Merge with git://www.denx.de/git/u-boot.git

16 files changed, 613 insertions, 8 deletions

diff --git a/board/AtmarkTechno/suzaku/suzaku.c b/board/AtmarkTechno/suzaku/suzaku.c
index afe124a..267c476 100644
--- a/board/AtmarkTechno/suzaku/suzaku.c
+++ b/board/AtmarkTechno/suzaku/suzaku.c
@@ -24,7 +24,7 @@
 
 /* This is a board specific file.  It's OK to include board specific
  * header files */
-#include <asm/suzaku.h>
+#include <config.h>
 
 void do_reset(void)
 {
diff --git a/board/AtmarkTechno/suzaku/u-boot.lds b/board/AtmarkTechno/suzaku/u-boot.lds
index 00a8ef7..cb90854 100644
--- a/board/AtmarkTechno/suzaku/u-boot.lds
+++ b/board/AtmarkTechno/suzaku/u-boot.lds
@@ -61,6 +61,7 @@ SECTIONS
 	{
 		__bss_start = .;
 		*(.bss)
-		__bss_start = .;
+		__bss_end = .;
 	}
+	__end = . ;
 }
diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk
index 9ace886..5801a5f 100644
--- a/board/mpc8360emds/config.mk
+++ b/board/mpc8360emds/config.mk
@@ -26,3 +26,8 @@
 #
 
 TEXT_BASE = 0xFE000000
+
+#
+# Additional board-specific libraries
+#
+BOARDLIBS = libfdt/libfdt.a
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
index 535884c..deadb5f 100644
--- a/board/mpc8360emds/mpc8360emds.c
+++ b/board/mpc8360emds/mpc8360emds.c
@@ -31,6 +31,10 @@
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
 #endif
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#endif
 
 const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* GETH1 */
@@ -658,22 +662,36 @@ U_BOOT_CMD(ecc, 4, 0, do_ecc,
 	   "  - disables injects\n" "  - re-inits memory");
 #endif				/* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
+     && defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
+#if defined(CONFIG_OF_LIBFDT)
+	int nodeoffset;
+	int err;
+	int tmp[2];
+
+	nodeoffset = fdt_path_offset (fdt, "/memory");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(bd->bi_memstart);
+		tmp[1] = cpu_to_be32(bd->bi_memsize);
+		err = fdt_setprop(fdt, nodeoffset, "reg", tmp, sizeof(tmp));
+	}
+#else
 	u32 *p;
 	int len;
 
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
 	p = ft_get_prop(blob, "/memory/reg", &len);
 	if (p != NULL) {
 		*p++ = cpu_to_be32(bd->bi_memstart);
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
+#endif
+
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+	ft_cpu_setup(blob, bd);
 }
 #endif
diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
index 67cd709..158effe 100644
--- a/board/mpc8360emds/pci.c
+++ b/board/mpc8360emds/pci.c
@@ -21,6 +21,10 @@
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
 #endif
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#endif
 
 #include <asm/fsl_i2c.h>
 
@@ -299,6 +303,22 @@ void pci_init_board(void)
 }
 #endif				/* CONFIG_PCISLAVE */
 
+#if defined(CONFIG_OF_LIBFDT)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	int nodeoffset;
+	int err;
+	int tmp[2];
+
+	nodeoffset = fdt_path_offset (fdt, "/" OF_SOC "/pci@8500");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(hose[0].first_busno);
+		tmp[1] = cpu_to_be32(hose[0].last_busno);
+		err = fdt_setprop(fdt, nodeoffset, "bus-range", tmp, sizeof(tmp));
+	}
+}
+#endif				/* CONFIG_OF_LIBFDT */
 #ifdef CONFIG_OF_FLAT_TREE
 void
 ft_pci_setup(void *blob, bd_t *bd)
diff --git a/board/xilinx/ml401/Makefile b/board/xilinx/ml401/Makefile
new file mode 100644
index 0000000..9ab5633
--- /dev/null
+++ b/board/xilinx/ml401/Makefile
@@ -0,0 +1,65 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../xilinx_enet)
+endif
+
+INCS		:= -I../common -I../xilinx_enet
+CFLAGS		+= $(INCS)
+HOST_CFLAGS	+= $(INCS)
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o \
+	  ../xilinx_enet/emac_adapter.o  ../xilinx_enet/xemac.o \
+	  ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
+	  ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
+	  ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
+	  ../common/xbasic_types.o ../common/xdma_channel.o \
+	  ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
+	  ../common/xversion.o \
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xilinx/ml401/config.mk b/board/xilinx/ml401/config.mk
new file mode 100644
index 0000000..807f169
--- /dev/null
+++ b/board/xilinx/ml401/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2007 Michal Simek
+#
+# Michal  SIMEK <monstr@monstr.eu>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# CAUTION: This file is automatically generated by libgen.
+# Version: Xilinx EDK 6.3 EDK_Gmm.12.3
+#
+
+TEXT_BASE = 0x12000000
+
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
diff --git a/board/xilinx/ml401/ml401.c b/board/xilinx/ml401/ml401.c
new file mode 100644
index 0000000..b48103f
--- /dev/null
+++ b/board/xilinx/ml401/ml401.c
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal  SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This is a board specific file.  It's OK to include board specific
+ * header files */
+
+#include <common.h>
+#include <config.h>
+
+void do_reset (void)
+{
+#ifdef CFG_GPIO_0
+	*((unsigned long *)(CFG_GPIO_0_ADDR)) =
+	    ++(*((unsigned long *)(CFG_GPIO_0_ADDR)));
+#endif
+#ifdef CFG_RESET_ADDRESS
+	puts ("Reseting board\n");
+	asm ("bra r0");
+#endif
+}
+
+int gpio_init (void)
+{
+#ifdef CFG_GPIO_0
+	*((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0;
+#endif
+	return 0;
+}
diff --git a/board/xilinx/ml401/u-boot.lds b/board/xilinx/ml401/u-boot.lds
new file mode 100644
index 0000000..cb90854
--- /dev/null
+++ b/board/xilinx/ml401/u-boot.lds
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text ALIGN(0x4):
+	{
+		__text_start = .;
+		cpu/microblaze/start.o (.text)
+		*(.text)
+		__text_end = .;
+	}
+
+	.rodata ALIGN(0x4):
+	{
+		__rodata_start = .;
+		*(.rodata)
+		__rodata_end = .;
+	}
+
+	.data ALIGN(0x4):
+	{
+		__data_start = .;
+		*(.data)
+		__data_end = .;
+	}
+
+	.u_boot_cmd ALIGN(0x4):
+	{
+		. = .;
+		__u_boot_cmd_start = .;
+		*(.u_boot_cmd)
+		__u_boot_cmd_end = .;
+	}
+
+	.bss ALIGN(0x4):
+	{
+		__bss_start = .;
+		*(.bss)
+		__bss_end = .;
+	}
+	__end = . ;
+}
diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/ml401/xparameters.h
new file mode 100644
index 0000000..18d24f9
--- /dev/null
+++ b/board/xilinx/ml401/xparameters.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal  SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 6.3 EDK_Gmm.12.3
+ */
+
+/* System Clock Frequency */
+#define XILINX_CLOCK_FREQ	66666667
+
+/* Interrupt controller is intc_0 */
+#define XILINX_INTC_BASEADDR	0xd1000fc0
+#define XILINX_INTC_NUM_INTR_INPUTS	12
+
+/* Timer pheriphery is opb_timer_0 */
+#define XILINX_TIMER_BASEADDR	0xa2000000
+#define XILINX_TIMER_IRQ	0
+
+/* Uart pheriphery is console_uart */
+#define XILINX_UART_BASEADDR	0xa0000000
+#define XILINX_UART_BAUDRATE	115200
+
+/* GPIO is opb_gpio_0*/
+#define XILINX_GPIO_BASEADDR	0x90000000
+
+/* Flash Memory is opb_emc_0 */
+#define XILINX_FLASH_START	0x28000000
+#define XILINX_FLASH_SIZE	0x00800000
+
+/* Main Memory is plb_ddr_0 */
+#define XILINX_RAM_START	0x10000000
+#define XILINX_RAM_SIZE	0x10000000
+
+/* Sysace Controller is opb_sysace_0 */
+#define XILINX_SYSACE_BASEADDR	0xCF000000
+#define XILINX_SYSACE_HIGHADDR	0xCF0001FF
+#define XILINX_SYSACE_MEM_WIDTH	16
+
+/* Ethernet controller is opb_ethernet_0 */
+#define XPAR_XEMAC_NUM_INSTANCES	1
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID	0
+#define XPAR_OPB_ETHERNET_0_BASEADDR	0x60000000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR	0x60003FFF
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT	1
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST	1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST	1
diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c
index f159cb6..d340303 100644
--- a/board/xilinx/xilinx_enet/emac_adapter.c
+++ b/board/xilinx/xilinx_enet/emac_adapter.c
@@ -147,7 +147,11 @@ eth_rx(void)
 	RecvFrameLength = PKTSIZE;
 	Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength);
 	if (Result == XST_SUCCESS) {
+#ifndef CONFIG_EMACLITE
 		NetReceive((uchar *)etherrxbuff, RecvFrameLength);
+#else
+		NetReceive(etherrxbuff, RecvFrameLength);
+#endif
 		return (1);
 	} else {
 		return (0);
diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile
new file mode 100644
index 0000000..9ab5633
--- /dev/null
+++ b/board/xilinx/xupv2p/Makefile
@@ -0,0 +1,65 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../xilinx_enet)
+endif
+
+INCS		:= -I../common -I../xilinx_enet
+CFLAGS		+= $(INCS)
+HOST_CFLAGS	+= $(INCS)
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o \
+	  ../xilinx_enet/emac_adapter.o  ../xilinx_enet/xemac.o \
+	  ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
+	  ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
+	  ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
+	  ../common/xbasic_types.o ../common/xdma_channel.o \
+	  ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
+	  ../common/xversion.o \
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk
new file mode 100644
index 0000000..c07b0b3
--- /dev/null
+++ b/board/xilinx/xupv2p/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2007 Michal Simek
+#
+# Michal  SIMEK <monstr@monstr.eu>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# CAUTION: This file is automatically generated by libgen.
+# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
+#
+
+TEXT_BASE = 0x38000000
+
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
diff --git a/board/xilinx/xupv2p/u-boot.lds b/board/xilinx/xupv2p/u-boot.lds
new file mode 100644
index 0000000..cb90854
--- /dev/null
+++ b/board/xilinx/xupv2p/u-boot.lds
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text ALIGN(0x4):
+	{
+		__text_start = .;
+		cpu/microblaze/start.o (.text)
+		*(.text)
+		__text_end = .;
+	}
+
+	.rodata ALIGN(0x4):
+	{
+		__rodata_start = .;
+		*(.rodata)
+		__rodata_end = .;
+	}
+
+	.data ALIGN(0x4):
+	{
+		__data_start = .;
+		*(.data)
+		__data_end = .;
+	}
+
+	.u_boot_cmd ALIGN(0x4):
+	{
+		. = .;
+		__u_boot_cmd_start = .;
+		*(.u_boot_cmd)
+		__u_boot_cmd_end = .;
+	}
+
+	.bss ALIGN(0x4):
+	{
+		__bss_start = .;
+		*(.bss)
+		__bss_end = .;
+	}
+	__end = . ;
+}
diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h
new file mode 100644
index 0000000..a96c693
--- /dev/null
+++ b/board/xilinx/xupv2p/xparameters.h
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal  SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
+ */
+
+/* System Clock Frequency */
+#define XILINX_CLOCK_FREQ	100000000
+
+/* Interrupt controller is opb_intc_0 */
+#define XILINX_INTC_BASEADDR	0x41200000
+#define XILINX_INTC_NUM_INTR_INPUTS	11
+
+/* Timer pheriphery is opb_timer_1 */
+#define XILINX_TIMER_BASEADDR	0x41c00000
+#define XILINX_TIMER_IRQ	1
+
+/* Uart pheriphery is RS232_Uart_1 */
+#define XILINX_UART_BASEADDR	0x40600000
+#define XILINX_UART_BAUDRATE	115200
+
+/* GPIO is LEDs_4Bit*/
+#define XILINX_GPIO_BASEADDR	0x40000000
+
+/* FLASH doesn't exist none */
+
+/* Main Memory is DDR_256MB_32MX64_rank1_row13_col10_cl2_5 */
+#define XILINX_RAM_START	0x30000000
+#define XILINX_RAM_SIZE	0x10000000
+
+/* Sysace Controller is SysACE_CompactFlash */
+#define XILINX_SYSACE_BASEADDR	0x41800000
+#define XILINX_SYSACE_HIGHADDR	0x4180ffff
+#define XILINX_SYSACE_MEM_WIDTH	16
+
+/* Ethernet controller is Ethernet_MAC */
+#define XPAR_XEMAC_NUM_INSTANCES	1
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID	0
+#define XPAR_OPB_ETHERNET_0_BASEADDR	0x40c00000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR	0x40c0ffff
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT	1
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST	1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST	1
diff --git a/board/xilinx/xupv2p/xupv2p.c b/board/xilinx/xupv2p/xupv2p.c
new file mode 100644
index 0000000..b48103f
--- /dev/null
+++ b/board/xilinx/xupv2p/xupv2p.c
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal  SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This is a board specific file.  It's OK to include board specific
+ * header files */
+
+#include <common.h>
+#include <config.h>
+
+void do_reset (void)
+{
+#ifdef CFG_GPIO_0
+	*((unsigned long *)(CFG_GPIO_0_ADDR)) =
+	    ++(*((unsigned long *)(CFG_GPIO_0_ADDR)));
+#endif
+#ifdef CFG_RESET_ADDRESS
+	puts ("Reseting board\n");
+	asm ("bra r0");
+#endif
+}
+
+int gpio_init (void)
+{
+#ifdef CFG_GPIO_0
+	*((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0;
+#endif
+	return 0;
+}