diff options
author | Fabio Estevam <fabio.estevam@freescale.com> | 2013-03-15 10:43:48 (GMT) |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2013-03-20 10:47:37 (GMT) |
commit | e2d282a1b468559c5f7e847db75eeca99644148a (patch) | |
tree | 3229a6d2433a451ef2660f1ea8b289e1f9ce829c /board/wandboard/README | |
parent | 209b5710649cb855abe362268348df91bede6565 (diff) | |
download | u-boot-e2d282a1b468559c5f7e847db75eeca99644148a.tar.xz |
Add initial support for Wandboard dual lite and solo.
Wandboard is a development board that has two variants: one version based
on mx6 dual lite and another one based on mx6 solo.
For more details about Wandboard, please refer to: http://www.wandboard.org/
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'board/wandboard/README')
-rw-r--r-- | board/wandboard/README | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/board/wandboard/README b/board/wandboard/README new file mode 100644 index 0000000..e0b0b33 --- /dev/null +++ b/board/wandboard/README @@ -0,0 +1,40 @@ +U-Boot for Wandboard +-------------------- + +This file contains information for the port of U-Boot to the Wandboard. + +Wandboard is a development board that has two variants: one version based +on mx6 dual lite and another one based on mx6 solo. + +For more details about Wandboard, please refer to: +http://www.wandboard.org/ + +Building U-boot for Wandboard +----------------------------- + +To build U-Boot for the Wandboard Dual Lite version: + +$ make wanboard_dl_config +$ make + +To build U-Boot for the Wandboard Solo version: + +$ make wanboard_solo_config +$ make + +Flashing U-boot into the SD card +-------------------------------- + +- After the 'make' command completes, the generated 'u-boot.imx' binary must be +flashed into the SD card; + +$ sudo dd if=u-boot.imx of=/dev/mmcblk0 bs=512 seek=2; sync + +(Note - the SD card node may vary, so adjust this as needed). + +- Insert the SD card into the slot located in the bottom of the board (same side +as the mx6 processor) + +- Connect the serial cable to the host PC + +- Power up the board and U-boot messages will appear in the serial console. |