diff options
| author | Vitaly Andrianov <vitalya@ti.com> | 2014-10-22 14:47:58 (GMT) |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2014-10-23 15:27:29 (GMT) |
| commit | 89f44bb0ceda8ba6b96f16d84a0a8a014f251e6e (patch) | |
| tree | 73ddf2d3c066e9a52aad7b5312c651e266092bc9 /board/ti | |
| parent | 079da2d514a447626a81f9df45c9f57e2f512a77 (diff) | |
| download | u-boot-89f44bb0ceda8ba6b96f16d84a0a8a014f251e6e.tar.xz | |
keystone2: ecc: add ddr3 error detection and correction support
This patch adds the DDR3 ECC support to enable ECC in the DDR3
EMIF controller for Keystone II devices.
By default, ECC will only be enabled if RMW is supported in the
DDR EMIF controller. The entire DDR memory will be scrubbed to
zero using an EDMA channel after ECC is enabled and before
u-boot is re-located to DDR memory.
An ecc_test environment variable is added for ECC testing.
If ecc_test is set to 0, a detection of 2-bit error will reset
the device, if ecc_test is set to 1, 2-bit error detection
will not reset the device, user can still boot the kernel to
check the ECC error handling in kernel.
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Diffstat (limited to 'board/ti')
| -rw-r--r-- | board/ti/ks2_evm/board.c | 3 | ||||
| -rw-r--r-- | board/ti/ks2_evm/ddr3_k2hk.c | 16 |
2 files changed, 19 insertions, 0 deletions
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 8991786..4029493 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -40,6 +40,7 @@ int dram_init(void) gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_MAX_RAM_BANK_SIZE); aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs); + ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE); return 0; } @@ -254,5 +255,7 @@ void ft_board_setup_ex(void *blob, bd_t *bd) reserve_start += 2; } } + + ddr3_check_ecc_int(KS2_DDR3A_EMIF_CTRL_BASE); } #endif diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c index 6070a99..a1c3d05 100644 --- a/board/ti/ks2_evm/ddr3_k2hk.c +++ b/board/ti/ks2_evm/ddr3_k2hk.c @@ -12,6 +12,8 @@ #include <asm/arch/ddr3.h> #include <asm/arch/hardware.h> +static int ddr3_size; + struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); @@ -44,12 +46,14 @@ void ddr3_init(void) ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_8g); printf("DRAM: Capacity 8 GiB (includes reported below)\n"); + ddr3_size = 8; } else { ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g); ddr3_1600_8g.sdcfg |= 0x1000; ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_8g); printf("DRAM: Capacity 4 GiB (includes reported below)\n"); + ddr3_size = 4; } } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { init_pll(&ddr3a_333); @@ -70,11 +74,15 @@ void ddr3_init(void) } ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_2g); + ddr3_size = 2; + printf("DRAM: 2 GiB"); } else { ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g); ddr3_1333_2g.sdcfg |= 0x1000; ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_2g); + ddr3_size = 1; + printf("DRAM: 1 GiB"); } } else { printf("Unknown SO-DIMM. Cannot configure DDR3\n"); @@ -86,3 +94,11 @@ void ddr3_init(void) if (cpu_revision() <= 1) ddr3_err_reset_workaround(); } + +/** + * ddr3_get_size - return ddr3 size in GiB + */ +int ddr3_get_size(void) +{ + return ddr3_size; +} |