OMAP: networking support for SPL

This patch adds support for networking in SPL. Some devices are
capable of loading SPL via network so it makes sense to load the
main U-Boot binary via network too. This patch tries to use
existing network code as much as possible. Unfortunately, it depends
on environment which in turn depends on other code so SPL size
is increased significantly. No effort was done to decouple network
code and environment so far.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@ti.com>

6 files changed, 79 insertions, 2 deletions

diff --git a/common/Makefile b/common/Makefile
index 125b2be..5442fbb 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -198,6 +198,10 @@ endif
 
 ifdef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 endif
 COBJS-y += console.o
 COBJS-y += dlmalloc.o
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 3474bc6..8ecc498 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -103,6 +103,7 @@ int get_env_id(void)
 	return env_id;
 }
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * Command interface: print one or all environment variables
  *
@@ -196,6 +197,7 @@ static int do_env_grep(cmd_tbl_t *cmdtp, int flag,
 	return rcode;
 }
 #endif
+#endif /* CONFIG_SPL_BUILD */
 
 /*
  * Perform consistency checking before setting, replacing, or deleting an
@@ -437,6 +439,7 @@ int setenv_addr(const char *varname, const void *addr)
 	return setenv(varname, str);
 }
 
+#ifndef CONFIG_SPL_BUILD
 int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc < 2)
@@ -536,6 +539,7 @@ int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	return setenv(argv[1], buffer);
 }
 #endif /* CONFIG_CMD_EDITENV */
+#endif /* CONFIG_SPL_BUILD */
 
 /*
  * Look up variable from environment,
@@ -621,6 +625,7 @@ ulong getenv_ulong(const char *name, int base, ulong default_val)
 	return str ? simple_strtoul(str, NULL, base) : default_val;
 }
 
+#ifndef CONFIG_SPL_BUILD
 #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
 int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -635,6 +640,7 @@ U_BOOT_CMD(
 	""
 );
 #endif
+#endif /* CONFIG_SPL_BUILD */
 
 
 /*
@@ -656,6 +662,7 @@ int envmatch(uchar *s1, int i2)
 	return -1;
 }
 
+#ifndef CONFIG_SPL_BUILD
 static int do_env_default(cmd_tbl_t *cmdtp, int __flag,
 			  int argc, char * const argv[])
 {
@@ -1114,3 +1121,4 @@ U_BOOT_CMD_COMPLETE(
 	var_complete
 );
 #endif
+#endif /* CONFIG_SPL_BUILD */
diff --git a/common/env_common.c b/common/env_common.c
index 3e46c26..57221ef 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -231,6 +231,7 @@ int set_default_vars(int nvars, char * const vars[])
 				nvars, vars, 1 /* do_apply */);
 }
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * Check if CRC is valid and (if yes) import the environment.
  * Note that "buf" may or may not be aligned.
@@ -262,6 +263,7 @@ int env_import(const char *buf, int check)
 
 	return 0;
 }
+#endif
 
 void env_relocate(void)
 {
@@ -269,7 +271,8 @@ void env_relocate(void)
 	env_reloc();
 #endif
 	if (gd->env_valid == 0) {
-#if defined(CONFIG_ENV_IS_NOWHERE)	/* Environment not changable */
+#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD)
+		/* Environment not changable */
 		set_default_env(NULL);
 #else
 		bootstage_error(BOOTSTAGE_ID_NET_CHECKSUM);
@@ -280,7 +283,7 @@ void env_relocate(void)
 	}
 }
 
-#ifdef CONFIG_AUTO_COMPLETE
+#if defined(CONFIG_AUTO_COMPLETE) && !defined(CONFIG_SPL_BUILD)
 int env_complete(char *var, int maxv, char *cmdv[], int bufsz, char *buf)
 {
 	ENTRY *match;
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 7cf01ad..5698a23 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
 COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
 COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
 COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
 endif
 
 COBJS	:= $(sort $(COBJS-y))
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 29cbb93..40a7aca 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -196,6 +196,15 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 		spl_spi_load_image();
 		break;
 #endif
+#ifdef CONFIG_SPL_ETH_SUPPORT
+	case BOOT_DEVICE_CPGMAC:
+#ifdef CONFIG_SPL_ETH_DEVICE
+		spl_net_load_image(CONFIG_SPL_ETH_DEVICE);
+#else
+		spl_net_load_image(NULL);
+#endif
+		break;
+#endif
 	default:
 		debug("SPL: Un-supported Boot Device\n");
 		hang();
diff --git a/common/spl/spl_net.c b/common/spl/spl_net.c
new file mode 100644
index 0000000..e1596fe
--- /dev/null
+++ b/common/spl/spl_net.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2012
+ * Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+#include <common.h>
+#include <spl.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void spl_net_load_image(const char *device)
+{
+	int rv;
+
+	env_init();
+	env_relocate();
+	setenv("autoload", "yes");
+	load_addr = CONFIG_SYS_TEXT_BASE - sizeof(struct image_header);
+	rv = eth_initialize(gd->bd);
+	if (rv == 0) {
+		printf("No Ethernet devices found\n");
+		hang();
+	}
+	if (device)
+		setenv("ethact", device);
+	rv = NetLoop(BOOTP);
+	if (rv < 0) {
+		printf("Problem booting with BOOTP\n");
+		hang();
+	}
+	spl_parse_image_header((struct image_header *)load_addr);
+}