diff options
author | Vitaly Andrianov <vitalya@ti.com> | 2016-03-04 16:36:42 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2016-03-14 23:18:44 (GMT) |
commit | d9a76e77c8c99dc6da98aef94e0a241581d1cbe7 (patch) | |
tree | d823639ecb785a4a1001e72e22b77f4615bc129d /board/ti | |
parent | ef76ebb1ef7b9b4c72c71b003c6617187e4cd7d9 (diff) | |
download | u-boot-d9a76e77c8c99dc6da98aef94e0a241581d1cbe7.tar.xz |
ARM: keystone2: use SPD info to configure K2HK and K2E DDR3
This commit replaces hard-coded EMIF and PHY DDR3 configurations for
predefined SODIMMs to a calculated configuration. The SODIMM parameters
are read from SODIMM's SPD and used to calculated the configuration.
The current commit supports calculation for DDR3 with 1600MHz and 1333MHz
only.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/ti')
-rw-r--r-- | board/ti/ks2_evm/Makefile | 4 | ||||
-rw-r--r-- | board/ti/ks2_evm/ddr3_cfg.c | 159 | ||||
-rw-r--r-- | board/ti/ks2_evm/ddr3_cfg.h | 11 | ||||
-rw-r--r-- | board/ti/ks2_evm/ddr3_k2e.c | 51 | ||||
-rw-r--r-- | board/ti/ks2_evm/ddr3_k2hk.c | 97 |
5 files changed, 62 insertions, 260 deletions
diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile index d60496e..7ef2d2b 100644 --- a/board/ti/ks2_evm/Makefile +++ b/board/ti/ks2_evm/Makefile @@ -1,17 +1,17 @@ # # KS2-EVM: board Makefile -# (C) Copyright 2012-2014 +# (C) Copyright 2012-2015 # Texas Instruments Incorporated, <www.ti.com> # SPDX-License-Identifier: GPL-2.0+ # obj-y += board.o -obj-y += ddr3_cfg.o obj-$(CONFIG_K2HK_EVM) += board_k2hk.o obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o obj-$(CONFIG_K2E_EVM) += board_k2e.o obj-$(CONFIG_K2E_EVM) += ddr3_k2e.o obj-$(CONFIG_K2L_EVM) += board_k2l.o obj-$(CONFIG_K2L_EVM) += ddr3_k2l.o +obj-$(CONFIG_K2L_EVM) += ddr3_cfg.o obj-$(CONFIG_K2G_EVM) += board_k2g.o obj-$(CONFIG_K2G_EVM) += ddr3_k2g.o diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c index ab44676..b6b59a4 100644 --- a/board/ti/ks2_evm/ddr3_cfg.c +++ b/board/ti/ks2_evm/ddr3_cfg.c @@ -9,129 +9,8 @@ #include <common.h> -#include <i2c.h> #include <asm/arch/ddr3.h> -#include <asm/arch/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* DDR3 PHY configuration data with 1600M rate, 8GB size */ -struct ddr3_phy_config ddr3phy_1600_8g = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), - .dcr_val = ((1 << 10)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x32868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -/* DDR3 EMIF configuration data with 1600M rate, 8GB size */ -struct ddr3_emif_config ddr3_1600_8g = { - .sdcfg = 0x6200CE6Aul, - .sdtim1 = 0x16709C55ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x435DFF54ul, - .sdtim4 = 0x553F0CFFul, - .zqcfg = 0xF0073200ul, - .sdrfc = 0x00001869ul, -}; - -#ifdef CONFIG_K2HK_EVM -/* DDR3 PHY configuration data with 1333M rate, and 2GB size */ -struct ddr3_phy_config ddr3phy_1333_2g = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), - .dcr_val = ((1 << 10)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x32857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -/* DDR3 EMIF configuration data with 1333M rate, and 2GB size */ -struct ddr3_emif_config ddr3_1333_2g = { - .sdcfg = 0x62008C62ul, - .sdtim1 = 0x125C8044ul, - .sdtim2 = 0x00001D29ul, - .sdtim3 = 0x32CDFF43ul, - .sdtim4 = 0x543F0ADFul, - .zqcfg = 0x70073200ul, - .sdrfc = 0x00001457ul, -}; -#endif - -#ifdef CONFIG_K2E_EVM -/* DDR3 PHY configuration data with 1600M rate, and 4GB size */ -struct ddr3_phy_config ddr3phy_1600_4g = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x08861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), - .dcr_val = ((1 << 10)), - .dtpr0 = 0x9D9CBB66ul, - .dtpr1 = 0x12840300ul, - .dtpr2 = 0x5002D200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0001005Dul, - .zq1cr1 = 0x0001005Bul, - .zq2cr1 = 0x0001005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -/* DDR3 EMIF configuration data with 1600M rate, and 4GB size */ -struct ddr3_emif_config ddr3_1600_4g = { - .sdcfg = 0x6200CE62ul, - .sdtim1 = 0x166C9855ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x421DFF53ul, - .sdtim4 = 0x543F07FFul, - .zqcfg = 0x70073200ul, - .sdrfc = 0x00001869ul, -}; -#endif +#include "ddr3_cfg.h" struct ddr3_phy_config ddr3phy_1600_2g = { .pllcr = 0x0001C000ul, @@ -168,39 +47,3 @@ struct ddr3_emif_config ddr3_1600_2g = { .zqcfg = 0x70073200ul, .sdrfc = 0x00001869ul, }; - -int ddr3_get_dimm_params(char *dimm_name) -{ - int ret; - int old_bus; - u8 spd_params[256]; - - i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); - - old_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - ret = i2c_read(0x53, 0, 1, spd_params, 256); - - i2c_set_bus_num(old_bus); - - dimm_name[0] = '\0'; - - if (ret) { - puts("Cannot read DIMM params\n"); - return 1; - } - - /* - * We need to convert spd data to dimm parameters - * and to DDR3 EMIF and PHY regirsters values. - * For now we just return DIMM type string value. - * Caller may use this value to choose appropriate - * a pre-set DDR3 configuration - */ - - strncpy(dimm_name, (char *)&spd_params[0x80], 18); - dimm_name[18] = '\0'; - - return 0; -} diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h index 5bd786c..f95edde 100644 --- a/board/ti/ks2_evm/ddr3_cfg.h +++ b/board/ti/ks2_evm/ddr3_cfg.h @@ -10,18 +10,11 @@ #ifndef __DDR3_CFG_H #define __DDR3_CFG_H -extern struct ddr3_phy_config ddr3phy_1600_8g; -extern struct ddr3_emif_config ddr3_1600_8g; - -extern struct ddr3_phy_config ddr3phy_1333_2g; -extern struct ddr3_emif_config ddr3_1333_2g; - -extern struct ddr3_phy_config ddr3phy_1600_4g; -extern struct ddr3_emif_config ddr3_1600_4g; +#include <asm/arch/ddr3.h> extern struct ddr3_phy_config ddr3phy_1600_2g; extern struct ddr3_emif_config ddr3_1600_2g; -int ddr3_get_dimm_params(char *dimm_name); +int ddr3_get_dimm_params_from_spd(struct ddr3_spd_cb *spd_cb); #endif /* __DDR3_CFG_H */ diff --git a/board/ti/ks2_evm/ddr3_k2e.c b/board/ti/ks2_evm/ddr3_k2e.c index 35ffb42..e82aa66 100644 --- a/board/ti/ks2_evm/ddr3_k2e.c +++ b/board/ti/ks2_evm/ddr3_k2e.c @@ -1,7 +1,7 @@ /* * Keystone2: DDR3 initialization * - * (C) Copyright 2014 + * (C) Copyright 2014-2015 * Texas Instruments Incorporated, <www.ti.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -12,42 +12,37 @@ #include <asm/arch/ddr3.h> static struct pll_init_data ddr3_400 = DDR3_PLL_400; +static struct pll_init_data ddr3_333 = DDR3_PLL_333; u32 ddr3_init(void) { - u32 ddr3_size; - char dimm_name[32]; + struct ddr3_spd_cb spd_cb; - if (~(readl(KS2_PLL_CNTRL_BASE + KS2_RSTCTRL_RSTYPE) & 0x1)) - init_pll(&ddr3_400); + if (ddr3_get_dimm_params_from_spd(&spd_cb)) { + printf("Sorry, I don't know how to configure DDR3A.\n" + "Bye :(\n"); + for (;;) + ; + } - ddr3_get_dimm_params(dimm_name); + printf("Detected SO-DIMM [%s]\n", spd_cb.dimm_name); - printf("Detected SO-DIMM [%s]\n", dimm_name); + printf("DDR3 speed %d\n", spd_cb.ddrspdclock); + if (spd_cb.ddrspdclock == 1600) + init_pll(&ddr3_400); + else + init_pll(&ddr3_333); /* Reset DDR3 PHY after PLL enabled */ ddr3_reset_ddrphy(); - if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { - /* 8G SO-DIMM */ - ddr3_size = 8; - printf("DRAM: 8 GiB\n"); - ddr3phy_1600_8g.zq0cr1 |= 0x10000; - ddr3phy_1600_8g.zq1cr1 |= 0x10000; - ddr3phy_1600_8g.zq2cr1 |= 0x10000; - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g); - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_8g); - } else if (!strcmp(dimm_name, "18KSF51272HZ-1G6K2")) { - /* 4G SO-DIMM */ - ddr3_size = 4; - printf("DRAM: 4 GiB\n"); - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_4g); - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_4g); - } else { - printf("Unknown SO-DIMM. Cannot configure DDR3\n"); - while (1) - ; - } + spd_cb.phy_cfg.zq0cr1 |= 0x10000; + spd_cb.phy_cfg.zq1cr1 |= 0x10000; + spd_cb.phy_cfg.zq2cr1 |= 0x10000; + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &spd_cb.phy_cfg); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &spd_cb.emif_cfg); + + printf("DRAM: %d GiB\n", spd_cb.ddr_size_gbyte); - return ddr3_size; + return (u32)spd_cb.ddr_size_gbyte; } diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c index b36eb27..f848422 100644 --- a/board/ti/ks2_evm/ddr3_k2hk.c +++ b/board/ti/ks2_evm/ddr3_k2hk.c @@ -17,77 +17,48 @@ struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); u32 ddr3_init(void) { - char dimm_name[32]; u32 ddr3_size; + struct ddr3_spd_cb spd_cb; - ddr3_get_dimm_params(dimm_name); + if (ddr3_get_dimm_params_from_spd(&spd_cb)) { + printf("Sorry, I don't know how to configure DDR3A.\n" + "Bye :(\n"); + for (;;) + ; + } - printf("Detected SO-DIMM [%s]\n", dimm_name); + printf("Detected SO-DIMM [%s]\n", spd_cb.dimm_name); - if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { - init_pll(&ddr3a_400); - if (cpu_revision() > 0) { - if (cpu_revision() > 1) { - /* PG 2.0 */ - /* Reset DDR3A PHY after PLL enabled */ - ddr3_reset_ddrphy(); - ddr3phy_1600_8g.zq0cr1 |= 0x10000; - ddr3phy_1600_8g.zq1cr1 |= 0x10000; - ddr3phy_1600_8g.zq2cr1 |= 0x10000; - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1600_8g); - } else { - /* PG 1.1 */ - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1600_8g); - } + if ((cpu_revision() > 1) || + (__raw_readl(KS2_RSTCTRL_RSTYPE) & 0x1)) { + printf("DDR3 speed %d\n", spd_cb.ddrspdclock); + if (spd_cb.ddrspdclock == 1600) + init_pll(&ddr3a_400); + else + init_pll(&ddr3a_333); + } - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1600_8g); - printf("DRAM: Capacity 8 GiB (includes reported below)\n"); - ddr3_size = 8; - } else { - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g); - ddr3_1600_8g.sdcfg |= 0x1000; - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1600_8g); - printf("DRAM: Capacity 4 GiB (includes reported below)\n"); - ddr3_size = 4; - } - } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { - init_pll(&ddr3a_333); - if (cpu_revision() > 0) { - if (cpu_revision() > 1) { - /* PG 2.0 */ - /* Reset DDR3A PHY after PLL enabled */ - ddr3_reset_ddrphy(); - ddr3phy_1333_2g.zq0cr1 |= 0x10000; - ddr3phy_1333_2g.zq1cr1 |= 0x10000; - ddr3phy_1333_2g.zq2cr1 |= 0x10000; - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1333_2g); - } else { - /* PG 1.1 */ - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1333_2g); - } - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1333_2g); - ddr3_size = 2; - printf("DRAM: 2 GiB"); - } else { - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g); - ddr3_1333_2g.sdcfg |= 0x1000; - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1333_2g); - ddr3_size = 1; - printf("DRAM: 1 GiB"); + if (cpu_revision() > 0) { + if (cpu_revision() > 1) { + /* PG 2.0 */ + /* Reset DDR3A PHY after PLL enabled */ + ddr3_reset_ddrphy(); + spd_cb.phy_cfg.zq0cr1 |= 0x10000; + spd_cb.phy_cfg.zq1cr1 |= 0x10000; + spd_cb.phy_cfg.zq2cr1 |= 0x10000; } + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &spd_cb.phy_cfg); + + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &spd_cb.emif_cfg); + + ddr3_size = spd_cb.ddr_size_gbyte; } else { - printf("Unknown SO-DIMM. Cannot configure DDR3\n"); - while (1) - ; + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &spd_cb.phy_cfg); + spd_cb.emif_cfg.sdcfg |= 0x1000; + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &spd_cb.emif_cfg); + ddr3_size = spd_cb.ddr_size_gbyte / 2; } + printf("DRAM: %d GiB (includes reported below)\n", ddr3_size); /* Apply the workaround for PG 1.0 and 1.1 Silicons */ if (cpu_revision() <= 1) |