powerpc, 5xx: remove support for 5xx

There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 90 deletions

diff --git a/board/mpl/pati/pci_eeprom.h b/board/mpl/pati/pci_eeprom.h
deleted file mode 100644
index 459c143..0000000
--- a/board/mpl/pati/pci_eeprom.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef __PCI_EEPROM_H_
-#define __PCI_EEPROM_H_	1
-
-#include "pati.h"
-/******************************************************************************
- * Eeprom Support
- ******************************************************************************/
-/**********************************************
-*               Definitions
-**********************************************/
-#define EE46_CMD_LEN    9       /* Bits in instructions */
-#define EE56_CMD_LEN    11      /* Bits in instructions */
-#define EE66_CMD_LEN    11      /* Bits in instructions */
-#define EE_READ         0x0180  /* 01 1000 0000 read instruction */
-#define EE_WRITE        0x0140  /* 01 0100 0000 write instruction */
-#define EE_WREN         0x0130  /* 01 0011 0000 write enable instruction */
-#define EE_WRALL        0x0110  /* 01 0001 0000 write all registers */
-#define EE_PRREAD       0x0180  /* 01 1000 0000 read address stored in Protect Register */
-#define EE_PRWRITE      0x0140  /* 01 0100 0000 write the address into PR */
-#define EE_WDS          0x0100  /* 01 0000 0000 write disable instruction */
-#define EE_PREN         0x0130  /* 01 0011 0000 protect enable instruction */
-#define EE_PRCLEAR      0x01FF  /* 01 1111 1111 clear protect register instr */
-#define EE_PRDS         0x0100  /* 01 0000 0000 ONE TIME ONLY, permenant */
-
-/***************************************************
- * EEPROM
- ***************************************************/
-#define LOW_WORD(x)	(((x) & 0xFFFF))
-#define HIGH_WORD(x)	(((x) >> 16) & 0xFFFF)
-
-typedef struct pci_eeprom_t {
-	unsigned short offset;
-	unsigned short value;
-} pci_eeprom;
-
-static pci_eeprom pati_eeprom[] = {
-	{ 0x00,PCI_DEVICE_ID_PATI },	/* PCI Device ID PCIIDR[31:16] */
-	{ 0x02,PCI_VENDOR_ID_MPL },	/* PCI Vendor ID PCIIDR[15:0] */
-	{ 0x04,PCI_CLASS_PROCESSOR_POWERPC },	/* PCI Class Code PCICCR[23:8] */
-	{ 0x06,0x00BA },	/* PCI Class Code / PCI Revision ID PCICCR[7:0] / PCIREV[7:0] */
-	{ 0x08,0x0007 },	/* PCI Maximum Latency / PCI Minimum Grant PCIMLR[7:0] / PCIMGR[7:0] */
-	{ 0x0A,0x0100 },	/* PCI Interrupt Pin / PCI Interrupt Line PCIIPR[7:0] / PCIILR[7:0] */
-	{ 0x0C,0x0000 },	/* MSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[31:16] */
-	{ 0x0E,0x0000 },	/* LSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[15:0] */
-	{ 0x10,0x0000 },	/* MSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[31:16] */
-	{ 0x12,0x0000 },	/* LSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[15:0] */
-	{ 0x14,HIGH_WORD(PATI_LOC_CFG_MASK) },	/* MSW of Direct Slave Local Address Space 0 Range LAS0RR[31:16] */
-	{ 0x16,LOW_WORD(PATI_LOC_CFG_MASK) },	/* LSW of Direct Slave Local Address Space 0 Range LAS0RR[15:0] */
-	{ 0x18,HIGH_WORD(PATI_LOC_CFG_ADDR) },	/* MSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[31:16] (CFG) */
-	{ 0x1A,LOW_WORD(PATI_LOC_CFG_ADDR)|1 },	/* LSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[15:2, 0], Reserved [1] */
-	{ 0x1C,0x0000 },	/* MSW of Mode/DMA Arbitration MARBR[31, 29:16] or DMAARB[31, 29:16], Reserved [30] */
-	{ 0x1E,0x0000 },	/* LSW of Mode/DMA Arbitration MARBR[15:0] or DMAARB[15:0] */
-	{ 0x20,0x0030 },	/* Local Miscellaneous Control 2 / Serial EEPROM WP Addr Boundary LMISC2[5:0], Res[7:6] / PROT_AREA[6:0], Res[7] */
-	{ 0x22,0x0510 },	/* Local Miscellaneous Control 1 / Local Bus Big/Little Endian Descriptor LMISC1[7:0] / BIGEND[7:0] */
-	{ 0x24,0x0000 },	/* MSW of Direct Slave Expansion ROM Range EROMRR[31:16] */
-	{ 0x26,0x0000 },	/* LSW of Direct Slave Expansion ROM Range EROMRR[15:11, 0], Reserved [10:1]  */
-	{ 0x28,0x0000 },	/* MSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[31:16] */
-	{ 0x2A,0x0000 },	/* LSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[15:11, 5:0], Reserved [10:6] */
-	{ 0x2C,(0x4243 | HIGH_WORD((PATI_LOC_CFG_SPACE0_ATTR))) },	/* MSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[31:16] */
-	{ 0x2E,LOW_WORD(PATI_LOC_CFG_SPACE0_ATTR) },	/* LSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[15:0] */
-	{ 0x30,HIGH_WORD(PATI_DMASTER_MASK) },	/* MSW of Local Range for Direct Master-to-PCI DMRR[31:16] */
-	{ 0x32,LOW_WORD(PATI_DMASTER_MASK) },	/* LSW of Local Range for Direct Master-to-PCI (Reserved) DMRR[15:0] */
-	{ 0x34,HIGH_WORD(PATI_DMASTER_ADDR) },	/* MSW of Local Base Address for Direct Master-to-PCI Memory DMLBAM[31:16] */
-	{ 0x36,LOW_WORD(PATI_DMASTER_ADDR) },	/* LSW of Local Base Address for Direct Master-to-PCI Memory (Reserved) DMLBAM[15:0] */
-	{ 0x38,0x0000 },	/* MSW of Local Bus Address for Direct Master-to-PCI I/O Configuration DMLBAI[31:16] */
-	{ 0x3A,0x0000 },	/* LSW of Local Bus Address for Direct Master-to-PCI I/O Configuration (Reserved) DMLBAI[15:0] */
-	{ 0x3C,0x0000 },	/* MSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[31:16] */
-	{ 0x3E,0x0000 },	/* LSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[15:0] */
-	{ 0x40,0x0000 },	/* MSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[31, 23:16] Reserved [30:24]*/
-	{ 0x42,0x0000 },	/* LSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[15:0] */
-	{ 0x44,0x0000 },	/* PCI Subsystem ID PCISID[15:0] */
-	{ 0x46,0x0000 },	/* PCI Subsystem Vendor ID PCISVID[15:0] */
-	{ 0x48,HIGH_WORD(PATI_LOC_SDRAM_MASK) },	/* MSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[31:16] */
-	{ 0x4A,LOW_WORD(PATI_LOC_SDRAM_MASK) },	/* LSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[15:0] */
-	{ 0x4C,HIGH_WORD(PATI_LOC_SDRAM_ADDR) },	/* MSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[31:16] (SDRAM) */
-	{ 0x4E,LOW_WORD(PATI_LOC_SDRAM_ADDR) | 0x1 },	/* LSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[15:2, 0], Reserved [1] */
-	{ 0x50,HIGH_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) },	/* MSW of Local Address Space 1 Bus Region Descriptor LBRD1[31:16] */
-	{ 0x52,LOW_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) },	/* LSW of Local Address Space 1 Bus Region Descriptor (Reserved) LBRD1[15:0] */
-	{ 0x54,0x0000 },	/* Hot Swap Control/Status (Reserved) Reserved */
-	{ 0x56,0x0000 },	/* Hot Swap Next Capability Pointer / Hot Swap Control HS_NEXT[7:0] / HS_CNTL[7:0] */
-	{ 0x58,0x0000 },	/* Reserved Reserved */
-	{ 0x5A,0x0000 },	/* PCI Arbiter Control PCIARB[3:0], Reserved [15:4] */
-	{ 0x5C,0x0000 },	/* Power Management Capabilities PMC[15:9, 2:0] */
-	{ 0x5E,0x0000 },	/* Power Management Next Capability Pointer (Reserved) / Power Management Capability ID (Reserved) Reserved*/
-	{ 0x60,0x0000 },	/* Power Management Data / PMCSR Bridge Support Extension (Reserved) PMDATA[7:0] / Reserved */
-	{ 0x62,0x0000 },	/* Power Management Control/Status PMCSR[14:8] */
-	{ 0xFFFF,0xFFFF}	/* terminaror */
-};
-#define PATI_EEPROM_LAST_OFFSET	0x64
-#endif /* #ifndef __PCI_EEPROM_H_ */