diff options
author | Tom Rini <trini@ti.com> | 2012-09-21 21:53:13 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2012-09-21 21:53:13 (GMT) |
commit | 495dbd72dd1172de866ba323263a5b62cf454972 (patch) | |
tree | 3ecfb8ae44c871055115941890fd93f175f8761d /board | |
parent | 50d924b45911b24eeb7623bed11b9297d99b840a (diff) | |
parent | d193c1b6eb05041c94ad9aacd8c94189d1dbc5f8 (diff) | |
download | u-boot-495dbd72dd1172de866ba323263a5b62cf454972.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Diffstat (limited to 'board')
31 files changed, 303 insertions, 206 deletions
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index 776226f..e98244b 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -267,9 +267,9 @@ int drv_video_init(void) display_height = 256; printf("%ld x %ld pixel matrix\n", display_width, display_height); - /* RWH = 7 | RWS =7 | TDF = 15 | NWS = 0x7F */ - csr = AT91_SMC_CSR_RWHOLD(7) | AT91_SMC_CSR_RWSETUP(7) | - AT91_SMC_CSR_TDF(15) | AT91_SMC_CSR_NWS(127) | + /* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */ + csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) | + AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) | AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 | AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN; writel(csr, &mc->smc.csr[2]); diff --git a/board/Marvell/sheevaplug/kwbimage.cfg b/board/Marvell/sheevaplug/kwbimage.cfg index 3b9c53f..55be3a3 100644 --- a/board/Marvell/sheevaplug/kwbimage.cfg +++ b/board/Marvell/sheevaplug/kwbimage.cfg @@ -21,8 +21,8 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure -# and create kirkwood boot image +# Refer to doc/README.kwbimage for more details about how-to +# configure and create kirkwood boot images. # # Boot Media configurations diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index a0a4d1d..93f12ea 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -78,7 +78,7 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0, SD slot, with 4-bit bus */ - tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); return 0; } diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts index 9faebd8..bb3851b 100644 --- a/board/avionic-design/dts/tegra20-tec.dts +++ b/board/avionic-design/dts/tegra20-tec.dts @@ -55,4 +55,15 @@ usb@c5004000 { status = "disabled"; }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; }; diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index fe15511..b3f31d6 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -158,7 +158,7 @@ static void set_led(int state) { switch (state) { case LED_OFF: - __set_led(0, 0, 0, 0, 0, 0); + __set_led(0, 0, 0, 1, 1, 1); break; case LED_ALARM_ON: __set_led(0, 0, 0, 0, 1, 1); @@ -192,6 +192,25 @@ int board_init(void) } #ifdef CONFIG_MISC_INIT_R +static void check_power_switch(void) +{ + if (kw_gpio_get_value(GPIO_POWER_SWITCH)) { + /* turn off HDD and USB power */ + kw_gpio_set_value(GPIO_HDD_POWER, 0); + kw_gpio_set_value(GPIO_USB_VBUS, 0); + set_led(LED_OFF); + + /* loop until released */ + while (kw_gpio_get_value(GPIO_POWER_SWITCH)) + ; + + /* turn power on again */ + kw_gpio_set_value(GPIO_HDD_POWER, 1); + kw_gpio_set_value(GPIO_USB_VBUS, 1); + set_led(LED_POWER_BLINKING); + } +} + void check_enetaddr(void) { uchar enetaddr[6]; @@ -261,6 +280,7 @@ static void check_push_button(void) int misc_init_r(void) { + check_power_switch(); check_enetaddr(); check_push_button(); diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index cd684f2..0f8f167 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -70,11 +70,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init eMMC\n"); /* init dev 0, eMMC chip, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra20_mmc_init(0, 4, -1, -1); + tegra_mmc_init(0, 4, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 3, SD slot, with 4-bit bus */ - tegra20_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); + tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); return 0; } diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 5dae15b..893cca8 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -69,10 +69,10 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */ - tegra20_mmc_init(0, 4, -1, GPIO_PP1); + tegra_mmc_init(0, 4, -1, GPIO_PP1); /* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */ - tegra20_mmc_init(3, 4, -1, -1); + tegra_mmc_init(3, 4, -1, -1); return 0; } diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644 --- a/board/freescale/mx28evk/iomux.c +++ b/board/freescale/mx28evk/iomux.c @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = { #define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ ADDR_PINS << 8 | APREBIT) -void mx28_adjust_memory_params(uint32_t *dram_vals) +void mxs_adjust_memory_params(uint32_t *dram_vals) { dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; } diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -49,8 +49,8 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); - /* SSP2 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + /* SSP2 clock at 160MHz */ + mx28_set_sspclk(MXC_SSPCLK2, 160000, 0); #ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README index 3d69ed5..7232b53 100644 --- a/board/freescale/mx35pdk/README +++ b/board/freescale/mx35pdk/README @@ -71,91 +71,17 @@ exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nf Flashing U-Boot -------------------------------- -There are two options: the original bootloader in NAND can be replaced with -u-boot, or u-boot can be stored on the NOR flash without erasing -the delivered bootloader. +U-boot should be stored on the NOR flash. + The boot storage can be select using the switches on the personality board (SW1-SW2) and on the DEBUG board (SW4-SW10). -The second option is to be preferred if you have not a JTAG debugger. If something goes wrong flashing the bootloader, it is always possible to recover the board booting from the other device. -Replacing the bootloader on the NAND --------------------------------------- -To replace RedBoot with U-Boot, the easy way is to do this in linux. -Start the kernel with the suggested options. Make sure to have set the -mtdparts exactly as described, because this matches the layout on the -mx35pdk. - -You should see in your boot log the following entries for the NAND -flash: - -5 cmdlinepart partitions found on MTD device mxc_nand -Creating 5 MTD partitions on "mxc_nand": -0x000000000000-0x000000100000 : "boot" -0x000000100000-0x000000600000 : "linux" -0x000000600000-0x000006600000 : "root" -0x000006600000-0x000006e00000 : "cfg" -0x000006e00000-0x000080000000 : "user" - -You can use the utilities flash_eraseall and nandwrite to put -u-boot on the NAND. The bootloader is marked as "boot", and 1MB is -reserved. If everything is correct, this partition is accessed as -/dev/mtd4. However, check if it is correct with "cat /proc/mtd" and -get the device node from the partition name: - -$ cat /proc/mtd | grep boot - -I suggest you try the utilities on a different partition to be sure -if everything works correctly. If not, and you remove RedBoot, you have to -reinstall it using the ATK tool as suggested by Freescale, or using a -JTAG debugger. - -I report the versions of the utilities I used (they are provided with ELDK): - --bash-3.2# nandwrite --version -nandwrite $Revision: 1.32 $ - -flash_eraseall --version -flash_eraseall $Revision: 1.22 $ - -nandwrite reports a warning if the file to be saved is not sector aligned. -This should have no consequences, but I preferred to pad u-boot.bin -to get no problem at all. -$ dd if=/dev/zero of=zeros bs=1 count=74800 -$ cat u-boot.bin zeros > u-boot-padded.bin - -To erase the partition: -$ flash_eraseall /dev/mtd4 - -Writing u-boot: - -$ nandwrite /dev/mtd4 u-boot-padded.bin - -Now U-Boot is stored on the booting partition. - -To boot from NAND, you have to select the switches as follows: - -Personality board - SW2 1, 4, 5 on - 2, 3, 6, 7, 8 off - SW1 all off - -Debug Board: - SW5 0 - SW6 0 - SW7 0 - SW8 1 - SW9 1 - SW10 0 - - Saving U-Boot in the NOR flash --------------------------------- -The procedure to save in the NOR flash is quite the same as to write into the NAND. - Check the partition for boot in the NOR flash. Setting the mtdparts as reported, the boot partition should be /dev/mtd0. diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index 787c923..7cb6b30 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -32,6 +32,8 @@ #include <i2c.h> #include <pmic.h> #include <fsl_pmic.h> +#include <mmc.h> +#include <fsl_esdhc.h> #include <mc9sdz60.h> #include <mc13892.h> #include <linux/types.h> @@ -275,3 +277,26 @@ int board_eth_init(bd_t *bis) return rc; } + +#if defined(CONFIG_FSL_ESDHC) + +struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; + +int board_mmc_init(bd_t *bis) +{ + /* configure pins for SDHC1 only */ + mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + + return fsl_esdhc_initialize(bis, &esdhc_cfg); +} + +int board_mmc_getcd(struct mmc *mmc) +{ + return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4); +} +#endif diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 909ccca..4b4e89b 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -197,18 +197,18 @@ static iomux_v3_cfg_t button_pads[] = { static void setup_iomux_enet(void) { - gpio_direction_output(87, 0); /* GPIO 3-23 */ - gpio_direction_output(190, 1); /* GPIO 6-30 */ - gpio_direction_output(185, 1); /* GPIO 6-25 */ - gpio_direction_output(187, 1); /* GPIO 6-27 */ - gpio_direction_output(188, 1); /* GPIO 6-28*/ - gpio_direction_output(189, 1); /* GPIO 6-29 */ + gpio_direction_output(IMX_GPIO_NR(3, 23), 0); + gpio_direction_output(IMX_GPIO_NR(6, 30), 1); + gpio_direction_output(IMX_GPIO_NR(6, 25), 1); + gpio_direction_output(IMX_GPIO_NR(6, 27), 1); + gpio_direction_output(IMX_GPIO_NR(6, 28), 1); + gpio_direction_output(IMX_GPIO_NR(6, 29), 1); imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); - gpio_direction_output(184, 1); /* GPIO 6-24 */ + gpio_direction_output(IMX_GPIO_NR(6, 24), 1); /* Need delay 10ms according to KSZ9021 spec */ udelay(1000 * 10); - gpio_set_value(87, 1); /* GPIO 3-23 */ + gpio_set_value(IMX_GPIO_NR(3, 23), 1); imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); } @@ -249,11 +249,11 @@ int board_mmc_getcd(struct mmc *mmc) int ret; if (cfg->esdhc_base == USDHC3_BASE_ADDR) { - gpio_direction_input(192); /*GPIO7_0*/ - ret = !gpio_get_value(192); + gpio_direction_input(IMX_GPIO_NR(7, 0)); + ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); } else { - gpio_direction_input(38); /*GPIO2_6*/ - ret = !gpio_get_value(38); + gpio_direction_input(IMX_GPIO_NR(2, 6)); + ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); } return ret; diff --git a/board/genesi/mx51_efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile index bd2174f..f95356f 100644 --- a/board/genesi/mx51_efikamx/Makefile +++ b/board/genesi/mx51_efikamx/Makefile @@ -27,11 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := efikamx.o - -ifdef CONFIG_CMD_USB -COBJS += efikamx-usb.o -endif +COBJS := efikamx.o efikamx-usb.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c index e9273d0..cf020c3 100644 --- a/board/genesi/mx51_efikamx/efikamx-usb.c +++ b/board/genesi/mx51_efikamx/efikamx-usb.c @@ -214,3 +214,15 @@ void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) if (port) mdelay(10); } + +/* + * Ethernet on the Smarttop is on the USB bus. Rather than give an error about + * "CPU Net Initialization Failed", just pass this test since no other settings + * are required. Smartbook doesn't have built-in Ethernet but we will let it + * pass anyway considering someone may have plugged in a USB stick and all + * they need to do is run "usb start". + */ +int board_eth_init(bd_t *bis) +{ + return 0; +} diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index 6d98c94..cfd2e93 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -492,9 +492,6 @@ int board_late_init(void) ARRAY_SIZE(efikamx_pata_pads)); setup_iomux_usb(); - if (machine_is_efikasb()) - setenv("preboot", "usb reset ; setenv stdin usbkbd\0"); - return 0; } diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index 9bc3c21..eaa924f 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -163,7 +163,7 @@ static int ivm_findinventorystring(int type, if (addr == INVENTORYDATASIZE) { xcode = -1; printf("Error end of string not found\n"); - } else if ((size >= (maxlen - 1)) && + } else if ((size > (maxlen - 1)) && (buf[addr] != '\r')) { xcode = -1; printf("string too long till next CR\n"); diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 930c80e..be8f51c 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -331,26 +331,6 @@ void board_spi_release_bus(struct spi_slave *slave) kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1); } -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - /* Fix this */ - gd->ram_size = get_ram_size((void *)kw_sdram_bar(0), - kw_sdram_bs(0)); - return 0; -} - -void dram_init_banksize(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i), - kw_sdram_bs(i)); - } -} - #if (defined(CONFIG_KM_PIGGY4_88E6061)) #define PHY_LED_SEL_REG 0x18 diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 7ab2040..afe832a 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -45,8 +45,8 @@ DECLARE_GLOBAL_DATA_PTR; -const struct tegra20_sysinfo sysinfo = { - CONFIG_TEGRA20_BOARD_STRING +const struct tegra_sysinfo sysinfo = { + CONFIG_TEGRA_BOARD_STRING }; #ifndef CONFIG_SPL_BUILD @@ -79,7 +79,7 @@ void pin_mux_spi(void) __attribute__((weak, alias("__pin_mux_spi"))); static void power_det_init(void) { #if defined(CONFIG_TEGRA20) - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; /* turn off power detects */ writel(0, &pmc->pmc_pwr_det_latch); @@ -132,7 +132,7 @@ int board_init(void) board_usb_init(gd->fdt_blob); #endif -#ifdef CONFIG_TEGRA20_LP0 +#ifdef CONFIG_TEGRA_LP0 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ warmboot_save_sdram_params(); diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index c351954..ca5facb 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -54,4 +54,14 @@ usb@c5004000 { status = "disabled"; }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; }; diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index 3352539..25a63a0 100644 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts @@ -153,4 +153,14 @@ 0x1f04008a>; linux,fn-keymap = <0x05040002>; }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; }; diff --git a/board/nvidia/harmony/Makefile b/board/nvidia/harmony/Makefile index b6efa1c..88b9dcf 100644 --- a/board/nvidia/harmony/Makefile +++ b/board/nvidia/harmony/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index 44977c7..b4a811d 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -73,11 +73,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init SD slot J26\n"); /* init dev 0, SD slot J26, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); debug("board_mmc_init: init SD slot J5\n"); /* init dev 2, SD slot J5, with 4-bit bus */ - tegra20_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); + tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); return 0; } diff --git a/board/nvidia/seaboard/Makefile b/board/nvidia/seaboard/Makefile index b6efa1c..88b9dcf 100644 --- a/board/nvidia/seaboard/Makefile +++ b/board/nvidia/seaboard/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 3298a6b..667f60a 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -81,11 +81,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init eMMC\n"); /* init dev 0, eMMC chip, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra20_mmc_init(0, 4, -1, -1); + tegra_mmc_init(0, 4, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 1, SD slot, with 4-bit bus */ - tegra20_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); + tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); return 0; } diff --git a/board/nvidia/ventana/Makefile b/board/nvidia/ventana/Makefile index e3b7435..147d0bc 100644 --- a/board/nvidia/ventana/Makefile +++ b/board/nvidia/ventana/Makefile @@ -24,9 +24,7 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common $(obj)../seaboard) -endif +$(shell mkdir -p $(obj)../seaboard) LIB = $(obj)lib$(BOARD).o diff --git a/board/nvidia/whistler/Makefile b/board/nvidia/whistler/Makefile index a910577..913f1ce 100644 --- a/board/nvidia/whistler/Makefile +++ b/board/nvidia/whistler/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c index c0a114d..598b2e5 100644 --- a/board/nvidia/whistler/whistler.c +++ b/board/nvidia/whistler/whistler.c @@ -81,10 +81,10 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */ - tegra20_mmc_init(0, 8, -1, -1); + tegra_mmc_init(0, 8, -1, -1); /* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */ - tegra20_mmc_init(1, 8, -1, -1); + tegra_mmc_init(1, 8, -1, -1); return 0; } diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c index 5e07bf8..06df0af 100644 --- a/board/taskit/stamp9g20/stamp9g20.c +++ b/board/taskit/stamp9g20/stamp9g20.c @@ -159,15 +159,28 @@ int board_early_init_f(void) return 0; } -int board_init(void) +int board_postclk_init(void) { - /* Adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + /* + * Initialize the serial interface here, because be need a running + * timer to set PC9 to high and wait for some time to enable the + * level converter of the RS232 interface on the PortuxG20 board. + */ - /* Enable the serial interface */ +#ifdef CONFIG_PORTUXG20 at91_set_gpio_output(AT91_PIN_PC9, 1); + mdelay(1); +#endif at91_seriald_hw_init(); + return 0; +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + stamp9G20_nand_hw_init(); #ifdef CONFIG_MACB stamp9G20_macb_hw_init(); diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index c2b10ac..7429e93 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -100,8 +100,18 @@ int board_init(void) int misc_init_r(void) { + char *eth_addr; + dieid_num_r(); + eth_addr = getenv("ethaddr"); + if (eth_addr) + return 0; + +#ifndef CONFIG_SPL_BUILD + TAM3517_READ_MAC_FROM_EEPROM; +#endif + return 0; } diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index 9fbaedd..b8ad447 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -21,13 +21,17 @@ #include <common.h> #include <netdev.h> +#include <malloc.h> #include <fpga.h> +#include <video_fb.h> #include <asm/io.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/omap_gpio.h> #include <asm/arch/mmc_host_def.h> +#include <asm/arch/dss.h> +#include <asm/arch/clocks.h> #include <i2c.h> #include <spartan3.h> #include <asm/gpio.h> @@ -39,6 +43,9 @@ DECLARE_GLOBAL_DATA_PTR; +#define BUZZER 140 +#define SPEAKER 141 + #ifndef CONFIG_FPGA #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled" #endif @@ -50,6 +57,42 @@ DECLARE_GLOBAL_DATA_PTR; #define FPGA_INIT 119 #define FPGA_DONE 154 +#define LCD_PWR 138 +#define LCD_PON_PIN 139 + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +static struct { + u32 xres; + u32 yres; +} panel_resolution[] = { + { 480, 272 }, + { 800, 480 } +}; + +static struct panel_config lcd_cfg[] = { + { + .timing_h = PANEL_TIMING_H(4, 8, 41), + .timing_v = PANEL_TIMING_V(2, 4, 10), + .pol_freq = 0x00000000, /* Pol Freq */ + .divisor = 0x0001000d, /* 33Mhz Pixel Clock */ + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = 0, + }, + { + .timing_h = PANEL_TIMING_H(20, 192, 4), + .timing_v = PANEL_TIMING_V(2, 20, 10), + .pol_freq = 0x00004000, /* Pol Freq */ + .divisor = 0x0001000E, /* 36Mhz Pixel Clock */ + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = 0, + } +}; +#endif + /* Timing definitions for FPGA */ static const u32 gpmc_fpga[] = { FPGA_GPMC_CONFIG1, @@ -193,6 +236,33 @@ int board_init(void) mt_ventoux_init_fpga(); + /* GPIO_140: speaker #mute */ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) + /* GPIO_141: Buzz Hi */ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) + + /* Turning off the buzzer */ + gpio_request(BUZZER, "BUZZER_MUTE"); + gpio_request(SPEAKER, "SPEAKER"); + gpio_direction_output(BUZZER, 0); + gpio_direction_output(SPEAKER, 0); + + return 0; +} + +int misc_init_r(void) +{ + char *eth_addr; + + dieid_num_r(); + + eth_addr = getenv("ethaddr"); + if (eth_addr) + return 0; + +#ifndef CONFIG_SPL_BUILD + TAM3517_READ_MAC_FROM_EEPROM; +#endif return 0; } @@ -224,3 +294,46 @@ int board_mmc_init(bd_t *bis) return omap_mmc_init(0, 0, 0); } #endif + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +int board_video_init(void) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + struct panel_config *panel = &lcd_cfg[0]; + char *s; + u32 index = 0; + + void *fb; + + fb = (void *)0x88000000; + + s = getenv("panel"); + if (s) { + index = simple_strtoul(s, NULL, 10); + if (index < ARRAY_SIZE(lcd_cfg)) + panel = &lcd_cfg[index]; + else + return 0; + } + + panel->frame_buffer = fb; + printf("Panel: %dx%d\n", panel_resolution[index].xres, + panel_resolution[index].yres); + panel->lcd_size = (panel_resolution[index].yres - 1) << 16 | + (panel_resolution[index].xres - 1); + + gpio_request(LCD_PWR, "LCD Power"); + gpio_request(LCD_PON_PIN, "LCD Pon"); + gpio_direction_output(LCD_PWR, 0); + gpio_direction_output(LCD_PON_PIN, 1); + + + setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON); + setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON); + + omap3_dss_panel_config(panel); + omap3_dss_enable(); + + return 0; +} +#endif diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h index 9b2e43e..1cd7ec2 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.h +++ b/board/teejet/mt_ventoux/mt_ventoux.h @@ -142,7 +142,8 @@ const omap3_sysinfo sysinfo = { /*GPIO_62: FPGA_RESET */ \ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/ \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \ + /* GPIO_64*/ \ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \ /* DSS */\ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ @@ -174,26 +175,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ /* CAMERA */\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ @@ -209,6 +190,7 @@ const omap3_sysinfo sysinfo = { /* GPIO_126: CardDetect */\ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \ + /*GPIO_128 */ \ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ \ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ @@ -221,7 +203,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \ MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \ /* GPIO_138: LCD_ENVD */\ - MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(MMC2_DAT7), (IDIS | PTD | EN | M4)) \ /* GPIO_139: LCD_PON */\ /* McBSP */\ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ @@ -241,16 +223,12 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCBSP2_DX), (IEN | PTD | EN | M4)) \ /* GPIO_119: FPGA_INIT */ \ \ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) \ - /* GPIO_140: speaker #mute */\ - MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) \ - /* GPIO_141: Buzz Hi */\ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \ \ MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M4)) \ /*GPIO_152: Ignition Sense */ \ - MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) \ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M4)) \ /*GPIO_153: Power Button Sense */ \ MUX_VAL(CP(MCBSP4_DX), (IEN | PTU | DIS | M4)) \ /* GPIO_154: FPGA_DONE */ \ @@ -264,10 +242,14 @@ const omap3_sysinfo sysinfo = { /* GPIO_150: USB status 1 */\ \ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M2)) \ + /* gpt9_pwm */\ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M2)) \ + /* gpt10_pwm */\ + MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M2)) \ + /* gpt8_pwm */\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M2)) \ + /* gpt11_pwm */\ \ MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4)) \ /*GPIO_163 : TS_PENIRQ*/ \ @@ -299,22 +281,24 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) \ /* CCDC */\ - MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M4)) \ + /* GPIO94 */\ MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M4)) \ /* GPIO95: #Enable Output */\ - MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M4)) \ /* GPIO 99: #SOM_PWR_OFF */\ - MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M4)) \ MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M4)) \ /* GPIO_100: #power out */\ - MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M4)) \ + /* GPIO_102 */\ + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M4)) \ /* RMII */\ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ @@ -363,7 +347,8 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ \ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) \ + /* gpio_10 */\ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \ /* JTAG */\ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \ @@ -387,12 +372,15 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \ - MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | EN | M4)) \ + /* gpio_24 */\ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) \ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M4)) \ + /* gpio_26 */\ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) \ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)) \ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)) \ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \ + /* gpio_29 */\ /* Die to Die */\ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ |