armv8: ls1088aqds: Add support of LS1088AQDS

This patch add support of LS1088AQDS platform.

The LS1088A QorIQTM Development System (QDS) is a high-performance
computing, evaluation, and development platform that supports the
LS1088A QorIQ Architecture processor.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

8 files changed, 843 insertions, 5 deletions

diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig
index a4d8223..1ada661 100644
--- a/board/freescale/ls1088a/Kconfig
+++ b/board/freescale/ls1088a/Kconfig
@@ -1,3 +1,19 @@
+if TARGET_LS1088AQDS
+
+config SYS_BOARD
+	default "ls1088a"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1088aqds"
+
+endif
+
 if TARGET_LS1088ARDB
 
 config SYS_BOARD
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index 12834f6..e1e6d4b 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -5,3 +5,11 @@ S:	Maintained
 F:	board/freescale/ls1088a/
 F:	include/configs/ls1088ardb.h
 F:	configs/ls1088ardb_qspi_defconfig
+
+LS1088AQDS BOARD
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+M:	Ashish Kumar <Ashish.Kumar@nxp.com>
+S:	Maintained
+F:	board/freescale/ls1088a/
+F:	include/configs/ls1088aqds.h
+F:	configs/ls1088aqds_qspi_defconfig
diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile
index e997cf1..bdcce9e 100644
--- a/board/freescale/ls1088a/Makefile
+++ b/board/freescale/ls1088a/Makefile
@@ -6,4 +6,5 @@
 
 obj-y += ls1088a.o
 obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o
+obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o
 obj-y += ddr.o
diff --git a/board/freescale/ls1088a/README b/board/freescale/ls1088a/README
index 3f4d987..aa0fb6a 100644
--- a/board/freescale/ls1088a/README
+++ b/board/freescale/ls1088a/README
@@ -64,3 +64,82 @@ Alternately you can use this command to switch from QSPI to SD
  - JTAG support
  - QSPI emulator support
  - TDM riser support
+
+QDS Default Switch Settings (1: ON; 0: OFF)
+-------------------------------------------
+
+For 16b IFC-NOR
+SW1 0001 0010
+SW2 x110 1111
+
+For QSPI Boot
+SW1 0011 0001
+SW2 0110 1111
+
+For SD Boot
+SW1 0010 0000
+SW2 0110 1111
+
+For eMMC Boot
+SW1 0010 0000
+SW2 1110 1111
+
+For I2C (ext. addr.)
+SW1 0010 0100
+SW2 1110 1111
+
+SW3 to SW12 are identical for all boot source
+
+SW3 0010 0100
+SW4 0010 0000
+SW5 1110 0111
+SW6 1110 1000
+SW7 0001 1101
+SW8 0000 1101
+SW9 1100 1010
+SW10 1110 1000
+SW11 1111 0100
+SW12 1111 1111
+
+ LS1088AQDS board Overview
+ -------------------------
+ - SERDES Connections, 16 lanes supporting:
+      - PCI Express - 3.0
+      - SATA 3.0
+      - 2 XFI
+      - QSGMII, SGMII with help for Riser card
+      - 2 RGMII
+      - 5 slot for Riser card or PCIe NIC
+ - DDR Controller
+     - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
+       chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
+       with FSL refernce software is 2100MT/s
+ - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
+ - IFC/Local Bus
+    - One 2 GB NAND flash with ECC support, not as boot source
+    - CPLD of size 2K
+ - USB 3.0
+    - Two high speed USB 3.0 ports
+    - First USB 3.0 port configured as Host with Type-A connector
+    - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC/eMMC
+    - SDHC/eMMC slot via adaptor
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - 2 UART
+ - JTAG support
+ - DSPI
+ - PROMJET support
+ - QSPI emulator support
+ - TDM riser support
+
+QSPI flash memory map valid for both QDS and RDB
+  Image                               Flash Offset
+ RCW+PBI                             0x00000000
+ Boot firmware (U-Boot)              0x00100000
+ Boot firmware Environment           0x00300000
+ PPA firmware                        0x00400000
+ DPAA2 MC                            0x00A00000
+ DPAA2 DPL                           0x00D00000
+ DPAA2 DPC                           0x00E00000
+ Kernel.itb                          0x01000000
diff --git a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h
index dfcfc1f..a1ad709 100644
--- a/board/freescale/ls1088a/ddr.h
+++ b/board/freescale/ls1088a/ddr.h
@@ -34,6 +34,11 @@ static const struct board_specific_parameters udimm0[] = {
 	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
 	{2,  2300, 0, 8,     9, 0x0A0C0E11, 0x1214160F,},
 	{}
+#elif defined(CONFIG_TARGET_LS1088AQDS)
+	{2,  1666, 0, 8,     8, 0x0A0A0C0E, 0x0F10110C,},
+	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2300, 0, 4,     9, 0x0A0C0D11, 0x1214150E,},
+	{}
 
 #endif
 };
diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c
new file mode 100644
index 0000000..a912ff7
--- /dev/null
+++ b/board/freescale/ls1088a/eth_ls1088aqds.c
@@ -0,0 +1,650 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+#include <hwconfig.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+#include "../common/qixis.h"
+
+#include "ls1088a_qixis.h"
+
+#define MC_BOOT_ENV_VAR "mcinitcmd"
+
+#ifdef CONFIG_FSL_MC_ENET
+
+#define SFP_TX		0
+
+ /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
+ *   Bank 1 -> Lanes A, B, C, D,
+ *   Bank 2 -> Lanes A,B, C, D,
+ */
+
+ /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
+  * means that the mapping must be determined dynamically, or that the lane
+  * maps to something other than a board slot.
+  */
+
+static u8 lane_to_slot_fsm1[] = {
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
+ * housed.
+ */
+
+static int xqsgii_riser_phy_addr[] = {
+	XQSGMII_CARD_PHY1_PORT0_ADDR,
+	XQSGMII_CARD_PHY2_PORT0_ADDR,
+	XQSGMII_CARD_PHY3_PORT0_ADDR,
+	XQSGMII_CARD_PHY4_PORT0_ADDR,
+	XQSGMII_CARD_PHY3_PORT2_ADDR,
+	XQSGMII_CARD_PHY1_PORT2_ADDR,
+	XQSGMII_CARD_PHY4_PORT2_ADDR,
+	XQSGMII_CARD_PHY2_PORT2_ADDR,
+};
+
+static int sgmii_riser_phy_addr[] = {
+	SGMII_CARD_PORT1_PHY_ADDR,
+	SGMII_CARD_PORT2_PHY_ADDR,
+	SGMII_CARD_PORT3_PHY_ADDR,
+	SGMII_CARD_PORT4_PHY_ADDR,
+};
+
+/* Slot2 does not have EMI connections */
+#define EMI_NONE	0xFF
+#define EMI1_RGMII1	0
+#define EMI1_RGMII2	1
+#define EMI1_SLOT1	2
+
+static const char * const mdio_names[] = {
+	"LS1088A_QDS_MDIO0",
+	"LS1088A_QDS_MDIO1",
+	"LS1088A_QDS_MDIO2",
+	DEFAULT_WRIOP_MDIO2_NAME,
+};
+
+struct ls1088a_qds_mdio {
+	u8 muxval;
+	struct mii_dev *realbus;
+};
+
+static void sgmii_configure_repeater(int dpmac)
+{
+	struct mii_dev *bus;
+	uint8_t a = 0xf;
+	int i, j, ret;
+	unsigned short value;
+	const char *dev = "LS1088A_QDS_MDIO2";
+	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
+	int i2c_phy_addr = 0;
+	int phy_addr = 0;
+
+	uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+
+	/* Set I2c to Slot 1 */
+	i2c_write(0x77, 0, 0, &a, 1);
+
+	switch (dpmac) {
+	case 1:
+		i2c_phy_addr = i2c_addr[1];
+		phy_addr = 4;
+		break;
+	case 2:
+		i2c_phy_addr = i2c_addr[0];
+		phy_addr = 0;
+		break;
+	case 3:
+		i2c_phy_addr = i2c_addr[3];
+		phy_addr = 0xc;
+		break;
+	case 7:
+		i2c_phy_addr = i2c_addr[2];
+		phy_addr = 8;
+		break;
+	}
+
+	/* Check the PHY status */
+	ret = miiphy_set_current_dev(dev);
+	if (ret > 0)
+		goto error;
+
+	bus = mdio_get_current_dev();
+	debug("Reading from bus %s\n", bus->name);
+
+	ret = miiphy_write(dev, phy_addr, 0x1f, 3);
+	if (ret > 0)
+		goto error;
+
+	mdelay(10);
+	ret = miiphy_read(dev, phy_addr, 0x11, &value);
+	if (ret > 0)
+			goto error;
+
+	mdelay(10);
+
+	if ((value & 0xfff) == 0x401) {
+		miiphy_write(dev, phy_addr, 0x1f, 0);
+		printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		for (j = 0; j < 4; j++) {
+			a = 0x18;
+			i2c_write(i2c_phy_addr, 6, 1, &a, 1);
+			a = 0x38;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			a = 0x4;
+			i2c_write(i2c_phy_addr, 8, 1, &a, 1);
+
+			i2c_write(i2c_phy_addr, 0xf, 1,
+				  &ch_a_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x11, 1,
+				  &ch_a_ctl2[j], 1);
+
+			i2c_write(i2c_phy_addr, 0x16, 1,
+				  &ch_b_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x18, 1,
+				  &ch_b_ctl2[j], 1);
+
+			a = 0x14;
+			i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
+			a = 0xb5;
+			i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
+			a = 0x20;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			mdelay(100);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+
+			mdelay(100);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+
+			if ((value & 0xfff) == 0x401) {
+				printf("DPMAC %d :PHY is configured ",
+				       dpmac);
+				printf("after setting repeater 0x%x\n",
+				       value);
+				i = 5;
+				j = 5;
+			} else {
+				printf("DPMAC %d :PHY is failed to ",
+				       dpmac);
+				printf("configure the repeater 0x%x\n", value);
+			}
+		}
+	}
+	miiphy_write(dev, phy_addr, 0x1f, 0);
+error:
+	if (ret)
+		printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
+	return;
+}
+
+static void qsgmii_configure_repeater(int dpmac)
+{
+	uint8_t a = 0xf;
+	int i, j;
+	int i2c_phy_addr = 0;
+	int phy_addr = 0;
+	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
+
+	uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+
+	const char *dev = mdio_names[EMI1_SLOT1];
+	int ret = 0;
+	unsigned short value;
+
+	/* Set I2c to Slot 1 */
+	i2c_write(0x77, 0, 0, &a, 1);
+
+	switch (dpmac) {
+	case 7:
+	case 8:
+	case 9:
+	case 10:
+		i2c_phy_addr = i2c_addr[2];
+		phy_addr = 8;
+		break;
+
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		i2c_phy_addr = i2c_addr[3];
+		phy_addr = 0xc;
+		break;
+	}
+
+	/* Check the PHY status */
+	ret = miiphy_set_current_dev(dev);
+	ret = miiphy_write(dev, phy_addr, 0x1f, 3);
+	mdelay(10);
+	ret = miiphy_read(dev, phy_addr, 0x11, &value);
+	mdelay(10);
+	ret = miiphy_read(dev, phy_addr, 0x11, &value);
+	mdelay(10);
+	if ((value & 0xf) == 0xf) {
+		miiphy_write(dev, phy_addr, 0x1f, 0);
+		printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		for (j = 0; j < 4; j++) {
+			a = 0x18;
+			i2c_write(i2c_phy_addr, 6, 1, &a, 1);
+			a = 0x38;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			a = 0x4;
+			i2c_write(i2c_phy_addr, 8, 1, &a, 1);
+
+			i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
+
+			i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
+
+			a = 0x14;
+			i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
+			a = 0xb5;
+			i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
+			a = 0x20;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			mdelay(100);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+			mdelay(1);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+			mdelay(10);
+			if ((value & 0xf) == 0xf) {
+				miiphy_write(dev, phy_addr, 0x1f, 0);
+				printf("DPMAC %d :PHY is ..... Configured\n",
+				       dpmac);
+				return;
+			}
+		}
+	}
+error:
+	printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
+	return;
+}
+
+static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
+{
+	return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+	struct mii_dev *bus;
+	const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
+
+	if (!name) {
+		printf("No bus for muxval %x\n", muxval);
+		return NULL;
+	}
+
+	bus = miiphy_get_dev_by_name(name);
+
+	if (!bus) {
+		printf("No bus by name %s\n", name);
+		return NULL;
+	}
+
+	return bus;
+}
+
+static void ls1088a_qds_enable_SFP_TX(u8 muxval)
+{
+	u8 brdcfg9;
+
+	brdcfg9 = QIXIS_READ(brdcfg[9]);
+	brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
+	brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
+	QIXIS_WRITE(brdcfg[9], brdcfg9);
+}
+
+static void ls1088a_qds_mux_mdio(u8 muxval)
+{
+	u8 brdcfg4;
+
+	if (muxval <= 5) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+	}
+}
+
+static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
+				 int devad, int regnum)
+{
+	struct ls1088a_qds_mdio *priv = bus->priv;
+
+	ls1088a_qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+				  int regnum, u16 value)
+{
+	struct ls1088a_qds_mdio *priv = bus->priv;
+
+	ls1088a_qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
+{
+	struct ls1088a_qds_mdio *priv = bus->priv;
+
+	return priv->realbus->reset(priv->realbus);
+}
+
+static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
+{
+	struct ls1088a_qds_mdio *pmdio;
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate ls1088a_qds MDIO bus\n");
+		return -1;
+	}
+
+	pmdio = malloc(sizeof(*pmdio));
+	if (!pmdio) {
+		printf("Failed to allocate ls1088a_qds private data\n");
+		free(bus);
+		return -1;
+	}
+
+	bus->read = ls1088a_qds_mdio_read;
+	bus->write = ls1088a_qds_mdio_write;
+	bus->reset = ls1088a_qds_mdio_reset;
+	sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
+
+	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+	if (!pmdio->realbus) {
+		printf("No bus with name %s\n", realbusname);
+		free(bus);
+		free(pmdio);
+		return -1;
+	}
+
+	pmdio->muxval = muxval;
+	bus->priv = pmdio;
+
+	return mdio_register(bus);
+}
+
+/*
+ * Initialize the dpmac_info array.
+ *
+ */
+static void initialize_dpmac_to_slot(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	switch (serdes1_prtcl) {
+	case 0x12:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
+		break;
+	case 0x15:
+	case 0x1D:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[2] = EMI_NONE;
+		lane_to_slot_fsm1[3] = EMI_NONE;
+		break;
+	case 0x1E:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[3] = EMI_NONE;
+		break;
+	case 0x3A:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI_NONE;
+		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
+		break;
+
+	default:
+		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
+		       __func__, serdes1_prtcl);
+		break;
+	}
+}
+
+void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
+{
+	struct mii_dev *bus;
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	int *riser_phy_addr;
+	char *env_hwconfig = env_get("hwconfig");
+
+	if (hwconfig_f("xqsgmii", env_hwconfig))
+		riser_phy_addr = &xqsgii_riser_phy_addr[0];
+	else
+		riser_phy_addr = &sgmii_riser_phy_addr[0];
+
+	switch (serdes1_prtcl) {
+	case 0x12:
+	case 0x15:
+	case 0x1E:
+	case 0x3A:
+		switch (dpmac_id) {
+		case 1:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[1]);
+			break;
+		case 2:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[0]);
+			break;
+		case 3:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[3]);
+			break;
+		case 7:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[2]);
+			break;
+		default:
+			printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
+			break;
+		}
+		break;
+	default:
+		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
+		       __func__, serdes1_prtcl);
+		return;
+	}
+	dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
+	bus = mii_dev_for_muxval(EMI1_SLOT1);
+	wriop_set_mdio(dpmac_id, bus);
+}
+
+void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
+{
+	struct mii_dev *bus;
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	switch (serdes1_prtcl) {
+	case 0x1D:
+	case 0x1E:
+		switch (dpmac_id) {
+		case 3:
+		case 4:
+		case 5:
+		case 6:
+			wriop_set_phy_address(dpmac_id, dpmac_id + 9);
+			break;
+		case 7:
+		case 8:
+		case 9:
+		case 10:
+			wriop_set_phy_address(dpmac_id, dpmac_id + 1);
+			break;
+		}
+
+		dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
+		bus = mii_dev_for_muxval(EMI1_SLOT1);
+		wriop_set_mdio(dpmac_id, bus);
+		break;
+	default:
+		printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		break;
+	}
+}
+
+void ls1088a_handle_phy_interface_xsgmii(int i)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	switch (serdes1_prtcl) {
+	case 0x15:
+	case 0x1D:
+	case 0x1E:
+		wriop_set_phy_address(i, i + 26);
+		ls1088a_qds_enable_SFP_TX(SFP_TX);
+		break;
+	default:
+		printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		break;
+	}
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int error = 0, i;
+	char *mc_boot_env_var;
+#ifdef CONFIG_FSL_MC_ENET
+	struct memac_mdio_info *memac_mdio0_info;
+	char *env_hwconfig = env_get("hwconfig");
+
+	initialize_dpmac_to_slot();
+
+	memac_mdio0_info = (struct memac_mdio_info *)malloc(
+					sizeof(struct memac_mdio_info));
+	memac_mdio0_info->regs =
+		(struct memac_mdio_controller *)
+					CONFIG_SYS_FSL_WRIOP1_MDIO1;
+	memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
+
+	/* Register the real MDIO1 bus */
+	fm_memac_mdio_init(bis, memac_mdio0_info);
+
+	/* Register the muxing front-ends to the MDIO buses */
+	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
+	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
+	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
+
+	for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
+		switch (wriop_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_QSGMII:
+			ls1088a_handle_phy_interface_qsgmii(i);
+			break;
+		case PHY_INTERFACE_MODE_SGMII:
+			ls1088a_handle_phy_interface_sgmii(i);
+			break;
+		case PHY_INTERFACE_MODE_XGMII:
+			ls1088a_handle_phy_interface_xsgmii(i);
+			break;
+		default:
+			break;
+
+		if (i == 16)
+			i = NUM_WRIOP_PORTS;
+		}
+	}
+
+	mc_boot_env_var = env_get(MC_BOOT_ENV_VAR);
+	if (mc_boot_env_var)
+		run_command_list(mc_boot_env_var, -1, 0);
+	error = cpu_eth_init(bis);
+
+	if (hwconfig_f("xqsgmii", env_hwconfig)) {
+		for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
+			switch (wriop_get_enet_if(i)) {
+			case PHY_INTERFACE_MODE_QSGMII:
+				qsgmii_configure_repeater(i);
+				break;
+			case PHY_INTERFACE_MODE_SGMII:
+				sgmii_configure_repeater(i);
+				break;
+			default:
+				break;
+			}
+
+			if (i == 16)
+				i = NUM_WRIOP_PORTS;
+		}
+	}
+#endif
+	error = pci_eth_init(bis);
+	return error;
+}
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index a022da9..96d9ae7 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -50,14 +50,20 @@ int checkboard(void)
 					    "100 separate SSCG"};
 	int clock;
 
-
+#ifdef CONFIG_TARGET_LS1088AQDS
+	printf("Board: LS1088A-QDS, ");
+#else
 	printf("Board: LS1088A-RDB, ");
+#endif
 
 	sw = QIXIS_READ(arch);
 	printf("Board Arch: V%d, ", sw >> 4);
 
+#ifdef CONFIG_TARGET_LS1088AQDS
+	printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+#else
 	printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
-
+#endif
 
 	memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
 
@@ -68,8 +74,27 @@ int checkboard(void)
 	puts("SD card\n");
 #endif
 	switch (sw) {
+#ifdef CONFIG_TARGET_LS1088AQDS
 	case 0:
-
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+	case 7:
+		printf("vBank: %d\n", sw);
+		break;
+	case 8:
+		puts("PromJet\n");
+		break;
+	case 15:
+		puts("IFCCard\n");
+		break;
+	case 14:
+#else
+	case 0:
+#endif
 		puts("QSPI:");
 		sw = QIXIS_READ(brdcfg[0]);
 		sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT;
@@ -86,9 +111,15 @@ int checkboard(void)
 		break;
 	}
 
-
+#ifdef CONFIG_TARGET_LS1088AQDS
+	printf("FPGA: v%d (%s), build %d",
+	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
+	       (int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+#else
 	printf("CPLD: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
-
+#endif
 
 	/*
 	 * Display the actual SERDES reference clocks as configured by the
@@ -116,8 +147,13 @@ int checkboard(void)
 
 bool if_board_diff_clk(void)
 {
+#ifdef CONFIG_TARGET_LS1088AQDS
+	u8 diff_conf = QIXIS_READ(brdcfg[11]);
+	return diff_conf & 0x40;
+#else
 	u8 diff_conf = QIXIS_READ(dutcfg[11]);
 	return diff_conf & 0x80;
+#endif
 }
 
 unsigned long get_board_sys_clk(void)
@@ -217,7 +253,45 @@ void board_retimer_init(void)
 	reg |= 0x70;
 	i2c_write(I2C_RETIMER_ADDR, 0x2F, 1, &reg, 1);
 
+#ifdef	CONFIG_TARGET_LS1088AQDS
+	/* Retimer is connected to I2C1_CH5 */
+	select_i2c_ch_pca9547(I2C_MUX_CH5);
+
+	/* Access to Control/Shared register */
+	reg = 0x0;
+	i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, &reg, 1);
 
+	/* Read device revision and ID */
+	i2c_read(I2C_RETIMER_ADDR2, 1, 1, &reg, 1);
+	debug("Retimer version id = 0x%x\n", reg);
+
+	/* Enable Broadcast. All writes target all channel register sets */
+	reg = 0x0c;
+	i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, &reg, 1);
+
+	/* Reset Channel Registers */
+	i2c_read(I2C_RETIMER_ADDR2, 0, 1, &reg, 1);
+	reg |= 0x4;
+	i2c_write(I2C_RETIMER_ADDR2, 0, 1, &reg, 1);
+
+	/* Set data rate as 10.3125 Gbps */
+	reg = 0x90;
+	i2c_write(I2C_RETIMER_ADDR2, 0x60, 1, &reg, 1);
+	reg = 0xb3;
+	i2c_write(I2C_RETIMER_ADDR2, 0x61, 1, &reg, 1);
+	reg = 0x90;
+	i2c_write(I2C_RETIMER_ADDR2, 0x62, 1, &reg, 1);
+	reg = 0xb3;
+	i2c_write(I2C_RETIMER_ADDR2, 0x63, 1, &reg, 1);
+	reg = 0xcd;
+	i2c_write(I2C_RETIMER_ADDR2, 0x64, 1, &reg, 1);
+
+	/* Select VCO Divider to full rate (000) */
+	i2c_read(I2C_RETIMER_ADDR2, 0x2F, 1, &reg, 1);
+	reg &= 0x0f;
+	reg |= 0x70;
+	i2c_write(I2C_RETIMER_ADDR2, 0x2F, 1, &reg, 1);
+#endif
 	/*return the default channel*/
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 }
diff --git a/board/freescale/ls1088a/ls1088a_qixis.h b/board/freescale/ls1088a/ls1088a_qixis.h
index 9757d1b..4790461 100644
--- a/board/freescale/ls1088a/ls1088a_qixis.h
+++ b/board/freescale/ls1088a/ls1088a_qixis.h
@@ -31,4 +31,9 @@
 #define QIXIS_SDCLK1_165		0x2
 #define QIXIS_SDCLK1_100_SP		0x3
 
+#define BRDCFG4_EMISEL_MASK		0xE0
+#define BRDCFG4_EMISEL_SHIFT		5
+#define BRDCFG9_SFPTX_MASK		0x10
+#define BRDCFG9_SFPTX_SHIFT		4
+
 #endif