diff options
author | wdenk <wdenk> | 2004-09-29 22:43:59 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2004-09-29 22:43:59 (GMT) |
commit | a06752e36be7fc74b4a928026b63b1bf1764497e (patch) | |
tree | b71ddbcee4e4cc03e8ea98738b605a1c3879a703 /board/xilinx/xilinx_iic/xiic_l.h | |
parent | da93ed8147a000505ac7b7ed4e2fb50532596a3c (diff) | |
download | u-boot-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.xz |
* Patch by Sean Chang, 9 Aug 2004:
- Added I2C support for ML300.
- Added support for ML300 to read out its environment information
stored on the EEPROM.
- Added support to use board specific parameters as part of
U-Boot's environment information.
- Updated MLD files to support configuration for new features
above.
* Patches by Travis Sawyer, 5 Aug 2004:
- Remove incorrect bridge settings for eth group 6
- Add call to setup bridge in ppc_440x_eth_initialize
- Fix ppc_440x_eth_init to reset the phy only if its the
first time through, otherwise, just check the phy for the
autonegotiated speed/duplex. This allows the use of netconsole
- only print the speed/duplex the first time the phy is reset.
Diffstat (limited to 'board/xilinx/xilinx_iic/xiic_l.h')
-rw-r--r-- | board/xilinx/xilinx_iic/xiic_l.h | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/board/xilinx/xilinx_iic/xiic_l.h b/board/xilinx/xilinx_iic/xiic_l.h new file mode 100644 index 0000000..a2c4c49 --- /dev/null +++ b/board/xilinx/xilinx_iic/xiic_l.h @@ -0,0 +1,150 @@ +/* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */ +/***************************************************************************** +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" +* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND +* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, +* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, +* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION +* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, +* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE +* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY +* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE +* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR +* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF +* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE. +* +* (c) Copyright 2002 Xilinx Inc. +* All rights reserved. +* +*****************************************************************************/ +/****************************************************************************/ +/** +* +* @file xiic_l.h +* +* This header file contains identifiers and low-level driver functions (or +* macros) that can be used to access the device. High-level driver functions +* are defined in xiic.h. +* +* <pre> +* MODIFICATION HISTORY: +* +* Ver Who Date Changes +* ----- ---- -------- ----------------------------------------------- +* 1.00b jhl 05/07/02 First release +* 1.01c ecm 12/05/02 new rev +* </pre> +* +*****************************************************************************/ + +#ifndef XIIC_L_H /* prevent circular inclusions */ +#define XIIC_L_H /* by using protection macros */ + +/***************************** Include Files ********************************/ + +#include "xbasic_types.h" + +/************************** Constant Definitions ****************************/ + +#define XIIC_MSB_OFFSET 3 + +#define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET + +/* + * Register offsets in bytes from RegisterBase. Three is added to the + * base offset to access LSB (IBM style) of the word + */ +#define XIIC_CR_REG_OFFSET 0x00+XIIC_REG_OFFSET /* Control Register */ +#define XIIC_SR_REG_OFFSET 0x04+XIIC_REG_OFFSET /* Status Register */ +#define XIIC_DTR_REG_OFFSET 0x08+XIIC_REG_OFFSET /* Data Tx Register */ +#define XIIC_DRR_REG_OFFSET 0x0C+XIIC_REG_OFFSET /* Data Rx Register */ +#define XIIC_ADR_REG_OFFSET 0x10+XIIC_REG_OFFSET /* Address Register */ +#define XIIC_TFO_REG_OFFSET 0x14+XIIC_REG_OFFSET /* Tx FIFO Occupancy */ +#define XIIC_RFO_REG_OFFSET 0x18+XIIC_REG_OFFSET /* Rx FIFO Occupancy */ +#define XIIC_TBA_REG_OFFSET 0x1C+XIIC_REG_OFFSET /* 10 Bit Address reg */ +#define XIIC_RFD_REG_OFFSET 0x20+XIIC_REG_OFFSET /* Rx FIFO Depth reg */ + +/* Control Register masks */ + +#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */ +#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */ +#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */ +#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */ +#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */ +#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */ +#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */ + +/* Status Register masks */ + +#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */ +#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */ +#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */ +#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */ +#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */ +#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */ +#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */ + +/* IPIF Interrupt Status Register masks Interrupt occurs when... */ + +#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */ +#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete*/ +#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */ +#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level*/ +#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */ +#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */ +#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */ +#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */ + +/* IPIF Device Interrupt Register masks */ + +#define XIIC_IPIF_IIC_MASK 0x00000004UL /* 1=inter enabled */ +#define XIIC_IPIF_ERROR_MASK 0x00000001UL /* 1=inter enabled */ +#define XIIC_IPIF_INTER_ENABLE_MASK (XIIC_IPIF_IIC_MASK | \ + XIIC_IPIF_ERROR_MASK) + +#define XIIC_TX_ADDR_SENT 0x00 +#define XIIC_TX_ADDR_MSTR_RECV_MASK 0x02 + +/* The following constants specify the depth of the FIFOs */ + +#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */ +#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */ + +/* The following constants specify groups of interrupts that are typically + * enabled or disables at the same time + */ +#define XIIC_TX_INTERRUPTS \ + (XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | \ + XIIC_INTR_TX_HALF_MASK) + +#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS) + +/* The following constants are used with the following macros to specify the + * operation, a read or write operation. + */ +#define XIIC_READ_OPERATION 1 +#define XIIC_WRITE_OPERATION 0 + +/* The following constants are used with the transmit FIFO fill function to + * specify the role which the IIC device is acting as, a master or a slave. + */ +#define XIIC_MASTER_ROLE 1 +#define XIIC_SLAVE_ROLE 0 + +/**************************** Type Definitions ******************************/ + + +/***************** Macros (Inline Functions) Definitions ********************/ + + +/************************** Function Prototypes *****************************/ + +unsigned XIic_Recv(u32 BaseAddress, u8 Address, + u8 *BufferPtr, unsigned ByteCount); + +unsigned XIic_Send(u32 BaseAddress, u8 Address, + u8 *BufferPtr, unsigned ByteCount); + +#endif /* end of protection macro */ |