Merge git://git.denx.de/u-boot-fsl-qoriq

17 files changed, 1607 insertions, 11 deletions

diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 25d22d2..9afd1c4 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -71,7 +71,9 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
+
 	/*
 	 * Set CCI-400 control override register to enable barrier
 	 * transaction
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 97ab340..406194d 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -106,8 +106,8 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)
-				   CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+				   CONFIG_SYS_CCI400_OFFSET);
 
 	/* Set CCI-400 control override register to enable barrier
 	 * transaction */
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index a21e4c4..c6c1c71 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -104,7 +104,8 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
 	/*
 	 * Set CCI-400 control override register to enable barrier
 	 * transaction
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index d81d8ab..8b3f4ad 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -204,7 +204,8 @@ int board_early_init_f(void)
 #ifdef CONFIG_SPL_BUILD
 void board_init_f(ulong dummy)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
 	unsigned int major;
 
 #ifdef CONFIG_NAND_BOOT
@@ -425,7 +426,8 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
 	unsigned int major;
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A010315
@@ -460,7 +462,8 @@ int board_init(void)
 #if defined(CONFIG_DEEP_SLEEP)
 void board_sleep_prepare(void)
 {
-	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
 	unsigned int major;
 
 	major = get_soc_major_rev();
diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig
new file mode 100644
index 0000000..1ada661
--- /dev/null
+++ b/board/freescale/ls1088a/Kconfig
@@ -0,0 +1,31 @@
+if TARGET_LS1088AQDS
+
+config SYS_BOARD
+	default "ls1088a"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1088aqds"
+
+endif
+
+if TARGET_LS1088ARDB
+
+config SYS_BOARD
+	default "ls1088a"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1088ardb"
+
+endif
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
new file mode 100644
index 0000000..e1e6d4b
--- /dev/null
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -0,0 +1,15 @@
+LS1088ARDB BOARD
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+M:	Ashish Kumar <Ashish.Kumar@nxp.com>
+S:	Maintained
+F:	board/freescale/ls1088a/
+F:	include/configs/ls1088ardb.h
+F:	configs/ls1088ardb_qspi_defconfig
+
+LS1088AQDS BOARD
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+M:	Ashish Kumar <Ashish.Kumar@nxp.com>
+S:	Maintained
+F:	board/freescale/ls1088a/
+F:	include/configs/ls1088aqds.h
+F:	configs/ls1088aqds_qspi_defconfig
diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile
new file mode 100644
index 0000000..bdcce9e
--- /dev/null
+++ b/board/freescale/ls1088a/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright 2017 NXP
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += ls1088a.o
+obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o
+obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o
+obj-y += ddr.o
diff --git a/board/freescale/ls1088a/README b/board/freescale/ls1088a/README
new file mode 100644
index 0000000..aa0fb6a
--- /dev/null
+++ b/board/freescale/ls1088a/README
@@ -0,0 +1,145 @@
+Overview
+--------
+The LS1088A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports ARM SoC LS1088A and its
+derivatives.
+
+
+LS1088A SoC Overview
+--------------------------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+
+RDB Default Switch Settings (1: ON; 0: OFF)
+-------------------------------------------
+
+For QSPI Boot
+SW1 0011 0001
+SW2 x100 0000
+SW3 1111 0010
+SW4 1001 0011
+SW5 1111 0000
+
+For SD Boot
+SW1 0010 0000
+SW2 0100 0000
+SW3 1111 0010
+SW4 1001 0011
+SW5 1111 0000
+
+For eMMC Boot
+SW1 0010 0000
+SW2 1100 0000
+SW3 1111 0010
+SW4 1001 0011
+SW5 1111 0000
+
+Alternately you can use this command to switch from QSPI to SD
+
+=> i2c mw 66 0x60 0x20; i2c mw 66 10 10;i2c mw 66 10 21
+
+ LS1088ARDB board Overview
+ -------------------------
+ - SERDES Connections, 16 lanes supporting:
+      - PCI Express - 3.0
+      - SATA 3.0
+      - XFI
+      - QSGMII
+ - DDR Controller
+     - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
+       chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
+       with FSL refernce software is 2100MT/s
+ - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
+ - IFC/Local Bus
+    - One 2 GB NAND flash with ECC support, not as boot source
+    - CPLD of size 2K
+ - USB 3.0
+    - Two high speed USB 3.0 ports
+    - First USB 3.0 port configured as Host with Type-A connector
+    - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC/eMMC
+    - SDHC slot and onboard eMMC are muxed together
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - 2 UART
+ - JTAG support
+ - QSPI emulator support
+ - TDM riser support
+
+QDS Default Switch Settings (1: ON; 0: OFF)
+-------------------------------------------
+
+For 16b IFC-NOR
+SW1 0001 0010
+SW2 x110 1111
+
+For QSPI Boot
+SW1 0011 0001
+SW2 0110 1111
+
+For SD Boot
+SW1 0010 0000
+SW2 0110 1111
+
+For eMMC Boot
+SW1 0010 0000
+SW2 1110 1111
+
+For I2C (ext. addr.)
+SW1 0010 0100
+SW2 1110 1111
+
+SW3 to SW12 are identical for all boot source
+
+SW3 0010 0100
+SW4 0010 0000
+SW5 1110 0111
+SW6 1110 1000
+SW7 0001 1101
+SW8 0000 1101
+SW9 1100 1010
+SW10 1110 1000
+SW11 1111 0100
+SW12 1111 1111
+
+ LS1088AQDS board Overview
+ -------------------------
+ - SERDES Connections, 16 lanes supporting:
+      - PCI Express - 3.0
+      - SATA 3.0
+      - 2 XFI
+      - QSGMII, SGMII with help for Riser card
+      - 2 RGMII
+      - 5 slot for Riser card or PCIe NIC
+ - DDR Controller
+     - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
+       chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
+       with FSL refernce software is 2100MT/s
+ - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
+ - IFC/Local Bus
+    - One 2 GB NAND flash with ECC support, not as boot source
+    - CPLD of size 2K
+ - USB 3.0
+    - Two high speed USB 3.0 ports
+    - First USB 3.0 port configured as Host with Type-A connector
+    - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC/eMMC
+    - SDHC/eMMC slot via adaptor
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - 2 UART
+ - JTAG support
+ - DSPI
+ - PROMJET support
+ - QSPI emulator support
+ - TDM riser support
+
+QSPI flash memory map valid for both QDS and RDB
+  Image                               Flash Offset
+ RCW+PBI                             0x00000000
+ Boot firmware (U-Boot)              0x00100000
+ Boot firmware Environment           0x00300000
+ PPA firmware                        0x00400000
+ DPAA2 MC                            0x00A00000
+ DPAA2 DPL                           0x00D00000
+ DPAA2 DPC                           0x00E00000
+ Kernel.itb                          0x01000000
diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c
new file mode 100644
index 0000000..0ecfd65
--- /dev/null
+++ b/board/freescale/ls1088a/ddr.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/clock.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+			   dimm_params_t *pdimm,
+			   unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 1) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	/*
+	 * we use identical timing for all slots. If needed, change the code
+	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+	 */
+	pbsp = udimms[0];
+
+	/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found for %lu MT/s\n",
+		       ddr_freq);
+		printf("Trying to use the highest speed (%u) parameters\n",
+		       pbsp_highest->datarate_mhz_high);
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
+		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+		pbsp->wrlvl_ctl_3);
+
+
+
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* Enable DDR hashing */
+	popts->addr_hash = 1;
+
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+			  DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2;
+}
+
+
+int fsl_initdram(void)
+{
+	puts("Initializing DDR....using SPD\n");
+
+	gd->ram_size = fsl_ddr_sdram();
+
+	return 0;
+}
diff --git a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h
new file mode 100644
index 0000000..a1ad709
--- /dev/null
+++ b/board/freescale/ls1088a/ddr.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1088A_DDR_H__
+#define __LS1088A_DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
+	 */
+#if defined(CONFIG_TARGET_LS1088ARDB)
+
+	{2,  1666, 0, 8,     8, 0x090A0B0E, 0x0F10110D,},
+	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2300, 0, 8,     9, 0x0A0C0E11, 0x1214160F,},
+	{}
+#elif defined(CONFIG_TARGET_LS1088AQDS)
+	{2,  1666, 0, 8,     8, 0x0A0A0C0E, 0x0F10110C,},
+	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2300, 0, 4,     9, 0x0A0C0D11, 0x1214150E,},
+	{}
+
+#endif
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+#endif
diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c
new file mode 100644
index 0000000..c19f59a
--- /dev/null
+++ b/board/freescale/ls1088a/eth_ls1088aqds.c
@@ -0,0 +1,683 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+#include <hwconfig.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+#include "../common/qixis.h"
+
+#include "ls1088a_qixis.h"
+
+#define MC_BOOT_ENV_VAR "mcinitcmd"
+
+#ifdef CONFIG_FSL_MC_ENET
+
+#define SFP_TX		0
+
+ /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
+ *   Bank 1 -> Lanes A, B, C, D,
+ *   Bank 2 -> Lanes A,B, C, D,
+ */
+
+ /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
+  * means that the mapping must be determined dynamically, or that the lane
+  * maps to something other than a board slot.
+  */
+
+static u8 lane_to_slot_fsm1[] = {
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
+ * housed.
+ */
+
+static int xqsgii_riser_phy_addr[] = {
+	XQSGMII_CARD_PHY1_PORT0_ADDR,
+	XQSGMII_CARD_PHY2_PORT0_ADDR,
+	XQSGMII_CARD_PHY3_PORT0_ADDR,
+	XQSGMII_CARD_PHY4_PORT0_ADDR,
+	XQSGMII_CARD_PHY3_PORT2_ADDR,
+	XQSGMII_CARD_PHY1_PORT2_ADDR,
+	XQSGMII_CARD_PHY4_PORT2_ADDR,
+	XQSGMII_CARD_PHY2_PORT2_ADDR,
+};
+
+static int sgmii_riser_phy_addr[] = {
+	SGMII_CARD_PORT1_PHY_ADDR,
+	SGMII_CARD_PORT2_PHY_ADDR,
+	SGMII_CARD_PORT3_PHY_ADDR,
+	SGMII_CARD_PORT4_PHY_ADDR,
+};
+
+/* Slot2 does not have EMI connections */
+#define EMI_NONE	0xFF
+#define EMI1_RGMII1	0
+#define EMI1_RGMII2	1
+#define EMI1_SLOT1	2
+
+static const char * const mdio_names[] = {
+	"LS1088A_QDS_MDIO0",
+	"LS1088A_QDS_MDIO1",
+	"LS1088A_QDS_MDIO2",
+	DEFAULT_WRIOP_MDIO2_NAME,
+};
+
+struct ls1088a_qds_mdio {
+	u8 muxval;
+	struct mii_dev *realbus;
+};
+
+static void sgmii_configure_repeater(int dpmac)
+{
+	struct mii_dev *bus;
+	uint8_t a = 0xf;
+	int i, j, ret;
+	unsigned short value;
+	const char *dev = "LS1088A_QDS_MDIO2";
+	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
+	int i2c_phy_addr = 0;
+	int phy_addr = 0;
+
+	uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+
+	/* Set I2c to Slot 1 */
+	i2c_write(0x77, 0, 0, &a, 1);
+
+	switch (dpmac) {
+	case 1:
+		i2c_phy_addr = i2c_addr[1];
+		phy_addr = 4;
+		break;
+	case 2:
+		i2c_phy_addr = i2c_addr[0];
+		phy_addr = 0;
+		break;
+	case 3:
+		i2c_phy_addr = i2c_addr[3];
+		phy_addr = 0xc;
+		break;
+	case 7:
+		i2c_phy_addr = i2c_addr[2];
+		phy_addr = 8;
+		break;
+	}
+
+	/* Check the PHY status */
+	ret = miiphy_set_current_dev(dev);
+	if (ret > 0)
+		goto error;
+
+	bus = mdio_get_current_dev();
+	debug("Reading from bus %s\n", bus->name);
+
+	ret = miiphy_write(dev, phy_addr, 0x1f, 3);
+	if (ret > 0)
+		goto error;
+
+	mdelay(10);
+	ret = miiphy_read(dev, phy_addr, 0x11, &value);
+	if (ret > 0)
+			goto error;
+
+	mdelay(10);
+
+	if ((value & 0xfff) == 0x401) {
+		miiphy_write(dev, phy_addr, 0x1f, 0);
+		printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		for (j = 0; j < 4; j++) {
+			a = 0x18;
+			i2c_write(i2c_phy_addr, 6, 1, &a, 1);
+			a = 0x38;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			a = 0x4;
+			i2c_write(i2c_phy_addr, 8, 1, &a, 1);
+
+			i2c_write(i2c_phy_addr, 0xf, 1,
+				  &ch_a_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x11, 1,
+				  &ch_a_ctl2[j], 1);
+
+			i2c_write(i2c_phy_addr, 0x16, 1,
+				  &ch_b_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x18, 1,
+				  &ch_b_ctl2[j], 1);
+
+			a = 0x14;
+			i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
+			a = 0xb5;
+			i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
+			a = 0x20;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			mdelay(100);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+
+			mdelay(100);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+
+			if ((value & 0xfff) == 0x401) {
+				printf("DPMAC %d :PHY is configured ",
+				       dpmac);
+				printf("after setting repeater 0x%x\n",
+				       value);
+				i = 5;
+				j = 5;
+			} else {
+				printf("DPMAC %d :PHY is failed to ",
+				       dpmac);
+				printf("configure the repeater 0x%x\n", value);
+			}
+		}
+	}
+	miiphy_write(dev, phy_addr, 0x1f, 0);
+error:
+	if (ret)
+		printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
+	return;
+}
+
+static void qsgmii_configure_repeater(int dpmac)
+{
+	uint8_t a = 0xf;
+	int i, j;
+	int i2c_phy_addr = 0;
+	int phy_addr = 0;
+	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
+
+	uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
+	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+
+	const char *dev = mdio_names[EMI1_SLOT1];
+	int ret = 0;
+	unsigned short value;
+
+	/* Set I2c to Slot 1 */
+	i2c_write(0x77, 0, 0, &a, 1);
+
+	switch (dpmac) {
+	case 7:
+	case 8:
+	case 9:
+	case 10:
+		i2c_phy_addr = i2c_addr[2];
+		phy_addr = 8;
+		break;
+
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		i2c_phy_addr = i2c_addr[3];
+		phy_addr = 0xc;
+		break;
+	}
+
+	/* Check the PHY status */
+	ret = miiphy_set_current_dev(dev);
+	ret = miiphy_write(dev, phy_addr, 0x1f, 3);
+	mdelay(10);
+	ret = miiphy_read(dev, phy_addr, 0x11, &value);
+	mdelay(10);
+	ret = miiphy_read(dev, phy_addr, 0x11, &value);
+	mdelay(10);
+	if ((value & 0xf) == 0xf) {
+		miiphy_write(dev, phy_addr, 0x1f, 0);
+		printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		for (j = 0; j < 4; j++) {
+			a = 0x18;
+			i2c_write(i2c_phy_addr, 6, 1, &a, 1);
+			a = 0x38;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			a = 0x4;
+			i2c_write(i2c_phy_addr, 8, 1, &a, 1);
+
+			i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
+
+			i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
+			i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
+
+			a = 0x14;
+			i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
+			a = 0xb5;
+			i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
+			a = 0x20;
+			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			mdelay(100);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+			mdelay(1);
+			ret = miiphy_read(dev, phy_addr, 0x11, &value);
+			if (ret > 0)
+				goto error;
+			mdelay(10);
+			if ((value & 0xf) == 0xf) {
+				miiphy_write(dev, phy_addr, 0x1f, 0);
+				printf("DPMAC %d :PHY is ..... Configured\n",
+				       dpmac);
+				return;
+			}
+		}
+	}
+error:
+	printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
+	return;
+}
+
+static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
+{
+	return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+	struct mii_dev *bus;
+	const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
+
+	if (!name) {
+		printf("No bus for muxval %x\n", muxval);
+		return NULL;
+	}
+
+	bus = miiphy_get_dev_by_name(name);
+
+	if (!bus) {
+		printf("No bus by name %s\n", name);
+		return NULL;
+	}
+
+	return bus;
+}
+
+static void ls1088a_qds_enable_SFP_TX(u8 muxval)
+{
+	u8 brdcfg9;
+
+	brdcfg9 = QIXIS_READ(brdcfg[9]);
+	brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
+	brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
+	QIXIS_WRITE(brdcfg[9], brdcfg9);
+}
+
+static void ls1088a_qds_mux_mdio(u8 muxval)
+{
+	u8 brdcfg4;
+
+	if (muxval <= 5) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+	}
+}
+
+static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
+				 int devad, int regnum)
+{
+	struct ls1088a_qds_mdio *priv = bus->priv;
+
+	ls1088a_qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+				  int regnum, u16 value)
+{
+	struct ls1088a_qds_mdio *priv = bus->priv;
+
+	ls1088a_qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
+{
+	struct ls1088a_qds_mdio *priv = bus->priv;
+
+	return priv->realbus->reset(priv->realbus);
+}
+
+static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
+{
+	struct ls1088a_qds_mdio *pmdio;
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate ls1088a_qds MDIO bus\n");
+		return -1;
+	}
+
+	pmdio = malloc(sizeof(*pmdio));
+	if (!pmdio) {
+		printf("Failed to allocate ls1088a_qds private data\n");
+		free(bus);
+		return -1;
+	}
+
+	bus->read = ls1088a_qds_mdio_read;
+	bus->write = ls1088a_qds_mdio_write;
+	bus->reset = ls1088a_qds_mdio_reset;
+	sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
+
+	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+	if (!pmdio->realbus) {
+		printf("No bus with name %s\n", realbusname);
+		free(bus);
+		free(pmdio);
+		return -1;
+	}
+
+	pmdio->muxval = muxval;
+	bus->priv = pmdio;
+
+	return mdio_register(bus);
+}
+
+/*
+ * Initialize the dpmac_info array.
+ *
+ */
+static void initialize_dpmac_to_slot(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	switch (serdes1_prtcl) {
+	case 0x12:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
+		break;
+	case 0x15:
+	case 0x1D:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[2] = EMI_NONE;
+		lane_to_slot_fsm1[3] = EMI_NONE;
+		break;
+	case 0x1E:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[3] = EMI_NONE;
+		break;
+	case 0x3A:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[1] = EMI_NONE;
+		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
+		lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
+		break;
+
+	default:
+		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
+		       __func__, serdes1_prtcl);
+		break;
+	}
+}
+
+void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
+{
+	struct mii_dev *bus;
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	int *riser_phy_addr;
+	char *env_hwconfig = env_get("hwconfig");
+
+	if (hwconfig_f("xqsgmii", env_hwconfig))
+		riser_phy_addr = &xqsgii_riser_phy_addr[0];
+	else
+		riser_phy_addr = &sgmii_riser_phy_addr[0];
+
+	switch (serdes1_prtcl) {
+	case 0x12:
+	case 0x15:
+	case 0x1E:
+	case 0x3A:
+		switch (dpmac_id) {
+		case 1:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[1]);
+			break;
+		case 2:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[0]);
+			break;
+		case 3:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[3]);
+			break;
+		case 7:
+			wriop_set_phy_address(dpmac_id, riser_phy_addr[2]);
+			break;
+		default:
+			printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
+			break;
+		}
+		break;
+	default:
+		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
+		       __func__, serdes1_prtcl);
+		return;
+	}
+	dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
+	bus = mii_dev_for_muxval(EMI1_SLOT1);
+	wriop_set_mdio(dpmac_id, bus);
+}
+
+void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
+{
+	struct mii_dev *bus;
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	switch (serdes1_prtcl) {
+	case 0x1D:
+	case 0x1E:
+		switch (dpmac_id) {
+		case 3:
+		case 4:
+		case 5:
+		case 6:
+			wriop_set_phy_address(dpmac_id, dpmac_id + 9);
+			break;
+		case 7:
+		case 8:
+		case 9:
+		case 10:
+			wriop_set_phy_address(dpmac_id, dpmac_id + 1);
+			break;
+		}
+
+		dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
+		bus = mii_dev_for_muxval(EMI1_SLOT1);
+		wriop_set_mdio(dpmac_id, bus);
+		break;
+	default:
+		printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		break;
+	}
+}
+
+void ls1088a_handle_phy_interface_xsgmii(int i)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	switch (serdes1_prtcl) {
+	case 0x15:
+	case 0x1D:
+	case 0x1E:
+		wriop_set_phy_address(i, i + 26);
+		ls1088a_qds_enable_SFP_TX(SFP_TX);
+		break;
+	default:
+		printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		break;
+	}
+}
+
+static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 serdes1_prtcl, cfg;
+	struct mii_dev *bus;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
+
+	switch (dpmac_id) {
+	case 4:
+		wriop_set_phy_address(dpmac_id, RGMII_PHY1_ADDR);
+		dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
+		bus = mii_dev_for_muxval(EMI1_RGMII1);
+		wriop_set_mdio(dpmac_id, bus);
+		break;
+	case 5:
+		wriop_set_phy_address(dpmac_id, RGMII_PHY2_ADDR);
+		dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
+		bus = mii_dev_for_muxval(EMI1_RGMII2);
+		wriop_set_mdio(dpmac_id, bus);
+		break;
+	default:
+		printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		break;
+	}
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int error = 0, i;
+	char *mc_boot_env_var;
+#ifdef CONFIG_FSL_MC_ENET
+	struct memac_mdio_info *memac_mdio0_info;
+	char *env_hwconfig = env_get("hwconfig");
+
+	initialize_dpmac_to_slot();
+
+	memac_mdio0_info = (struct memac_mdio_info *)malloc(
+					sizeof(struct memac_mdio_info));
+	memac_mdio0_info->regs =
+		(struct memac_mdio_controller *)
+					CONFIG_SYS_FSL_WRIOP1_MDIO1;
+	memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
+
+	/* Register the real MDIO1 bus */
+	fm_memac_mdio_init(bis, memac_mdio0_info);
+	/* Register the muxing front-ends to the MDIO buses */
+	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
+	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
+	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
+
+	for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
+		switch (wriop_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_RGMII:
+			ls1088a_handle_phy_interface_rgmii(i);
+			break;
+		case PHY_INTERFACE_MODE_QSGMII:
+			ls1088a_handle_phy_interface_qsgmii(i);
+			break;
+		case PHY_INTERFACE_MODE_SGMII:
+			ls1088a_handle_phy_interface_sgmii(i);
+			break;
+		case PHY_INTERFACE_MODE_XGMII:
+			ls1088a_handle_phy_interface_xsgmii(i);
+			break;
+		default:
+			break;
+
+		if (i == 16)
+			i = NUM_WRIOP_PORTS;
+		}
+	}
+
+	mc_boot_env_var = env_get(MC_BOOT_ENV_VAR);
+	if (mc_boot_env_var)
+		run_command_list(mc_boot_env_var, -1, 0);
+	error = cpu_eth_init(bis);
+
+	if (hwconfig_f("xqsgmii", env_hwconfig)) {
+		for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
+			switch (wriop_get_enet_if(i)) {
+			case PHY_INTERFACE_MODE_QSGMII:
+				qsgmii_configure_repeater(i);
+				break;
+			case PHY_INTERFACE_MODE_SGMII:
+				sgmii_configure_repeater(i);
+				break;
+			default:
+				break;
+			}
+
+			if (i == 16)
+				i = NUM_WRIOP_PORTS;
+		}
+	}
+#endif
+	error = pci_eth_init(bis);
+	return error;
+}
diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c b/board/freescale/ls1088a/eth_ls1088ardb.c
new file mode 100644
index 0000000..853d815
--- /dev/null
+++ b/board/freescale/ls1088a/eth_ls1088ardb.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <exports.h>
+#include <asm/arch/fsl_serdes.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MC_BOOT_ENV_VAR "mcinitcmd"
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+	char *mc_boot_env_var;
+	int i, interface;
+	struct memac_mdio_info mdio_info;
+	struct mii_dev *dev;
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct memac_mdio_controller *reg;
+	u32 srds_s1, cfg;
+
+	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+
+	srds_s1 = serdes_get_number(FSL_SRDS_1, cfg);
+
+	reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
+	mdio_info.regs = reg;
+	mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
+
+	/* Register the EMI 1 */
+	fm_memac_mdio_init(bis, &mdio_info);
+
+	reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
+	mdio_info.regs = reg;
+	mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
+
+	/* Register the EMI 2 */
+	fm_memac_mdio_init(bis, &mdio_info);
+
+	switch (srds_s1) {
+	case 0x1D:
+		/*
+		 * XFI does not need a PHY to work, but to avoid U-boot use
+		 * default PHY address which is zero to a MAC when it found
+		 * a MAC has no PHY address, we give a PHY address to XFI
+		 * MAC error.
+		 */
+		wriop_set_phy_address(WRIOP1_DPMAC1, 0x0a);
+		wriop_set_phy_address(WRIOP1_DPMAC2, AQ_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC3, QSGMII1_PORT1_PHY_ADDR);
+		wriop_set_phy_address(WRIOP1_DPMAC4, QSGMII1_PORT2_PHY_ADDR);
+		wriop_set_phy_address(WRIOP1_DPMAC5, QSGMII1_PORT3_PHY_ADDR);
+		wriop_set_phy_address(WRIOP1_DPMAC6, QSGMII1_PORT4_PHY_ADDR);
+		wriop_set_phy_address(WRIOP1_DPMAC7, QSGMII2_PORT1_PHY_ADDR);
+		wriop_set_phy_address(WRIOP1_DPMAC8, QSGMII2_PORT2_PHY_ADDR);
+		wriop_set_phy_address(WRIOP1_DPMAC9, QSGMII2_PORT3_PHY_ADDR);
+		wriop_set_phy_address(WRIOP1_DPMAC10, QSGMII2_PORT4_PHY_ADDR);
+
+		break;
+	default:
+		printf("SerDes1 protocol 0x%x is not supported on LS1088ARDB\n",
+		       srds_s1);
+		break;
+	}
+
+	for (i = WRIOP1_DPMAC3; i <= WRIOP1_DPMAC10; i++) {
+		interface = wriop_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_QSGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+			wriop_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+	dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+	wriop_set_mdio(WRIOP1_DPMAC2, dev);
+
+	mc_boot_env_var = env_get(MC_BOOT_ENV_VAR);
+	if (mc_boot_env_var)
+		run_command_list(mc_boot_env_var, -1, 0);
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
new file mode 100644
index 0000000..96d9ae7
--- /dev/null
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <fsl_ifc.h>
+#include <fsl_ddr.h>
+#include <fsl_sec.h>
+#include <asm/io.h>
+#include <fdt_support.h>
+#include <libfdt.h>
+#include <fsl-mc/fsl_mc.h>
+#include <environment.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#include <asm/arch/ppa.h>
+
+#include "../common/qixis.h"
+#include "ls1088a_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned long long get_qixis_addr(void)
+{
+	unsigned long long addr;
+
+	if (gd->flags & GD_FLG_RELOC)
+		addr = QIXIS_BASE_PHYS;
+	else
+		addr = QIXIS_BASE_PHYS_EARLY;
+
+	/*
+	 * IFC address under 256MB is mapped to 0x30000000, any address above
+	 * is mapped to 0x5_10000000 up to 4GB.
+	 */
+	addr = addr  > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
+
+	return addr;
+}
+
+int checkboard(void)
+{
+	char buf[64];
+	u8 sw;
+	static const char *const freq[] = {"100", "125", "156.25",
+					    "100 separate SSCG"};
+	int clock;
+
+#ifdef CONFIG_TARGET_LS1088AQDS
+	printf("Board: LS1088A-QDS, ");
+#else
+	printf("Board: LS1088A-RDB, ");
+#endif
+
+	sw = QIXIS_READ(arch);
+	printf("Board Arch: V%d, ", sw >> 4);
+
+#ifdef CONFIG_TARGET_LS1088AQDS
+	printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+#else
+	printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
+#endif
+
+	memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+#ifdef CONFIG_SD_BOOT
+	puts("SD card\n");
+#endif
+	switch (sw) {
+#ifdef CONFIG_TARGET_LS1088AQDS
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+	case 7:
+		printf("vBank: %d\n", sw);
+		break;
+	case 8:
+		puts("PromJet\n");
+		break;
+	case 15:
+		puts("IFCCard\n");
+		break;
+	case 14:
+#else
+	case 0:
+#endif
+		puts("QSPI:");
+		sw = QIXIS_READ(brdcfg[0]);
+		sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT;
+		if (sw == 0 || sw == 4)
+			puts("0\n");
+		else if (sw == 1)
+			puts("1\n");
+		else
+			puts("EMU\n");
+		break;
+
+	default:
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+		break;
+	}
+
+#ifdef CONFIG_TARGET_LS1088AQDS
+	printf("FPGA: v%d (%s), build %d",
+	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
+	       (int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+#else
+	printf("CPLD: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
+#endif
+
+	/*
+	 * Display the actual SERDES reference clocks as configured by the
+	 * dip switches on the board.  Note that the SWx registers could
+	 * technically be set to force the reference clocks to match the
+	 * values that the SERDES expects (or vice versa).  For now, however,
+	 * we just display both values and hope the user notices when they
+	 * don't match.
+	 */
+	puts("SERDES1 Reference : ");
+	sw = QIXIS_READ(brdcfg[2]);
+	clock = (sw >> 6) & 3;
+	printf("Clock1 = %sMHz ", freq[clock]);
+	clock = (sw >> 4) & 3;
+	printf("Clock2 = %sMHz", freq[clock]);
+
+	puts("\nSERDES2 Reference : ");
+	clock = (sw >> 2) & 3;
+	printf("Clock1 = %sMHz ", freq[clock]);
+	clock = (sw >> 0) & 3;
+	printf("Clock2 = %sMHz\n", freq[clock]);
+
+	return 0;
+}
+
+bool if_board_diff_clk(void)
+{
+#ifdef CONFIG_TARGET_LS1088AQDS
+	u8 diff_conf = QIXIS_READ(brdcfg[11]);
+	return diff_conf & 0x40;
+#else
+	u8 diff_conf = QIXIS_READ(dutcfg[11]);
+	return diff_conf & 0x80;
+#endif
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch (sysclk_conf & 0x0f) {
+	case QIXIS_SYSCLK_83:
+		return 83333333;
+	case QIXIS_SYSCLK_100:
+		return 100000000;
+	case QIXIS_SYSCLK_125:
+		return 125000000;
+	case QIXIS_SYSCLK_133:
+		return 133333333;
+	case QIXIS_SYSCLK_150:
+		return 150000000;
+	case QIXIS_SYSCLK_160:
+		return 160000000;
+	case QIXIS_SYSCLK_166:
+		return 166666666;
+	}
+
+	return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+	if (if_board_diff_clk())
+		return get_board_sys_clk();
+	switch ((ddrclk_conf & 0x30) >> 4) {
+	case QIXIS_DDRCLK_100:
+		return 100000000;
+	case QIXIS_DDRCLK_125:
+		return 125000000;
+	case QIXIS_DDRCLK_133:
+		return 133333333;
+	}
+
+	return 66666666;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+void board_retimer_init(void)
+{
+	u8 reg;
+
+	/* Retimer is connected to I2C1_CH5 */
+	select_i2c_ch_pca9547(I2C_MUX_CH5);
+
+	/* Access to Control/Shared register */
+	reg = 0x0;
+	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+
+	/* Read device revision and ID */
+	i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
+	debug("Retimer version id = 0x%x\n", reg);
+
+	/* Enable Broadcast. All writes target all channel register sets */
+	reg = 0x0c;
+	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+
+	/* Reset Channel Registers */
+	i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+	reg |= 0x4;
+	i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+
+	/* Set data rate as 10.3125 Gbps */
+	reg = 0x90;
+	i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
+	reg = 0xb3;
+	i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
+	reg = 0x90;
+	i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
+	reg = 0xb3;
+	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
+	reg = 0xcd;
+	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
+
+	/* Select VCO Divider to full rate (000) */
+	i2c_read(I2C_RETIMER_ADDR, 0x2F, 1, &reg, 1);
+	reg &= 0x0f;
+	reg |= 0x70;
+	i2c_write(I2C_RETIMER_ADDR, 0x2F, 1, &reg, 1);
+
+#ifdef	CONFIG_TARGET_LS1088AQDS
+	/* Retimer is connected to I2C1_CH5 */
+	select_i2c_ch_pca9547(I2C_MUX_CH5);
+
+	/* Access to Control/Shared register */
+	reg = 0x0;
+	i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, &reg, 1);
+
+	/* Read device revision and ID */
+	i2c_read(I2C_RETIMER_ADDR2, 1, 1, &reg, 1);
+	debug("Retimer version id = 0x%x\n", reg);
+
+	/* Enable Broadcast. All writes target all channel register sets */
+	reg = 0x0c;
+	i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, &reg, 1);
+
+	/* Reset Channel Registers */
+	i2c_read(I2C_RETIMER_ADDR2, 0, 1, &reg, 1);
+	reg |= 0x4;
+	i2c_write(I2C_RETIMER_ADDR2, 0, 1, &reg, 1);
+
+	/* Set data rate as 10.3125 Gbps */
+	reg = 0x90;
+	i2c_write(I2C_RETIMER_ADDR2, 0x60, 1, &reg, 1);
+	reg = 0xb3;
+	i2c_write(I2C_RETIMER_ADDR2, 0x61, 1, &reg, 1);
+	reg = 0x90;
+	i2c_write(I2C_RETIMER_ADDR2, 0x62, 1, &reg, 1);
+	reg = 0xb3;
+	i2c_write(I2C_RETIMER_ADDR2, 0x63, 1, &reg, 1);
+	reg = 0xcd;
+	i2c_write(I2C_RETIMER_ADDR2, 0x64, 1, &reg, 1);
+
+	/* Select VCO Divider to full rate (000) */
+	i2c_read(I2C_RETIMER_ADDR2, 0x2F, 1, &reg, 1);
+	reg &= 0x0f;
+	reg |= 0x70;
+	i2c_write(I2C_RETIMER_ADDR2, 0x2F, 1, &reg, 1);
+#endif
+	/*return the default channel*/
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+}
+
+int board_init(void)
+{
+	init_final_memctl_regs();
+#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET)
+	u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE;
+#endif
+
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	board_retimer_init();
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET)
+	/* invert AQR105 IRQ pins polarity */
+	out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR105_IRQ_MASK);
+#endif
+
+#ifdef CONFIG_FSL_LS_PPA
+	ppa_init();
+#endif
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch3_early_init_f();
+	return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+	puts("\nDDR    ");
+	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
+	print_ddr_info(0);
+}
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_MC_ENET
+void fdt_fixup_board_enet(void *fdt)
+{
+	int offset;
+
+	offset = fdt_path_offset(fdt, "/fsl-mc");
+
+	if (offset < 0)
+		offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+
+	if (offset < 0) {
+		printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
+		       __func__, offset);
+		return;
+	}
+
+	if (get_mc_boot_status() == 0)
+		fdt_status_okay(fdt, offset);
+	else
+		fdt_status_fail(fdt, offset);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	int err, i;
+	u64 base[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	ft_cpu_setup(blob, bd);
+
+	/* fixup DT for the two GPP DDR banks */
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		base[i] = gd->bd->bi_dram[i].start;
+		size[i] = gd->bd->bi_dram[i].size;
+	}
+
+#ifdef CONFIG_RESV_RAM
+	/* reduce size if reserved memory is within this bank */
+	if (gd->arch.resv_ram >= base[0] &&
+	    gd->arch.resv_ram < base[0] + size[0])
+		size[0] = gd->arch.resv_ram - base[0];
+	else if (gd->arch.resv_ram >= base[1] &&
+		 gd->arch.resv_ram < base[1] + size[1])
+		size[1] = gd->arch.resv_ram - base[1];
+#endif
+
+	fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+
+#ifdef CONFIG_FSL_MC_ENET
+	fdt_fixup_board_enet(blob);
+	err = fsl_mc_ldpaa_exit(bd);
+	if (err)
+		return err;
+#endif
+
+	return 0;
+}
+#endif
diff --git a/board/freescale/ls1088a/ls1088a_qixis.h b/board/freescale/ls1088a/ls1088a_qixis.h
new file mode 100644
index 0000000..4790461
--- /dev/null
+++ b/board/freescale/ls1088a/ls1088a_qixis.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1088AQDS_QIXIS_H__
+#define __LS1088AQDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for LS1088AQDS */
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66			0x0
+#define QIXIS_SYSCLK_83			0x1
+#define QIXIS_SYSCLK_100		0x2
+#define QIXIS_SYSCLK_125		0x3
+#define QIXIS_SYSCLK_133		0x4
+#define QIXIS_SYSCLK_150		0x5
+#define QIXIS_SYSCLK_160		0x6
+#define QIXIS_SYSCLK_166		0x7
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66			0x0
+#define QIXIS_DDRCLK_100		0x1
+#define QIXIS_DDRCLK_125		0x2
+#define QIXIS_DDRCLK_133		0x3
+
+/* BRDCFG2 - SD clock*/
+#define QIXIS_SDCLK1_100		0x0
+#define QIXIS_SDCLK1_125		0x1
+#define QIXIS_SDCLK1_165		0x2
+#define QIXIS_SDCLK1_100_SP		0x3
+
+#define BRDCFG4_EMISEL_MASK		0xE0
+#define BRDCFG4_EMISEL_SHIFT		5
+#define BRDCFG9_SFPTX_MASK		0x10
+#define BRDCFG9_SFPTX_SHIFT		4
+
+#endif
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 83773d0..1842d14 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -226,15 +226,14 @@ int board_init(void)
 #endif
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	rtc_enable_32khz_output();
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
 
 #ifdef CONFIG_FSL_LS_PPA
 	ppa_init();
 #endif
 
-#ifdef CONFIG_FSL_CAAM
-	sec_init();
-#endif
-
 	return 0;
 }
 
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index 91f13ea..8da1c6d 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -21,3 +21,8 @@ LS2080A_SECURE_BOOT BOARD
 M:	Saksham Jain <saksham.jain@nxp.freescale.com>
 S:	Maintained
 F:	configs/ls2080ardb_SECURE_BOOT_defconfig
+
+LS2088A_QSPI_SECURE_BOOT BOARD
+M:	Udit Agarwal <udit.agarwal@nxp.com>
+S:	Maintained
+F:	configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 07ba026..666562d 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -218,6 +218,10 @@ int board_init(void)
 #ifdef CONFIG_FSL_QIXIS
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
 #endif
+
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
 #ifdef CONFIG_FSL_LS_PPA
 	ppa_init();
 #endif