diff options
author | Nishanth Menon <nm@ti.com> | 2016-02-24 18:30:55 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2016-03-14 23:18:33 (GMT) |
commit | 770e68c0a37fded897d4bdda661614fc81cb33d2 (patch) | |
tree | fef53e28a81a981ba9843240fed768cae6008236 /board/ti | |
parent | 0bea813d0018303610ec487314003c21f0116a21 (diff) | |
download | u-boot-770e68c0a37fded897d4bdda661614fc81cb33d2.tar.xz |
ti: AM335x: Use generic EEPROM detection logic
Use the generic EEPROM detection logic instead of duplicating the AM
eeprom logic.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/ti')
-rw-r--r-- | board/ti/am335x/Kconfig | 2 | ||||
-rw-r--r-- | board/ti/am335x/board.c | 115 | ||||
-rw-r--r-- | board/ti/am335x/board.h | 49 | ||||
-rw-r--r-- | board/ti/am335x/mux.c | 13 |
4 files changed, 59 insertions, 120 deletions
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index 49b73ab..11ef3ca 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -38,4 +38,6 @@ config NOR_BOOT as the ROM only partially sets up pinmux. We also default to using NOR for environment. +source "board/ti/common/Kconfig" + endif diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index f56d17e..4330be6 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -31,6 +31,7 @@ #include <environment.h> #include <watchdog.h> #include <environment.h> +#include "../common/board_detect.h" #include "board.h" DECLARE_GLOBAL_DATA_PTR; @@ -46,43 +47,9 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; /* * Read header information from EEPROM into global structure. */ -static int read_eeprom(struct am335x_baseboard_id *header) +static inline int __maybe_unused read_eeprom(void) { - /* Check if baseboard eeprom is available */ - if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { - puts("Could not probe the EEPROM; something fundamentally " - "wrong on the I2C bus.\n"); - return -ENODEV; - } - - /* read the eeprom using i2c */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header, - sizeof(struct am335x_baseboard_id))) { - puts("Could not read the EEPROM; something fundamentally" - " wrong on the I2C bus.\n"); - return -EIO; - } - - if (header->magic != 0xEE3355AA) { - /* - * read the eeprom using i2c again, - * but use only a 1 byte address - */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header, - sizeof(struct am335x_baseboard_id))) { - puts("Could not read the EEPROM; something " - "fundamentally wrong on the I2C bus.\n"); - return -EIO; - } - - if (header->magic != 0xEE3355AA) { - printf("Incorrect magic number (0x%x) in EEPROM\n", - header->magic); - return -EINVAL; - } - } - - return 0; + return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR); } #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -223,16 +190,15 @@ const struct dpll_params dpll_ddr_bone_black = { void am33xx_spl_board_init(void) { - struct am335x_baseboard_id header; int mpu_vdd; - if (read_eeprom(&header) < 0) + if (read_eeprom() < 0) puts("Could not get board ID.\n"); /* Get the frequency */ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); - if (board_is_bone(&header) || board_is_bone_lt(&header)) { + if (board_is_bone() || board_is_bone_lt()) { /* BeagleBone PMIC Code */ int usb_cur_lim; @@ -240,8 +206,7 @@ void am33xx_spl_board_init(void) * Only perform PMIC configurations if board rev > A1 * on Beaglebone White */ - if (board_is_bone(&header) && !strncmp(header.version, - "00A1", 4)) + if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4)) return; if (i2c_probe(TPS65217_CHIP_PM)) @@ -251,7 +216,7 @@ void am33xx_spl_board_init(void) * On Beaglebone White we need to ensure we have AC power * before increasing the frequency. */ - if (board_is_bone(&header)) { + if (board_is_bone()) { uchar pmic_status_reg; if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg)) @@ -266,7 +231,7 @@ void am33xx_spl_board_init(void) * Override what we have detected since we know if we have * a Beaglebone Black it supports 1GHz. */ - if (board_is_bone_lt(&header)) + if (board_is_bone_lt()) dpll_mpu_opp100.m = MPUPLL_M_1000; /* @@ -307,7 +272,7 @@ void am33xx_spl_board_init(void) * Set LDO3, LDO4 output voltage to 3.3V for Beaglebone. * Set LDO3 to 1.8V and LDO4 to 3.3V for Beaglebone Black. */ - if (board_is_bone(&header)) { + if (board_is_bone()) { if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, TPS65217_DEFLS1, TPS65217_LDO_VOLTAGE_OUT_3_3, @@ -367,18 +332,16 @@ void am33xx_spl_board_init(void) const struct dpll_params *get_dpll_ddr_params(void) { - struct am335x_baseboard_id header; - enable_i2c0_pin_mux(); i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - if (read_eeprom(&header) < 0) + if (read_eeprom() < 0) puts("Could not get board ID.\n"); - if (board_is_evm_sk(&header)) + if (board_is_evm_sk()) return &dpll_ddr_evm_sk; - else if (board_is_bone_lt(&header)) + else if (board_is_bone_lt()) return &dpll_ddr_bone_black; - else if (board_is_evm_15_or_later(&header)) + else if (board_is_evm_15_or_later()) return &dpll_ddr_evm_sk; else return &dpll_ddr; @@ -403,12 +366,10 @@ void set_uart_mux_conf(void) void set_mux_conf_regs(void) { - __maybe_unused struct am335x_baseboard_id header; - - if (read_eeprom(&header) < 0) + if (read_eeprom() < 0) puts("Could not get board ID.\n"); - enable_board_pin_mux(&header); + enable_board_pin_mux(); } const struct ctrl_ioregs ioregs_evmsk = { @@ -445,12 +406,10 @@ const struct ctrl_ioregs ioregs = { void sdram_init(void) { - __maybe_unused struct am335x_baseboard_id header; - - if (read_eeprom(&header) < 0) + if (read_eeprom() < 0) puts("Could not get board ID.\n"); - if (board_is_evm_sk(&header)) { + if (board_is_evm_sk()) { /* * EVM SK 1.2A and later use gpio0_7 to enable DDR3. * This is safe enough to do on older revs. @@ -459,15 +418,15 @@ void sdram_init(void) gpio_direction_output(GPIO_DDR_VTT_EN, 1); } - if (board_is_evm_sk(&header)) + if (board_is_evm_sk()) config_ddr(303, &ioregs_evmsk, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); - else if (board_is_bone_lt(&header)) + else if (board_is_bone_lt()) config_ddr(400, &ioregs_bonelt, &ddr3_beagleblack_data, &ddr3_beagleblack_cmd_ctrl_data, &ddr3_beagleblack_emif_reg_data, 0); - else if (board_is_evm_15_or_later(&header)) + else if (board_is_evm_15_or_later()) config_ddr(303, &ioregs_evm15, &ddr3_evm_data, &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0); else @@ -496,26 +455,16 @@ int board_init(void) int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - char safe_string[HDR_NAME_LEN + 1]; - struct am335x_baseboard_id header; + int rc; + char *name = NULL; - if (read_eeprom(&header) < 0) + rc = read_eeprom(); + if (rc) puts("Could not get board ID.\n"); - /* Now set variables based on the header. */ - strncpy(safe_string, (char *)header.name, sizeof(header.name)); - safe_string[sizeof(header.name)] = 0; - setenv("board_name", safe_string); - - /* BeagleBone Green eeprom, board_rev: 0x1a 0x00 0x00 0x00 */ - if ( (header.version[0] == 0x1a) && (header.version[1] == 0x00) && - (header.version[2] == 0x00) && (header.version[3] == 0x00) ) { - setenv("board_rev", "BBG1"); - } else { - strncpy(safe_string, (char *)header.version, sizeof(header.version)); - safe_string[sizeof(header.version)] = 0; - setenv("board_rev", safe_string); - } + if (board_is_bbg1()) + name = "BBG1"; + set_board_info_env(name); #endif return 0; @@ -587,7 +536,7 @@ int board_eth_init(bd_t *bis) int rv, n = 0; uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - __maybe_unused struct am335x_baseboard_id header; + __maybe_unused struct ti_am_eeprom *header; /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); @@ -624,11 +573,11 @@ int board_eth_init(bd_t *bis) eth_setenv_enetaddr("eth1addr", mac_addr); } - if (read_eeprom(&header) < 0) + if (read_eeprom() < 0) puts("Could not get board ID.\n"); - if (board_is_bone(&header) || board_is_bone_lt(&header) || - board_is_idk(&header)) { + if (board_is_bone() || board_is_bone_lt() || + board_is_idk()) { writel(MII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; @@ -657,7 +606,7 @@ int board_eth_init(bd_t *bis) #define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 #define AR8051_RGMII_TX_CLK_DLY 0x100 - if (board_is_evm_sk(&header) || board_is_gp_evm(&header)) { + if (board_is_evm_sk() || board_is_gp_evm()) { const char *devname; devname = miiphy_get_current_dev(); diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h index bc700d5..062c345 100644 --- a/board/ti/am335x/board.h +++ b/board/ti/am335x/board.h @@ -11,53 +11,40 @@ #ifndef _BOARD_H_ #define _BOARD_H_ -/* - * TI AM335x parts define a system EEPROM that defines certain sub-fields. - * We use these fields to in turn see what board we are on, and what - * that might require us to set or not set. - */ -#define HDR_NO_OF_MAC_ADDR 3 -#define HDR_ETH_ALEN 6 -#define HDR_NAME_LEN 8 - -struct am335x_baseboard_id { - unsigned int magic; - char name[HDR_NAME_LEN]; - char version[4]; - char serial[12]; - char config[32]; - char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; -}; +static inline int board_is_bone(void) +{ + return board_ti_is("A335BONE"); +} -static inline int board_is_bone(struct am335x_baseboard_id *header) +static inline int board_is_bone_lt(void) { - return !strncmp(header->name, "A335BONE", HDR_NAME_LEN); + return board_ti_is("A335BNLT"); } -static inline int board_is_bone_lt(struct am335x_baseboard_id *header) +static inline int board_is_bbg1(void) { - return !strncmp(header->name, "A335BNLT", HDR_NAME_LEN); + return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BBG1", 4); } -static inline int board_is_evm_sk(struct am335x_baseboard_id *header) +static inline int board_is_evm_sk(void) { - return !strncmp("A335X_SK", header->name, HDR_NAME_LEN); + return board_ti_is("A335X_SK"); } -static inline int board_is_idk(struct am335x_baseboard_id *header) +static inline int board_is_idk(void) { - return !strncmp(header->config, "SKU#02", 6); + return !strncmp(board_ti_get_config(), "SKU#02", 6); } -static inline int board_is_gp_evm(struct am335x_baseboard_id *header) +static inline int board_is_gp_evm(void) { - return !strncmp("A33515BB", header->name, HDR_NAME_LEN); + return board_ti_is("A33515BB"); } -static inline int board_is_evm_15_or_later(struct am335x_baseboard_id *header) +static inline int board_is_evm_15_or_later(void) { - return (board_is_gp_evm(header) && - strncmp("1.5", header->version, 3) <= 0); + return (board_is_gp_evm() && + strncmp("1.5", board_ti_get_rev(), 3) <= 0); } /* @@ -73,5 +60,5 @@ void enable_uart3_pin_mux(void); void enable_uart4_pin_mux(void); void enable_uart5_pin_mux(void); void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(struct am335x_baseboard_id *header); +void enable_board_pin_mux(void); #endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 79ed02f..fdf827f 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -19,6 +19,7 @@ #include <asm/arch/mux.h> #include <asm/io.h> #include <i2c.h> +#include "../common/board_detect.h" #include "board.h" static struct module_pin_mux uart0_pin_mux[] = { @@ -312,10 +313,10 @@ static unsigned short detect_daughter_board_profile(void) return (1 << (val & PROFILE_MASK)); } -void enable_board_pin_mux(struct am335x_baseboard_id *header) +void enable_board_pin_mux(void) { /* Do board-specific muxes. */ - if (board_is_bone(header)) { + if (board_is_bone()) { /* Beaglebone pinmux */ configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); @@ -326,7 +327,7 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) #else configure_module_pin_mux(mmc1_pin_mux); #endif - } else if (board_is_gp_evm(header)) { + } else if (board_is_gp_evm()) { /* General Purpose EVM */ unsigned short profile = detect_daughter_board_profile(); configure_module_pin_mux(rgmii1_pin_mux); @@ -343,17 +344,17 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); } - } else if (board_is_idk(header)) { + } else if (board_is_idk()) { /* Industrial Motor Control (IDK) */ configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_no_cd_pin_mux); - } else if (board_is_evm_sk(header)) { + } else if (board_is_evm_sk()) { /* Starter Kit EVM */ configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux_sk_evm); - } else if (board_is_bone_lt(header)) { + } else if (board_is_bone_lt()) { /* Beaglebone LT pinmux */ configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); |