diff options
author | wdenk <wdenk> | 2004-06-09 13:37:52 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2004-06-09 13:37:52 (GMT) |
commit | f39748ae8edb03017647b0d731cdd06e7bdcde13 (patch) | |
tree | 1401c99d4d11bef3828da3bda191e8923f3f1147 /board | |
parent | aa24509041ff8a4892071c2abec023dddd53874f (diff) | |
download | u-boot-f39748ae8edb03017647b0d731cdd06e7bdcde13.tar.xz |
* Patch by Paul Ruhland, 17 May 2004:
- Add support for the Logic Zoom LH7A40x based SDK board(s),
specifically the LPD7A400.
* Patches by Robert Schwebel, 15 May 2004:
- call MAC address reading code also for SMSC91C111;
- make SMSC91C111 timeout configurable, remove duplicate code
- fix get_timer() for PXA
- update doc/README.JFFS2
- use "bootfile" env variable also for jffs2
Diffstat (limited to 'board')
-rw-r--r-- | board/lpd7a40x/Makefile | 47 | ||||
-rw-r--r-- | board/lpd7a40x/config.mk | 38 | ||||
-rw-r--r-- | board/lpd7a40x/flash.c | 494 | ||||
-rw-r--r-- | board/lpd7a40x/lpd7a40x.c | 82 | ||||
-rw-r--r-- | board/lpd7a40x/memsetup.S | 212 | ||||
-rw-r--r-- | board/lpd7a40x/u-boot.lds | 56 |
6 files changed, 929 insertions, 0 deletions
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile new file mode 100644 index 0000000..f0999d1 --- /dev/null +++ b/board/lpd7a40x/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := lpd7a40x.o flash.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk new file mode 100644 index 0000000..bc03874 --- /dev/null +++ b/board/lpd7a40x/config.mk @@ -0,0 +1,38 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine +# w/Sharp LH7A400 SoC (ARM920T) cpu +# + +# +# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000 +# +# Linux-Kernel is @ 0xC0008000, entry 0xc0008000 +# params @ 0xc0000100 +# optionally with a ramdisk at 0xc0300000 +# +# we load ourself to 0xc1fc0000 (32M - 256K) +# +# download area is 0xc0f00000 +# + +TEXT_BASE = 0xc1fc0000 +#TEXT_BASE = 0x00000000 diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c new file mode 100644 index 0000000..26a9ce4 --- /dev/null +++ b/board/lpd7a40x/flash.c @@ -0,0 +1,494 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ + +#include <common.h> +#include <environment.h> + +#define FLASH_BANK_SIZE 0x1000000 /* 16MB (2 x 8 MB) */ +#define MAIN_SECT_SIZE 0x40000 /* 256KB (2 x 128kB) */ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + + +#define CMD_READ_ARRAY 0x00FF00FF +#define CMD_IDENTIFY 0x00900090 +#define CMD_ERASE_SETUP 0x00200020 +#define CMD_ERASE_CONFIRM 0x00D000D0 +#define CMD_PROGRAM 0x00400040 +#define CMD_RESUME 0x00D000D0 +#define CMD_SUSPEND 0x00B000B0 +#define CMD_STATUS_READ 0x00700070 +#define CMD_STATUS_RESET 0x00500050 + +#define BIT_BUSY 0x00800080 +#define BIT_ERASE_SUSPEND 0x00400040 +#define BIT_ERASE_ERROR 0x00200020 +#define BIT_PROGRAM_ERROR 0x00100010 +#define BIT_VPP_RANGE_ERROR 0x00080008 +#define BIT_PROGRAM_SUSPEND 0x00040004 +#define BIT_PROTECT_ERROR 0x00020002 +#define BIT_UNDEFINED 0x00010001 + +#define BIT_SEQUENCE_ERROR 0x00300030 +#define BIT_TIMEOUT 0x80000000 + +/*----------------------------------------------------------------------- + */ + +ulong flash_init (void) +{ + int i, j; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = + (INTEL_MANUFACT & FLASH_VENDMASK) | + (INTEL_ID_28F640J3A & FLASH_TYPEMASK); + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i == 0) + flashbase = CFG_FLASH_BASE; + else + panic ("configured too many flash banks!\n"); + for (j = 0; j < flash_info[i].sector_count; j++) { + flash_info[i].start[j] = flashbase; + + /* uniform sector size */ + flashbase += MAIN_SECT_SIZE; + } + size += flash_info[i].size; + } + + /* + * Protect monitor and environment sectors + */ + flash_protect ( FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect ( FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); + +#ifdef CFG_ENV_ADDR_REDUND + flash_protect ( FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1, + &flash_info[0]); +#endif + + return size; +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (INTEL_MANUFACT & FLASH_VENDMASK): + printf ("Intel: "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case (INTEL_ID_28F640J3A & FLASH_TYPEMASK): + printf ("2x 28F640J3A (64Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + return; + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); +} + +/*----------------------------------------------------------------------- + */ + +int flash_error (ulong code) +{ + /* Check bit patterns */ + /* SR.7=0 is busy, SR.7=1 is ready */ + /* all other flags indicate error on 1 */ + /* SR.0 is undefined */ + /* Timeout is our faked flag */ + + /* sequence is described in Intel 290644-005 document */ + + /* check Timeout */ + if (code & BIT_TIMEOUT) { + puts ("Timeout\n"); + return ERR_TIMOUT; + } + + /* check Busy, SR.7 */ + if (~code & BIT_BUSY) { + puts ("Busy\n"); + return ERR_PROG_ERROR; + } + + /* check Vpp low, SR.3 */ + if (code & BIT_VPP_RANGE_ERROR) { + puts ("Vpp range error\n"); + return ERR_PROG_ERROR; + } + + /* check Device Protect Error, SR.1 */ + if (code & BIT_PROTECT_ERROR) { + puts ("Device protect error\n"); + return ERR_PROG_ERROR; + } + + /* check Command Seq Error, SR.4 & SR.5 */ + if (code & BIT_SEQUENCE_ERROR) { + puts ("Command seqence error\n"); + return ERR_PROG_ERROR; + } + + /* check Block Erase Error, SR.5 */ + if (code & BIT_ERASE_ERROR) { + puts ("Block erase error\n"); + return ERR_PROG_ERROR; + } + + /* check Program Error, SR.4 */ + if (code & BIT_PROGRAM_ERROR) { + puts ("Program error\n"); + return ERR_PROG_ERROR; + } + + /* check Block Erase Suspended, SR.6 */ + if (code & BIT_ERASE_SUSPEND) { + puts ("Block erase suspended\n"); + return ERR_PROG_ERROR; + } + + /* check Program Suspended, SR.2 */ + if (code & BIT_PROGRAM_SUSPEND) { + puts ("Program suspended\n"); + return ERR_PROG_ERROR; + } + + /* OK, no error */ + return ERR_OK; +} + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + ulong result, result1; + int iflag, prot, sect; + int rc = ERR_OK; + +#ifdef USE_920T_MMU + int cflag; +#endif + + debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last); + + /* first look for protection bits */ + + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; + } + + if ((info->flash_id & FLASH_VENDMASK) != + (INTEL_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ +#ifdef USE_920T_MMU + cflag = dcache_status (); + dcache_disable (); +#endif + iflag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + + debug ("Erasing sector %2d @ %08lX... ", + sect, info->start[sect]); + + /* arm simple, non interrupt dependent timer */ + reset_timer(); + + if (info->protect[sect] == 0) { /* not protected */ + vu_long *addr = (vu_long *) (info->start[sect]); + ulong bsR7, bsR7_2, bsR5, bsR5_2; + ulong tstart; + + /* *addr = CMD_STATUS_RESET; */ + *addr = CMD_ERASE_SETUP; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + tstart = get_timer(0); + do { + ulong now; + /* check timeout */ + //if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer(tstart)) > CFG_FLASH_ERASE_TOUT) { + printf("tstart = 0x%08lx, now = 0x%08lx\n", tstart, now); + *addr = CMD_STATUS_RESET; + result = BIT_TIMEOUT; + break; + } + + *addr = CMD_STATUS_READ; + result = *addr; + bsR7 = result & (1 << 7); + bsR7_2 = result & (1 << 23); + } while (!bsR7 | !bsR7_2); + + *addr = CMD_STATUS_READ; + result1 = *addr; + bsR5 = result1 & (1 << 5); + bsR5_2 = result1 & (1 << 21); +#ifdef SAMSUNG_FLASH_DEBUG + printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); + if (bsR5 != 0 && bsR5_2 != 0) + printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); +#endif + + *addr = CMD_READ_ARRAY; + *addr = CMD_RESUME; + + if ((rc = flash_error (result)) != ERR_OK) + goto outahere; +#if 0 + printf ("ok.\n"); + } else { /* it was protected */ + + printf ("protected!\n"); +#endif + } + } + +outahere: + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); + + if (iflag) + enable_interrupts (); + +#ifdef USE_920T_MMU + if (cflag) + dcache_enable (); +#endif + return rc; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash + */ + +volatile static int write_word (flash_info_t * info, ulong dest, + ulong data) +{ + vu_long *addr = (vu_long *) dest; + ulong result; + int rc = ERR_OK; + int iflag; + +#ifdef USE_920T_MMU + int cflag; +#endif + + /* + * Check if Flash is (sufficiently) erased + */ + result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ +#ifdef USE_920T_MMU + cflag = dcache_status (); + dcache_disable (); +#endif + iflag = disable_interrupts (); + + /* *addr = CMD_STATUS_RESET; */ + *addr = CMD_PROGRAM; + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait until flash is ready */ + do { + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + *addr = CMD_SUSPEND; + result = BIT_TIMEOUT; + break; + } + + *addr = CMD_STATUS_READ; + result = *addr; + } while (~result & BIT_BUSY); + + /* *addr = CMD_READ_ARRAY; */ + *addr = CMD_STATUS_READ; + result = *addr; + + rc = flash_error (result); + + if (iflag) + enable_interrupts (); + +#ifdef USE_920T_MMU + if (cflag) + dcache_enable (); +#endif + *addr = CMD_READ_ARRAY; + *addr = CMD_RESUME; + return rc; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash. + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int l; + int i, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 24); + } + for (; i < 4 && cnt > 0; ++i) { + data = (data >> 8) | (*src++ << 24); + --cnt; + ++cp; + } + for (; cnt == 0 && i < 4; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 24); + } + + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = *((vu_long *) src); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 4; + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return ERR_OK; + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 24); + --cnt; + } + for (; i < 4; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 24); + } + + return write_word (info, wp, data); +} diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c new file mode 100644 index 0000000..8492df3 --- /dev/null +++ b/board/lpd7a40x/lpd7a40x.c @@ -0,0 +1,82 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#if defined(CONFIG_LH7A400) +#include <lh7a400.h> +#include <lpd7a400_cpld.h> +#elif defined(CONFIG_LH7A404) +#include <lh7a404.h> +#include <lpd7a404_cpld.h> +#else +#error "No CPU defined!" +#endif + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* set up the I/O ports */ + +#if defined(CONFIG_LH7A400) + + /* enable flash programming */ + *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN; + + /* Auto wakeup, LCD disable, WLAN enable */ + *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &= + ~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE); + + /* Status LED 2 on (leds are active low) */ + *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) = + (EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2); + + /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */ + gd->bd->bi_arch_number = MACH_TYPE_LPD7A400; + +#elif defined(CONFIG_LH7A404) +#endif + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xc0000100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} diff --git a/board/lpd7a40x/memsetup.S b/board/lpd7a40x/memsetup.S new file mode 100644 index 0000000..09ab5e7 --- /dev/null +++ b/board/lpd7a40x/memsetup.S @@ -0,0 +1,212 @@ +/* + * Memory Setup - initialize memory controller(s) for devices required + * to boot and relocate + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> + + +/* memory controller */ +#define BCRX_DEFAULT (0x0000fbe0) +#define BCRX_MW_8 (0x00000000) +#define BCRX_MW_16 (0x10000000) +#define BCRX_MW_32 (0x20000000) +#define BCRX_PME (0x08000000) +#define BCRX_WP (0x04000000) +#define BCRX_WST2_SHIFT (11) +#define BCRX_WST1_SHIFT (5) +#define BCRX_IDCY_SHIFT (0) + +/* Bank0 Async Flash */ +#define BCR0 (0x80002000) +#define BCR0_FLASH (BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT)) + +/* Bank1 Open */ +#define BCR1 (0x80002004) + +/* Bank2 Not used (EEPROM?) */ +#define BCR2 (0x80002008) + +/* Bank3 Not used */ +#define BCR3 (0x8000200C) + +/* Bank4 PC Card1 */ + +/* Bank5 PC Card2 */ + +/* Bank6 CPLD IO Controller Peripherals (slow) */ +#define BCR6 (0x80002018) +#define BCR6_CPLD_SLOW (BCRX_DEFAULT | BCRX_MW_16) + +/* Bank7 CPLD IO Controller Peripherals (fast) */ +#define BCR7 (0x8000201C) +#define BCR7_CPLD_FAST (BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT)) + +/* SDRAM */ +#define GBLCNFG (0x80002404) +#define GC_CKE (0x80000000) +#define GC_CKSD (0x40000000) +#define GC_LCR (0x00000040) +#define GC_SMEMBURST (0x00000020) +#define GC_MRS (0x00000002) +#define GC_INIT (0x00000001) + +#define GC_CMD_NORMAL (GC_CKE) +#define GC_CMD_MODE (GC_CKE | GC_MRS) +#define GC_CMD_SYNCFLASH_LOAD (GC_CKE | GC_MRS | GC_LCR) +#define GC_CMD_PRECHARGEALL (GC_CKE | GC_INIT) +#define GC_CMD_NOP (GC_CKE | GC_INIT | GC_MRS) + +#define RFSHTMR (0x80002408) +#define RFSHTMR_INIT (10) /* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */ +#define RFSHTMR_NORMAL (1500) /* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */ + +#define SDCSCX_BASE (0x80002410) +#define SDCSCX_DEFAULT (0x01220008) +#define SDCSCX_AUTOPC (0x01000000) +#define SDCSCX_RAS2CAS_2 (0x00200000) +#define SDCSCX_RAS2CAS_3 (0x00300000) +#define SDCSCX_WBL (0x00080000) +#define SDCSCX_CASLAT_8 (0x00070000) +#define SDCSCX_CASLAT_7 (0x00060000) +#define SDCSCX_CASLAT_6 (0x00050000) +#define SDCSCX_CASLAT_5 (0x00040000) +#define SDCSCX_CASLAT_4 (0x00030000) +#define SDCSCX_CASLAT_3 (0x00020000) +#define SDCSCX_CASLAT_2 (0x00010000) +#define SDCSCX_2KPAGE (0x00000040) +#define SDCSCX_SROMLL (0x00000020) +#define SDCSCX_SROM512 (0x00000010) +#define SDCSCX_4BNK (0x00000008) +#define SDCSCX_2BNK (0x00000000) +#define SDCSCX_EBW_16 (0x00000004) +#define SDCSCX_EBW_32 (0x00000000) + +#define SDRAM_BASE (0xC0000000) +#define SDCSC_BANK_OFFSET (0x10000000) + +/* + * The SDRAM DEVICE MODE PROGRAMMING VALUE + */ +#define BURST_LENGTH_4 (0x010 << 10) +#define BURST_LENGTH_8 (0x011 << 10) +#define WBURST_LENGTH_BL (0x01 << 19) +#define WBURST_LENGTH_SINGLE (0x01 << 19) +#define CAS_2 (0x010 << 14) +#define CAS_3 (0x011 << 14) +#define BAT_SEQUENTIAL (0 << 13) +#define BAT_INTERLEAVED (1 << 13) +#define OPM_NORMAL (0x00 << 17) +#define SDRAM_DEVICE_MODE (WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4) + + +#define TIMER1_BASE (0x80000C00) + +/* + * special lookup flags + */ +#define DO_MEM_DELAY 1 +#define DO_MEM_READ 2 + +_TEXT_BASE: + .word TEXT_BASE + +.globl memsetup +memsetup: + mov r9, lr @ save return address + + /* memory control configuration */ + /* make r0 relative the current location so that it */ + /* reads INITMEM_DATA out of FLASH rather than memory ! */ + /* r0 = current word pointer */ + /* r1 = end word location, one word past last actual word */ + /* r3 = address for writes, special lookup flags */ + /* r4 = value for writes, delay constants, or read addresses */ + /* r2 = location for mem reads */ + + ldr r0, =INITMEM_DATA + ldr r1, _TEXT_BASE + sub r0, r0, r1 + add r1, r0, #112 + +mem_loop: + cmp r1, r0 + moveq pc, r9 @ Done + + ldr r3, [r0], #4 @ Fetch Destination Register Address, or 1 for delay + ldr r4, [r0], #4 @ value + + cmp r3, #DO_MEM_DELAY + bleq mem_delay + beq mem_loop + cmp r3, #DO_MEM_READ + ldreq r2, [r4] + beq mem_loop + str r4, [r3] @ normal register/ram store + b mem_loop + +mem_delay: + ldr r5, =TIMER1_BASE + mov r6, r4, LSR #1 @ timer resolution is ~2us + str r6, [r5] + mov r6, #0x88 @ using 508.469KHz clock, enable + str r6, [r5, #8] +0: ldr r6, [r5, #4] @ timer value + cmp r6, #0 + bne 0b + mov r6, #0 @ disable timer + str r6, [r5, #8] + mov pc, lr + + .ltorg +/* the literal pools origin */ + +INITMEM_DATA: + .word BCR0 + .word BCR0_FLASH + .word BCR6 + .word BCR6_CPLD_SLOW + .word BCR7 + .word BCR7_CPLD_FAST + .word SDCSCX_BASE + .word (SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32) + .word GBLCNFG + .word GC_CMD_NOP + .word DO_MEM_DELAY + .word 200 + .word GBLCNFG + .word GC_CMD_PRECHARGEALL + .word RFSHTMR + .word RFSHTMR_INIT + .word DO_MEM_DELAY + .word 8 + .word RFSHTMR + .word RFSHTMR_NORMAL + .word GBLCNFG + .word GC_CMD_MODE + .word DO_MEM_READ + .word (SDRAM_BASE | SDRAM_DEVICE_MODE) + .word GBLCNFG + .word GC_CMD_NORMAL + .word SDCSCX_BASE + .word (SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32) diff --git a/board/lpd7a40x/u-boot.lds b/board/lpd7a40x/u-boot.lds new file mode 100644 index 0000000..719d8b1 --- /dev/null +++ b/board/lpd7a40x/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/lh7a40x/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} |