diff options
author | Stefan Roese <sr@denx.de> | 2013-04-25 23:20:23 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2013-05-02 18:46:08 (GMT) |
commit | 8aa34499727936ede3f85033380720b4a9522aaa (patch) | |
tree | 7205023513e16840e74356e2f3d2a5f44f45a446 /board | |
parent | 704afcc43f5937f1b56d17a08cad7d8dc8b68717 (diff) | |
download | u-boot-8aa34499727936ede3f85033380720b4a9522aaa.tar.xz |
mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes
The changes to a3m071/a4m2k in summary are:
- Enable CAN1 on I2C in GPS Port Configuration
- Enable SPI on PSC2
- Activate network console
- New flash partitioning
- Fix some typos
- Pass host name to Linux
- Change rootfs to squashfs,jffs2
- Enable UBI/UBIFS support
- Enable FIT support
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board')
-rw-r--r-- | board/a3m071/a3m071.c | 26 |
1 files changed, 20 insertions, 6 deletions
diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c index 0f9f883..c62ba62 100644 --- a/board/a3m071/a3m071.c +++ b/board/a3m071/a3m071.c @@ -8,7 +8,7 @@ * (C) Copyright 2006 * MicroSys GmbH * - * Copyright 2012 Stefan Roese <sr@denx.de> + * Copyright 2012-2013 Stefan Roese <sr@denx.de> * * See file CREDITS for list of people who contributed to this * project. @@ -241,12 +241,26 @@ void spl_board_init(void) /* And write new value back to register */ out_be32(&mm->ipbi_ws_ctrl, val); -#endif - /* - * No need to change the pin multiplexing (MPC5XXX_GPS_PORT_CONFIG) - * as all 3 config versions (failsave level) have the same setup. - */ + + /* Setup pin multiplexing */ + if (failsavelevel == 2) { + /* fpga-version ok */ +#if defined(CONFIG_SYS_GPS_PORT_CONFIG_2) + out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_2); +#endif + } else if (failsavelevel == 1) { + /* digiboard-version ok - fpga not */ +#if defined(CONFIG_SYS_GPS_PORT_CONFIG_1) + out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_1); +#endif + } else { + /* full failsave-mode */ +#if defined(CONFIG_SYS_GPS_PORT_CONFIG) + out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG); +#endif + } +#endif /* * Setup gpio_wkup_7 as watchdog AS INPUT to disable it - see |