Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD

In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>

11 files changed, 23 insertions, 23 deletions

diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index c661c77..81c2aad 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -212,7 +212,7 @@ int board_init(void)
 	at91sam9x5ek_nand_hw_init();
 #endif
 
-#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI)
+#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD)
 	at91_uhp_hw_init();
 #endif
 #ifdef CONFIG_LCD
diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c
index 7b58fcd..757af9f 100644
--- a/board/compulab/cm_t54/cm_t54.c
+++ b/board/compulab/cm_t54/cm_t54.c
@@ -181,7 +181,7 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
diff --git a/board/gumstix/duovero/duovero.c b/board/gumstix/duovero/duovero.c
index 11d2d7f..09b0c53 100644
--- a/board/gumstix/duovero/duovero.c
+++ b/board/gumstix/duovero/duovero.c
@@ -24,7 +24,7 @@
 static void setup_net_chip(void);
 #endif
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/arch/ehci.h>
 #include <asm/ehci-omap.h>
@@ -206,7 +206,7 @@ int board_eth_init(bd_t *bis)
 	return rc;
 }
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 12358f1..1deb2bd 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -19,7 +19,7 @@
 #include <asm/arch/clock.h>
 #include <errno.h>
 #include <i2c.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/ehci-omap.h>
 #endif
@@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Address of the framebuffer in RAM. */
 #define FB_START_ADDRESS 0x88000000
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 5e44726..fd441d4 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -27,7 +27,7 @@
 #include <asm/mach-types.h>
 #include "overo.h"
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/ehci-omap.h>
 #endif
@@ -393,7 +393,7 @@ void board_mmc_power_init(void)
 }
 #endif
 
-#if defined(CONFIG_USB_EHCI)
+#if defined(CONFIG_USB_EHCI_HCD)
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -420,4 +420,4 @@ int ehci_hcd_stop(void)
 	return omap_ehci_hcd_stop();
 }
 
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
diff --git a/board/technexion/tao3530/tao3530.c b/board/technexion/tao3530/tao3530.c
index cba48d4..4b61973 100644
--- a/board/technexion/tao3530/tao3530.c
+++ b/board/technexion/tao3530/tao3530.c
@@ -195,7 +195,7 @@ void board_mmc_power_init(void)
 }
 #endif
 
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
 /* Call usb_stop() before starting the kernel */
 void show_boot_progress(int val)
 {
@@ -219,4 +219,4 @@ int ehci_hcd_stop(int index)
 {
 	return omap_ehci_hcd_stop();
 }
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index ad4b02a..25aeebc 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -19,7 +19,7 @@
 #include <spl.h>
 #include <mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/ehci-omap.h>
 #endif
@@ -46,7 +46,7 @@ static const u32 gpmc_XR16L2751[] = {
 	XR16L2751_GPMC_CONFIG6,
 };
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 6b05541..6e73ae1 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -23,7 +23,7 @@
 #include <i2c.h>
 #include <spartan3.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/ehci-omap.h>
 #endif
@@ -95,7 +95,7 @@ static const u32 gpmc_fpga[] = {
 	FPGA_GPMC_CONFIG6,
 };
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index e90fe1a..c1365e2 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -36,7 +36,7 @@
 #include "beagle.h"
 #include <command.h>
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/ehci-omap.h>
 #endif
@@ -538,7 +538,7 @@ void board_mmc_power_init(void)
 }
 #endif
 
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
 /* Call usb_stop() before starting the kernel */
 void show_boot_progress(int val)
 {
@@ -563,7 +563,7 @@ int ehci_hcd_stop(int index)
 	return omap_ehci_hcd_stop();
 }
 
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
 
 #if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
 int board_eth_init(bd_t *bis)
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 64d772c..7eaffe3 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -20,7 +20,7 @@
 
 #include "mux_data.h"
 
-#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
 #include <sata.h>
 #include <usb.h>
 #include <asm/gpio.h>
@@ -151,7 +151,7 @@ int board_eth_init(bd_t *bis)
 	return 0;
 }
 
-#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
 static void enable_host_clocks(void)
 {
 	int auxclk;
@@ -220,7 +220,7 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 187ff3c..5822366 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -15,7 +15,7 @@
 
 #include "panda_mux_data.h"
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/arch/ehci.h>
 #include <asm/ehci-omap.h>
@@ -301,7 +301,7 @@ void board_mmc_power_init(void)
 #endif
 #endif
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,