Initial revision

1 files changed, 190 insertions, 0 deletions

diff --git a/board/mpl/common/usb_uhci.h b/board/mpl/common/usb_uhci.h
new file mode 100644
index 0000000..8c8f161
--- /dev/null
+++ b/board/mpl/common/usb_uhci.h
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: Part of this code has been derived from linux
+ *
+ */
+#ifndef _USB_UHCI_H_
+#define _USB_UHCI_H_
+
+
+/* Command register */
+#define USBCMD		0
+#define   USBCMD_RS       0x0001	/* Run/Stop */
+#define   USBCMD_HCRESET  0x0002	/* Host reset */
+#define   USBCMD_GRESET   0x0004	/* Global reset */
+#define   USBCMD_EGSM     0x0008	/* Global Suspend Mode */
+#define   USBCMD_FGR      0x0010	/* Force Global Resume */
+#define   USBCMD_SWDBG    0x0020	/* SW Debug mode */
+#define   USBCMD_CF       0x0040	/* Config Flag (sw only) */
+#define   USBCMD_MAXP     0x0080	/* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS		2
+#define   USBSTS_USBINT   0x0001	/* Interrupt due to IOC */
+#define   USBSTS_ERROR    0x0002	/* Interrupt due to error */
+#define   USBSTS_RD       0x0004	/* Resume Detect */
+#define   USBSTS_HSE      0x0008	/* Host System Error - basically PCI problems */
+#define   USBSTS_HCPE     0x0010	/* Host Controller Process Error - the scripts were buggy */
+#define   USBSTS_HCH      0x0020	/* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR		4
+#define   USBINTR_TIMEOUT 0x0001	/* Timeout/CRC error enable */
+#define   USBINTR_RESUME  0x0002	/* Resume interrupt enable */
+#define   USBINTR_IOC     0x0004	/* Interrupt On Complete enable */
+#define   USBINTR_SP      0x0008	/* Short packet interrupt enable */
+
+#define USBFRNUM      6
+#define USBFLBASEADD  8
+#define USBSOF        12
+
+/* USB port status and control registers */
+#define USBPORTSC1	16
+#define USBPORTSC2	18
+#define   USBPORTSC_CCS   0x0001	/* Current Connect Status ("device present") */
+#define   USBPORTSC_CSC   0x0002	/* Connect Status Change */
+#define   USBPORTSC_PE    0x0004	/* Port Enable */
+#define   USBPORTSC_PEC   0x0008	/* Port Enable Change */
+#define   USBPORTSC_LS    0x0030	/* Line Status */
+#define   USBPORTSC_RD    0x0040	/* Resume Detect */
+#define   USBPORTSC_LSDA  0x0100	/* Low Speed Device Attached */
+#define   USBPORTSC_PR    0x0200	/* Port Reset */
+#define   USBPORTSC_SUSP  0x1000	/* Suspend */
+
+/* Legacy support register */
+#define USBLEGSUP 0xc0
+#define USBLEGSUP_DEFAULT 0x2000	/* only PIRQ enable set */
+
+#define UHCI_NULL_DATA_SIZE 0x7ff	/* for UHCI controller TD */
+#define UHCI_PID            0xff	/* PID MASK */
+
+#define UHCI_PTR_BITS       0x000F
+#define UHCI_PTR_TERM       0x0001
+#define UHCI_PTR_QH         0x0002
+#define UHCI_PTR_DEPTH      0x0004
+
+/* for TD <status>: */
+#define TD_CTRL_SPD         (1 << 29)	/* Short Packet Detect */
+#define TD_CTRL_C_ERR_MASK  (3 << 27)	/* Error Counter bits */
+#define TD_CTRL_LS          (1 << 26)	/* Low Speed Device */
+#define TD_CTRL_IOS         (1 << 25)	/* Isochronous Select */
+#define TD_CTRL_IOC         (1 << 24)	/* Interrupt on Complete */
+#define TD_CTRL_ACTIVE      (1 << 23)	/* TD Active */
+#define TD_CTRL_STALLED     (1 << 22)	/* TD Stalled */
+#define TD_CTRL_DBUFERR     (1 << 21)	/* Data Buffer Error */
+#define TD_CTRL_BABBLE      (1 << 20)	/* Babble Detected */
+#define TD_CTRL_NAK         (1 << 19)	/* NAK Received */
+#define TD_CTRL_CRCTIMEO    (1 << 18)	/* CRC/Time Out Error */
+#define TD_CTRL_BITSTUFF    (1 << 17)	/* Bit Stuff Error */
+#define TD_CTRL_ACTLEN_MASK 0x7ff	/* actual length, encoded as n - 1 */
+
+#define TD_CTRL_ANY_ERROR	(TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
+				 TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
+
+#define TD_TOKEN_TOGGLE		19
+
+/* ------------------------------------------------------------------------------------
+   Virtual Root HUB
+   ------------------------------------------------------------------------------------ */
+/* destination of request */
+#define RH_INTERFACE               0x01
+#define RH_ENDPOINT                0x02
+#define RH_OTHER                   0x03
+
+#define RH_CLASS                   0x20
+#define RH_VENDOR                  0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS           0x0080
+#define RH_CLEAR_FEATURE        0x0100
+#define RH_SET_FEATURE          0x0300
+#define RH_SET_ADDRESS          0x0500
+#define RH_GET_DESCRIPTOR       0x0680
+#define RH_SET_DESCRIPTOR       0x0700
+#define RH_GET_CONFIGURATION    0x0880
+#define RH_SET_CONFIGURATION    0x0900
+#define RH_GET_STATE            0x0280
+#define RH_GET_INTERFACE        0x0A80
+#define RH_SET_INTERFACE        0x0B00
+#define RH_SYNC_FRAME           0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP               0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION         0x00
+#define RH_PORT_ENABLE             0x01
+#define RH_PORT_SUSPEND            0x02
+#define RH_PORT_OVER_CURRENT       0x03
+#define RH_PORT_RESET              0x04
+#define RH_PORT_POWER              0x08
+#define RH_PORT_LOW_SPEED          0x09
+#define RH_C_PORT_CONNECTION       0x10
+#define RH_C_PORT_ENABLE           0x11
+#define RH_C_PORT_SUSPEND          0x12
+#define RH_C_PORT_OVER_CURRENT     0x13
+#define RH_C_PORT_RESET            0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER       0x00
+#define RH_C_HUB_OVER_CURRENT      0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP    0x00
+#define RH_ENDPOINT_STALL          0x01
+
+/* Our Vendor Specific feature */
+#define RH_REMOVE_EP               0x00
+
+
+#define RH_ACK                     0x01
+#define RH_REQ_ERR                 -1
+#define RH_NACK                    0x00
+
+
+/* Transfer descriptor structure */
+typedef struct {
+	unsigned long link;     /* next td/qh (LE)*/
+	unsigned long status;   /* status of the td */
+	unsigned long info;     /* Max Lenght / Endpoint / device address and PID */
+	unsigned long buffer;   /* pointer to data buffer (LE) */
+	unsigned long dev_ptr;  /* pointer to the assigned device (BE) */
+	unsigned long res[3];   /* reserved (TDs must be 8Byte aligned) */
+} uhci_td_t, *puhci_td_t;
+
+/* Queue Header structure */
+typedef struct {
+	unsigned long head;       /* Next QH (LE)*/
+	unsigned long element;		/* Queue element pointer (LE) */
+	unsigned long res[5];     /* reserved */
+	unsigned long dev_ptr;    /* if 0 no tds have been assigned to this qh */
+} uhci_qh_t, *puhci_qh_t;
+
+struct virt_root_hub {
+	int devnum;		            /* Address of Root Hub endpoint */
+	int numports;             /* number of ports */
+	int c_p_r[8];             /* C_PORT_RESET */
+};
+
+
+#endif /* _USB_UHCI_H_ */
+
+