spi, sf: Use offset and size in sf cmd from mtdpartition

With this patch, it is possible to get the offset and size information
from the mtdpartiton setting in "mtdparts", similiar to the
"nand" commandos.

=> sf
sf - SPI flash sub-system

Usage:
sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
                                  and chip select
sf read addr offset|partition len       - read `len' bytes starting at
                                          `offset' to memory at `addr'
sf write addr offset|partition len      - write `len' bytes from memory
                                          at `addr' to flash at `offset'
sf erase offset|partition [+]len        - erase `len' bytes from `offset'
                                          `+len' round up `len' to block size
sf update addr offset|partition len     - erase and write `len' bytes from memory
                                          at `addr' to flash at `offset'
=>
for example "env" is defined in mtdparts:

=> sf read 13000000 env
device 0 offset 0xd0000, size 0x10000
SF: 65536 bytes @ 0xd0000 Read: OK

zynq-uboot> mtdparts add nor0 0x10000@0x0 env
zynq-uboot> sf erase env 0x10000
SF: 65536 bytes @ 0x0 Erased: OK

zynq-uboot> sf write 0x100 env
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Written: OK

zynq-uboot> sf read 0x40000 env
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Read: OK

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>

1 files changed, 29 insertions, 25 deletions

diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index ed3e398..9bced29 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -13,6 +13,8 @@
 #include <mapmem.h>
 #include <spi.h>
 #include <spi_flash.h>
+#include <jffs2/jffs2.h>
+#include <linux/mtd/mtd.h>
 
 #include <asm/io.h>
 #include <dm/device-internal.h>
@@ -254,23 +256,21 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset,
 static int do_spi_flash_read_write(int argc, char * const argv[])
 {
 	unsigned long addr;
-	unsigned long offset;
-	unsigned long len;
 	void *buf;
 	char *endp;
 	int ret = 1;
+	int dev = 0;
+	loff_t offset, len, maxsize;
 
-	if (argc < 4)
+	if (argc < 3)
 		return -1;
 
 	addr = simple_strtoul(argv[1], &endp, 16);
 	if (*argv[1] == 0 || *endp != 0)
 		return -1;
-	offset = simple_strtoul(argv[2], &endp, 16);
-	if (*argv[2] == 0 || *endp != 0)
-		return -1;
-	len = simple_strtoul(argv[3], &endp, 16);
-	if (*argv[3] == 0 || *endp != 0)
+
+	if (mtd_arg_off_size(argc - 2, &argv[2], &dev, &offset, &len,
+			     &maxsize, MTD_DEV_TYPE_NOR, flash->size))
 		return -1;
 
 	/* Consistency checking */
@@ -309,31 +309,31 @@ static int do_spi_flash_read_write(int argc, char * const argv[])
 
 static int do_spi_flash_erase(int argc, char * const argv[])
 {
-	unsigned long offset;
-	unsigned long len;
-	char *endp;
 	int ret;
+	int dev = 0;
+	loff_t offset, len, maxsize;
+	ulong size;
 
 	if (argc < 3)
 		return -1;
 
-	offset = simple_strtoul(argv[1], &endp, 16);
-	if (*argv[1] == 0 || *endp != 0)
+	if (mtd_arg_off(argv[1], &dev, &offset, &len, &maxsize,
+			MTD_DEV_TYPE_NOR, flash->size))
 		return -1;
 
-	ret = sf_parse_len_arg(argv[2], &len);
+	ret = sf_parse_len_arg(argv[2], &size);
 	if (ret != 1)
 		return -1;
 
 	/* Consistency checking */
-	if (offset + len > flash->size) {
+	if (offset + size > flash->size) {
 		printf("ERROR: attempting %s past flash size (%#x)\n",
 		       argv[0], flash->size);
 		return 1;
 	}
 
-	ret = spi_flash_erase(flash, offset, len);
-	printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)len, (u32)offset,
+	ret = spi_flash_erase(flash, offset, size);
+	printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)size, (u32)offset,
 	       ret ? "ERROR" : "OK");
 
 	return ret == 0 ? 0 : 1;
@@ -558,13 +558,17 @@ U_BOOT_CMD(
 	"SPI flash sub-system",
 	"probe [[bus:]cs] [hz] [mode]	- init flash device on given SPI bus\n"
 	"				  and chip select\n"
-	"sf read addr offset len	- read `len' bytes starting at\n"
-	"				  `offset' to memory at `addr'\n"
-	"sf write addr offset len	- write `len' bytes from memory\n"
-	"				  at `addr' to flash at `offset'\n"
-	"sf erase offset [+]len		- erase `len' bytes from `offset'\n"
-	"				  `+len' round up `len' to block size\n"
-	"sf update addr offset len	- erase and write `len' bytes from memory\n"
-	"				  at `addr' to flash at `offset'"
+	"sf read addr offset|partition len	- read `len' bytes starting at\n"
+	"				          `offset' or from start of mtd\n"
+	"					  `partition'to memory at `addr'\n"
+	"sf write addr offset|partition len	- write `len' bytes from memory\n"
+	"				          at `addr' to flash at `offset'\n"
+	"					  or to start of mtd `partition'\n"
+	"sf erase offset|partition [+]len	- erase `len' bytes from `offset'\n"
+	"					  or from start of mtd `partition'\n"
+	"					 `+len' round up `len' to block size\n"
+	"sf update addr offset|partition len	- erase and write `len' bytes from memory\n"
+	"					  at `addr' to flash at `offset'\n"
+	"					  or to start of mtd `partition'\n"
 	SF_TEST_HELP
 );