diff options
author | wdenk <wdenk> | 2002-08-26 22:36:39 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2002-08-26 22:36:39 (GMT) |
commit | f8cac651b33efa270e4dfa1292d01a3b5d7a62cf (patch) | |
tree | 78f852cbd430308689fb44f6d2ab243cf5cdd73b /board/tqm8xx/tqm8xx.c | |
parent | 67c4f48a49bb428bca409b1f6b6ca03f448c3645 (diff) | |
download | u-boot-f8cac651b33efa270e4dfa1292d01a3b5d7a62cf.tar.xz |
Initial revision
Diffstat (limited to 'board/tqm8xx/tqm8xx.c')
-rw-r--r-- | board/tqm8xx/tqm8xx.c | 423 |
1 files changed, 423 insertions, 0 deletions
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c new file mode 100644 index 0000000..0500482 --- /dev/null +++ b/board/tqm8xx/tqm8xx.c @@ -0,0 +1,423 @@ +/* + * (C) Copyright 2000, 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc8xx.h> + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (long int, long int *, long int); + +/* ------------------------------------------------------------------------- */ + +#define _NOT_USED_ 0xFFFFFFFF + +const uint sdram_table[] = +{ + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00, + 0x1FF5FC47, /* last */ + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */ + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00, + 0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x1F0DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00, + 0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + * + * Test TQ ID string (TQM8xx...) + * If present, check for "L" type (no second DRAM bank), + * otherwise "L" type is assumed as default. + * + * Set board_type to 'L' for "L" type, 0 else. + */ + +int checkboard (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned char *s = getenv ("serial#"); + + puts ("Board: "); + + if (!s || strncmp (s, "TQM8", 4)) { + puts ("### No HW ID - assuming TQM8xxL\n"); + return (0); + } + + if ((*(s + 6) == 'L')) { /* a TQM8xxL type */ + gd->board_type = 'L'; + } + + for (; *s; ++s) { + if (*s == ' ') + break; + putc (*s); + } + putc ('\n'); + + return (0); +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size8, size9; + long int size_b0 = 0; + long int size_b1 = 0; + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + + /* + * The following value is used as an address (i.e. opcode) for + * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If + * the port size is 32bit the SDRAM does NOT "see" the lower two + * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for + * MICRON SDRAMs: + * -> 0 00 010 0 010 + * | | | | +- Burst Length = 4 + * | | | +----- Burst Type = Sequential + * | | +------- CAS Latency = 2 + * | +----------- Operating Mode = Standard + * +-------------- Write Burst Mode = Programmed Burst Length + */ + memctl->memc_mar = 0x00000088; + + /* + * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; + +#ifndef CONFIG_CAN_DRIVER + if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */ + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; + } +#endif /* CONFIG_CAN_DRIVER */ + + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + + udelay (200); + + /* perform SDRAM initializsation sequence */ + + memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ + udelay (1); + memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ + udelay (1); + +#ifndef CONFIG_CAN_DRIVER + if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */ + memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */ + udelay (1); + memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */ + udelay (1); + } +#endif /* CONFIG_CAN_DRIVER */ + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay (1000); + + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); + + udelay (1000); + + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); + + if (size8 < size9) { /* leave configuration at 9 columns */ + size_b0 = size9; +/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ + } else { /* back to 8 columns */ + size_b0 = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay (500); +/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ + } + +#ifndef CONFIG_CAN_DRIVER + if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */ + /* + * Check Bank 1 Memory Size + * use current column settings + * [9 column SDRAM may also be used in 8 column mode, + * but then only half the real size will be used.] + */ + size_b1 = + dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); +/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ + } else { + size_b1 = 0; + } +#endif /* CONFIG_CAN_DRIVER */ + + udelay (1000); + + /* + * Adjust refresh rate depending on SDRAM type, both banks + * For types > 128 MBit leave it at the current (fast) rate + */ + if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay (1000); + } + + /* + * Final mapping: map bigger bank first + */ + if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ + + memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br3 = + (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b0 > 0) { + /* + * Position Bank 0 immediately above Bank 1 + */ + memctl->memc_or2 = + ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + + size_b1; + } else { + unsigned long reg; + + /* + * No bank 0 + * + * invalidate bank + */ + memctl->memc_br2 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } + + } else { /* SDRAM Bank 0 is bigger - map first */ + + memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b1 > 0) { + /* + * Position Bank 1 immediately above Bank 0 + */ + memctl->memc_or3 = + ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br3 = + ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + + size_b0; + } else { + unsigned long reg; + +#ifndef CONFIG_CAN_DRIVER + /* + * No bank 1 + * + * invalidate bank + */ + memctl->memc_br3 = 0; +#endif /* CONFIG_CAN_DRIVER */ + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } + } + + udelay (10000); + +#ifdef CONFIG_CAN_DRIVER + /* Initialize OR3 / BR3 */ + memctl->memc_or3 = CFG_OR3_CAN; + memctl->memc_br3 = CFG_BR3_CAN; + + /* Initialize MBMR */ + memctl->memc_mbmr = MAMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */ + + /* Initialize UPMB for CAN: single read */ + memctl->memc_mdr = 0xFFFFC004; + memctl->memc_mcr = 0x0100 | UPMB; + + memctl->memc_mdr = 0x0FFFD004; + memctl->memc_mcr = 0x0101 | UPMB; + + memctl->memc_mdr = 0x0FFFC000; + memctl->memc_mcr = 0x0102 | UPMB; + + memctl->memc_mdr = 0x3FFFC004; + memctl->memc_mcr = 0x0103 | UPMB; + + memctl->memc_mdr = 0xFFFFDC05; + memctl->memc_mcr = 0x0104 | UPMB; + + /* Initialize UPMB for CAN: single write */ + memctl->memc_mdr = 0xFFFCC004; + memctl->memc_mcr = 0x0118 | UPMB; + + memctl->memc_mdr = 0xCFFCD004; + memctl->memc_mcr = 0x0119 | UPMB; + + memctl->memc_mdr = 0x0FFCC000; + memctl->memc_mcr = 0x011A | UPMB; + + memctl->memc_mdr = 0x7FFCC004; + memctl->memc_mcr = 0x011B | UPMB; + + memctl->memc_mdr = 0xFFFDCC05; + memctl->memc_mcr = 0x011C | UPMB; +#endif /* CONFIG_CAN_DRIVER */ + + + return (size_b0 + size_b1); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile long int *addr; + ulong cnt, val; + ulong save[32]; /* to make test non-destructive */ + unsigned char i = 0; + + memctl->memc_mamr = mamr_value; + + for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + save[i++] = *addr; + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + save[i] = *addr; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + *addr = save[--i]; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + return (maxsize); +} + +/* ------------------------------------------------------------------------- */ |