8-way"); - (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" Unified L2 cache - 1MB 8-way"); - (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); + printf ("L1 Instruction cache - 32KB 8-way"); + (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("L1 Data cache - 32KB 8-way"); + (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("Unified L2 cache - 1MB 8-way"); + (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); break; default: break; |